Created movie in 25p PAL. Can I author/export to NTSC?

Hello.
I created a movie in 25 PAL with a PAL camera. Now I hope to convert it to ntsc, if possible. Can I do this with Encore? How?
If not with Encore, can it be done upon export from my video editing software (sony vegas)?
Thanks for your time.

As far as I know, Encore does not include the type of editing function to convert from one format to another
You will have to ask in a Sony Vegas forum how to use that product, this forum is for Adobe
There are many other conversion programs... go to these sites and read to see if one will do what you want
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$90 http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$20 http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
$00 http://www.squared5.com/ MPEG Streamclip Converter
$00 http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
$00 http://www.virtualdub.org/ Mpeg to AVI Converter

Similar Messages

Docu monté sur première CC en format HD PAL. je veux l'exporter en NTSC. Dois-je recréer un projet NTSC ou puis-je l'exporter directement en NTSC?

J'ai monté un film en HD PAL. Je dois faire un export en NTSC. Est-ce que je peux lancer l'export directement depuis ce projet et media encoder se charge du reste ou est-ce qu'il vaut mieux que mon ppj soit déjà en NTSC?

Il ne sert pas à grand chose ce forum, sans vouloir être offensant....

I want to convert a movie that I've created in iMovie from PAL to NTSC.

I've created a large movie using PAL but now want to convert it to NTSC to send to my family in Canada. It took ages to create. Is there an easy way of doing the conversion? I don't want to have to do it all again.

Hi
A. Using iMovie'08 to 11 - Will not give 100% result - as You want interlaced SD-Video = NTSC
B. Converting from PAL to NTSC - is Never 100% loss free - but You lose a bit
I use iMovie HD6 or FinalCut - as they can deliver 100% over to program that converts.
• iMovie and iDVD can convert - BUT RESULT WILL BE Very POOOOR.
My notes on How I do it
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on Internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on Internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

HT204053 How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone? Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't

How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone? Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't appear.

Does any music show in the Purchased tab on the iTunes store app on your phone ? Music can't be re-downloaded in all countries, and even where it can be it will only appear whilst it remains in the store. Do you have your purchases on your computer and/or on a backup of your puchases so that you can sync them to your phone ?

Error while creating Move-In - How can i Allocate Device to Installation ?

Hello Experts,
while creating Move-In i am getting following Error "No Devices Allocated to Installation PC0301A0 on 10.03.2011"
How can i allocate device to installation, please advise where can i configure the settings and create Move-In without above error.
Regards,
Rajesh. G

Hi Bill,
Thanks for your responce it was helpfull, but i am trying to create Move-In with help of Contract Account. I was not able to create Move-In and i tried even with Bussiness Partner.
When i was trying to create Move-In with the help of Business Partner Option in Move-In i am getting error as "The required index has not been created yet in the search Engine", same is happening when i am trying for Business Partner in Business Master Data. This might be the reason for Move-In creation Error, please help me where can i configure index settings for search engine for Business Partner.
Please correct me if i am wrong.
Thanks,
Rajesh Gunda

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

I created movie using iMovies on iMac. Sent movie to iTunes on iMac. Transferred movie to iPad in iTunes. I can not find it on iPad. where should I look?

I created movie using iMovie on iMac. Sent movie to iTunes on iMac. Then sent to iPad using iTunes. I can not find it on iPad. Where should I look? When iPad is connected to iMac it shows it to be in movies. When I look under iTunes movies on iPad I get movies I can rent or buy. when I look under videos I get a blank screen

Are you looking in the Videos app? iMovie on the iPad? The Photos App? I don't use iMovie but those are the three places where you should look.

I have written an ebook that has been created for kindle. How can I export the book into iBooks author?

I have written an ebook that has been created for kindle. How can I export the book into iBooks Author?
I have tried converting the book to different files like, mobi, epub, pdf. By using an app on my iphone.
I still cannot add it to iBooks Author.
I'm stuck, Please help me!

Either use copy/paste and then format/style as desired, or take it to Pages or WORD and insert chapters - which may still require resettling.
If you're looking for a 1:1 port, with all styles and layout intact, you may be dissapointed, tho.

Can't share created movie to file in iMovie 11

I'm having trouble with the "share" feature in iMovie 11. Nothing happens when I try to share the created movie, even to theatre.

Ok I solved it myself. I just made a 2 second video and imported it to Aperture, then when I opened iMovie again, it loaded the 2 second clip as well as all the previous new videos that it won't load before.

How do I export a final cut express movie in both PAL & NTSC formats?

I am wanting to provide both a NTSC and PAL verion of a movie onto a DVD, how can I do this using final cut express?

