Created files in trail version now having issues using file in CS3
Hi Everyone,
Hopefully someone can answer my question. I don't have much experience with Dreamweaver, so any help would be greatly appreciated. I downloaded the free trail version of Dreamweaver CS5.5 and starting creating a new site with it. My trial version has ran out so I would like to finish the files using the Dreamweaver CS3 that I currently own. I'm able to open the files and move things around. However, when I went to the draw an new AP Div, I draw the box and it just disappears. The new div labeled #apDiv 7 shows up under CCS Styles panel but I can't get the actually box to show up on the screen even when changing the attributes on the #apDiv 7 under the CSS Rule Definition Box. I can create a new document in CS3 and draw an AP Div just fine. I'm just not sure why the files I created in the trail version are not allowing me to add this element to the layout.
Thank you.
First thing.When you post a question here it helps immensely if you post a link to the page or the code from it if it isn't online.
Working strictly in APDivs is hardly the way to build a page/site anymore. As you have seen it isn't easy or functional.
In the CSS panel there are attributes listed for the APDiv and should show the positioning X and Y as well as the width and height. If you go into your CS3 preferences, there is a tab for APDiv dimensions and location defaults.
But as I said, APDivs are a pain because you constantly have to adjust margins and padding to make them work with the content inside and stay where you want them, and when you're dealing with monitors between 1024 and more than 2300 pixels across, a page full of APDivs can become scattered all over the place on a wide screen browser.
Similar Messages
-
Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"
Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel -
I updated my ipad1 thru iTunes from 4.2.1 to 4.3.5 and now having issues, especially playing videos. Anything I should know. I have not jail broken my iPad and don't want to.
you update it by connecting it to a computer running itunes and starting itunes up on the computer clicking on it in devices and clicking on the update button in the content menu
if it say you have the latests then it's because you don't own an iphone 3gs but an iphone 3g where the version 4.2.1 was the last released
in that case you can't ever update it
http://en.wikipedia.org/wiki/IOS_version_history#Current_versions -
Have just purchased a new mac book pro, am now having issues syncing my apps to my new mac?
Have just purchased a new mac book pro, am now having issues syncing my apps to my new mac?
Welcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 -
I have a trail version, now I can not install Master Collection version
I used a trail version of Flash Catalyst and now I purchased master Collection, but when I try to use Flash Catalyst I get a messages that says the licensing for this produce has expired.
I installed Master Collection CS5 but I am not able to open Flash Catalyst.Hi DIRU,
Please have a look at this tech note, it should help:
http://kb2.adobe.com/cps/494/cpsid_49485.html
Let us know if you continue to have issues. Thank you for posting!
Kim -
Anyone having problems using, "iPhoneconfigutility
I've tried installing, reinstalling and removing and installing itunes 9.1 but the program will not start. I have clicked on the desktop shortcut, the itunes.exe in the program folder but all i get is a brief loading hourglass and then nothing. I have checked in task manager and the programs itunes.exe and ituneshelper.exe are in the processes window but the program is not visible on the desktop.
Starting some basic-principles troubleshooting here, if you're game.
The first thing to try isn't a cure in itself, but can rule out some possible causes of problems, and narrow in on others. We're going to check to see if this is a systemwide issue or if it is specific to one particular user account.
From the Start menu, choose Control Panel.
Open Add or remove user accounts (If using the Classic View in Windows Vista, open User Accounts. Then open Manage another account).
Select Create a new account and follow the instructions to complete the account setup process. Give the new user account full administrative rights.
Once the new account is created, choose Log Off from the Start menu. Log into the newly created user account. (Don't use fast user switching to move between accounts.)
Launch itunes in the new account. The setup assistant will/should run. Do not add any files when prompted to do so (if things get that far). Just let it eventually open to an empty library.
... does it eventually open to an empty library? Or do you get the same sort of behavior as in the usual user account? -
I just got a new laptop so I had to transfer everything over and I thought everything would be ok but I'm having some strange issues especially with my purchased tv shows, movies, and music videos. They just wont play. Sometimes I'll get lucky and a tv show will play but if I stop it and try again it wont. If I open in Quicktime it works fine. The computer is authorized so that shouldnt be it especially if it plays in QT and like I said sometimes I'll get lucky and one will play. Now the other thing I just noticed is all my music files play fine but when opening and looking at the info of the music file I can't edit anything for example song title or artist the area seems shaded and won't let me do any editing. So I'm having those 2 issues. Video files not playing ones that I have purchased. movies, tv shows and music videos. Also like I said if I just sit there and click one after another I may get lucky and one will play but if I stop it and try again it will not play again. And I can't seem to edit any music file which play fine. I have a new Dell with windows 7 and I have never had this happen any help would be great. The computer is authorized for i tunes so it cant be that.
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
tt2 -
Bought adobe ID is not the same as trail version, now it don't work
Hi,
First I use a trial version of Creative Cloud with ID.
Later I bought this program with another ID on the same computer.
Now it don't work.
