Created policies does not match except Global Acces Policy
Hello,
I'm having an issue with our IronPort C160 web proxy. When I create new access policies and use one identity created by me,
the policy does not match even the user matches the identity used in this access policy. The user falls under Global Access Policy.
Model: S160
Version: 7.1.1-027 for Web
Any idea ? Any AsyncOS bug ?
Best Regards,
Hello Jaki,
First of all thank you for your reply. I have tested also using no authentication but it's the same thing. Now I'm noticing even the right Identity does not match, and the user always match the default identity.
Please have a look to the file containg the access logs.
I have tried with a user named test3 for a website that fall under the category Dating (www.eharmony.com). Normally the user should match TestPolicy policy and the page should be blocked but it does not and fall under default policy that allow the page to be viewed by the user.
It seems a thing very easy to configure and I don't know why it does not function. Maybe that I have to do any other configuration :S ?
Best Regards,
Ilir
Similar Messages
-
Xorg- Nvidia card- CRT Monitor- No. of created screens does not match.
Hi, all.
Did a new install of Arch on a spare PC the other day. I'd forgotten how great the distro was. I've run it for a few days and am happy with the X environment etc, so decided it's time to install Arch on my main PC.
The installation went fine and I rebooted into my new environment. I added a user and moved onto installing X.
I followed the wiki and started off just using the VESA driver, as I don't have any need for amazing graphics acceleration. I got a message from my monitor saying 'Out of Sync' (or similar). I half expected this, as it happens sometimes when I install new distros and X doesn't automatically configure my Sun GDM-5410 monitor correctly.
I usually follow this by running 'Xorg -configure' and copying the new config file to /etc/X11/xorg.conf.
For some reason that didn't work. I got an error message saying 'Number of created screens does not match number of detected devices'.
I've done some searching for solutions and installed the Nouveau driver, but I just can't seem to get X to work.
Can anyone help?
Many thanks,
Chris.and if you try this? (not a solution, but could be a start)
delete your /etc/X11/xorg.conf (you can generate a new one later if needed )
make a file like this:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "Monitor"
Identifier "MySunMonitor"
VendorName "Sun Microsystems"
ModelName "GDM-5410"
DisplaySize *** see in link ***
HorizSync *** see in link ***
VertRefresh *** see in link ***
Option "dpms"
EndSection
Section "Device"
Identifier "*** as in /etc/X11/xorg.conf.d/20-nouveau.conf ***"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Screen0"
Device "*** as in /etc/X11/xorg.conf.d/20-nouveau.conf ***"
Monitor "MySunMonitor"
DefaultDepth 24 #Choose the depth (16||24)
SubSection "Display"
Depth 24
Modes "1024x768_75.00" #Choose the resolution
EndSubSection
EndSection
link:
http://www.sunshack.org/data/sh/2.0/inf … t_CRT.html -
Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
KrisHi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..
Hi,
We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
The original production database was called DC20 and our new test database is called SD20.
Looking at the logs after the import we're seeing this error:
"ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
"If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
$ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
In case its needed, heres my Export parameter file
"FULL=Y
DIRECT=Y
LOG=E:\Exports\DC20\Log\expDC20.LOG
FILE=E:\Exports\DC20\Data\DC20.DMP"
and heres my Import parameter file
"FULL=Y
COMMIT=Y
GRANTS=N
IGNORE=Y
BUFFER=500000
FILE=E:\Imports\SD20\data\SD20.dmp
LOG=E:\imports\SD20\log\impSD20.LOG"
Thanks for your help!Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route.. -
Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen -
Java.lang.Exception: Number of responses does not match queries
Hi,
We recently installed Oracle Database 10g Release 10.2.0. Installation and everything else was ok. When we try to access the Database Console(Enterprise Manager) we are getting the following error on the top:
"java.lang.Exception: Number of responses does not match"
and it doesn't show the Host CPU graph and Active Sessions graphs. Else everything is ok. Database is also up and running. We can perfome all the tasks.
Any idea what could be the possible reason and solution for it.
Thanks and Regards
Inderjeet SinghDid you ever figure out the cause of this error message? If not, does anyone else have an idea what may be causing this to occur. I also just finished an install and have experienced the same condition.
thanks,
edl -
While trying to establish a SSL Link to a URL Connection, I got an IO
Exception "Server Certificate subjectDN CommonName received does not match
Server hostname" on the destConn.getOutputStream().
What does this mean? And how do I fix it?
