Created Webi report using BEx Query.

Hi All,
I am going to upgrade in BW and using BEx & Webi Report. I have created webi report using BEx query. Now I need to test data in webi report.
Can anyone tell me how to test data?
Regards,

Hi,
compare the webi report data with Bex report. more you can compare webi report with SAP R3 system for random records.
Thanks,
Amit

Similar Messages

WebI Report using BW Query

Hi,
I am using WebI Report using BW Query. I don't see some Formulas in Universe which is there in BEx Query.
Did anybody face the same problem before?

Hi,
I meant that you should post in the forum the calculation contained in the formula that you cannot see in your universe.
But let's start from the begining since you are new to SAP: Did you generated the universe yourself? If the formula was added in the query after the universe was created then you must refresh your universe (In the Universe designer please select the option "Refresh structure" under the "view" menu) in order to get the newly created formula (I assume we are takling about a calculate figure here) in your universe also.
Regards,
Stratos

Error while connecting executing a webi report from Bex query.

hi all,
i need to create one webi report fron Bex query based on sab BW.
But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
i didnt get this msg.
please help

Hi Mohit Gupta,
Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
This solved the issue for me.
Thanks,
Chaitanya Krishna

Unable to create web reports using WAD in BI 7.0

We are unable to create web reports using WAD in BI 7.0 because of the missing BI metadata. Please take a look at the error below .

didnt see the error??

4.x: Document Link passing range parameter to a WebI rpt using BEx query

I'm new to working with BEx queries, so I may use the wrong terminology. I'm trying to create a document hyperlink from one WebI report to another. Both are based on BEx queries, which I didn't create, nor do I have access to modify. The BEx query for the target report has a parameter, Fiscal year/period, which is a range parameter. The displayed value in a report or in pick lists is in the format "JUL 2010". The key is in the format "K4/007/2010".
I have tried using the Document Link expert to configure passing the range parameter, but have been unsuccessful. The typical result is an error message, ERR_WIS_30270, which is most likely the result of an incorrect format for passing the range. I've not been able to locate adequate documentation that describes the syntax for passing a range value to a BEx parameter. I've successfully created Document Links to reports using BEx queries that have a parameter that requires a single value, and I've done Document links in non-Bex reports in 3.1 without issues.
Has anyone successfully passed a range value to a BEx paramter? If so, what syntax did you use?
The environment is BI 4.0, sp 2 (14.0.2.439)
Edited by: Steve Green on Oct 7, 2011 8:04 PM

Marianne,
Thanks for the heads up on the fixpack. I tried looking at the note # you sent, but a search of SAP Notes says that the note has not been released. However, reviewing the Fixed Issues in fixpack 6 shows the following item:
ADAPT01580012
Link to a WebIntelligence report using syntax OpenDocument fails when target document contains a prompt
based on a BEx variable of type Interval. Error message is "An internal error occurred while calling
'answerPromptEx' API. (Error: ERR_WIS_30270)".
Behavior is now correct and refresh operation takes into account interval answer passed in OpenDocument URL.
Now we just need to upgrade to fp 2.6 to see if it resolves this issue. I've also opened a ticket with support, so I'll see what they say.
Edited by: Steve Green on Oct 12, 2011 7:27 PM

WebI Report using BW Query (Getting Error for User Response Function)

Hello Experts,
I have created WebI Report on top of BW query. All the prompts are coming from BW query. I was trying to create user response function but it's not working. Do I need to use special function or I can't use.
Any help would be highly appreciated.
Thanks
Nisniki

hi Nisniki,
take a look here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a45246-ce76-2b10-e688-f5c8206203eb
Ingo

Issue with webi report on BEx query

Hi,
I have created a universe on top of Bex query. There is no issue in creating and exporting the universe. But when I try to create a webi report out that BEx query, I am not able to see the values. Say if I have a column called "Company" I am getting the value as "All Company" and so on. What will be the issue?
But when a report is generated out of BEx analyser they are able to see the values properly.
Same user credentials are used in both the places (Importing the query into universe, Connecting to BEx Analyser) .
Thanks & Regards,
Subbu S

