Created two item by personalisation not showing in exact line

Hi,
I have created two date type fields through personalization i.e start date and end date under pagelayout region but these two items doesnt show in accurate line in my oaf page.
These two fields are showing vertically but not in same line there are some space between these two fields.
How can I show these two fields in same line by personalization because this is standard page.
I tried spacer too but it doesn't work.
how can I achieve this.
Pls help
Thans Amit

Hi
If you have created sales order for 21 line items and in delivery there are only 11 line items are copied then while in the delivery creation from the initial screen there could have been FROM and TO  mentioned
If your answer is no for this then in the delivery overview screen there will be a message check the nodes in the log
Have you checked that?
The system will itself tell why?
From the top menu bar-edit--error log
Regards
Raja

Similar Messages

  • Cummulated kpi which is created in BEX dssigner is not showing in WEBI Side

    I am facing below issue
    i have create one  kpi working capital commutative in Bex designer  which is cumulation  .its working fine
    means result is coming cummulated in bi side. but in WEBI side above kpi is NOT Showing . Already I Have  allow external access to this query
    Please advise me the above issue
    Thanks
    Nishant

    Hi suman,
    PFA attached screen shot and detail about above problem
    In BEX designer side we create two KPI one is not cumulated and other one is Cumulated .but on WEBI  side ONLY ONE KPI Which is non cumulated in nature is showing and other one which is cumulated nature is not showing
    For Ref purpose i have attached screen shoot
    1) First pic show KPI Is  cumulated in nature
    2) Second Pic KPI Is Non cumulated in nature
    3) third pic show on Webi side on that side only comulative  KPI is shown

  • Created by column value is not showing in XSLT List View After Migration To 2013

    Hello All,
    In my XSLT Created By Column value is not showing. Please help me with this problem. My code is simple I have custom column in XSLT name as 'Reported By' in which I want to show 'Created By' column value. but it is not showing. please help me with that.
    Thanks in advance

    hi
    is anyone has answer for this question.
    thanks...!!!!

  • Notes created on iPhone or iPad not showing up in outlook

    I sync both my iPhone 5s and iPad Mini with Outlook 2007 on my computer.  The notes created on either the iPhone or iPad do not show up in Outlook, but the ones created on Outlook show up in both the iPhone and iPad.  The notes created on the iPhone do not show up on the iPad, and vice-versa.  I do not synce mail or notes with iCloud.

    More info on my problem:
    I tried to connect my camera directly via USB and it too will not show up in iPhoto. 
    Curiously, I can pull the SD card from the camera and stick it into the SD slot on my Mac Mini and it will then show up as a device in iPhoto.  So I can import everything from my camera's SD card.
    I tried importing into iPhoto from iPad, iPhoto, and camera onto my wife's iMac and everything works.
    So it's definitely something on my computer that is screwing up.
    Hope someone can help.....

  • I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

    I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
    iMac and Mac Pro
    Thanks

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • The purchased items it is not showing all applications

    I HAVE IPHONE  4S 16GB
    WHEN I GO TO APP STORE FROM THE IPHONE TO THE PURCHASED ITEMS IT IS NOT SHOWING ALL APPLICATION WHICH ONE I DOWNLOADING
    PLEASE I WANT A SOLUTION.

    Hi, rsvip7.
    I would recommend closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps by attempting to access your previous purchases.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    If the issue persists, I would verify which Apple ID was used to make the purchases you are unable to locate.  If the application is located on your computer, you can either Right-Click and Get Info on the selected media for Windows or Control-Click and Get Info for Mac.  The Apple ID that was used to purchase the media will be on the Summary tab. You can also verify what Apple ID it was purchased with by accessing your purchase history by following the steps below. 
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/HT2727
    If the account used to purchase the missing content is different, you will need to login with that Apple ID in order to access prior purchases. 
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Hope that helps,
    Jason H. 

  • Why does Group created on Master console does not show any device count mapped on the managed Amp?

    Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
    A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
    Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console. 

    Laura Quitugua wrote:
    Hi,
    I have syced my outlook email with my iphone 4s and ipad.
    Note that only the email account info (username, login, server)  is sync'd.
    The actual emails are not sync'd.
    Opening an email on one device does nothing on teh other devices.