System.setProperty("https.proxyHost", "xxxx");
System.setProperty("https.proxyPort", "0000");
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
URL destURL = new URL("URLaddress");
URLConnection destConn = destURL.openConnection();
((java.net.HttpURLConnection)destConn).setRequestMethod("POST");
destConn.setDoInput(true);
destConn.setDoOutput(true);
URLin = new PrintWriter( new BufferedWriter(
new
OutputStreamWriter(destConn.getOutputStream())));Hi,
I was wondering if there was a solution for this. I am using the certficates and
keys that came with the installation of 6.1. Do I have to regenerate them in order
to use them in weblogic. I am getting this same error when I try to run the SSLClient
class in the examples.security.sslclient.
Jerry <[email protected]> wrote:
Hi Terry,
The server-side certificate has a DN (distinguished name) embedded in it.
This usually looks like a full hostname -- something like www.mycomputer.com
When you make the reaquest
URL destURL = new URL("URLaddress");
The string for "URLaddress" should match the DN of the certificate on the
server that you are requesting a connection to. It needs to match because
there is a compare of the DN in the cert, to the requested host.
In other words, if you are connecting to www.mycomputer.com, then the server
running on www.mycomputer.com should have a certificate with the DN
www.mycomputer.com
Then, when the match of the certificate DN to the requested host is done,
it
will succeed.
Right now, this match appears to be failing for you.
Cheers
Joe Jerry
Terry Treadwell wrote:
While trying to establish a SSL Link to a URL Connection, I got an IO
Exception "Server Certificate subjectDN CommonName received does not match
Server hostname" on the destConn.getOutputStream().
What does this mean? And how do I fix it?
System.setProperty("https.proxyHost", "xxxx");
System.setProperty("https.proxyPort", "0000");
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
URL destURL = new URL("URLaddress");
URLConnection destConn = destURL.openConnection();
((java.net.HttpURLConnection)destConn).setRequestMethod("POST");
destConn.setDoInput(true);
destConn.setDoOutput(true);
URLin = new PrintWriter( new BufferedWriter(
new
OutputStreamWriter(destConn.getOutputStream()))); -
IWeb 09 published site does not match what I've created!
So after working countless hours on a website, I finally finished it and used Cyberduck to upload the files. Once it finished I was so excited to check out the website only to find that a lot of the content does NOT match what I have created on my desktop iMac. Even widgets youtube and html snippets aren't working, but are working fine within iWeb as I have created the site. The fonts have uploaded all wrong and even borders and frames look different or aren't there all together. Also, the Google Map widget is causing some error through cyberduck upload and says it can't load it. How come my iWeb site looks great on my computer, but is totally hosed when uploaded to the FTP server? I'm freaking out and am desperate for help.
The website is www.mikewarobickgolf.com
I'm running Lion as well.
What do I need to do to get all the content of my iWeb site uploaded properly to the server? Please help!
If I am already screwed from running iWeb 09 with Lion, can you recommend an iWeb replacement? I'd rather get the site up now with iWeb and work on replacing it a later time if at all possible.You need to upload the Scripts folder to get your Widgets to work.
Try getting the full embed code for your Google map and pasting it into the HTML Snippet rather than use the Widget. According to Cyclosaurus ( the only person outside of Apple who seems to understand widgets), the Google maps widget won't work when MobileMe closes down at the end of the month.
I don't recommend any of these apps. As long as iWeb functions OK after the end of the month, I would continue using it until something better comes along.
In theory, Flux is probably the best bet since its a hybrid of code entry and drag and drop. In my opinion its too complicated and is not going to produce leaner code unless the user learns how to work with an external stylesheet. By the time you add inline styles and all that positioning info you're going to end up with more bloated code than an iWeb created site!
I don't know why someone can't come up with an app like iWeb that will utilise an external stylesheet and uses code injection and plugins. The big problem with iWeb is that apple didn't allow third party developers to create new widgets and responsive templates.
The main reason that I stopped using iWeb for new sites is that it can't produce responsive designs for mobile devices such as the iPhone. To extend its life, I did come up with an idea for producing a mobile version which may help some iWeb users...
http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html -
Please help
I no longer have the email address associated with my iCloud and do not remember my password. I created a new Apple ID but it does not match my iCloud. How do I fix this?If you can't remember your password then see if you can get it reset via http://iforgot.apple.com
If you can't get it reset via that page then try contacting Support in your country and see if they can reset it for you : http://support.apple.com/kb/HT5699 -
Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
ThanksHi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected] -
Header ID does not exist on this record or does not match ID
Hi ,
I'm trying to import the sales order using OE_ORDER_PUB.process_order() API. If all my orders has equal no. of lines, I can able to import all the orders at one stoke. But if each order has different no. of lines, I'm unable to import all the orders at single stoke. At first run, certain no. of records are getting processed and remaining records are ending up with error stating *'Header ID does not exist on this record or does not match ID specified on header record. You require a valid header ID if the operation is Create*'. If I re-execute the errored records, its getting processed successfully.
