Created mailbox for new user in Exchange 2010, user not visible in AD.

Hi everyone!
This morning I created a mailbox for a new user on my Exchange 2010 box.
Everything works fantastically but I am unable to view the new user in AD except by searching. If I run a search the results say the user exists in my Users container, and I can view the properties of the user account from the search results, but I
am unable to actually see the user profile object in the Users container.
I notice in EMC that the mailbox has a user icon on the mailbox icon instead of the regular standard icon - I'm not sure what this implies.
Can anyone offer some advice as to why this happens and how to resolve it?
Thanks!

Hi,
AD objects store in the Domain partition Database.
Its replication Scope is :Domain Wide
Its replication model is: Multi Master
There are two possible cause.
1. AD replication latency if you have several DCs.
You could wait for AD replication or force replication, Click
refresh on ADUC.
2. You create the new user
in other OU, not Users.
You could run this command to get
the user’s DistingushedName attribution.
Get-mailbox –identity
[email protected] |fl
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Exchange OWA does not load OWA for Exchange 2010 users

I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forbidden
403- Access is denied". However exchange 2010 users can login to their /ecp directory from exchange 2013. Exchange 2010 users can use OWA using their exchange2010/owa URL without any problems. We do not have any http or https redirection enabled
on any of the server. Also I have tried to uncheck the "Required SSL" settings for default web site on both Exchange servers but error is still same. Any help will be highly appreciated.

Hi,
According to your description, your Exchange 2013 cannot proxy OWA request to Exchange 2010 server, but ECP　request　can work properly.
In this case, Ｉ'd like to confirm OWA and ECP settings on Exchange 2013 and 2010 servers before going further:
Get-OWAvituraldirectory |fl identify,*url,*authentication
Get-ECPvituraldirectory |fl identify,*url,*authentication
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 users cannot open Exchange 2013 shared mailbox

Title says it all.
We're in the process of migrating 1000+ mailboxes to Exchange 2013. A number of shared mailboxes have been migrated, but those users still on 2010 cannot open them.
Is this just how it is, or is there a way around it?

Hi,
I tested in my lab, if the shared mailbox is on Exchange 2010, I could open this shared mailbox successfully. Then I moved this shared mailbox to Exchange 2013, after that, I couldn’t open it anymore, I got the following error:
Besides, I tried to open a shared mailbox on Exchange 2013 which was not moved from Exchange 2010, it is the same error message.
Based on the test, it seems that Exchange 2010 users can’t open shared mailbox on Exchange 2013. So I recommend you move those users to Exchange 2013.
Best regards,
Belinda Ma
TechNet Community Support

Create mailbox for eDirectory user

Hello,
How can I create mailbox for an eDirectory user using Novell.Ldap ?
Which are the attributes that have to be set?
Thanks,
Veronica.

Veronica Mandache wrote:
> I have an eDirectory user and I want to create the GroupWise account for
> it(using Novell.Ldap.dll).
> There are specific LDAPAttributes that have to be set in order to create
> a GroupWise account for an eDirectory user?
> My scope is: the eDirectory user becomes GroupWise user also.
>
>
> Jim Willeke wrote:
>> Not sure what you are trying to do. Please explain.
>
>> You could a email address by adding a value to the "mail" attribute.
>> -jim
>>
>> Veronica Mandache wrote:
>>> Hello,
>>>
>>> How can I create mailbox for an eDirectory user using Novell.Ldap ?
>>> Which are the attributes that have to be set?
>>>
>>> Thanks,
>>> Veronica.
Cannot do that without buying Identity manager and the Novell Groupwise
driver for it.
GW syncs one way ----> to eDirectory. It never syncs the other way
without the above software

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15
We need to set up a hybrid server to allow us to begin moving mailboxes to Exchange Online. We created a new Server 2012 R2 server with Exchange 2013 SP1 to act as our Hybrid server. Reading the literature leaves me with questions about what
certificates I need. My understanding is that the certificates in play on the on-premise Exchange 2010 servers don't need to be changed.
I've looked at the TechNet article "Certificate requirements for hybrid deployments"
http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
Certificate requirements for the new Exchange 2013 SP1 server are still unclear to me, I think the new server needs a SAN certificate with:
Hybridserver.domain.edu
autodiscover.domain.edu
EWS.domain.edu
Can anyone clarify?

