Created new subject: HELP with WRT310N

I am not sure how to post so i have been looking for a problem simuliar to mine. I have a WRT310N and when i have 2 xboxs running at the same time it always comes up as 1 with a NAT type of MODERATE connection. Is this router a switch or is it capable of running to 2 xboxs with a open conection? I have default setting with the proper ports triggered. PLEASE HELP, i have been beating my head against the wall trying to figure this out. Once in a great while it comes up as both xboxs are open
(Mod note: Moved post and created new subject line.)
Message Edited by OnnagokorO on 01-23-2010 09:41 PM

I really think you should start a new thread on this.
it doesn't really have anything to do with this subject.
You get more response by posting a new topic as well.

Similar Messages

Folders that I had previously created and put bookmarked sites in have disappeared and Im unable to create new folders for sites I want to bookmark. I've checked the support info and it doesn't say anything about creating new subject folders?

Bookmark folders that I had previously created have disappeared so I can't access any of my bookmarks. The process I used to create new subject bookmarks doesn't seem to be there anymore. The apple support doesnt mention creating new bookmark folders or what to do if you lose your bookmark folders.

Hi,
As you just upgarded to Windows 7, please make sure SP1 is also installed on all systems and install the following hotfix rollup for Windows 7 SP1:
An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1
http://support.microsoft.com/kb/2775511/en-us
There was a known issue on Windows 7 which affected shared folders, that newly created or deleted files are not reflect in network folder immediately, which seems similar to your error. If issue still exists after SP1 and hotfix rollup please help confirm:
1. If this issue occurs only on DFS folder in accessing with \\domain.com\namespace. Could you reproduce the same issue in accessing \\server\sharefolder?
2. Will the same issue occurs after disabling Offline Files if it is enabled.
If you have any feedback on our support, please send to [email protected]

Unbale to create new document part with same document number

Number range assigned to the X Document Type is internal. I have created new document (0001) with Document Part 000 & Version 00. For same Document Number when i tried to create New Document part by mentioning Document Numner 0001, Document Part 001 and Version 00, it says Document Type X can be assigned to internal number range only.
Even I tried with following selection....
Document Number = Blank
Document Part = 001
Document Version = 00
Template:
Document = 0001
Document Part = 000
Document Version = 00
Now system is creating document with new number i.e. 0002. But we want to create another document part with same Document Number. What is the problem with internal number range for Document Number?

Hi Pradeep,
Following are the config parameter of the document type.
CM Relevnce = blank
Number assignmt= 01
Internal Number Range =02
External Number Range= blank
Number Exit =MCDOKZNR
Vers. No. Incr. =0
Version Sequence = blank
AlternativeScreen = blank
Let me know if you need anything more.
Edited by: JJSingh76 on Dec 7, 2010 7:25 PM

Creating new VM ends with Error code 3430 and 3040 in Hyper-V log. Does anyone have any insight into what might cause this?

The new VM is being created via a P2V process run from SCVVM. It reaches a completion of 60% and dies. I asked about this in another question detail of the VVM can be seen at this link:
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemgrp2vv2v/thread/71aae7dc-13b5-46f1-b794-cc1b8085541f
Running Win2008 R2 w/ Hyper-V role enabled & SCVVM 2008R2
In any event I checked the Hyper-V logs to see if they might shead any light on the problem and there were two error messages associated with the attempted conversion. The first Event ID 3430
Log Name:      Microsoft-Windows-Hyper-V-Worker-Admin
Source:        Microsoft-Windows-Hyper-V-Worker
Date:          5/23/2011 4:51:25 PM
Event ID:      3430
Task Category: None
Level:         Error
Keywords:
User:          NETWORK SERVICE
Computer:      Virtual-Mgt.amrinc-corp.local
Description:
'test1' failed to set/change partition property: The system cannot find message text for message number 0xtest1 in the message file for 18568CA2-82E9-4A9F-B462-701D8FB4C447. '0x8007013D'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
    <EventID>3430</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="3316" ThreadID="2716" />
    <Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
    <Computer>Virtual-Mgt.amrinc-corp.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <VmName>test1</VmName>
      <VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
      <ErrorCodeString>%%2147942717</ErrorCodeString>
      <ErrorCode>0x8007013D</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
And the second Event ID 3040
Log Name:      Microsoft-Windows-Hyper-V-Worker-Admin
Source:        Microsoft-Windows-Hyper-V-Worker
Date:          5/23/2011 4:51:25 PM
Event ID:      3040
Task Category: None
Level:         Error
Keywords:
User:          NETWORK SERVICE
Computer:      Virtual-Mgt.amrinc-corp.local
Description:
'test1' could not initialize. (Virtual machine ID 18568CA2-82E9-4A9F-B462-701D8FB4C447)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
    <EventID>3040</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
    <EventRecordID>2</EventRecordID>
    <Correlation />
    <Execution ProcessID="3316" ThreadID="2716" />
    <Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
    <Computer>Virtual-Mgt.amrinc-corp.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<UserData>
    <VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <VmName>test1</VmName>
      <VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
    </VmInitialize>
</UserData>
</Event>
I have blownout the server and reinstalled the operating system and SCVVM and applied all the current updates to no avail. I have the exact same issue again. The problem seem to be at least on the serface an authority problem because I have no problem creating
new VM via the P2V process on an old Virtual Server running on Win2003R2.
Oh yes I can create new virtual machines on the system in question and move them to the library as was suggested to verify in a Blog post so I am really wondering what the problem is?
Configuration Analyzer Just gave me a warning about reporting not being setup on the VVM which it isn't so no suprise there?
Any information that might help me figure this would be greatly appreciated