Please help me in getting it resolved.
Find below the procedure code which I'm using to import sales order.
CREATE OR REPLACE PROCEDURE XXRT_SALES_ORDER (ERRBUF VARCHAR2, RETCODE NUMBER)
AS
l_header_rec OE_ORDER_PUB.Header_Rec_Type;
l_line_tbl OE_ORDER_PUB.Line_Tbl_Type;
l_line_adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type;
l_return_status varchar2(200);
l_msg_count number;
l_msg_data varchar2(20000);
l_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type;
l_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type;
l_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type;
l_Header_price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type;
l_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type;
l_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type;
l_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type;
l_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type;
l_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type;
l_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type;
l_Line_price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type;
l_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type;
l_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type;
l_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type;
l_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type;
l_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type;
l_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type;
l_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type;
v_remarks varchar2(250);
v_count number;
v_transaction_type number;
v_cust_id number;
v_invoice_to number;
v_ship_to number;
v_itemid1 number;
v_itemid2 number;
v_itemid3 number;
v_itemid4 number;
v_itemid5 number;
v_item_type1 varchar2(15);
v_item_type2 varchar2(15);
v_item_type3 varchar2(15);
v_item_type4 varchar2(15);
v_item_type5 varchar2(15);
cursor c_data_val is select * from XXSC_SALES_ORDER_IMPORT
where process_flag='N';
cursor c_data is select * from XXSC_SALES_ORDER_IMPORT
where process_flag='N';
Begin
fnd_global.apps_initialize(1681,51411,660);
for c_data_val_rec in c_data_val
loop
v_remarks:=NULL;
select count(*) into v_count from apps.oe_order_headers_all
where cust_po_number=c_data_val_rec.iwb_no;
if v_count > 0 then
v_remarks:='Customer PO already used';
end if;
BEGIN
select transaction_type_id into v_transaction_type
from apps.OE_TRANSACTION_TYPES_tl
where name like c_data_val_rec.BILL_TO||'-DOMESTIC';
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_remarks:=v_remarks||'Invalid trans type';
END;
BEGIN
select cust_account_id into v_cust_id
from apps.hz_cust_accounts hca,
apps.hz_parties hp
where hca.party_id=hp.party_id
and hp.party_name=c_data_val_rec.CUSTOMER_NAME;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_remarks:=v_remarks||'Invalid Customer name';
END;
BEGIN
select SITE_USE_ID into v_invoice_to
from apps.hz_parties hp,
apps.hz_party_sites_v hps,
apps.hz_cust_acct_sites_all hcasa,
apps.hz_cust_site_uses_all hcsua
where
party_name=c_data_val_rec.CUSTOMER_NAME
and hp.party_id=hps.party_id
and hps.address1 like '%'||c_data_val_rec.BILL_TO||'%'
and hps.site_use_type='BILL_TO'
and hps.party_site_id=hcasa.party_site_id
and hcasa.cust_acct_site_id=hcsua.cust_acct_site_id
and SITE_USE_CODE='BILL_TO'
and hcsua.Status='A';
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid BILL_TO';
END;
BEGIN
select SITE_USE_ID into v_ship_to
from apps.hz_parties hp,
apps.hz_party_sites_v hps,
apps.hz_cust_acct_sites_all hcasa,
apps.hz_cust_site_uses_all hcsua
where
party_name=c_data_val_rec.CUSTOMER_NAME
and hp.party_id=hps.party_id
and hps.address1 like '%'||c_data_val_rec.SHIP_TO||'%'
and hps.site_use_type='SHIP_TO'
and hps.party_site_id=hcasa.party_site_id
and hcasa.cust_acct_site_id=hcsua.cust_acct_site_id
and SITE_USE_CODE='SHIP_TO'
and hcsua.Status='A';
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid SHIP_TO';
END;
IF c_data_val_rec.item1 is not null then
BEGIN
select distinct inventory_item_id into v_itemid1
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item1;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid ITEM1';
END;
BEGIN
select distinct Item_type into v_item_type1
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item1;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid Itemtype1';
END;
END IF;
IF c_data_val_rec.item2 is not null then
BEGIN
select distinct inventory_item_id into v_itemid2