Cert is required only if you want to deploy ADFS for SSO.
Otherwise you can use your existing Cert for all the Services
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2003 users are unable to send attachments larger then 8 MB to Exchange 2010 users on the same LAN

I am migrating from Exchange 2003 to Exchange 2010.
Users who are still on Exchange 2003 cannot send attachments any larger than around 8MB to Exchange 2010 users on the same LAN.
Users on Exchange 2010 can send large attachments to fellow Exchange 2010 users without issue.
I do not have any quota restrictions on Exchange 2010.
Had a look at the Exchange 2003 Connector but could not see any reference to attachement restrictions.
Has anyone come across this?

Here is a note of the NDR:-
Your message did not reach some or all of the intended recipients.
Subject:
The following recipient(s) cannot be reached:
Tracey xxxxxx on 01/12/2014 13:27
This message is larger than the current system limit or the recipient's mailbox is full.
Create a shorter message body or remove attachments and try sending it again.
<mail.xxxxxxxxx.com #5.2.3 smtp;450 5.2.3 Msg Size greater than allowed by Remote Host>

Migrating user from Exchange 2010 to Exchange 2013 succeeds but OWA redirects to 2010

Hello everyone,
I am migrating users from exchange 2010 to 2013, Users migration works perfectly and completes without any issue but after the user migration finishes I try to login to OWA but user goes to OWA exchange 2010 not 2013 as if the mailbox has not been migrated.
I have checked the HomeMDB attribute and I can see the new database on 2013 is located there. how to solve this? I have retransfered the user back to 2010 and 2013 but it didn't work.
I would appreciate your help.
Thanks
Mohammed JH

Hi Amit
After 30 mins approximately we checked the inboxes that have been migrted (2) and we found out they are working.
İ wonder why there is this delay ? İ have already done migration before but it never took this much time. İ would appreciate your reply.
Thanks
Mohammed JH

HT2470 Why won't Itunes store my music library in my User/Music Folder, if I select my user name as a storage location in Itunes, Itunes creates folders for artist name right in my user folder, instead of in my user/music folder

Why won't Itunes store my music library in my User/Music Folder?
If I select my user name as a storage location in Itunes, Itunes creates folders for artist name right in my user folder, instead of in my user/music folder. This gets especially annoying because if I tell Itunes to store my "media" in my user/music folder, Itunes will then create a folder named "music" in my "music" folder and will also create additional folders in my user/music folder location to store other non-music media in as well. It is very annoying to see this lack of affinity for folders between two Apple created programs.

Help iTunes locate your media folder:
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967

To create req for new BOM component

hello all,
i confirm the order and now i need to add one more component to the header material for the same order.
how can i create requirement for new BOM component.
what i done is i 1st cancel the confirmation. then go for read PP mater data. after that should i run the MRP for header material to create planned order for new BOM component?
regards

Dear,
If you have execute any transaction like GI confirmation then read PP master data will not work.
Best way you can cancel the confirmation and reveres the good issue by 262 movement type. Then do TECO to the order all reservation get deleted.
Then update the BOM with new component and run MRP with planning mode-3 delete and recreated. It will create planned order then convert it to production and go ahead.
Regards,
R.Brahmankar

Exchange 2010 calendar not showing on outlook 11 Mac

Exchange 2010 calendar not showing on Outlook 11 Mac on my iMac. It shows fine on iPhone and OWA.

Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Regards.

Exchange 2010 user online archive mailbox becomes personal archive mailbox after recreated

Hi,
We are using Exchange 2010 SP2, one of our user online archive mailbox deleted and re-created fresh archive mailbox.
But, then it displaying as Personal Archive Mailbox instead Online Archive Mailbox in server and user outlook. Also, no emails moving from primary mailbox to personal archive mailbox. Checked and confirm mailbox retention policy for the user mailbox, however
there is no archive is running.
How to resolve changing to Online Archive Mailbox and continue mailbox archive?
Any help.
MD

Hi,
How did the user delete and re-create the online archive mailbox?
I suggest re-create online archive mailbox via following method:
1. Befor creating Online Archive, please perform following configuration:
Configure Exchange Online Archiving
http://technet.microsoft.com/en-us/library/hh529915(v=exchg.141).aspx
2. Then create Online Archive:
Create a Personal (On-Premises) or Cloud-Based Archive for a New Mailbox
http://technet.microsoft.com/en-us/library/dd979791(v=exchg.141).aspx
Thanks

