Created separate sites by using different log in names

Hi,
I created 3 websites on the same mac with iweb '08, using different log in account names each time so that iweb would treat the sites separately. I don't know if it was the smartest thing to do, but it seems to have worked. (None are on .mac, but one of them will be in the near future.)
They are all saved on my desktop. Is this a workable solution? I haven't seen anyone post it as a possibility. If not, what can I do to make sure that I don't lose the work I put into these sites?
Thanks!

They are all saved on my desktop.
The data for your sites in kept in their Domain files:
http://homepage.mac.com/thgewecke/iwebdata.html
Is that what you have "saved"?
You can keep these separate by simply moving them out of their default location after completing each site. But working in separate user accounts is also fine, and is a commonly recommended way of keeping sites separate when the user has more than one account at .Mac.

Similar Messages

Creating new site collection using wsp template fails

Hi all,
I'm creating new site collections using a wsp solution generated by "save as template".
For site collection creation I select "<Select template later>" then I upload the wsp solution.
Everything worked until last month, now after CU installation (agoust 2014) I get an error:
"List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user."
Does anyone know how to solve it?
Thanks
Maurizio

ULS contains a lot of those errors:
System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>,
StackTrace:
in Microsoft.SharePoint.SPWeb.GetList(String strUrl)
in Microsoft.SharePoint.SPWeb.TryGetListByUrl(String url)
in Microsoft.SharePoint.SPFieldElement.PerformFixUpIfLookUpField(Guid fieldId, XmlNode xmlNodeOfAField, SPWeb web)
in Microsoft.SharePoint.SPFieldElement.ElementActivated(SPFeaturePropertyCollection props, SPSqlCommand sqlcmdAppendOnly, SPWebApplication webApp, SPSite site, SPWeb webNull, Boolean fForce)
in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionFieldsAndContentTypes(SPFeaturePropertyCollection props, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
in Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
in Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
in Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
fMarkOnly, Boolean fIgnoreMissing, SPFeatureDefinitionScope featdefScope)
in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedCore(SPSite site, SPWeb web, String sFeatures, Boolean fMarkOnly, Boolean fIgnoreMissing)
in Microsoft.SharePoint.SPFeatureManager.<>c__DisplayClass7.<EnsureFeaturesActivatedAtWeb>b__6()
in Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param)
in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedAtWeb(Byte[]& userToken, Guid& tranLockerId, Int32 nZone, Guid databaseid, Guid siteid, Guid webid, String sFeatures, Boolean fIgnoreMissing)
in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
bstrWebTemplate, Int32& plWebTemplateId)
in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
bstrWebTemplate, Int32& plWebTemplateId)
in Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId)
in Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1&
featureDependencyErrors)
in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(String strWebTemplate)

I cannot access firefox. but i can access it if i use another log on name from the same computer. how do i get to my bookmarks from my log on name.

i can access firefox from a different log on name but not my own. i want to retrieve my bookmarks.

See if you can boot into the Safe Mode.
Safe Mode - About
Safe Mode

TS3899 I accidently turned ON contacts when I was turning ON my yahoo email account in settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone

I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone with an email address!!! how do I UNDO? it says all CONTACTS WILL BE DELETED...when I go to turn CONTACTS to OFF.

Any contacts synced with the Yahoo account will be deleted from the phone if you turn it off. They will still be out there in Yahoo land, so if you turn it off and it deletes something you didn't want to, just turn it back on again.
It's extremely unclear what you did when you say " I only created contacts and typed in emails that I had for those contacts.....so I am still not sure how to UNdo what I did without deleting anything"
Undo WHAT, exactly? You said "I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name."
Just turn it off.