Hi Subbu,
the universe will generate a L00 item and a L01 item. The L00 item shows the All member of the characteristic in the case of a flat list and the Top level nodes from a hierarchy. the L01 item should give you what you looking for.
Ingo

#Multivalue Error on Webi when Using BEx Query

Hi All,
I have created a Webi Report on top of SAP BW BEx Query. I have created a variable in Webi on top of a dimension. When I add that variable in the report block some of the Measures are showing as #Multivalue. I know we can get rid of this by creating a universe and then changing the properties of the measure to sum. However we do not plan to have a universe and would want to make the changes in the BEx query or in the Webi Report whereever applicable.
Kindly suggest the solution at the earliest.
Regards,
James

HI James,
Creat Variable =
=sum(Tonumber([Dimension]))
use this variable in report , it will help you
Regards,
Mahi

WebI Prompts using BEx Query Variables

Hello,
I have the following issues with WebI report selection input paramaters (prompts) that use BW BEx Query variables. Could anyone please assist?
Issue 1:
The WebI report has one mandatory and two optional input paramaters (all paramaters from BW BEx Query). When I execute the report via WebI rich client directly, enter the value for mandatory input parameter and leave blanks for both optional input parameters, the report ran OK and has no issue. However, when I ran it through CMC a strange thing happen: I could not select the value for mandatory input paramater as it requires to have values for both optional input paramaters first (which I wish to have them blank and optional). When I refersh values for the mandatory paramater, it says "List of Values for current prompt requires values for following prompts:...(ie. the two optional parameters).
Anyone has any idea - it seems like it is a CMC issue for the WebI...
Issue 2:
Take the same WebI report above, the issue here is the order sequence of the prompts (ie. the selection input parameters). How can we change/control the sequence of the prompts? Whatever sequence of the varaiables (input paramters) in BW BEx Query, the WebI ignores it. Please advise.
Thanks & Regards,
Andy

I did not see separate thread for issue #1, therefore I'll us this thread.
I am running into similar issue when I get an error message ''List of Values for current prompt requires values for following prompts: <Name of the prompt>".
We are using BO V4, SP2, Patch 10 with SAP BW as DB via BEx queries.
I opened support ticket for this issue since obviousely it's still an issue after applying patch 10.
It's not an issue when 'Rich Internet Application' option is selected to view report in 'Reading' mode (via Launchpad Preferences then Web Inteligence; defautl value for viewing is 'Web').
I have not tried to use Client tools but even if it works with Client tools - it is not a solution for us. Our company does not plan to install client tools on end user computers.
Bigger issue us is that report scheduling invokes Web version (not Rich Internet Application). Therefore we cannot schedule report that is giving us problem described. I tried scheduling report from Launchpad and from CMC and both game me error highlighted.

WEBI report on BEx query.

Hi All,
Im new to BO.
Im trying to create a WEBI report on a BEx query in BO 4.0.
But when i click on new query and select BEx there r no connections available.
Do i need to create connections? if so how can it b done?
or
Do i need to login to BI system from WEBI end.
Please let me know.
Thanks,
Sujith

Hi,
Yes, you need a login (for BI and BW)
the connection to the SAP entitlement system needs to be created in IDT or CMC (OLAP connection > BICS API)
Regards,
H
p.s. product help guides are here: http://help.sap.com/bobi
training modules are here: http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000706207&_SCENARIO=01100035870000000202&
you'll need an SMP "S-user"

Webi report on Bex Query takes very long to refresh.

Hi All,
I have a report in webi on bex query which takes forever to give me data which is only 1000 rows. In our Development environment its completely fine but in our UAT environment its extremely slow. i can not push it to production until i have same performance as development environment. Can someone help to point me in the right direction? Have tried to run that Bex directly against BW and its fine takes a few secs. But in webi takes almost 10 mins. Thank you.

