Creating a Audible Alarm for ECG data if it surpresses or goes below a certain rate

Once Ive sucessifully processed a ECG singal what is a good way to set up a alerts in the case of the Heartrate exceeding a set parameter or falling below?
Audible or Just a LED turning on is fine.
Thank you!

You need to elaborate on your question.  For example:
Who is receiving the alert?  Nurse? Doctor?  
Where is the nurse/doctor?
Will the alarm be sounded in the patient room?
What are the current working practices at the hospital site?
In general, there is a trend toward using "silent alarms" in hospitals.  And also to send alarms directly to the responsible person (rather than just beeping and blinking a light in the hallway).  Having loud alarms can disturb patients, especially when there are many of them.  Best solution is to sound a silent alarm, but send it to the correct recipient on their handheld device.  Don't just flash a light in the hallway that people will assume someone else is responding to.  Also "force" the alarm recipient to acknowledge the alarm.  This can be done by "annoying" the recipient until they acknowledge (vibrate or increase severity until they respond).  Having loud, constant alarms that are not "sent" to a specific owner, and do not require acknowledgement will lead to "alarm fatigue" (when nurses ignore alarms because there are so many irrelevant alarms).

Similar Messages

  • How to create a RFC destination for extracting data to HANA

    Hello All,
    Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
    I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

    Hi Venkatesh,
    In SM59 t.code we create RFC destinations.
    Go thru the video link for creating RFC destinations step by step
    How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

  • Cisco Prime - create a Fault Alarm for Syslog Messages

    Is it possible to generate an alarm for especific Syslog Messges sent to Cisco Prime?
    Admin > Network > Notification and Action Settings > Syslog Automated Actions
    Here is possible to send an email. But I would like to see the alarm in the Monitoring dashboard.

    Hi Leonardo,
    unfortunately ,Automated action that you create on syslog will not show in the Monitoring dashboard :(
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • How to set alarm for same date every month??

    Is there a way (or an app) that will allow me to set an alarm for the 29th of every month?

    It's not an alarm per say but how about setting up a repeating appointment in the calendar app with an alert?

  • Using FormCentral is there a way to create a drop down for a date?

    In using a previous version of Adobe Professional, in designing fillable PDF forms we were able to create a field with a drop-down date.  Is there any way to do this using FormCentral?

    I think want you are asking is if it is possible for to have a Date Field which when the user click on the field a calendar comes up to pick a date?
    If that is the case then the PDF generated by FormsCentral doesn't support this yet.
    I am guessing that you were using LiveCycle Designer to create forms in the past. The some forms generated by LC Designer does support this type of field.
    If you want to see this added in FormsCentral PDF you can submit a idea here : http://forums.adobe.com/community/formscentral?view=idea&ideaView=5515 (click on the "Create an Idea" link on the right)
    Gen

  • Create parameter in repository for modified date

    Hi all,
    I am new to designer.My client wants a report in repository to populate the modified date of forms and formsname.What parameter do i need to create to diplay the
    1) Name of form
    2) Form Name
    3) Modified date or Updated date of form
    Thanks for your help

    discoverer OLAP reporting is different from the relational reporting. You need to create these two attributes in your OLAP dimension to query on those attributes. The parameter to query the report should be created in the OLAP dimension not in the OLAP report.
    If you want I can explain in more detail but you should be familiar with discoverer olap reporting.
    Thanks
    Brijesh

  • I am getting a 'access denied' alarm for hypertrend data recording

    I recently changed the Windows XP login name and password then resterted the PC. I began to notice the alarm maeeage and the lack of trend line on my trend panel.

    Does this account has the full control permissions to the database directory?
    Ryan Shi
    National Instruments

  • How would I create a Summary Chart for the Current Year Using a Count by Month?

    Post Author: MarkS
    CA Forum: Charts and Graphs
    I have a data set of 3 date fields.  I would like to create a summary counting all of the occurrances of each of these dates per month, similar to using a SumProduct() command in excel.
    For example, my data is as follows:
    Registered Date  |    Application Date   |   Sale Date
    1/1/2007             |      2/1/2007            |     2/20/2007    
    1/10/2007           |      2/1/2007            |     3/20/2007
    2/20/2007           |      3/10/2007          |     3/20/2007
    I would like to summarize this information by month as follows:
                          |  Jan '07   |   Feb '07  |  Mar '07  |  TOTAL
    Registered      |      2        |   1           |    0         |   3
    Applications    |     0         |   2           |   1          |  3
    Sales             |     0         |   1            |  2            |  3
    TOTAL           |   2            |  4            |  3            | 9
    Is there any way to do this?