DR within Same Site Using Different Virtual Directory Names

We are deploying Exchange 2013 and have setup a set of 2013 servers in a different building we would like to use for DR.
We have 2 servers in our main datacenter behind a load balancer and 2 servers in a 2nd datacenter within the same DAG. So mailbox databases are already on the servers. However for the CAS role, we are looking at just setting the DR servers to
have different virtual directory names so in a DR situation, we just need to tell people to access owadr.domain.com instead of owa.domain.com. The DR servers would be behind a 2nd load balancer only configured to talk to those two servers.
Both of these datacenters are in the same AD site, and the network vLANS are stretched across each datacenter so DAG replication is already working. The primary serves are already working behind the production load balancer. Just need to make
sure we are going in the right direction for the DR setup. Our public certificate already names the names of owa.domain.com, owadr.domain.com, and autodiscover.domain.com on the cert. We are not really concerned so much with Outlook/ActiveSync
traffic in a DR situation, but would just like OWA to be a temporary solution while the main datacenter recovers. So a different virtual directory name should work right?

Hi,
From your description, I know four servers are in the same site but with different building. So you create two load balancer. And it seems you add the DAG members into Load Balancer. Could you confirm if you use WNLB?
In fact, WNLB can't be used on Exchange servers where mailbox DAGs are also being used because WNLB is incompatible with Windows failover clustering. If you're using an Exchange 2013 DAG and you want to use WNLB, you need to have the Client Access server
role and the Mailbox server role running on separate servers. See more details in the following link:
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx.For
For your environment, I have a suggestion: we can deploy two servers with only CAS role installed. One cas in one datacenter. Put them in one Load Balancer. Point OWA URL to this load balancer. So when one datacenter is down, the request will
go to anoter CAS in another datacenter. And the OWA URL is not changed..
But if you want to use two OWA URLs for each datacenter. owa.domain.com and owadr.domain.com. You can set OWA internal URL and external url on CAS servers in DR site to use owadr.domain.com. And ask users to login
https://owadr.domain.com/owa instead of
https://owa.domain.com/owa when the primary datacenter is down.
Sent By
Silver

Different log file name in the Control file of SQL Loader

Dear all,
I get every day 3 log files with ftp from a Solaris Server to a Windows 2000 Server machine. In this Windows machine, we have an Oracle Database 9.2. These log files are in the following format: in<date>.log i.e. in20070429.log.
I would like to load this log file's data to an Oracle table every day and I would like to use SQL Loader for this job.
The problem is that the log file name is different every day.
How can I give this variable log file name in the Control file, which is used for the SQL Loader?
file.ctl
LOAD DATA
INFILE 'D:\gbal\in<date>.log'
APPEND INTO TABLE CHAT_SL
FIELDS TERMINATED BY WHITESPACE
TRAILING NULLCOLS
(SL1 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL2 char,
SL3 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL4 char,
SL5 char,
SL6 char,
SL7 char,
SL8 char,
SL9 char,
SL10 char,
SL11 char,
SL12 char,
SL13 char,
SL14 char,
SL15 char)
Do you have any better idea about this issue?
I thought of renaming the log file to an instant name, such as in.log, but how can I distinguish the desired log file, from the other two?
Thank you very much in advance.
Giorgos Baliotis

I don't have a direct solution for your problem.
However if you invoke the SQL loader from an Oracle stored procedure, it is possible to dynamically set control\log file.
# Grant previleges to the user to execute command prompt statements
BEGIN
dbms_java.grant_permission('bc4186ol','java.io.FilePermission','C:\windows\system32\cmd.exe','execute');
END;
* Procedure to execute Operating system commands using PL\SQL(Oracle script making use of Java packages
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "Host" AS
import java.io.*;
public class Host {
public static void executeCommand(String command) {
try {
String[] finalCommand;
finalCommand = new String[4];
finalCommand[0] = "C:\\windows\\system32\\cmd.exe";
finalCommand[1] = "/y";
finalCommand[2] = "/c";
finalCommand[3] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_in = new BufferedReader(new InputStreamReader(pr.getInputStream()));
String buff = null;
while ((buff = br_in.readLine()) != null) {
System.out.println("Process out :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process output.");
ioe.printStackTrace();
}).start();
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_err = new BufferedReader(new InputStreamReader(pr.getErrorStream()));
String buff = null;
while ((buff = br_err.readLine()) != null) {
System.out.println("Process err :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process error.");
ioe.printStackTrace();
}).start();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
public static boolean isWindows() {
if (System.getProperty("os.name").toLowerCase().indexOf("windows") != -1)
return true;
else
return false;
* Oracle wrapper to call the above procedure
CREATE OR REPLACE PROCEDURE Host_Command (p_command IN VARCHAR2)
AS LANGUAGE JAVA
NAME 'Host.executeCommand (java.lang.String)';
* Now invoke the procedure with an operating system command(Execyte SQL-loader)
* The execution of script would ensure the Prod mapping data file is loaded to PROD_5005_710_MAP table
* Change the control\log\discard\bad files as apropriate
BEGIN
Host_Command (p_command => 'sqlldr system/tiburon@orcl control=C:\anupama\emp_join'||1||'.ctl log=C:\anupama\ond_lists.log');
END;Does that help you?
Regards,
Bhagat