I've looked at both threads, and there simply isn't enough information for me to tell you what is wrong. Please collect a trace (instructions in General forum) and open a case with CSS. CSS can provide more in depth analysis than what a forum
post allows.
As a shot in the dark, I have seen the issue outlined in the following KB article cause this exact same error message and symptom,
http://support.microsoft.com/kb/967902
Best Regards, Mike Briggs [MSFT] -- posting provided "AS IS" with no warranties and confers no rights

Creating a search help with SAP UI5 and js?

Hello com,
I am trying to create a search help, collecting data from a table.
Is there something similar to the typical ABAP search help in SAP UI 5?
ABAP:
PARAMETERS: lv_alias TYPE dsh_alias MATCHCODE OBJECT dashboard_alias_f4,
I found this in the Demo Kit:
// create a simple SearchField
var oSearch = new sap.ui.commons.SearchField("providerSearch", {
        searchProvider: new sap.ui.core.search.OpenSearchProvider({
                suggestType: "json",
                suggestUrl: "/demokit/suggest?q={searchTerms}",
                icon: jQuery.sap.getModulePath("sap.ui.core", '/') + "mimes/logo/txtonly_16x16.ico"
        search: function(oEvent){
                alert("Search triggered: " + oEvent.getParameter("query"));
//attach it to some element in the page
oSearch.placeAt("sample4");
But how can i connect it with the specifiy data table?
Thanks,
Domenik

Hi,
you need to create OData service which will retrieve (search) the required information and then need to create UI5 application to consume it.
you can refer this blog How to Implement Value Help (F4) with SAP UI5 which covers both parts.
if you are having SP08 version of SAP Gateway then creating search help is very simple. refer my blog Creating OData service based on Search Help
Regards,
Chandra

Creating new Layout problem with merged table within std_resources.htm

Dear All,
i am relatively new to oracle ucm and i am trying to add new comonent to create new layout from oracle Create and Modify Layout Sample Component* example under http://www.oracle.com/technetwork/middleware/content-management/index-092832.html .
i want to ask about the following
in this component i have CreateLayout_Layouts Table, CreateLayout_PublishedWeblayoutFiles Table and CreateLayout_PublishedStaticFiles Table. These tables should be merged with LmLayouts table, PublishedWeblayoutFiles table and PublishedStaticFiles table respectively in the std_resources.htm file in the <install_dir>/shared/config/resources directory.
The problem is in my std_resources.htm file i have the following :
<tr>
     <td>LmLayouts</td><td>LmLayouts</td><td>LmLayouts</td><td>id</td><td>label</td>
     <td></td><td>7.3</td><td>1</td>
</tr>
how can i add (merge) the CreateLayout_Layouts Table in LmLayouts table? what is should fill the <td>s ?
for PublishedWeblayoutFiles table and PublishedStaticFiles table they are not exist in my std_resources.htm file. are there names changed? or shall i add them(if yes, what is the <td>s had inside).
note: i will be greatfull if someone have the std_resources.htm that have the above tables merged with the specified ones.