Outlook 2013/ Exchange 2010 User Mailbox reached Limit and OWA is not reachable

Hello Folks,I have a strange Outlook/ Exchange problem with one of our Users, interestingly it’s the Boss of our company….The Background:- We have 2 Domains @company-1 or @company-2- We have 1 Exchange 2010 Server Version 14.03.0224.002- Till March of this year our Emails where hosted externally, we used to download the Emails every 2 minutes from POP3 Mailboxes into Exchange- We have 18 Users- So every User had a User account on our Exchange and a Mailbox externally- Now we host our Emails our self via MX and DNS Records(mail.company.cc)- The User kept their Exchange accounts, OWA is now working too So far all works well on my little Server farm.The Catch:Usually our users have only one Email address either @company-1 or @company-2 Except our Boss and one other User, they have an Email address in both Domains They have addresses one...
This topic first appeared in the Spiceworks Community

Hi,
I suggest to repair .ost file to check this issue by the following steps:
Exit Outlook.
In Control Panel, click or double-click Mail.
In the Mail Setup dialog box, click E-mail Accounts.
Click the Data Files tab, select the Exchange account, and then click
Open File Location. A file explorer window opens to the location of the data file for the Exchange account. The
Account Settings and Mail Setup dialog boxes will remain open, behind the file explorer window.
Close the Account Settings and the Mail Setup dialog boxes, then return to the file explorer window.
Important: be sure to close these two dialog boxes before you delete the file. If they aren't closed, Windows may display an error message about a conflict.
In the file explorer window, right-click the Exchange data file and then click
Delete. The next time you start Outlook, a new .ost file is created for the account.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

No Free/Busy Information for Exchange 2010 users in Outlook 2010 client, 2010 OWA shows this information fine

I have looked for hours and hours on Google and this web site for this type of issue and nothing seems to help.
Problem:
On my new Windows 2008 R2 /Exchange 2010 server with IIS7 installed, I can use Outlook 2010 client to login and send and receive e-mail but when I try to busy search internal Exchange users I get no information (cross-hatch), but the sender of the Meeting Request
can see their own free/busy information fine. And OWA users can see free/busy information fine, as can Outlook 2003 client users against this Exchange 2010 server when logged in.
I don't know if I have a certificate problem with regard to IIS7 or Exchange 2010, I did not create my own certificate , it is just what was installed by default when I installed and configured Win2K8 server, IIS7 and Exchange.
On the Windows 7 workstations with Outlook 2010 client, I am not logging into the Exchange 2010 server DNS domain, if that makes any difference. On these workstations I can ping "autodiscover.my.exchange.server.com" and my.exchange.server.com
with no problem. I even used this Microsoft KB to install a new _autodiscover dns entry, but it did not help :
When I turn on logging on my Outlook 2010 client, I see this in my C:\Users\Administrator\AppData\Local\Temp\1\outlook logging\20131208-135658864-fb.log :
2013/12/08 13:56:58.864: Getting ASURL
2013/12/08 13:56:58.864: URL returned from cached autodiscover: blah blah
2013/12/08 13:56:58.864: Request to URL:
2013/12/08 13:56:58.864: Request action:
2013/12/08 13:56:58.864: Request XML: <?xml version="1.0"?>
2013/12/08 13:56:59.051: Request sent
2013/12/08 13:56:59.051: Response error code: 00000000
2013/12/08 13:56:59.051: HTTP status code: 0
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: There is an error in request/response.
2013/12/08 13:56:59.051: XML response:
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: Getting ASURL
2013/12/08 13:56:59.644: Failed to get ASURL. Error 8004010F
At an Exchange shell console I enter this command and get these results :
Exchnage Management Shell :
VERBOSE: Connecting to BPExchange2010.my.exchange.server.com
VERBOSE: Connected to BPExchange2010.my.exchange.server.com.
[PS] C:\Windows\system32>Test-OutlookWebServices -id:[email protected] -TargetAddress:[email protected]
ll.com
RunspaceId : c929eacd-d53c-49d7-8532-c4b74e61b8be
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is
Type : Success
Message : [Server] Successfully contacted the UM service at https://bpexchange2010.my.exchange.server.com/ews/exchan
ge.asmx. The elapsed time was 234 milliseconds.
[PS] C:\Windows\system32>
** Also frequently when I log into Outlook 2010 client and start to send a meeting request , I get the Security Alert dialog :
autodiscover.my.exchange.server.com
Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
Green Check Mark : The security cerficate is from a trusted certifying authority
Green Check Mark: The security certificate date is valid
Red X : The name on the security certificate is invalid or does not match the name of the site.
Do you want to proceed ? . I either import the certificate or click YES, but does not help this issue.
NOTE: Each user that shows as NO INFORMATION cross-hatch, these users have appointments and have logged into outlook before.
When I do this autodiscover url from a Windows 7 pc with outlook 2010 I get :
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="14:47:01.5656198" Id="401440650">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Can anyone assist ? What am I missing ?
Thank You
NOTE: When will this go away. I had to strip out a lot of helpful information to post this. "Body text cannot contain images or links until we are able to verify your account."