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item2;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid ITEM2';
END;
BEGIN
select distinct Item_type into v_item_type2
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item2;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid Itemtype2';
END;
END IF;
IF c_data_val_rec.item3 is not null then
BEGIN
select distinct inventory_item_id into v_itemid3
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item3;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid ITEM3';
END;
BEGIN
select distinct Item_type into v_item_type3
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item3;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid Itemtype3';
END;
END IF;
IF c_data_val_rec.item4 is not null then
BEGIN
select distinct inventory_item_id into v_itemid4
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item4;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid ITEM4';
END;
BEGIN
select distinct inventory_item_id into v_item_type4
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item4;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid Itemtype4';
END;
END IF;
IF c_data_val_rec.item5 is not null then
BEGIN
select distinct inventory_item_id into v_itemid5
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item5;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid ITEM5';
END;
BEGIN
select distinct inventory_item_id into v_item_type5
from apps.mtl_system_items_b
where segment1=c_data_val_rec.item5;
EXCEPTION
WHEN OTHERS THEN
v_remarks:=v_remarks||'Invalid Itemtype5';
END;
END IF;
IF v_remarks is not null then
update XXSC_SALES_ORDER_IMPORT
set process_flag='E', remarks=v_remarks
where iwb_no=c_data_val_rec.iwb_no;
commit;
END IF;
end loop;
for c_data_rec in c_data
loop
select transaction_type_id into v_transaction_type
from OE_TRANSACTION_TYPES_tl
where name like c_data_rec.BILL_TO||'-DOMESTIC';
select cust_account_id into v_cust_id
from hz_cust_accounts hca,
hz_parties hp
where hca.party_id=hp.party_id
and hp.party_name=c_data_rec.CUSTOMER_NAME;
select SITE_USE_ID into v_invoice_to
from hz_parties hp,
hz_party_sites_v hps,
hz_cust_acct_sites_all hcasa,
hz_cust_site_uses_all hcsua
where
party_name=c_data_rec.CUSTOMER_NAME
and hp.party_id=hps.party_id
and hps.address1 like '%'||c_data_rec.BILL_TO||'%'
and hps.site_use_type='BILL_TO'
and hps.party_site_id=hcasa.party_site_id
and hcasa.cust_acct_site_id=hcsua.cust_acct_site_id
and SITE_USE_CODE='BILL_TO'
and hcsua.Status='A';
select SITE_USE_ID into v_ship_to
from hz_parties hp,
hz_party_sites_v hps,
hz_cust_acct_sites_all hcasa,
hz_cust_site_uses_all hcsua
where
party_name=c_data_rec.CUSTOMER_NAME
and hp.party_id=hps.party_id
and hps.address1 like '%'||c_data_rec.SHIP_TO||'%'
and hps.site_use_type='SHIP_TO'
and hps.party_site_id=hcasa.party_site_id
and hcasa.cust_acct_site_id=hcsua.cust_acct_site_id
and SITE_USE_CODE='SHIP_TO'
and hcsua.Status='A';
IF c_data_rec.item1 is not null then
select distinct inventory_item_id into v_itemid1
from apps.mtl_system_items_b
where segment1=c_data_rec.item1;
select distinct Item_type into v_item_type1
from apps.mtl_system_items_b
where segment1=c_data_rec.item1;
ELSE
v_itemid1:= null;
v_item_type1:= null;
END IF;
IF c_data_rec.item2 is not null then
select distinct inventory_item_id into v_itemid2
from apps.mtl_system_items_b
where segment1=c_data_rec.item2;
select distinct Item_type into v_item_type2
from apps.mtl_system_items_b
where segment1=c_data_rec.item2;
ELSE
v_itemid2:=null;
v_item_type2:= null;
END IF;
IF c_data_rec.item3 is not null then
select distinct inventory_item_id into v_itemid3
from apps.mtl_system_items_b
where segment1=c_data_rec.item3;
select distinct Item_type into v_item_type3
from apps.mtl_system_items_b
where segment1=c_data_rec.item3;
ELSE
v_itemid3:=null;
v_item_type3:=null;
END IF;
IF c_data_rec.item4 is not null then
select distinct inventory_item_id into v_itemid4
from apps.mtl_system_items_b
where segment1=c_data_rec.item4;
select distinct Item_type into v_item_type4
from apps.mtl_system_items_b
where segment1=c_data_rec.item4;
ELSE
v_itemid4:= null;
v_item_type4:= null;
END IF;
IF c_data_rec.item5 is not null then
select distinct inventory_item_id into v_itemid5
from apps.mtl_system_items_b
where segment1=c_data_rec.item5;
select distinct Item_type into v_item_type5
from apps.mtl_system_items_b
where segment1=c_data_rec.item5;
ELSE