I believe that sample is old. i have been pushing to get an updated version out also. Hopefully the fragmentary information I will give here will help.
The main changes are dynamic data tables which replace the includes to control the menu items and relationships. The old things should work still but good to use the new. At the end is an example of merge rules.
See 3.5.2 Dynamic Data Tables
http://docs.oracle.com/cd/E21764_01/doc.1111/e10807/c03_components.htm
==============================
CoreMenuItemRelationships table example
<?commatable mergeKey="primaryKey" derivedColumns="primaryKey:parentId+id"?>
parentId,           id,                loadOrder
MY_CONTENT,      NEW_PAGE,                9000
================================
CoreMenuItems table example
<?commatable mergeKey="primaryKey" derivedColumns="primaryKey:parentId+id"?>
id,                label,                linkType,           linkData
NEW_PAGE,                    wwNewPage,                    cgi,                IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=NEW_PAGE
============================
CoreMenuItemsFlags table example
<?commatable indexedColumns="id"?>
id, flags
WORK_IN_PROGRESS, isSubAdmin
=======================
CoreMenuItemsImages table example
<?commatable indexedColumns="id"?>
id, image, imageOpen
ACTIVE_WORKFLOWS,      ReviewContent.gif,
Glue file example: (note I am not willing to upload a zip file of a full component sorry)
<?hda version="11gR1-dev" jcharset="UTF8" encoding="utf-8"?>
@Properties LocalData
ComponentName=NewLayout
blDateFormat=M/d/yyyy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAmerica/Chicago
hasPreferenceData=0
preventAdditionalComponentDowngrade=0
serverVersion=7.1
version=2011_11_13-dev
@end
@ResultSet ResourceDefinition
4
type
filename
tables
loadOrder
resource
resources/newlayout_resource.htm
null
10
template
templates/newlayout_template.hda
null
10
resource
resources/newlayout_strings.htm
null
10
@end
@ResultSet Filters
4
type
location
parameter
loadOrder
@end
@ResultSet MergeRules
4
fromTable
toTable
column
loadOrder
NewLayout_Layouts
LmLayouts
id
10
NewLayout_PublishedWeblayoutFiles
PublishedWeblayoutFiles
path
10
NewLayout_PublishedStaticFiles
PublishedStaticFiles
null
10
NewLayout_LayoutSkinPairs
LmLayoutSkinPairs
null
10
NewLayout_Templates
IntradocTemplates
name
10
@end
@ResultSet ClassAliases
3
classname
location
loadOrder
@end

EP6.0.2 Create new workflow template with graphical editor

Hi!
In the EP6 Content (Administration -> Workflow Content -> Workflow Templates) you can find an iview to generate templates for ad-hoc (java-) workflows.
After installation the button "Create New Template" is disabled.
How can I configure the EP to create new template with graphical editor? Or should I wait till SP4 is rleased?
Regards,
Henric

Hi Henric,
We have had to develop our own way of creating templates. This area seems to be very underdeveloped at the moment.
Paul

Create new MySQL Database with SQL

I have a simple question, :-)
how can I create a new MySQL Database with SQL - (JDBC)
can you show me a code example?
tank you ...

okay ... but how do I use the URL ??? that's the problem
I tried this:
Connection con   = null;
        Vector vct       = new Vector();
        try{
            String drv = "org.gjt.mm.mysql.Driver";
            String url = "jdbc:mysql://111.222.333.444:3306";
            String name = "myname";
            String pass = "mypass";
            Class.forName(drv);
            con = DriverManager.getConnection(url,name,pass);
            String statement = "CREATE DATABASE TestDB_Don1";
            Statement stm = con.createStatement();
            stm.execute(statement);
            stm.close();
            con.close();
        catch(Exception e){ e.printStackTrace(); }but it doesen't work ............. what is wrong ?

Create new project files with uploaded word document

How do I create a new project file with an uploaded word document. I tried to follow the guidelines using the Robohelp PDF file but after I upload the word document, I cannot see it in the workspace. Are there other steps to bring the document into Robohelp 9. I am using the trial version and have never used Robohelp before.
Thank you!