A) Please, state exact version and patch level of involved SAP BusObjects system as well as SAP BW system. There have been many improvements with respect to perfromance.
B) Are you using BICS for Webi (recommended) to connect directly to SAP BEx query or the old and slow OLAP UNV approach?
C) Are you using the same navigation state in Webi as in BEx Analyzer or are there more dimensions in the Webi query panel than shown in BEx Analyzer?

Can create Webi report using multiple universe (multiple datasource)

Hi All,
Can we create a Webi report from multiple universe (can say multiple dataprovider & datasource)?
Please suggest.
Regards,

You can bring as many sources together into one report as you like.
However, to use them together you must have some common dimension, such as a particular Sold To Party, Business Partner, etc. You can then use merge dimensions to develop your report but you will need to be aware that dimensions that are NOT Common to both data providers cannot be used in a table combining two data providers.
So, if data provider one has dimensions Resort, Product and Year and a measure object Sales Value
while data provider one has dimensions Resort and Year and a measure object Cost Value, you cannot use Product in a report but you can display Resort, Year, Sales Value and Cost Value together to show you how much revenue each resort is generating each year and how much it is costing you to do so. To have product in the report table, you would need to add it to data provider two.
Hope that clears it up for you.
Regards,
Mark

An error occured while created webi rpt on BEx and displaying data?

Hi Experts,
I have a problem which many couldnt able to provide a better solution and solve it.
Need your expert solutions.
Installed SAP BI with BO(R/3) integration kit SP3.
Created WEBI report on BEx report via Universe. While trying to load/ refresh/ retrieving the data for display it is throwing an error message like the mentioned below.
Query1: UniverseOnSAPBEx2
A database error occurred. The Database error text is: The MDX query SELECT { [Measures].[ZPrice] } ON COLUMNS, NON EMPTY CROSSJOIN( [ZVNAME].[LEVEL00].MEMBERS, [ZVID1].[LEVEL00].MEMBERS) ON ROWS FROM [$ZICTEST] failed to execute with the error.
UNKNOWN error. (WIS 10901)
Some fields in the Cube/ BEx/ Universe/ WEBI that i have used are ZPrice, ZVendorId, ZVendorName etc.
Regards

this looks like an issue with
"SAP BI and BO(R/3) with integration kit sp3"
I think there may be a better forum

WebI Report on BEx ignoring the filter values

Hallo experts,
I have a Webi report on BEx query.
We have two BEx Variables; one for Manual input and other one is a Customer Exit to calculate YTD on 0CALMONTH(Calender Month/Year).
We've created Webi report on this Bex query.
When we selected a value in webi prompt then it is ignoring the value and delivering all the data for previous years also.
But when we selected the value in Bex variable then it is giving only values which we selected.
For example:
We have data in our cubes for 2013 and 2014.
We selected in webi prompt JUN 2014 ------ in this case webi is delivering all the data for all the months and years (i:e JAN - DEC for 2013 and 2014)
We selected in Bex variable JUN 2014 ----in this case Bex is delivering only values for JAN 2014 until JUN 2014 for only 2014.
So, BEx is working as should be but not Webi.
Any ideas to solve this Webi issues would be appreciated.
Thanks
Indra

Hallo Sathish,
When I am placing input variable in a dummy key figure, I am getting values for one month less.
Example: i am selecting JUN 2014 and it is delivering values until MAY 2014.
Thanks
Indra

Cosmetic issue in WEBI report while creating on top of BEX query

While Creating WEBI report on tob of BEX Query, it is displaying both Technical names and descriptions at webi design level.
The infoobjects we had used in BEx Query is Navigation Attributes.
In case if we are using normal Infoobjects, we can able to restrict as per my requirement like uniqe name, description or both.
In this webi report user(Power user) having flexibility to drag and drop available characteristics.
Due to this issue column heading is displaying both technical name and description. For example Customer(ZCUSTOMER)

How come , if it is display for data means it also need to be display for header (Dimension also).
you can try alternatively in webi by creating variable for that Iobj .
Refer below blog provide details:
BOBJ Tricks: Toggle the Display of Text and Key in Webi
Regards,
Seshu.P

Created Webi report using BEx Query.

Similar Messages

Maybe you are looking for