Hi,
How many users encounter this issue, all users with Outlook 2010 or some specific users?
According to your post, the Error code 600 indicates that your Autodiscover service is working well. as for the certificate mismatch issue, we can also following the KB below to resolve it:
http://support.microsoft.com/kb/940726/en-us
The Free/Busy information in Exchange 2010 is using the Availability service to
retrieve it. Please directly access
https://mail.mydomain.ae/EWS/Exchange.asmx in IE and see whether a proper XML file is returned.
Or we can go to
https://testexchangeconnectivity.com and check MS Exchange Web Services Connectivity Tests.
Thanks,
Winnie Liang
TechNet Community Support

Outlook 2003 Free/Busy only shows 2 months for users on Exchange 2010

Hi,
We are moving to Exchange 2010 from Exchange 2003 and have noticed that users who have been created on or migrated to Exchange 2010 who also use Outlook 2003 can only see 2 months worth of free busy information.
After doing some testing this is only an issue if the user who is looking at the free busy is located on Exchange 2010 and they are using Outlook 2003. It doesn't matter if the mailboxes they are looking at are on Exchange 2003 or Exchange 2010.
If the user uses Outlook 2007 they see free/busy past 2 months.
We configure Outlook to publish 12 months of free/busy.
Any help would be appreciated.
Regards
Matt

Hi Matt,
According to your description, the issue only happens in Outlook 2003 but not in other Outlook versions. Please check whether there is the Auto Accept Agent installed in your Exchange server. This issue occurs when you register the Auto Accept Agent to process
meeting requests for the affected mailbox.
Here is a KB related to this issue. Please follow it to configure the period for which you want to publish Free/Busy information in a registry entry on the Microsoft Exchange Server on which you have installed the Auto Accept Agent:
The published Free/Busy information for a mailbox is displayed for the default period of two months after you have configured a longer period in Outlook
http://support.microsoft.com/kb/917687
The free/busy publish range reverts back to the default setting when you direct book a resource in Outlook 2003
http://support.microsoft.com/kb/905817
Additionally, I recommend you upgrade your Outlook 2003 clients to Outlook 2010/2013 for better working. Because Microsoft ended support for Office 2003 on April 8, 2014.
Regards,
Winnie Liang
TechNet Community Support

Outlook anywhere issue for exchange 2010 users

Hi Guys really hoping some one can help me out here.
I have just introduced 2 new exchange 2013 servers into our existing exchange 2010 environment. 1 CAS server and 1 mailbox server.
The issue i'm having is that any users that are on exchange 2010 mailbox servers can't connect to their profiles in outlook via the exchange 2013 cas box. OWA works fine and users that are on exchange 2013 mailboxes also work fine.
Authentication is set to on exchange 2013 and 2010 cas boxes to
Exchange 2013 cas
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
Exchange 2010 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
I was also wondering should I have a reg key on my exchange cas box of HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy\validports_autoconfigure_exchange ???

Thanks for the reply i have changed it to the following
Exchange 2013 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
Exchange 2010 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
and reset iis but still no luck authenticating with outlook on existing profiles or a new profile.

Created mailbox for new user in Exchange 2010, user not visible in AD.

Similar Messages

Maybe you are looking for