Creating new flat file using TextEdit w/specified name and path

Hi all,
I am working on an Applescript to create a blank new plain text file (in /tmp with a unique filename derived from today's date and time) and am missing something 'cause I keep getting an error message.
Here's the code:
<pre class=command>
set Today to (do shell script "/bin/date +%Y%m%d%H%M%S") as string
set DefaultFilename to (Today & "TMP.txt") as text
set TMPpath to "/tmp/" as text
set TMPFile to (TMPpath & DefaultFilename)
tell application "TextEdit"
set NewDoc to make new document with properties {name:DefaultFilename, path:TMPpath}
end tell
</pre>
When I run the above code snippet I get the Applescript error message:
TextEdit got an error: NSArgumentsWrongScriptError
I understand that the properties listed in the make command should be a record, and that the individual properties comprising the record should each be text.
What am I missing here? Something obvious I suspect.
Any ideas would be greatly appreciated!
Ed

You're trying to use Unix-style paths for a Cocoa app, and that won't work.
You need to use Mac-style paths, that is, colon-delimited, not unix-style (slash-delimited) paths.
<pre class=command> set Today to (do shell script "/bin/date +%Y%m%d%H%M%S") as string
set DefaultFilename to (Today & "TMP.txt") as text
set TMPpath to ":private:tmp:" as text
set TMPFile to (TMPpath & DefaultFilename)
tell application "TextEdit"
set NewDoc to make new document with properties {name:DefaultFilename, path:TMPpath}
end tell</pre>
A slightly better solution is to use the path to command rather than a hard-coded path. path to temporary items will give you the path to the current OS temporary file directory, which is more reliable than hard-coded strings, especially since non-English versions of the OS mght not use the same path names.
<pre class=command> set TMPpath to path to temporary items as text</pre>

How can I create a site map using muse?

I've been trying to optimize my page views-- finding SEO challenges using Adobe Muse. Is there any easy way to include a SITE MAP?
THanks!
nancy p.

Hi there,
BC creates the sitemap.xml automatically. Go to your URL and go /sitemap.xml should be there.
Muse is not the best thing to use and build if SEO is important to you, the code output alone is not SEO friendly.

How to create separate Transfer Orders for different items in a single D/O?

Hello gurus,
In my D/O there may are Item A and Item B. I would like to have separate transfer orders created.
1 T/O for Item A and another T/O for Item B. Currently, I get the message "L3131 No partial picking allowed for delivery documents". System does not allow.
I have checked D/O Doc Type LF and Item Cat TAN. I don't see any field which allows partial picking (unless I missed it?).
How / Where can I configure to allow such feature?

Hello,
I had exactly same problem, and I found no answer on the web.
A friend, Anderson Ranéa, Senior WM Consultant, helped me...
So... you need to set the flag PartialPick at: SPRO/LE/WM/Shipping/Interfaces/Shipping/Define Shipping Control/Shipping Control per Warehouse Number.
Regards.

Is it possible to extract a PDF file into separate ones but using a specific file name that comes from the PDF page?