v_itemid5:= null;
v_item_type5:= null;
END IF;
l_header_rec := OE_ORDER_PUB.G_MISS_HEADER_REC; -- Required attributes (e.g. Order Type and Customer)
l_header_rec.order_type_id := v_transaction_type;
l_header_rec.ordered_date := c_data_rec.iwb_date;
l_header_rec.sold_to_org_id := v_cust_id;
l_header_rec.price_list_id := 93174;
l_header_rec.cust_po_number := c_data_rec.iwb_no;
l_header_rec.ship_to_org_id := v_ship_to;
l_header_rec.invoice_to_org_id := v_invoice_to;
l_header_rec.CONTEXT:='566' ;
l_header_rec.ATTRIBUTE1:=c_data_rec.DELIVERY_TYPE;
-- l_header_rec.freight_term_code = NULL;
l_header_rec.operation := OE_GLOBALS.G_OPR_CREATE;
-- FIRST LINE RECORD. Initialize record to missing
if c_data_rec.item1 is not null and
c_data_rec.item2 is not null and
c_data_rec.item3 is not null and
c_data_rec.item4 is not null and
c_data_rec.item5 is not null then
l_line_tbl(1) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(1).inventory_item_id :=v_itemid1;
l_line_tbl(1).ordered_quantity := c_data_rec.quantity1;
l_line_tbl(1).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(1).UNIT_SELLING_PRICE := c_data_rec.price1;
l_line_tbl(1).UNIT_LIST_PRICE := c_data_rec.price1;
l_line_tbl(1).attribute13:= v_item_type1;
l_line_tbl(1).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- SECOND LINE RECORD
--elsif c_data_rec.item2 is not null then
l_line_tbl(2) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(2).inventory_item_id := v_itemid2;
l_line_tbl(2).ordered_quantity := c_data_rec.quantity2;
l_line_tbl(2).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(2).UNIT_SELLING_PRICE := c_data_rec.price2;
l_line_tbl(2).UNIT_LIST_PRICE := c_data_rec.price2;
l_line_tbl(2).attribute13:=v_item_type2;
l_line_tbl(2).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- THIRD LINE RECORD
--elsif c_data_rec.item3 is not null then
l_line_tbl(3) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(3).inventory_item_id := v_itemid3;
l_line_tbl(3).ordered_quantity := c_data_rec.quantity3;
l_line_tbl(3).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(3).UNIT_SELLING_PRICE := c_data_rec.price3;
l_line_tbl(3).UNIT_LIST_PRICE := c_data_rec.price3;
l_line_tbl(3).attribute13:=v_item_type3;
l_line_tbl(3).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- FOURTH LINE RECORD
--elsif c_data_rec.item4 is not null then
l_line_tbl(4) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(4).inventory_item_id := v_itemid4;
l_line_tbl(4).ordered_quantity := c_data_rec.quantity4;
l_line_tbl(4).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(4).UNIT_SELLING_PRICE := c_data_rec.price4;
l_line_tbl(4).UNIT_LIST_PRICE := c_data_rec.price4;
l_line_tbl(4).attribute13:=v_item_type4;
l_line_tbl(4).operation := OE_GLOBALS.G_OPR_CREATE;
--END IF;
-- FIFTH LINE RECORD
--elsif c_data_rec.item5 is not null then
l_line_tbl(5) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(5).inventory_item_id := v_itemid5;
l_line_tbl(5).ordered_quantity := c_data_rec.quantity5;
l_line_tbl(5).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(5).UNIT_SELLING_PRICE := c_data_rec.price5;
l_line_tbl(5).UNIT_LIST_PRICE := c_data_rec.price5;
l_line_tbl(5).attribute13:= v_item_type5;
l_line_tbl(5).operation := OE_GLOBALS.G_OPR_CREATE;
elsif c_data_rec.item1 is not null and
c_data_rec.item2 is not null and
c_data_rec.item3 is not null and
c_data_rec.item4 is not null then
l_line_tbl(1) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(1).inventory_item_id :=v_itemid1;
l_line_tbl(1).ordered_quantity := c_data_rec.quantity1;
l_line_tbl(1).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(1).UNIT_SELLING_PRICE := c_data_rec.price1;
l_line_tbl(1).UNIT_LIST_PRICE := c_data_rec.price1;
l_line_tbl(1).attribute13:= v_item_type1;
l_line_tbl(1).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- SECOND LINE RECORD
--elsif c_data_rec.item2 is not null then
l_line_tbl(2) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(2).inventory_item_id := v_itemid2;
l_line_tbl(2).ordered_quantity := c_data_rec.quantity2;
l_line_tbl(2).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(2).UNIT_SELLING_PRICE := c_data_rec.price2;
l_line_tbl(2).UNIT_LIST_PRICE := c_data_rec.price2;
l_line_tbl(2).attribute13:=v_item_type2;
l_line_tbl(2).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- THIRD LINE RECORD
--elsif c_data_rec.item3 is not null then
l_line_tbl(3) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(3).inventory_item_id := v_itemid3;
