Creating a 50% picture in picture effect in Pr CS3
I am learning CS3 for the first time after 4 years on Avid. One of my struggles........
I need to create a split screen, equally showing 2 layers of video, a 50% picture in picture effect if you will separated by a thin black divider line. I only see the 25% PiPs on Premiere Pro and can't find any other PiPs in After Effects.
Can anyone tell me how to do this effect?
I thank you in Advance
Bruce
You will find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Specifically:
Picture-in-Picture
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ
Similar Messages
-
Need help with picture-in-picture effect!!! URGENT
I've been trying to find out a way to use a picture-in-picture effect in adobe premiere pro cs3 but it just hasn't been possible.
I know that adobe premiere elements 3.0 has that option, but I can't seem to find it in pro cs3.
Can someone give me a hand? I'd really appreciate it!See if
Wrigley Video Tutorials
has a lesson
Also the Wiki
http://ppro.wikia.com/wiki/Tutorials_and_articles -
have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation. -
How do I re-assemble two halves of a large scanned photo to create the original picture in CS3
How do I re-assemble two halves of a large scanned photo to create the original picture in CS3
Good day!
Is there overlap between the scans?
If so File > Automate > Photomerge might be enough, otherwise you can load both images in one document and manually align/distort them and address color/brightness-diferences with Adjustment Layers.
Regards,
Pfaffenbichler -
How do I create a moving picture with Photoshop?
Hi, I want to create a moving picture using photoshop for my web www.yoshiwafa.com Is it a difficult job for a Beginners Photoshop?
What version of photoshop do you have and what format were you thinking about?
-
Can anyone recommend an alternative software programme to Pages? I have an OS X 10.7.5 macbook pro, so I am unable to get it. I want a programme that I can create docs with pictures and text on, invitations, posters etc. Many thanks in advance…..
LibreOffice
-
How to creat a preview picture for a widget?
Thanks for reading....Some widgets show a preview picture when you click(select) it in the library panel, like the Meta+ Lite widget(http://muse.adobe.com/exchange-library/meta-43-lite). How to do that? I cann't find anything about how to creat a preview picture in MuCow Documentation(http://adobe-muse.github.io/MuCowDocs/).
It's a little tricky but if you follow these steps you should be ok, first download and install 7zip since you will need it. Then do the following:
1. Export your mucow file out as a mulib (muse library file). If you don't know how to do this read this pastebin.
2. Once exported out you should delete the folder you just made.
3. Right click on the exported mulib file on your hard-drive and choose from the popup menu: 7-zip/Open Archive.
4. Inside you should see 3 files like the following (in this case I named my mucow "demo"):
manifest.xml
demo.muse
demo.png
You'll notice you have a PNG file in your archive BUT it is empty. So what you need to do is leave 7-zip open and create your PNG in photoshop or whatever program you use. Make sure to name it the exact name in the archive (in my case demo.png)... a good size is 210x98 px. Save out your PNG and drag it on-top of the PNG in your archive and it will be saved. You can then close 7-zip.
You can then import your mulib file into the muse library panel and you should see your widget now has that PNG you created as a thumbnail image.
-hope this helps!! -
How can I install GIMP for pictures effects ? They say I couldn't cause it's not an apple product ?
10:10 PM Sunday; January 13, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
How to create a fancy picture frame border around an image
Hi there,
Does anybody know how to create a fancy picture frame around
an image that's inside an AP DIV? I want the image to look like
it's a picture hanging on the wall. Any of your guru's know how to
do that - eh then?
Thanks a mill for any help!Find or use your graphics program to create an image of a
frame you like.
Size it so its inside measurements match your picture.
Option 1 - Paste your picture image on the frame image and
insert in your container.
Option 2 - Place your frame image as a non-repeating
background for your container and then insert your picture. -
Creating an image with a Cloud Effect
Can someone please tell me how I can create an image with a
cloud effect like the photo located at the link below:
http://www.arizonamedicalclinic.com/
Thanks in advance for all of your help.Nessa wrote:
> Can someone please tell me how I can create an image
with a cloud effect like the photo located at the link below:
>
>
http://www.arizonamedicalclinic.com/
>
> Thanks in advance for all of your help.