Can anybody help?Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
RESTORED WINDOWS ,NOW HAVING ISSUES
HELLO folks, i had to reinstall windows on my comp, i thought I had backed up my itunes, at any rate i reinstalled i tunes, and when i connected my ipod it recognizes it but i can't add any songs to the ipod and how do i import my songs on ipod to itunes ?, please help, my currwent library on my ipod dos not show up in itunes ?
how do i import my songs on ipod to itunes ?
For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
my currwent library on my ipod dos not show up in itunes ?
If you click on the small triangle to the left of your iPod, do you see the "music" list? -
I am running a windows PC with XP and now can't get my pictures off my device.
Please help.Hello there, Catpkt.
The following Knowledge Base article offers some great in-depth steps to troubleshoot your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Just installed US Leopard on Arabian bought Mac and now having issues....
I purchased a Macbook Air while in Dubai last year. The keys are basically the same, but there is a very slight difference to the configuration and there are Arabic symbols next to the alphabet. I recently wiped the hard drive. When reinstalling Leopard, I decided to use a US bought version instead of the original install discs(One disk Vs. Two, I'm lazy). Now, the function keys don't work properly (they only function as F1-F12 and cannot be used to change brightness, volume, etc.) And it doesn't see the touchpad, it says it is a two button mouse, any ideas?
You need to reinstall using the discs that shipped with the MacBook Air. The retail Leopard disc may not work with the MacBook Air because it may lack the required hardware drivers.
-
Computer crashed, now having issues with syncing
Well our computer crashed. We had it fixed and I had to reinstall Itunes. I bought an app on Itunes through the computer and tried to sync it to my iPod. It told me that I have to erase everything on my iPod because you can only sync to one computer. Well I have a bunch of songs and other apps that I do not want to have to re-buy. How do I sync everything and get it all together? I am not trying to use more than one computer, my hard drive had to be completely replaced.
Welcome to the discussions,
Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer. Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
How to download apps for free again: http://support.apple.com/kb/HT2519
Music and other media you did not buy in iTunes and pictures are not part of the backup. But there are other ways to copy such content, although not supported by Apple. See this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
Purchased Imac May 2010. Display showing 5 sets of vertical lines colored green and purple. Than square spots appear equally spaced over entire screen. Is my Imac repairable?
Purchased Imac May 2010. Display showing 5 sets of vertical lines colored green and purple. Than square spots appear equally spaced over entire screen. Is my Imac repairable?
-
When adding tags to documents from within the document using the menu, after typing a few letters and then selecting a tag it then resets and you have to go back to the beginning. This is especially annoying when trying to edit a large number of documents quickly.
It seems you have to wait up to 5 secs after typing a tag before trying to add it again. The problem appears to be some system wide delay in editing the tag into the file.
I checked the problem against my new MacBook Air and it occurs there as wel.
Anyone else come across this?Hi VikingOSX,
The method you described is the current way I am doing it, my apologies I probably wasn't clear enough.
The tagging works, but the issue is that as I start to edit in the tag area, after choosing a tag(s) it resets to blank after a couple of seconds and I have to tag again. After the second time the tags stay there and I can save the document.
The tags I am choosing are from existing tags and it doesn't matter whether I click on them from the list or start typing a few characters and they appear, the problem is the same. It might seem trivial, but I regularly scan in a large number of documents and then edit their name and tags from the Preview title bar.
I would be interested if you can recreate the issue yourself, I have it on two different Mac computers so thought it was something that was a bug in Mavericks. -
GavelSnipe does not function on Firefox, but it does on I.E.8 (which I am now having to use) - why
Can get GavelSnipe onto/into Firefox and have it bookmarked. When you cut and paste an Ebay item number into GavelS and enter your max bid and ask it to be sniped, GavelS reverts you back to the sign in page and when I return to the input screen the details I last entered have not been recorded. Just loaded the same screens in IE8 and its carried out the functions perfectly
Hello Welshwoody,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.
Maybe you are looking for
-
Why aren't all incoming messages going to Gmail- Inbox, but they're in All Mail?
Sorry if this has been answered, I haven't seen a suitable answer anywhere. I have lots of incoming emails I can only view in the All Mail folder nested under Gmail, but they never showed up in Inbox. Is there a reason or setting new emails are only
-
P205-s7469 speakers not working for windows 7 64 bit
I recently upgraded from vista 32bit to windows 7 64 bit. My laptop is equiped with harman/kardon speakers, 2 main speakers and sub woofers under the laptop. The speakers worked fine under vista, now that I have windows 7 my speakers sound bad and t
-
I recently obtain a used Toshiba 32AF45 television and can't locate a manual for it. The RF coaxial jack is broken off, but I'm still able to use the RCA jacks to hook-up the kids Wii and DVD and get a great picture, but I would like to get a convert
-
TS1702 Apple keeps disabling my apple i.d. and telling me my password is wrong
Apple keeps disabling my apple i.d. and telling me my password is wrong. What do I do?
-
Lion 10.7.4 I have installed iPhoto via the iLife '11 disc provided with my macbook pro. Upon attempted opening, it states that I require the lastest update. I performed the update and attempted to open again, but receive the same message - "need upd