Hello,
I am unsure if this is possible but its worth asking.
I have a PDF document that contains 56 pages.
Each page has an 'Agreement Number' at the top left.
I have managed to successfully extract the pages into separate documents (56 documents) but they are all named the same but page 1, page 2, page 3 etc..
What i am trying to do is use these 'agreement numbers' in the extraction process so when they save i have 56 different files but they show the agreement number in the file name.
i have looked into changing the actual page numbers on the page thumbnails to see if you can do it that was to no avail.
any help would be much appreciated, or tell me i cant do it, at least i know ill be defeated.
PS i have around 6 or 7 PDF files with 50+ pages so its a long boring task if i need to go and rename all these.
Cheers
Jez

It would be possible in theory to do it with a folder-level script, provided the string you need is in exactly the same structural position on each page. You would use the doc.getPageNthWord() function to collect the string you want, then the doc.extractPages() function to save each page to a file.
See the Acrobat SDK documentation for help with scripting. http://bit.ly/AXISDKH

Create directory from procedure using IN parameter-Directory name with path

Hi,
I wrote a procedure which takes directory name(C:\temp) as IN parameter and create oracle directory using EXECUTE IMMEDIATE by the procedure. Proc compiled fine but when i try to execute it (exec prc_lx_e_m_fund_activty ('C:\interface','test1.txt','20040102') , i am getting the following error with the execute immediate statement mentioned below.
create or replace
PROCEDURE prc_lx_e_m_fund_activty
i_output_dir IN VARCHAR2,
i_output_file_name IN VARCHAR2,
i_interface_date IN VARCHAR2
AS
EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY OUTPUT_PATH AS ' || ''''||i_output_dir||'''' ||';'; -- Where i_output_dir=C:\temp (I am passing this parameter as IN)
END
ORA-01481: invalid number format model
ORA-06512: at "DBO.PRC_LX_E_M_FUND_ACTIVTY", line 326
ORA-00911: invalid character
ORA-06512: at line 10
Process exited.
Regards,
Nagarjun.

You don't need to put it in a string first. Your actual problem was that you included a ";" on the end of your statement which you don't require with execute immediate.
This would do the job...
EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY OUTPUT_PATH AS '''||i_output_dir||'''';or this (if you are on 10g upwards)
EXECUTE IMMEDIATE q'[CREATE OR REPLACE DIRECTORY OUTPUT_PATH AS ''||i_output_dir||'']';However, I would seriously question why you are creating directories dynamically in code.
The purpose of creating directories and granting permission to read and/or write to them is to maintain security over which users can access various places on the file system. If you give this flexibility of creating directories to users then effectively they can kill your database server and/or hack into information that they shouldn't.

Create different log file with different schema by spool

Hello,
I want to know a way to create a different log file depend on different schema
I have two schema on same db server
1) schema kennam/*****/kennam
2) schema koonhey/*****/koonhey
by a way, I want to create a different log file name e.g. kennam.log / koonhey.log on such two schema...
I always run @showbalance; to run showbalance.sql to create that report..
I hope you understand what I talking about (english is not my native language........), anyone could help?
showbalancelog.sql
spool c:\log.log+
spool c:\log.log
select to_char(sysdate,'dd-mm-yyyy hh:mi:ss') from dual;
column com_name format a20;
select cus.tid, cus.com_name com_name, cus.com_balance,
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) sum_invoice,
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) sum_income,
cus.com_balance -
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) +
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) total_balance
from customers cus
order by cus.tid;
spool off

okey I solved on this way, is anyone know another simpler way?
be simpler part
variable vspoolfile varchar2(20)
declare
username varchar2(20);
spoolfile varchar2(50);
begin
select 'c:\' || user || '.log' into spoolfile from dual;
-- spoolfile := 'c:\' || username || '.log';
:vspoolfile := spoolfile;
-- dbms_output.PUT_LINE(spoolfile);
end;
-- print :vspoolfile;
column spoolfilecol new_value definespoolfile noprint
select :vspoolfile spoolfilecol from dual;full content of my showbalancelog.sql file
variable vspoolfile varchar2(20)
declare
username varchar2(20);
spoolfile varchar2(50);
begin
select 'c:\' || user || '.log' into spoolfile from dual;
-- spoolfile := 'c:\' || username || '.log';
:vspoolfile := spoolfile;
-- dbms_output.PUT_LINE(spoolfile);
end;
-- print :vspoolfile;
column spoolfilecol new_value definespoolfile noprint
select :vspoolfile spoolfilecol from dual;
spool &definespoolfile;
column com_name format a20;
select cus.tid, cus.com_name com_name, cus.com_balance,
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) sum_invoice,
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) sum_income,
cus.com_balance -
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) +
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) total_balance
from customers cus
order by cus.tid;
spool off;

