Creating 2 separate tables with thin borders

I am trying to create 2 separate tables that have a thin
border and a space between the 2 tables. I am new to CSS but have
used Dreamweaver since its infancy,
Check this link for what I am referring to
http://www.sprucebodylab.com/index.php
Thanks

Many ways to do that. An easy way would be to construct an
outer table
container with two cells, and insert an inner table in each
cell. Thin
borders require CSS styling.
HTH
"Toby-Joe" <[email protected]> wrote in
message
news:ff6i4l$5p6$[email protected]..
>I am trying to create 2 separate tables that have a thin
border and a space
> between the 2 tables. I am new to CSS but have used
Dreamweaver since its
> infancy,
>
> Check this link for what I am referring to
>
>
http://www.sprucebodylab.com/index.php
>
> Thanks
>

Similar Messages

Dynamicly creating an internal table with header line

Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!

Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping.

Creating Dynamic Internal table with a dynamic name

Hi,
I want to create dynamic internal tables with dynamic names.
For example:
Suppose I have a table with three fields.
1. Structure name
2.Fields
3.file
And the structure of the internal table is as follows:
TYPES:BEGIN OF table_type,
 struct TYPE char70,
 fields TYPE tt_type OCCURS 0,
 File TYPE ttab_type OCCURS 0,
 END OF table_type.
Suppose I have one record inside my internal table with struct as "STRUCTURE", fields have an internal table content of set of fields and File has some set of records.
Now I want to create dynamic internal table whose name will be "STRUCTURE" , the fields of the dynamic internal table structure[] will be as in fields, and the records will be as in File.
Like this if i have 100 records in my internal table then I have to create 100 dynamic internal table dynamically.
Can anyone suggest how to do this?
Edited by: Jjammy on Jul 22, 2009 7:52 AM

Hi,
Check the sample program and develop your program accordingly.
<pre>
REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS:
 slis.
*Types
TYPES:
 ty_fcat TYPE lvc_s_fcat,
 ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
 wa_fcat TYPE ty_fcat,
 wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
 it_fcat TYPE STANDARD TABLE OF ty_fcat,
 it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
 it_dyn_tab TYPE REF TO data,
 wa_newline TYPE REF TO data.
*Filed symbols
FIELD-SYMBOLS:
 <gt_table> TYPE STANDARD TABLE,
 <fs_dyntable>,
 <fs_fldval> TYPE ANY,
 <l_field> TYPE ANY.
*Variables
DATA:
 l_fieldname TYPE lvc_s_fcat-fieldname,
 l_tabname TYPE lvc_s_fcat-tabname,
 l_fieldtext TYPE lvc_s_fcat-seltext,
 l_index TYPE char2.
"Selection-screen
PARAMETERS:
 p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
 DO p_colms TIMES.
 l_index = sy-index.
 CONCATENATE 'FIELD' l_index INTO l_fieldname.
 ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
 <l_field> = sy-index.
 ENDDO.
 INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_fcat INTO wa_fcat.
 PERFORM fieldcatalog1 USING: wa_fcat-fieldname
 wa_fcat-tabname
 wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = 'ZTEST_NOTEPAD'
 it_fieldcat = it_fcatalog
 TABLES
 t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
 l_tabname,
 l_fieldtext,
 l_index.
DO p_colms TIMES.
 CLEAR l_index.
 l_index = sy-index.
 CONCATENATE 'FIELD' l_index INTO l_fieldname.
 CONCATENATE 'Field' l_index INTO l_fieldtext.
 l_tabname = '<GT_TABLE>'.
 PERFORM fieldcatalog USING: l_fieldname
 l_tabname
 l_fieldtext.
ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fcat
 IMPORTING
 ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1 </pre>

Thanks
Venkat.O

Creating dynamic internal table with deep structure

Hi all,
I need to create an internal table with deep structure dynamically. I've already created tables with method 'create_dynamic_table' but I'm struggling with the deep structure.
I would need an internal table with the following structure:
DATA: BEGIN OF lt_t1,
s1 TYPE REF TO data,
s2 TYPE REF TO data,
END OF lt_t1.
S1 and S2 have to be tables.
It might be possible with RTTS but all the examples in the forums (that I've found so far) are related to at least one DDIC-structure. And that's my problem because both tables are created during runtime.
Thank you in advance
Nicola