l_line_tbl(3).ordered_quantity := c_data_rec.quantity3;
l_line_tbl(3).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(3).UNIT_SELLING_PRICE := c_data_rec.price3;
l_line_tbl(3).UNIT_LIST_PRICE := c_data_rec.price3;
l_line_tbl(3).attribute13:=v_item_type3;
l_line_tbl(3).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- FOURTH LINE RECORD
--elsif c_data_rec.item4 is not null then
l_line_tbl(4) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(4).inventory_item_id := v_itemid4;
l_line_tbl(4).ordered_quantity := c_data_rec.quantity4;
l_line_tbl(4).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(4).UNIT_SELLING_PRICE := c_data_rec.price4;
l_line_tbl(4).UNIT_LIST_PRICE := c_data_rec.price4;
l_line_tbl(4).attribute13:=v_item_type4;
l_line_tbl(4).operation := OE_GLOBALS.G_OPR_CREATE;
elsif c_data_rec.item1 is not null and
c_data_rec.item2 is not null and
c_data_rec.item3 is not null then
l_line_tbl(1) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(1).inventory_item_id :=v_itemid1;
l_line_tbl(1).ordered_quantity := c_data_rec.quantity1;
l_line_tbl(1).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(1).UNIT_SELLING_PRICE := c_data_rec.price1;
l_line_tbl(1).UNIT_LIST_PRICE := c_data_rec.price1;
l_line_tbl(1).attribute13:= v_item_type1;
l_line_tbl(1).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- SECOND LINE RECORD
--elsif c_data_rec.item2 is not null then
l_line_tbl(2) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(2).inventory_item_id := v_itemid2;
l_line_tbl(2).ordered_quantity := c_data_rec.quantity2;
l_line_tbl(2).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(2).UNIT_SELLING_PRICE := c_data_rec.price2;
l_line_tbl(2).UNIT_LIST_PRICE := c_data_rec.price2;
l_line_tbl(2).attribute13:=v_item_type2;
l_line_tbl(2).operation := OE_GLOBALS.G_OPR_CREATE;
--end if;
-- THIRD LINE RECORD
--elsif c_data_rec.item3 is not null then
l_line_tbl(3) := OE_ORDER_PUB.G_MISS_LINE_REC;
l_line_tbl(3).inventory_item_id := v_itemid3;
l_line_tbl(3).ordered_quantity := c_data_rec.quantity3;
l_line_tbl(3).CALCULATE_PRICE_FLAG :='N';
l_line_tbl(3).UNIT_SELLING_PRICE := c_data_rec.price3;
l_line_tbl(3).UNIT_LIST_PRICE := c_data_rec.price3;
l_line_tbl(3).attribute13:=v_item_type3;
l_line_tbl(3).operation := OE_GLOBALS.G_OPR_CREATE;
end if;
-- CALL TO PROCESS ORDER
OE_Order_PUB.Process_Order(
p_api_version_number=>1.0,
p_header_rec => l_header_rec,
p_line_tbl=> l_line_tbl,
p_line_adj_tbl=> l_line_adj_tbl,
-- OUT variables,
x_header_rec =>l_header_rec
, x_header_val_rec =>l_header_val_rec
, x_Header_Adj_tbl =>l_Header_Adj_tbl
, x_Header_Adj_val_tbl =>l_Header_Adj_val_tbl
, x_Header_price_Att_tbl =>l_Header_price_Att_tbl
, x_Header_Adj_Att_tbl =>l_Header_Adj_Att_tbl
, x_Header_Adj_Assoc_tbl =>l_Header_Adj_Assoc_tbl
, x_Header_Scredit_tbl =>l_Header_Scredit_tbl
, x_Header_Scredit_val_tbl=>l_Header_Scredit_val_tbl
, x_line_tbl =>l_line_tbl
, x_line_val_tbl =>l_line_val_tbl
, x_Line_Adj_tbl =>l_Line_Adj_tbl
, x_Line_Adj_val_tbl =>l_Line_Adj_val_tbl
, x_Line_price_Att_tbl =>l_Line_price_Att_tbl
, x_Line_Adj_Att_tbl =>l_Line_Adj_Att_tbl
, x_Line_Adj_Assoc_tbl =>l_Line_Adj_Assoc_tbl
, x_Line_Scredit_tbl =>l_Line_Scredit_tbl
, x_Line_Scredit_val_tbl =>l_Line_Scredit_val_tbl
, x_Lot_Serial_tbl =>l_Lot_Serial_tbl
, x_Lot_Serial_val_tbl =>l_Lot_Serial_val_tbl
, x_action_request_tbl =>l_action_request_tbl,
x_return_status=> l_return_status,
x_msg_count=> l_msg_count,
x_msg_data=> l_msg_data);
if l_msg_count > 0 then
for l_index in 1..l_msg_count loop
l_msg_data := oe_msg_pub.get(p_msg_index => l_index, p_encoded => 'F');
update XXSC_SALES_ORDER_IMPORT
set process_flag='E',remarks=l_msg_data
where iwb_no=c_data_rec.iwb_no;
commit;
dbms_output.put_line('Order Failed.'||l_msg_data);
end loop;
end if;
-- Check the return status
if l_return_status = FND_API.G_RET_STS_SUCCESS then
update XXSC_SALES_ORDER_IMPORT
set process_flag='Y',ORDER_NUMBER=l_header_rec.order_number,remarks='SUCCESS'
where iwb_no=c_data_rec.iwb_no;
commit;
fnd_file.put_line (fnd_file.output,'Order no:'||l_header_rec.order_number||' Created for the IWB no:'||c_data_rec.iwb_no);
dbms_output.put_line('Order..'||l_header_rec.order_number);
Else
dbms_output.put_line('Order Failed.');
end if;
commit;
END LOOP;
End;
/Your code always sends 4 line records with each header. Code is not checking if it belongs to same header or not. Please check your code.