When logging onto a web site with a log on name firefox is changing logon name from Kostas to kostas as the site is case sensitive it is not acceptable. how do I correct this? Thanks

I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
How can I correct this please
Probably no connection but
I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
Finally I had a phone call from a company called NERD-I.com
offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
Many thanks

Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert

Can I still create new sites in iweb and publish them to mobile me?

Can I still create new sites in iweb and publish them to mobile me? Also Can the sites not contain movies or photos, or just not a full gallery?

You can have as many sites and domain names on a single MMe account. However, only one site can use the CNAME domain name forwarding while the others must use URL forwarding.
Multiple Sites with Domain Name(s) in a Single MobileMe Account
Here's how to have multiple sites in a single MMe account with one or more sites having a domain name.
A. All sites are in the same Domain.sites2 files
1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
Click to view full size
2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMeUsername/SiteName, or, if there is no domain name, just MobileMe's full URL.
B. Each site is in its own Domain.sites2 file.
Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents.
Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
In iWeb domainfile 1:
Create a dummy site : _dummy
with a blank page.
Create your working site : Whatever
Add pages
Publish both Sites to the same same location on the same server.
Your _dummy site is now the default Site.
Check.
In iWeb domainfile 2:
Create/Use your CurrentSite.
Move a page to the top of the Site and back. Publish the Site.
iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
Check.
From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
Simply do not touch your _dummy ever again. And never forget that.
3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
The entire site must be republsihing in order to get that new site.
Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
NOTE: the CNAME method provides a shorter URL: http://www.DomainName.com/Site_Name/PageName. CNAME does not have masking.
The URL forwarding displays the full MMe URL:
http://web.me.com/MMeUsername/Domain_Name/PageName.
With domain name masking that will be shortened to:
http://www.Domain_Name.com for every page of your site.
However, visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.

Issue in Regional Settings in creating Multilingual sites

Hi,
I am using SharePoint 2013 Standard edition(June CU update) and facing an issue with multi-lingual sites.
I have custom web templates with which sites are created. The current template which I am using in inheriting from Team site template.
However, when I create a site with a different locale I am encountering java-script errors which is manifesting as different errors. A few errors I can list are
Not able to delete a web-part on the home page
The task list is not editable
The js error is specifically coming in sp.ui.timeline.js (_spRegionalSettings undefined). I have attached the snapshot below
On changing the locale in regional settings everything works fine.
To confirm this issue is not with my custom web template I have tried the same thing on OOB Team site template. I created a Swedish language site and also changed my browser language to Swedish. Still the same error persists.
I have attached my regional settings for reference.
Is this a bug in SharePoint or does anybody have a workaround for this?

The issue is different. In Some of the European languages, dot(.) is represented as comma(,). If you see the HTML source, you will see the JS breaks while initializing '_spRegionalSettings' variable.
var _spRegionalSettings={adjustHijriDays:0,calendarType:1,firstDayOfWeek:0,firstWeekOfYear:0,localeId:1031,currentDateInLocalCalendar: new Date(2014, 0, 3),showWeeks:0,timeZone:'05:29:59.9999851',timeZoneInHours:5,5,workDayEnd:1020,
The regional setting values are like- key:value,key:value, ...
But... since all European countries has non-decimal time zone, we are safe. Still I am not sure if this issue can occur for some other country where decimal time zone meets dot-comma situation.

Created separate sites by using different log in names

Similar Messages

Maybe you are looking for