Hi Frédéric,
I hope my english is good enough to explain it correctly:
We use a function builder for SEM-BPS which copies data from one Cube to another. This Cube is transactional, so you can't easily read a structure out of DDIC.
The export parameter of this function builder is a table with type 'any table'.
Until today we used a fixed definition e.g.:
TYPES:
    BEGIN OF xtyp_chas,
     /sie/sr_ocomp TYPE /b52/oisr_ocomp,
     /sie/ts_03psp TYPE /b52/oits_03psp,
     0activity     TYPE /bi0/oiactivity,
     0acty_elemt   TYPE /bi0/oiacty_elemt,
     0costelmnt    TYPE /bi0/oicostelmnt,
     0co_area      TYPE /bi0/oico_area,
     0creditor     TYPE /bi0/oicreditor,
     0currency     TYPE /bi0/oicurrency,
     0curtype      TYPE /bi0/oicurtype,
     0db_cr_ind    TYPE /bi0/oidb_cr_ind,
     0fiscper      TYPE /bi0/oifiscper,
     0fiscper3     TYPE /bi0/oifiscper3,
     0fiscyear     TYPE /bi0/oifiscyear,
     0metype       TYPE /bi0/oimetype,
     0network      TYPE /bi0/oinetwork,
     0part_actty   TYPE /bi0/oipart_actty,
     0part_cctr    TYPE /bi0/oipart_cctr,
     0piobjsv      TYPE /bi0/oipiobjsv,
     0project      TYPE /bi0/oiproject,
     0unit         TYPE /bi0/oiunit,
     0vtdetail     TYPE /bi0/oivtdetail,
     0vtstat       TYPE /bi0/oivtstat,
     0vtype        TYPE /bi0/oivtype,
     0bus_area     TYPE /bi0/oibus_area,
     0cashdetail   TYPE /bi0/oicashdetail,
     0cashtype     TYPE /bi0/oicashtype,
     0comp_code    TYPE /bi0/oicomp_code,
     0coorder      TYPE /bi0/oicoorder,
     0cs_dimen     TYPE /bi0/oics_dimen,
     0cs_unit      TYPE /bi0/oics_unit,
     0int_bus      TYPE /bi0/oiint_bus,
     0part_abcpr   TYPE /bi0/oipart_abcpr,
     0part_coord   TYPE /bi0/oipart_coord,
     0part_wbsel   TYPE /bi0/oipart_wbsel,
     0piovalue     TYPE /bi0/oipiovalue,
     0profit_ctr   TYPE /bi0/oiprofit_ctr,
     0ps_obj       TYPE /bi0/oips_obj,
     0statussys0   TYPE /bi0/oistatussys0,
     zfbwheroj     TYPE /bic/oizfbwheroj,
    END   OF xtyp_chas,
    BEGIN OF xtyp_kyfs,
      0amount      TYPE /bi0/oiamount,
      0quantity    TYPE /bi0/oiquantity,
      zf03oaws     TYPE /bic/oizf03oaws,
      zf03oqty     TYPE /bic/oizf03oqty,
      zf03ozsta    TYPE /bic/oizf03ozsta,
    END OF xtyp_kyfs,
    BEGIN OF xtyp_zf03g003,
      s_chas TYPE xtyp_chas,
      s_kyfs TYPE xtyp_kyfs,
    END   OF xtyp_zf03g003,
    xtyp_zf03g003_t TYPE HASHED TABLE OF xtyp_zf03g003
                      WITH UNIQUE KEY s_chas.
DATA: lt_ibm_data TYPE xtyp_zf03g003_t,
      ls_ibm_data TYPE xtyp_zf03g003.
So one table (s_chas) contains the characteristics of the Cube and the other (s_kyfs) contains the keyfigures. That's exactly the format we need for the export parameter. At the end of the program, we use the following coding to fill the export table (eto_chas):
loop at lt_ibm_data into ls_ibm_data.
collect ls_ibm_data-s_chas into eto_chas.
endloop.
So in this moment I give this table the structure that is needed to move the data into the cube. I can't change the requirement because it is a standard interface.
I would like to change that coding to be dynamically. Because if somebody changes a charasteristic or a keyfigure in the cube, we would have to change the function builder too. I don't think that the SEM-BPS department will let us know every time they've changed something anyway.
So I hope that my explanation wasn't too confusing
Nicola