Ok, I have successfully converted a DV-NTSC video to DV-PAL using Nattress Standards Conversion in FCE. The resulting output file (a self-contained QT movie) verfied as PAL in QuickTime movie inspector, 720x576 at 25fps and it plays perfectly, the video looks great, and the sound is in sync.
I had to figure out a workaround for one step in the documentation (Graeme uses an FCPro feature called 'nest items' that doesn't exist in FCExpress. I got around that by manually creating a second PAL sequence instead - see below).
If you're starting with an NTSC video, the basic procedure I used is this:
1 - create a PAL sequence and place the NTSC clip in that sequence (yes, that's right)
2 - create a second PAL sequence (add the word NEST to the name so you can tell which sequence is which)
3 - nest the first PAL sequence in the second PAL sequence
4 - open the second PAL sequence (the NEST) in the viewer by Control-clicking its timeline and select +Open in Viewer+
5 - apply the G Converter filter to the NEST (which is now open in the Viewer)
6 - click the filters tab in the Viewer so you can see the G Converter filter
7 - drag the +original NTSC clip+ from the Browser to the +Source Clip well+ in the filter
8 - verify that the other G Converter settings are what you need, especially that you have checked "Nested", "High Quality" and "Source is NTSC-DV" and that the convert setting is NTSC->PAL (these are the defaults, but you should verify them anyway)
9 - render the NEST sequence ... +this may take as long or longer than the length in time of your sequence+
10 - export the NEST sequence as a self-contained QT movie ... which will now be a PAL movie
One other note, the Standards Conversion filters need to be copied to the +Library > Application Support > Final Cut Express Support > Plugins+ folder (not the Final Cut Pro Support > Plugins folder as specified in the documentation)
If you are going to try this with your project, I suggest the following:
1 - edit your movie in an NTSC sequence. After completing all your edits (when you are done editing) export it as a +self-contained QT movie+ (it will be an NTSC movie)
2 - re-import the exported NTSC movie back into FCE (it will now be your complete movie as one large clip)
3 - follow the instructions above for using the G Converter filter to create the PAL version of your movie (using the re-imported movie as the only clip you will put in the first PAL sequence, and in the Source Clip well in the converter filter.)
You can use your first export (the self-contained NTSC movie) to create your NTSC DVDs; and the second export (the self-contained PAL movie) to create your PAL DVDs.

My apple ID has been hacked so I had to create a new account, how can I get my old account back??

My apple ID has been hacked so I had to create a new account, how can I get my old account back?? My iPhone and iPad are linked to the account i lost

freedone wrote:
Great! Yes mysterious is best way to describe internet eh lol. It could be that I have asked other questions that had absoulutely no relevance to the current q, onto previous questions. So I am going to look thru them all..
I did say m i s c h i e v o u s didn't I? Mysterious it is though too.
Regarding the latter, I have some tips for searching... (WARNING: I don not have a high opinion of the Forum Search abilities)
Discussion Search
https://discussions.apple.com/search.jspa?type=discussion&q=Great!&author=%2Fpeo ple%2F946207&sort=updatedAsc
The above is what is called "Space Search"
I used the first word of you above post " Great! " with a couple of filters applied - found this thread and one other
If you can think of any term you may have used, it may be of some benefit to use this search
ELSE
I am VERY fond of Google "Site Search" for all of Apple.Com and its subdomains...
a mere search for your username with quotes no brackets [ "freedone" ] yielded 313 results - but there IS another username "freedoneb" that may take up some of that real estate
https://www.google.com/?gws_rd=ssl#safe=off&q=%22freedone%22+site:discussions.ap ple.com

Need help returning correct name from a code created movie clip

Hello. I am an AS3 n00b with hopefuly a simple question I am designing a simple game in flash. This code creates an array of movie clips and asigns a picture to each one. It is a map screen. What I need is when I click on one of the created movie clips, I need it to return either the index of the clip in the array or the name of the clip. Basicaly anything I can use to tell them apart in the code. Here is the code:
import flash.display.MovieClip;
var MapLoader:Array = new Array();
var strJPGext:String = ".jpg";
var intContTileNumber:int;
var strContTilePath:String;
var intDistStartX:int = 63;
var intDistStartY:int = 64;
var intDistMultiplyY:int = 0;
var intDistMultiplyX:int = 0;
var intDistCount:int = 0;
var MapSquare:Array = new Array();
for (var i:int = 0; i < 729; i++)
         //var MapSquare:MovieClip = new MovieClip();
        MapSquare.push (new MovieClip());
        MapSquare[i].x = intDistStartX + (intDistMultiplyX * 30);
        MapSquare[i].y = intDistStartY + (intDistMultiplyY * 30);
        MapSquare[i].name = "MapSquare" + i ;
        addChild(MapSquare[i]);
        intContTileNumber = i;
        MapLoader.push (new Loader);
        strContTilePath = intContTileNumber + strJPGext;
        MapLoader[i].load(new URLRequest(strContTilePath));
        MapSquare[i].addChild(MapLoader[i]);
        intDistCount++;
        intDistMultiplyX++;
        if (intDistCount > 26){
        intDistCount = 0;
        intDistMultiplyX = 0;
        intDistMultiplyY++;
stage.addEventListener(MouseEvent.CLICK, reportClick);
function reportClick(event:MouseEvent):void
    trace("movieClip Instance Name = " + event.target.name);
Now all this works fine, it creates the map and assigns the correct picture and places them in the correct X,Y position and it is the correct grid of 27x27 squares. The problem is with the name, when I click on the movie clip, it returns "Instance2" or "Instance5" or whatever. It starts with 2 and then increases each number by 3 for each clip, so the first one is 2, then 5 then 8 and so on. This is no good. I need it to return the name that I assigned it
. If I put the code in trace(MapSquare[1]) it will return the name "MapSquare1" so I know the name was assigned, but it isnt returning.
Please assist
Thanks,
-red