  • Safari does not show url address line. google is taking up all the space...

    safari does not show url address line anynore. google is taking up most of the space on the safari page

    Hover the cursor over that line until it becomes a big plus sign with arrows on the left and right. Click and drag the cursor so that the rest of the address line is the way you want it.
    (66963)

  • CLI does not show on secondary line in cisco 9971 through MGCP CO line

    Hi,
    There's an issue that CLI does not show on secondary line in cisco 9971 through MGCP CO line. Only the calls that are getting to the first line shows CLI.
    It shows as "unknown number" when it's getting a call to the secondary line ( MGCP CO line).
    Has anyone faced this issue?
    Please help to resolve.
    Thanks & Regards,
    Achintha

    Don't use TimeLines.  Log-in to the Adobe Exchange with your
    Widget Browser  ~ http://labs.adobe.com/technologies/widgetbrowser/
    jQuery & Ajax Slideshows from Adobe Exchange:
        * jQuery Cycle Widget
        * Lightbox Gallery Widget
        * Spry Content Slideshow
        * Spry Image Slideshow
    As to your layout problems, we still need a link to your page. 
    Free host for testing: http://www.000webhost.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Materials in class items K are not showing in CU50 result

    Dear Experts
    I have configured a new product for my company . The details are provided as below.
    For configuration of the product I have used a class item K . The list of materials to be picked from this class are assigned to the class through T-code CL24N .
    I have also created a variant table and provided the value of the material list in the table . I have also written the object dependency ( procedure ) and assigned it to configuration profile .
    Problem :- After  selecting the entries in CU50 , I try to get the result.  But  the result does not  shows the required materials . Instead of materials the name of the class 300 appears in the BOM items . The Item category also shows up as K instead of L.
    Requesting your guidance in this regards . Thanks in advance.
    Aman Khan

    HI,
    If you want to use BOM Item for configuration. It's better to do take a look at this example.
    EX: I want to create FG named THEBOX. This box has 2 characteristics: Size and Color. Now you want to use BOM Item K to choose the correct color as you want.
    Sol:
    1. Create FG Material THEBOX as KMAT type (MM01)
    2. Create class A300_BOX (CL04) (class type 300 with 2 characteristics Size and Color) and assign to material THEBOX
    3. Create class A200_Color (class type 200) (CL04) includes characteristic Color as characteristic of A300_BOX. Then you maintain value for this characteristic in this A200_Color (Red, Blue, Green). Remember to maintain on Additional data tab with Allow in BOM and Resulting item category is L.
    4. You create 3 raw materials ColorRED, ColorBlue, ColorGreen and assign them to A200_Color class. You also need to choose the correct values for them (Red to ColorRED, Blue to ColorBLUE and Green to ColorGREEN).
    5. Create BOM for FG material THEBOX (CS01) And then go to tab Class, enter A200_Color, Item Category is K, Type is 200 and quantity also.
    6. Use CU50 for simulation
    Remember: Raw materials and FG must have the same Plant. Otherwise, it will not give you the correct BOM Item as you want.
    Hope this example helpful for you!

  • Business Area not showing during MIGO line item process

    Hi,
    We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
    If we create another MIGO document with other PO, BA is showing...
    What should be the issue...

    Hi,
    is this an account assigned PO ? Please check the PO document for the acct asst Tab .
    whather the BA is populated .?
    Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
    Regards,

  • After creating two mac users do not see when I turn on the second

    Hello , after installing Yosemite I created two administrative users , turn on the computer but I do not see you and the other , I have to get into the first and by this move to the second . how do I fix ? thank you very much

    Hi jpacchioni,
    I apologize, I'm a bit unclear on the exact issue you are describing. If you are saying that you are not seeing a login screen or the second user on startup, thereby forcing you to go into the first user and then switch to the second user, you may need to check your Login Options. You may find the following articles helpful:
    Customize the login experience
    If you are an administrator, you can specify how the login window looks to all the other users.
    Choose Apple menu > System Preferences, then click Users & Groups.
    Click the lock icon  to unlock it, then enter an administrator name and password. 
    In Users & Groups preferences, click Login Options.
    Click the “Automatic login” pop-up menu, then choose a user, or choose Off.
    If you choose a user, then whenever the Mac starts up, that user is automatically logged in. If you choose Off, then at startup the Mac opens a login window showing all the users. Automatic login takes effect the next time you restart the Mac. For better security, don’t set your Mac to automatically log in an administrator. If FileVault is turned on, automatic login is disabled. 
    Select the options you want. If you have any questions, click the Help button for detailed information.
    OS X Yosemite: Set up users on your Mac
    OS X Yosemite: Login Options pane of Users & Groups preferences
    Regards,
    - Brenden

  • MIRO- Unplanned Delivery Costs info. not showing on FS10N line items

    HI,
    Can anyone explain why when posting an Invoice with unplanned delivery costs using T-code MIRO, the purchase order info. does not show in the GL line item display T-code FS10N for any of the unplanned delivery cost line items. If anyone have a solution to allow the purchase order info. to show on the uplanned delivery costs line item that would be great.
    Thanks.
    Rickey.