Create dynamic internal table with dynamic structure

I have an internal table itab1 that have 12 amount fields from period1 thru period12. I need to create a dynamic table with dynamic structure for the period column if the total amount of each column is > 0. Any idea on how to do that?
For example if my itab1 has 20 rows and the sum of period1 = 35, sum of period2 = 0, sum of period3 = 5, sum of period4 =0, sum of period5 = 2 then I need to create a dynamic structure for the field column that have the total > 0, i.e structure struct1 have field period1, period3 and period5 only. Then I will need to load the data to itab2 from itab1. Can someone help.
Thanks. I am on 4.7 and will upgrade to ERP 6.0 soon.

go throgh this....
REPORT yusmm_text1 NO STANDARD PAGE HEADING
 LINE-SIZE 199.
T A B L E S
TABLES: MARA,
 MAKT,
 THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
 GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
 MATNR TYPE MARA-MATNR,
 BEGRU TYPE MARA-BEGRU,
 MTART TYPE MARA-MTART,
 MAKTX TYPE MAKT-MAKTX,
 SPRAS TYPE MAKT-SPRAS,
 LTXT(2000) TYPE C ,
 SRNO TYPE N ,
 END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
 SPRAS TYPE T002-SPRAS,
 LAISO TYPE T002-LAISO,
 SRNO TYPE N ,
 END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
 MATNR TYPE MARA-MATNR,
 BEGRU TYPE MARA-BEGRU,
 MTART TYPE MARA-MTART,
 SPRAS TYPE MAKT-SPRAS,
 MAKTX TYPE MAKT-MAKTX,
 END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
 matnr TYPE mara-matnr,
 END OF tp_matnr.
 GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
 gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
 gv_lit TYPE I,
 gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
 gv_li1(3) TYPE N,
 g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
 GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
 T_NEWLINE TYPE REF TO DATA,
 T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
 T_FLDCAT TYPE LVC_T_FCAT,
 WA_IT_FLDCAT TYPE LVC_S_FCAT,
 WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
 WA_COLNO(2) TYPE N,
 WA_FLNAME(5) TYPE C,
 L_LT TYPE SLIS_LAYOUT_ALV.
 GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
 WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
 WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
 WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
 WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
 INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
 INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
 "tablename
 <FS_DYNTABLE>, "Field symbol to create work area
 <FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
 <FS_DATA1> TYPE REF TO DATA,
 <FS_2> TYPE STANDARD TABLE,
 <FS_22> TYPE STANDARD TABLE,
 <FS_1>,
 <FS_11>,
 <F>,
 <FA>,
 <LWA_LINE_WA>,
 <LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
 LT_DATA1 TYPE REF TO DATA,
 LWA_LINE TYPE REF TO DATA,
 LWA_LINE1 TYPE REF TO DATA,
 LI_FIELD_CAT TYPE LVC_T_FCAT,
 LWA_FIELD_CAT TYPE LVC_S_FCAT.
 PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
 OBLIGATORY ,
 S_MATNR FOR MARA-MATNR,
 S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
 INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
 MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
 MESSAGE W130(26) WITH TEXT-004.
 SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'Material Number'.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'Authorization Group'.
 g_VAR11 = wg_final-srno + 2.
 gv_li1 = gv_li1 + 2.
 MOVE : g_var11 TO gv_i1.
 ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'MatDesc'.
 g_var2 = g_var11 + gv_lines.
 ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'BasicData'.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 EXIT.
 ENDLOOP.
LOOP AT ig_final INTO wg_final.
 AT NEW matnr.
 gv_index = sy-tabix.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-matnr.
 ENDAT.
 AT NEW MATNR.
 GV_INDEX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-matnr.
 ENDAT.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-begru.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-begru.
 gv_var = wg_final-srno + 2.
 gv_li = gv_li + 2.
 MOVE : gv_var TO gv_i.
 ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-maktx.
 ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-maktx.
 gv_var1 = gv_var + gv_lines .
 ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-ltxt.
 ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-ltxt.
 AT END OF matnr.
 APPEND <LWA_LINE_WA> TO <FS_2>.
 CLEAR <LWA_LINE_WA>.
 ENDAT.
 AT END OF matnr.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 CLEAR <LWA_LINE_WA1>.
 ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
 text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
 from mara up to gp_size rows
 appending corresponding fields of table ig_matnr
 where matnr in s_matnr
 and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
 MARA~BEGRU
 MARA~MTART
 MAKT~SPRAS
 MAKT~MAKTX FROM MARA INNER JOIN MAKT
 ON MARAMATNR = MAKTMATNR
 appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
 WHERE makt~spras IN s_spras
 AND mara~matnr IN s_matnr
 AND mara~mtart IN s_mtart
 AND mara~matnr EQ ig_matnr-matnr.
 endloop.
IF sy-subrc = 0.
 SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
 text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
 wg_final-MATNR = wg_mara_makt-MATNR.
 wg_final-BEGRU = wg_mara_makt-BEGRU.
 wg_final-MTART = wg_mara_makt-MTART.
 wg_final-SPRAS = wg_mara_makt-SPRAS.
 wg_final-MAKTX = wg_mara_makt-MAKTX.
 READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
 IF sy-subrc = 0.
 wg_final-srno = wg_t002-srno.
 ENDIF.
 CLEAR ig_thead[].
 ig_thead-TDOBJECT = 'MATERIAL'.
 ig_thead-TDNAME = wg_final-matnr.
 ig_thead-TDID = 'GRUN'.
 ig_thead-TDSPRAS = wg_final-spras.
 CALL FUNCTION 'TEXT_READ'
 EXPORTING
 I_HEADER = IG_THEAD
 I_READONLY = 'X'
 IMPORTING
 E_HEADER = IG_THEAD
 TABLES
 T_LINES = IG_TLINE[]
 EXCEPTIONS
 NOTFOUND = 1.
 IF sy-subrc EQ 0.
 LOOP AT ig_tline.
 gv_strg = ig_tline-tdline.
 IF gv_strg1 <> ' '.
 CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
 ELSE.
 gv_strg1 = gv_strg.
 ENDIF.
 ENDLOOP.
 wg_final-ltxt = gv_strg1.
 APPEND wg_final TO ig_final.
 CLEAR wg_final.
 gv_strg1 = ' '.
 ELSE.
 APPEND wg_final TO ig_final.
 ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
 text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
 text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
 LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
 WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
 g_v = g_v + 1.
 Wg_t002-srno = g_v.
 MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
 CLEAR WA_IT_FLDCAT.
 MOVE SY-INDEX TO WA_COLNO.
 CONCATENATE 'MD-' wg_t002-LAISO
 WA_COLNO
 INTO WA_FLNAME.
 WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
 WA_IT_FLDCAT-INTLEN = 250.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO T_FLDCAT.
 CLEAR wg_t002.
 ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
 CLEAR WA_IT_FLDCAT.
 MOVE SY-INDEX TO WA_COLNO.
 CONCATENATE 'BD-' wg_t002-LAISO
 WA_COLNO
 INTO WA_FLNAME.
 WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
 WA_IT_FLDCAT-INTLEN = 250.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO T_FLDCAT.
 CLEAR wg_t002.
 ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA> " Dynamic Internal Table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
 WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
 WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
 WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
 WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
 APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
 CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA1> " Dynamic Internal table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
 text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = GV_REPID
 I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = L_LT
 IT_FIELDCAT = T_FLDCAT1[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = <FS_2>
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
 IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
 WHEN 'DOWNLOAD'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
 TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE =
 FILENAME = 'C:\Material-Text.xls'
 FILETYPE = 'ASC'
 APPEND = ' '
 WRITE_FIELD_SEPARATOR = 'X'
 HEADER = '00'
 TRUNC_TRAILING_BLANKS = 'X'
 WRITE_LF = 'X'
 COL_SELECT = ' '
 COL_SELECT_MASK = ' '
 DAT_MODE = 'X'
 IMPORTING
 FILELENGTH = GL_LENGHT
 TABLES
 DATA_TAB = <FS_22>
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 IF GL_LENGHT NE 0.
 MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
 ENDIF.
ENDCASE.
ENDFORM. "user_command
Thanks