Thanks for the resopnse,
I know I dont really need the name, I just need the index number of the array, but I cant figure out how to get the index name without specificaly coding for it. That is why in the listener event I use event.target.name because I dont know what movie clip is being clicked until it has been clicked on. Basically when a movie clip is clicked it needs to return which index of the array was clicked.
I could do it this way:
MapSquare[0].addEventListener(
MouseEvent.MOUSE_UP,
function(evt:MouseEvent):void {
    trace("I've been clicked!");
MapSquare[1].addEventListener(
   MouseEvent.MOUSE_UP,
   function(evt:MouseEvent):void {
     trace("I've been clicked!");
MapSquare[2].addEventListener(
   MouseEvent.MOUSE_UP,
   function(evt:MouseEvent):void {
     trace("I've been clicked!");
... ect
but that is unreasonable and it kind of defeats the purpose of having the array in the first place. The code that each movie clip executes is the same, eventualy that index will be passed into a database and the data at that primary key will be retrieved and returned to the program. So I just need to know, when one of those buttons is clicked, which one was clicked and what is its index in the array.
I am a VB programer and in VB this is very easy, the control array automatically sends its own index into the function when one of the buttons is clicked. It seems simple enough, I just dont know how to do it in action script.
Thanks again,
-red

Can I create a PDF document that can be commented on by others using READER

I have dozens (hundreds?) of PDF Books that I've purchased. Whoever created them made them so anyone using Adobe Reader 5 or better can make highlights and comments on the text. I use the feature to correct typos and send them back to the publisher. I know it can be done because I've been doing it for a few years before I ever got Adobe Standard.
So . . . My question is . . . How can I create documents like this that can be commented on using Adobe Reader? I have Adobe Standard 8 and I don't see this as a separate feature of Adobe Pro. and I'm hoping that I'm just missing the instructions on how it's done. I do not have any problem doing what I want using Adobe Standard 8 but I need to be able to make it doable in Reader so others can make comments in my documents.
Thanks for taking the time . . .
thehapster

"Enable Usage Rights in Adobe Reader" or "Extend Features in Adobe Reader"
are available with Acrobat 8 Professional / 3D version 8 or Acrobat Professional / Pro Extended respectively.
Additionally, Adobe provides a server based service (LiveCycle ES) that "enables/extends" a PDF such that Adobe Reader can be used for Comment, Review, Digital Signature, etc.
That you can use Adobe Reader to comment on PDFs means one of the above applications were used.
Because you have mentioned the PDFs are purchased PDF Books I suspect that LiveCycle ES was used.
This server based application (which has a myriad of "modules" available) is expensive so, typically, it is licensed by enterprises that need its functionality. Examples: the large publishing houses or governmental agencies (e.g., IRS).
If you move up to Acrobat Professional you will be able to "Extend Features in Adobe Reader" such that others can perform Comment & Review on your PDF documents.
As Acrobat 9.x is the current, marketed release the Professional version would be available to you via an upgrade (not to be confused with the free "updates").
Be well...

I can't authorized my iMac to store and transfer all my library of itunes

I've been synchronized my music, videos and movies through the itunes in my Macbook, I have everything on it, but recently I bought an iMac to use at home but I can't authorized this iMac to use my account to transfer or sync all my devices now (Ipad, Ipod, Iphone, etc), I already transfered all my music, videos an movies in this iMac using migration app, but at the moment that I can sync the devices simply (Ipad, Ipod and I phone)I can't autohorized this iMac, appears a message that indicates "there was an error storing your authorization information on this computer"....The require file was not found or has a permission error. Correct this permission problem and try again, or deauthorized this computer if the permission can not be changed.
The thing is thst I put my Ipad and all my library was erased...I don't know what to do...Are there someone to helpme...thanks

http://support.apple.com/kb/ts1591
http://support.apple.com/kb/TS1538

HT1498 It took 2 hours to download my rental, then when i go to play the movie it flashes loading and then authorizing. It stays stuck on authorizing. Anyone experience this?

It took 2 hours to download my rental, then when i go to play the movie it flashes loading and then authorizing. It stays stuck on authorizing. Anyone experience this?

Welcome to the Apple Community.
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Created movie in 25p PAL. Can I author/export to NTSC?

Similar Messages

Maybe you are looking for