-
Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
ThanksHi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
<serviceDebug
includeExceptionDetailInFaults="true"
/>
<serviceMetadata
httpGetEnabled="true"
httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx -
The parameter name [...] in the query's selection criteria does not match..
Hi all,
I'm trying to pratice EJB 3 (which I learnt at school), with JSF and JPA, but i'm really stuck with that error :
Exception [TOPLINK-6094] (Oracle TopLink Essentials - 2.0 (Build b41-beta2 (03/30/2007))): oracle.toplink.essentials.exceptions.QueryException
Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadAllQuery(oracle.datamodel.Employees)
I will try to explain clearly what i'm trying to do :
In fact, i'm following that tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
But, as i didn't have any oracle database, but had a mysql one on my machine, i decided to use that DB instead of the the oracle DB... So i created a set of example data (to replace the oracle example set) ...so i created the tables EMPLOYEE, and DEPARTMENT... with the correct relations (FK) and PK)
All was ok, i choose my "mysql-connector" (jdbc) instead of the oracle jdbc connector... so i could follow the tutorial.
My problem appears at the step 12 (of "Creating a Master-Detail JavaServer Faces Page"), when i run the file deptEmployees.jspx.
The information of the first departement displays correctly :
departmentID 1
departmentName ... etc
but it can't display the employees belonging to that department !
the error is :
JBO-29000: Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query. Query: ReadAllQuery(oracle.datamodel.Employees)
I think i understand what is the problem... I think that the query in charge of gathering the data of a specific departement need a parameter, but couldn't find it. But i don't know why :-/ I have tried many things and read the topics talking about that error... but it didn't solved the problem. I don't know anymore where to investigate.
I have created a Zip file of my work (it's an EJB/JSF Application.. with jdev 10.1.3.3.0)
(available here : http://dl.free.fr/mQ5esdQuS/EJB_appli.zip)
I would be glad if someone could take few minutes to help me.
Thank you in advance,
Thomas B (student)Hello,
This is a common mistake. Java string comparisons in TopLink are case sensitive by default, and since column names are uppercase when defaulted, TopLink cannot find the "departmentID" column name. In this case, Departments ID column defaults to "DEPARTMENTID" as required by the JPA specification.
Either change Departments id annotation to @Id
@Column(name="departmentID", nullable = false)
private Integer departmentID;or change Employees' ManytoOne annotation to:
@ManyToOne
@JoinColumn(name = "departmentID", referencedColumnName = "DEPARTMENTID")
private Departments departments;Best Regards,
Chris -
Due to our company changing names, we recently moved to a new domain. All users were at first getting a certificate error when opening Outlook "the name on the security certificate is invalid or does not match the name of the site." After our network
admin made some changes, nobody receives this error anymore except one user. The URL at the top of the security alert is the old domain, mail.olddomain.com. I checked the users Exchange Proxy Settings in Outlook, everything is showing the URL's of the new
domain so I'm not sure where this is coming from. I'm assuming it has to be something on her local machine since she is the only one who still gets the error.
Thanks in advance for any help.
Exchange server 2008
Outlook 2010Hi,
Please follow all above suggestions to confirm whether the issue happens in OWA. And run Test E-mail AutoConfiguration in Outlook to check whether there is any URL settings using the old domain.