How to create database and table with GUI?

How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanks

go to www.orasoft.org
here is a gui tool.
null

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

DECODE versus creating a separate table and doing a join

Hi,
This question is on what Oracle does internally for the decode function on a field value.
I have two options:
(i) use the decode function to do a quick and dirty SQL statement
(ii) create a table that has the results what that decode will do, and do a join with that table.
I tend to shy away from using decode in SQL, since I hate the idea of putting business information into an SQL statement, and also I thought using functions of any kind slowed SQL down, and that one should limit it as much as possible "standard" SQL.
Is the gain from using a separate table real, illusory or is it worse than using DECODE?
Thanks,
Regards,
Srini

Thanks for all the responses. I talked with my DBA and decided to go with the table option rather than the decode option. Here are the reasons.
1. Mixing business information in your program is never a good idea (this of course goes beyond just SQL/Oracle, applying to all programming). This is related to what you mentioned, Kevin. I don't want to restrict the names in my tables simply because I have hard-coded something into my program. Over a period of time, this would result in a minefield of decodes.
2. I forgot to mention - the decode would be in my 'where' clause - that is why I had the question on speed. It seemed to me that if the system had to translate each field, it could obviously not take advantage of any indexing the column had, and would be slower. Cartesian products are bad enough, we don't want a computation to be tacked on to it as well, right?
Regards,
Srini

How to Create a Temporary Table with SQL Server

I know you can create a temporary table in SQL Server 2000, but not quite sure how to do it in CFMX 7, i.e., does the SQL go inside a <CFQUERY dbtype="query"> tag?
I'm pulling the main set of records from an Oracle server (1st data source), but it does not contain employee names, only employee IDs. Since I need to show the employee name along with the Emp ID, I'm then pulling a list of "current" employee names from a SQL Server (2nd data source), which is the main database on our CF server.
I've got a QofQ that works fine, except it only matches EmpIDs that exist in both result sets. Employees who are no longer employed, don't match, and don't display. Since I can't do a LEFT OUTER JOIN with a QofQ, what I need to do is get the records from the Oracle server into the SQL Server. Preferably in a temporary table.
I was hoping if I could get those Oracle records written to a temp table on the main SQL Server, in same database as the Employee Name table, I could then write a normal <CFQUERY> that uses a LEFT OUTER JOIN.
I think I could probably write a Stored Procedure that would execute the SQL to create the temporary table, but am trying to avoid having to write the SP, and do it the simplest way.
This query will be a program that can be run hundreds of times per day, with a form that allows users to select date ranges, locations, and other options. That starts the queries, which creates the report. So I just need the temp table to exist only until all the SQL has run, and the <CFOUTPUT> has generated a report.
If the premise is right, I just need some help with the syntax for creating a SQL Server temp table, when you want to write records to it from an external data source. I'm trying the following, but getting an error:
<CFQUERY name="ITE_Temp" datasource="SkynetSQL">
CREATE TABLE #MyTemp
( INSERT INTO #MyTemp
ITE2.TrueFile char (7) NOT NULL,
ITE2.CountOfEmployee int NULL,
ITE2.DTL_SUBTOT decimal NULL,
ITE2.EMPTYPE char (3) NULL,
ITE2.ARPT_CD char (3) NULL
</CFQUERY>
So I actually created a permanent table on the SQL Server, and wrote the below SQL, which does work, and does write the records to table. I can then write another CFQUERY with a LEFT OUTER JOIN, and get all the records, including those that don't have matching employee name:
<CFQUERY datasource="SkynetSQL">
<CFLOOP index="i" from="1" to = "#ITE2.RecordCount#">
INSERT INTO ITE_Temp
 (FullFile,
 EmployeeCount,
 DTL_Amount,
 EmployeeType,
 station)
VALUES ('#ITE2.TrueFile[i]#',
 #ITE2.CountOfEmployee[i]#,
 #ITE2.DTL_SUBTOT[i]#,
 '#ITE2.EMPTYPE[i]#',
 '#ITE2.ARPT_CD[i]#')
</CFLOOP>
</CFQUERY>
But, I hate to have to create a table and physically write to it. For one, it seems slower, and doing it in temp would be in memory, and probably much faster, correct? Is there some way to code the above, so that it does something similar, but in a TEMPORARY TABLE? If I can figure out how to do this, I can pull data from multiple data sources and servers, and using SQL Server temp tables, work with the data as if it was all on the same SQL Server, and do some cool reports.
Everything I've done for the past few years, has all been from data from a single source, whether SQL Server, or another server. Now I need to start writing reports where data can come from 3 or 4 different servers, and be able to do joins (inner and outer). Thanks for any advice/help. Much appreciated.
Gary