Draw a cloud shape. Fill it with white and add a black inner
glow.
Position the cloud shape over the photo. Press Shift and
select both the
cloud shape and the image. Choose Modify > Mask > Group
as Mask.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm -
How to create shape layer in Adobe After Effects Cs2 ?
How to create shape layer in Adobe After Effects Cs2 ?
THere is no such thing. Shape layers were introduced in CS3.
MYlenium -
How do I create a Full Width Photo for a Liquid Layout - CS3
Greetings & Help!
I'm trying to create a full width photo layout without the
photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time.Greetings & Help!
I'm trying to create a full width photo layout without the
photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time. -
Where can i find installed effects in premiere cs3?
Hi all,
I am new to Premiere.
i am using premiere cs3 and i installed Canapous Video Fx Software in my system.
but i cant find any canapous effects folder and canapous transistions under effects folder in premiere cs3.
could any one please tell me where can i find installed effects in premiere cs3?
Thanks,
Murali.This page says the product is for Premiere 6 and Premiere Pro 1
http://www.expandore.com/product/Post_Production/Canopus/VideoFX.htm
This discussion (at the bottom) says the product does not work with CS3
http://forums.adobe.com/thread/701623 -
Where can I get the After Effects CS6 (not CS3) user's guide.
Where can I get the After Effects CS6 (not CS3) user's guide. I want Adobe's, not a third party.
Todd,
Thanks a ton. I've done searches from search engines, and I've looked at this page many times, but I had not seen this link.
I really apprreciate your help--though you probably think it was a dumb question.
Gary -
Strange "iPOD" Files being Created in My Pictures Folder
A friend of mine wants to know why PSE7 seems to be creating these files in the My Pictures folder whenever she clicks on a PSD file (for example) to start PSE editor? It also seems that if she uses one of the effects on a pic these IPod files are also created.
She has hunderds of these things floating around in various folders. PSE also feels the need to create a manifest.txt file to list them all.
IPod_adding_drama
IPod_advanced_dodge_burn
IPod_blending_layers
IPod_blurring_background
IPod_correcting_images_batch
IPod_correcting_perspective
IPod_create_greeting_card
IPod_create_pdf_slideshow
IPod_create_slideshow
IPod_curved_photo
IPod_frame_layers
IPod_generic
IPod_getting_slideshows_on_tv
IPod_hockneyesque
IPod_insider_tips
IPod_lightening_eyes
IPod_making_skies_blue
IPod_panorama
IPod_photo_collage
IPod_photo_frames
IPod_photo_mail
IPod_pic_in_pic
IPod_quick_fix
IPod_scalloped_brush
IPod_scene_clean
IPod_sharpening_tools
IPod_travel
IPod_type_masks
IPod_unsharp_mask
IPod_whimsical_woodcut
Thaks
JeffSee the ongoing discussion in:
http://www.elementsvillage.com/forums/showthread.php?t=47557
Maybe you are looking for
-
Photoshop CS5.1 Actions Disappeared
I am using Photoshop CS5.1 on a Mac. When launching Photoshop from Lightroom, I got an unexpected error (don't recall now what it said). Unfortunately, my custom workspace and all of my actions (default and user-defined) are gone. I utilize these act
-
I know the MBP and PB are very durable units, and unlike the MB, they dont discolor or get grease marks. I recently was in class today and the person next to me had a MBP and i noticed that on the palm rests there were several scratches - possibly fr
-
Hello- I am making a final cut express video, and want to use an itunes song that I downloaded. I have tried importing it into MPEGStreamline and exporting it as an aiff file. It does it, but there is no sound. I also have quick time player pro as we
-
Hi Did anyone notice that the option of multiple selection using command and shift is not operative as i tried and it would not allow multiple selection. thank you. Jeorme
-
Trouble setting AD attribute for UserAccountControl
I am trying to set UserAccount Control value to 262658 so that Account is disabled and Smart card is required are checked. But for some reason the user is getting created the useraccount control value is not updating. This is simply what I am doing <