If the issue doesn’t happen in OWA and your URL configurations are all same as others and set correctly, please create a new Outlook profile to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
Error: Sequence does not match type xs:string
I am using BDB XML 2.5.16 to store and query my XML documents in Java. The documents are IMDB xml documents containing actors information
obtained from INEX website https://inex.mmci.uni-saarland.de/login.jsp. One of the document I stored in the database is the following
<?xml version="1.0" encoding="UTF-8"?>
<persons>
<person>
<name>jason angeles
</name>
<filmography>
<act>
<movie>
<title>prison planet 3 the revenge 1998
</title>
<year>1998
</year>
<character>evil ninja
</character>
</movie>
</act>
</filmography>
</person>
</persons>
I want to search using XQuery for filmography element whose title element contains ANY of the following keywords ('planet', 'revenge', '1998'). Below is the query I used
// declaring function functx:contains-any-of
String qryRk = "declare namespace functx = 'http://www.functx.com'; "
+ "declare function functx:contains-any-of "
+ "( $arg as xs:string?" + " , " + " $searchStrings as xs:string* ) as xs:boolean { "
+ "some $searchString in $searchStrings "
+ " satisfies contains($arg,$searchString)} ; ";
String myQuery101 = qryRk + "for $entity in collection('simpleExampleData2.dbxml')//filmography "
+ "where functx:contains-any-of ( $entity/act/movie/title , ('planet', 'revenge', '1998'))"
+ "return $entity";
When I execute the query i expect to get at least get the following element as mu output
Document : person_31000.xml:
<filmography>
<act>
<movie>
<title>prison planet 3 the revenge 1998
</title>
<year>1998
</year>
<character>evil ninja
</character>
</movie>
</act>
</filmography>
However instead of the above element i got the following Error
Exception in thread "main" com.sleepycat.dbxml.XmlException: Error: Sequence does not match type xs:string? - the sequence contains more than one item [err:XPTY0004], <query>:1:343, errcode =
QUERY_EVALUATION_ERROR
at com.sleepycat.dbxml.dbxml_javaJNI.XmlManager_query__SWIG_0(Native Method)
at com.sleepycat.dbxml.XmlManager.query(XmlManager.java:544)
at com.sleepycat.dbxml.XmlManager.query(XmlManager.java:320)
at xmlirsystemstruxplus.XQueryEngine.queryEngine(XQueryEngine.java:269)
at xmlirsystemstruxplus.XMLIRSystemStruXplus.main(XMLIRSystemStruXplus.java:109)
Java Result: 1
Note that i used contains-any-of() function because the contains () function does not work with 'planet revenge 1998' string may be because the keywords do not appear in the order they appear in the element content.
Please can any body help me to find out (1) why i have the above error ? and solution (2) why the condition contains ( $entity/act/movie/title , 'planet revenge 1998') is not working ? how do i use contains() function w.r.t this
Thank you in advance
Message was edited by: RokoA 19/01/2015 by RokoAUsing the shell dbxml in both 2.5 and 6.0 I created a container and put the document example you gave into it. Then I executed the following query:
[code]
declare namespace functx = 'http://www.functx.com';
declare function functx:contains-any-of ( $arg as xs:string?, $searchStrings as xs:string* ) as xs:boolean {
some $searchString in $searchStrings
satisfies contains($arg,$searchString)
for $entity in collection('simpleExampleData2.dbxml')//filmography
where functx:contains-any-of ( $entity/act/movie/title , ('planet', 'revenge', '1998'))
return $entity
[/code]
And got the results you expected instead of an error.
Since you are using the Java API it is possible the problem is in how you configured and executed the query, instead of in the query itself. If you could post an example program or code section that produces the error, then I can continue you help you with this.
Lauren Foutz
Maybe you are looking for
-
My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?
-
How do I mirror iPad to apple tv
-
Created JSP program that calls a javabean but for some reason it cannot find the javabean class. here is the JSP that tries to do the import (This jsp sits in C:\jakarta-tomcat-4.0.3\webapps\webdav\myJSPs): <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
-
How to see financial reporting ports?
Hi guys, I have a non-patched 11.1.2.1 installation in a distributed environment. On this version, what is the best way to see the ports that have been configured for financial reporting? The documentation I have seems incorrect in places so I would
-
ASG_START_EVENT_IND should update all to 0 if TERM
I am facing this scenario ASSIGNMENT_ID ASG_START_EVENT_IND W_EVENT_SUBG_CODE EVENT_CODE 4897 1 ASG~START ASG~START 4897 0 TERM~INVOLUNTARY TERM~INVOLUNTARY~I-RESIGN~ON~AGREEMENT ASG_START_EVENT_IND should update all to 0 if TERM, but oracle doesn't