While waiting to hear back, I was able to write the query results from an outside Oracle server, to a table on the local SQL Server, and do the LEFT OUTER JOIN required for the final query and report to work. That was with this syntax:
<CFQUERY name="AddTableRecords" datasource="MyTable">
TRUNCATE TABLE ITE_Temp
<CFOUTPUT query="ITE2">
INSERT INTO ITE_Temp
(FullFile,EmployeeCount,DTL_Amount,EmployeeType,station)
VALUES
('#TrueFile#', #CountOfEmployee#, #DTL_SUBTOT#, '#EMPTYPE#', '#ARPT_CD#')
</CFOUTPUT>
</CFQUERY>
However, I was not able to write to a temporary table AND read the results. I got the syntax to run to write the above results to a temporary table. But when I tried to read and output the results from the temp table, I got an error. Also, it wouldn't take the single "#" (local) only the global "##" table var, using this syntax. Note that if I didn't have the DROP TABLE in the beginning, the 2nd time you run this query, you get an error telling you the table already exists.
<CFQUERY name="ITE_Temp2" datasource="MyTable">
DROP TABLE ##MyTemp2
CREATE TABLE ##MyTemp2
FullFile char (7) NOT NULL,
EmployeeCount int NULL,
DTL_Amount decimal NULL,
EmployeeType char (3) NULL,
station char (3) NULL
<CFOUTPUT query="ITE2">
INSERT INTO ##MyTemp2 VALUES
'#ITE2.TrueFile#',
#ITE2.CountOfEmployee#,
#ITE2.DTL_SUBTOT#,
'#ITE2.EMPTYPE#',
'#ITE2.ARPT_CD#'
</CFOUTPUT>
</CFQUERY>
So even though the above works, I could use some help in reading/writing the output. I've tried several things similar to below, but they don't work. It't telling me ITE_Temp2 does not exist. It's not easy to find good examples of creating temporary tables in SQL Server.
<CFQUERY name="QueryTest2" datasource="SkynetSQL">
SELECT *
FROM ITE_Temp2
</CFQUERY>
<CFOUTPUT query="ITE_Temp2">
Output from Temp Table 
FullFile: #FullFile#, EmployeeCount: #EmployeeCount#
</CFOUTPUT>
Thanks for any help/advice.
Gary.

How do I create a target table with the same PK as the source table?

I am trying to create a target table in a mapping that will end up with the same primary key as the source table.
It is a simple map that simply uses a subset of the columns of the source table in the target table. I was wanting to create and bind a new table by dragging the columns I want from the source to the initially blank target table operator, change the column names and create a primary key to match the source table.
I can't seem to be able to create a constraint on the table in the mapping. I can create the constraint after the table is created and boound to the database object but the PK doesn't carry back into the mapping.
I need it in the mapping so I can use the UPDATE/INSERT operation and use the 'All Constraints' implementation. The mapping won't let me validate the object without the PK on it in the map.
Believe it or not folks, I am getting better at this.
Thanks very much for the guidance.
Gary

Hi Gary
You are close, you are really close... :-))
You need to do exactly as you propose plus one extra step. Build the map as you describe, binding the new table to the target. Then you edit the table definition to add the primary key and any other constraints you need. After this is the step that you are missing.
You need to do the following:
1. Go back and re-edit the map
2. Right click on the table
3. From the pop up menu, select Reconcile Inbound
4. Set any operators that you need for the UPDATE/INSERT
5. Save the map
6. Commit your changes
The first three steps above make the map read in the indexes and constraints that you set on the table. Finally, you need to deploy the table and then deploy the map.
Hope this helps
Regards
Michael

How to create an internal table with fields from different sources

Hi.
I need to create an internal table where some of the fields are from a database table, and the other fields are user specified. How do i do that?
Example:
DB table ZTAB with fields ZTAB-FIELD1, ZTAB-FIELD2.
I want to create an internal table ITAB with the fields ZTAB-FIELD1, ZTAB-FIELD2 from ZTAB. In addition, I also want to have one more field RECORD_NO, which is not from ZTAB. How do I do it? Could I do something like below?
DATA BEGIN OF ITAB.
        INCLUDE STRUCTURE ZTAB.
DATA RECORD_NO TYPE I.
DATA END OF UPLINE.
Or, are there more efficient way of doing it? Thanks.

hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
           field1 TYPE ztab-field1,
           field2 TYPE ztab-field2,
*your own fields here:
           field TYPE i,
           field(30) TYPE c,
           END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec

What the best way to create User defined table with ADDON purpose

Hi folks, how are you ?
I´m beginner in development to business one, and I m studying to develop ISV addons.
But, during my exercises and analisys, I learned that have two ways to create tables and fields in business one. One way is throght by wizard in business one using Tools Menu > Configuration Tools > User Defined Tables >
Obs: I ´m using Business One Patch Level 9.
Other way, is create the tables and fields using DI API
But, my question is. When I develop one addon, or one UDO form that uses one set of user defined tables or used defined fields that where created by the first way (by wizard in B1), how I deploy this in other business one installation ? The package process will ensure the creation of this tables in another enviroment or I must implement the creation of user defined tables using DI API so that this code is called during the installation?
If in cases of addon develop I must use DI API to create user defined tables, How can I use my classes with this responsibility in package process ?
Thanks my friends.