    Un-planned freight is entered on the header of the invoice and therefore relates to the entire invoice. Since, its possible to have mulitple PO's on one invoice it would only be possible to assign the PO when there is exactly one PO on the invoice.
    Alternative, you can use planned freight or post the unplanned freight using the G/L tab in transaction MIRO. By using the G/L tab you can enter any information required for accounting (including multiple lines in case it is required to split the un-planned freight by several PO's.

  • F-92 Accumulated depreciation is not showing in the line item

    Hi  experts
    I am learning SAP . please let me know how to clear this
    i bought an asset . when  run depreciatiion , the amout of depreciation correctly  shown both accumulated depreciation account ( liablity) and depreciation account ( expenses)
    But when i retire the asset F-92 only 5 line items are shown . The accumulated depreciation is not showing and profit/ loss on sale  amount is showing without considering depreciation
    Please guide me how to rectify this mistake
    your help is highly appreciated
    Jaison

    Dear Sreeni
    PLEAESE HELP < I DID ALL you said , still  the pblm remaining
    Did you run AFAB to post dep?
    Yes i did , after that depreciation is showing both in the accumulated depreciation account and depreciation account
    What are dates in Asset Master ( Capitalization date (1.7.2011  /Ord Dep Start date (1.7.2011)  ). What is Dep Key? 5% SLM
    Check the DepKey in Asset Master CHECKED  , asset master  AUS 5% SLM
    Check DepKey settings aft AFAMA and identify base method ( 0014)   _*
    YOU MEAN I HAVE TO CHANGE THIS 0014 to 0016 WHICH IS IMMEDITATE_*
    At SPRO-Financial Accounting (New)-Asset Accounting-Depreciation-Valuation Methods-Depreciation Key-Calculation Methods-Define Base Methods
    Check selection of Dep method and change it to immediate depreciation.. COULD YOU PLZ EXPLAIN WHERE SHOULD I CHANGE ?
    Re run Dep at AFAB and F-92 . RUN , DEPRECIATION IS SHOWING CORRECTLY BOTH IN ACCUMULATED DEPR  AND DEPRECIATION ( EXP) ACCOUNT
    STILL SHOWING ONLY  ITEMS  IN F-92
    regards
    Jaison

  • Item level ststus not showing search list for agent inbox

    Hi,
    while selecting item level ststus in agent inbox it is not showing records in search list.so many records existed in system based on item leval ststuses.
    currently working on crm 7.0
    can u please help me out to solve this issue
    Thanks & Regards
    kishore kumar

    Hi,
    i performed all settings regarding map inbox etc.still i am not able to see results list based on item level ststus.these ststus profile assaigned to item catageory
    Thanks & Regards
    Kishore Kumar

Maybe you are looking for

  • How can i link one composition to another?

    Hi, I'm a beginner yet, so my question might be stupid, sorry for that. I have two compositions, and i'd like to make an action linking them. For example, when i click on the element on my stage in composition1, it should show composition2. How can i

  • How can I give me the access to create a developer key in the market?

    Hi! I'm new in the basis area and I don't have access to create a developer key. A consultant need a developer key. How can I give me the access in the market place to create it? Thanks!

  • Please not another ABAP vs. Java-Thread, BUT ...

    Hi, folks! I already had several inspiring discussions about the need for 2 different languages within one Enterprise System, but right now I' d like to take a more personal approach to this matter. I' m working within SAP business for about 3 years

  • Jitter in video playback

    I am experiencing this jittering when playing video in fcp or when i export out the final quicktime file and play it in quicktime. But the curious thing is the jitter appears on my editing computer but not when i play the final file on my powerbook.

  • Pause SLA Clock in CRM_DNO_MONITOR

    Dear Experts Is there any way to pause the SLA Clock while the Status of Support Message in CRM_DNO_MONITOR will be changed to Customer Action ?? The SLA Clock will be resumed after changing the User Status from Customer Action to other Status. Pleas