I was finally able to fix my problem and I hope to publish this in as many pages as I can. First I had the exact same issue. My file was password protected (the one I used as a shell for a new project) spent two hours of work, went home and next
day “Nothing” same errors. Cannot open file etc. etc. So after two hours searching the net I found this company that has a
Project Repair Toolbox that is cloud based for FREE (no useless downloads).
I went in > It asked me for the file that I had on my local drive > prompted me for the password and > BAM! the file opened right up. Since it as viewer only I was able to at least begin re-typing the project plan which was small in nature.
Check it out, hope it works for you.
http://www.project.repairtoolbox.com/

**New** Need help with your email?

If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
Each step includes a helpful picture to keep you right.
We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

- Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

New computer ~ Help with setting up

Hi everyone, Newbie here!
I am going to set my new computer up tomorrow. The computer I am using at present was installed and set up by someone else so this will be a great learning curve for me. Also I had Infinity installed by the engineer.
Is everything I need to install relating to my broadband available to download? What do I need altogether? I spoke to a BT chap on the phone and he said he would help by remote access. I am a bit nervous of this!
I need to ensure my computer is safe and secure and it all seems technically daunting. Norton security came with my Microsoft Office package. Is this better than McAfee (Net Protect Plus), do I need both? What about a key code scrambler (someone mentioned this to me). As you can see I need reassurance and help arghhhhhhh.
A step by step guide would be great!
Thanks
Solved!
Go to Solution.

It is best not to install any of the BT software, just connect your computer to the BT Home hub using an Ethernet cable, or by using the wireless key, if its a wireless connected computers.
See http://bt.custhelp.com/app/answers/detail/a_id/14964/~/getting-started-with-wireless
Using a direct cable connection is best, if you want to get maximum speed.
I would not allow anyone remote access, but if you have no choice, and cannot resolve the issue any other way, then make sure that it is as a direct result of you ringing BT, and not some random person ringing you at home, pretending to be from BT or even Microsoft.
Many people have been caught out by that type of call, and had their computer infected with spyware.
If you already have a trial version of Norton Security, then by all means use it until it expires, then uninstall it.
After that, you have the choice of using the free Microsoft Security Essentials, which is preferred by many forum members, or using BTs Netprotect which is free with some broadband packages. This has been known to make computers run more slowly though.
That is all you need.
If you have any problems, then please return here.
If you have any problems with BT Infinity, then please visit the Infinity board on this forum.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Create new payment terms with multiple breakdown of payment

Hi Gurus,
I'm creating new payment terms like this:50% Down Payment; 20% upon delivery; 20% completion & installation; 10% retention
How can I create this kind of payment terms?
Hoping to your suggest
Thanks,
Marina

HI
Use OBB9 to create installment payment terms,
Use OBB8 to create the payments
Assign the repective installement payment terms to the primary payment terms at OBB8
regards
Prasanna

Create New Test Database with all permissions

Hi all,
We have a Oracle9i database running on Linux platform . Currently 40 users working on it. Now i want to create another test database with giving all permissions to it. Give your valuable suggestions.
Regards,
Sudarshanam

The answer to your question as I understand now would be,
grant DBA to <user>;
But I think you mean something else. Please be more clear

Is there a way for the Yosemite maps app to add address to an existing contact (in contacts app) instead of creating new contact record with blank name (not useful)?

I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter

I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter

Failing to create new SQL farm with FSconfig.exe for ADFS federation Services on an Azure SQL

I'm building ADFS in Azure. My plan is to use the Azure SQL. The problem is that FSconfig seams not to work with Azure SQL. Here's what i did untill now:
- I followed the documentation and created a new login and user (adfslogin, adfsuser) in a new
"adfsv21" database. Then i added the user to db_owner role.
- From c:\windows\adfs i run FSconfig: FSConfig.exe CreateSQLFarm /ServiceAccount mysa /ServiceAccountPassword ******** /SQLConnectionString "database=Adfsv21;server=[azureServer];User Id=mysa;Password=********" /AutoCertRolloverEnabled. I
tried it with both accounts, mysa and adfsuser with the same poor results.
The result is: "The following error occurred: The specified service account mysa is not valid. Specify
a different service account, and try again."
- I configured odbc and tested the connection. mysa can connect but adfsuser caanot. Why?
To be short, its not working. See this post with similar problems: google to "SQL server farm configuration error"...
So, is Azure SQL & ADFS not complatible? Really not?

My apologies for take a super long time to reply. Are you still having issues here? How can we help?
Thanks Guy

Created new subject: HELP with WRT310N

Similar Messages

Maybe you are looking for