Hi Renan,
You just need to put your logic in to the startup of your application, after you've established your connection to the UI API and DI API. All this will be triggered in the constructor of your main class.
namespace MyNamespace
public class MyAddon
bool runAddon = true;
bool initialised = false;
const string ADDON_NAME = "My Addon";
public static void Main()
        MyAddon addOn = new MyAddon();
        if(runAddon)
              System.Windows.Forms.Application.Run();
        else
         Application.Exit();
public MyAddon()
        // Connect to SBO session for UI
        if(!SetApplication()) runAddon = false;
private bool SetApplication()
        // Code goes in here to establish UI API and DI API connections
        // See SDK samples for examples
        // You should also define and filter the UI API events your addon will trap at this stage and create any menus
        // Call your routine to check if the required UDFs/UDTs exist on this company
        initialised = CheckInitialisation();
        if (!initialised)
           // AddOn not yet intialised on this company so prompt the user to run the intialisation process
          int iResponse = app.MessageBox("The " + ADDON_NAME + " addon will now create all required fields and tables."
                                         + System.Environment.NewLine + System.Environment.NewLine
                                         + "WARNING: It is strongly recommended that all other users are logged out of this company "
                                         + "before running this process. Are you sure you wish to continue?", 2, "Yes", "No", "");
          if (iResponse == 1) initialised = InitialiseAddOn(); // Call your routine to create the objects
        return true;
Kind Regards,
Owen

Is it possible to create an internal table with FOX?

Hi,
I have a requirement where I need to call a function module from FOX formula (standard functionality). It would help me if I could pass data to the FM in an internal table. Unfortunately I am not sure if this is somehow possible in FOX. I could create the internal table in the FM also, but the FOX-possibility would be more convenient.
I will appreciate if anyone can clarify this.
Regards
Jan

Hi Jan,
Yes, calling a function module through FOX is simpler. Use 'CALL FUNCTION' to call FM "RSPC_CHAIN_START" and pass the required parameters within your FOX formula.
Chk this for reference too:
Launch a Process Chain with module fonction in Fox Formula.

How to create an internal table with a types structure?

Hi experts,
I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that?
Example:
TYPES: Begin of type_s,
               pernr like pa0001-pernr,
             end of type_s.
Data: begin of itab_1 occurs 0,
¿¿¿??? reference to type_s
         end of itab_1.
Thanks a lot,
Regards,
Rebeca

Hi,
Use like this..
DATA: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
DATA: BEGIN OF ITAB_1 OCCURS 0.
INCLUDE STRUCTURE type_s.
DATA: END OF ITAB_1.
Otherwise like this.
types: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: itab_1 type standard table of type_s.
Note: You have to create work area explicitly.
Like this
data wa like itab1.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 26, 2009 1:04 PM

Create an internal table with the rows of another internal table.

Hi I want to know if posible to create an internal table structure with the rows of another internal table?
ex.
If in i_tab column A has this values: row 1 = first, row 2 = second, row 3 = third.
Now I want that the structure of my internal table be: first, second, third

Hi,
If you do this way then what will be the difference between the two table anyway?? First internal table has the same structure irrespective of which row you select. and you are going to store the data from each row to the rows of the second internal table. In that case, the structure of the internal table is the same as first table. and it would have same rows.
Am I missing something here? or you want to declare the internal table with each field being the structure of the first table? In this case you'd have to do a dynamic declaration of data as the first table can have any no of rows then the second table would have any no of fields in the structure.
Now if you know that your first internal table is going to have a fixed no of rows eg 3 rows then it becomes simple. Do the following then
Data: begin of second_table occurs 0,
first type <first_table type>,
second type <first_table type>,
third type <first_table type>,
end of second_table.
Regards
Prasenjit

Creating 2 separate tables with thin borders

Similar Messages

Maybe you are looking for