    Post Author: V361
    CA Forum: Charts and Graphs
    Yes, but it will require some effort. Group on "Sale Date"  Change the group to group by month.   You can then create a running total for "Registered Date","Application Date"," Sale Date"      For Registered date, I used Field to summarize Registered Date,  Type of summary was count, Evaluate use a formula, reset on change of group 1 (I only have one group, "Sale Date")  The formula will look like this.
    month ({Registered Date  }) in [1,2,3,4,5,6,7,8,9,10,11,12]
    You would build your other running totals (Counts) using the same methods,
    Once you have these, you should be able to create your chart.

  • Critical Alarm for Nexus 7010 device

    Hi Team,
    We are getting Critical Alarm for the Data center device Nexus 7010 continuously from 28-Oct.
    error (device hde1) in start_transaction: Journal has aborted - kernel
    2012 Oct 29 10:00:18.227 DC-Core-Switch2 29 10:00:18 %KERN-2-SYSTEM_MSG: EXT3-fs
    error (device hde1) in start_transaction: Journal has aborted - kernel
    2012 Oct 29 10:28:37.497 DC-Core-Switch2 29 10:28:37 %KERN-2-SYSTEM_MSG: EXT3-fs
    error (device hde1) in start_transaction: Journal has aborted - kernel
    2012 Oct 29 10:28:42.398 DC-Core-Switch2 29 10:28:42 %KERN-2-SYSTEM_MSG: EXT3-fs
    Also attaching the complete logs collected for this device and suggest if there is any Hardware related issue or some Software related issue.
    Regards,
    Ashutosh

    Hello
    hde1 is the logflash device. Looks like there were IO errors and the kernel mounted the fs read-only. You can try to reload the device and if logflash will come back up fine after the reload, its a transient issue; if the issue comes back, the logflash device most likely is damaged bad and needs to be replaced. You will need to open a service request with TAC to get it replaced.
    HTH,
    Alex

  • Best method for passing data between nested components

    I have a fairly good sized Flex application (if it was
    stuffed all into one file--which it used to be--it would be about
    3-4k lines of code). I have since started breaking it up into
    components and abstracting logic to make it easier to write,
    manage, and develop.
    The biggest thing that I'm running into is figuring out a way
    to pass data between components. Now, I know how to write and use
    custom events, so that you dispatch events up the chain of
    components, but it seems like that only works one way (bottom-up).
    I also know how to make public variables/functions inside the
    component and then the caller can just assign that variable or call
    that function.
    Let's say that I have the following chain of components:
    Component A
    --Component B
    -- -- Component C
    -- -- -- Component D
    What is the best way to pass data between A and D (in both
    directions)?
    If I use an event to pass from D to A, it seems as though I
    have to write event code in each of the components and do the
    bubbling up manually. What I'm really stuck on though, is how to
    get data from A to D.
    I have a remote object in Component A that goes out and gets
    some data from the server, and most all of the other components all
    rely on whatever was returned -- so what is the best way to be able
    to "share" data between all components? I don't want to have to
    pass a variable through B and C just so that D can get it, but I
    also don't want to make D go and request the information itself. B
    and C might not need the data, so it seems stupid to have to make
    it be aware of it.
    Any ideas? I hope that my explanation is clear enough...
    Thanks.
    -Jake

    Peter (or anyone else)...
    To take this example to the next (albeit parallel) level, how
    would you go about creating a class that will let you just
    capture/dispatch local data changes? Following along my original
    example (Components A-D),let's say that we have this component
    architecture:
    Component A
    --Component B
    -- -- Component C
    -- -- -- Component D
    -- -- Component E
    -- -- Comonnent F
    How would we go about creating a dispatch scheme for getting
    data between Component C and E/F? Maybe in Component C the user
    picks a username from a combo box. That selection will drive some
    changes in Component E (like triggering a new screen to appear
    based on the user). There are no remote methods at play with this
    example, just a simple update of a username that's all contained
    within the Flex app.
    I tried mimicking the technique that we used for the
    RemoteObject methods, but things are a bit different this time
    around because we're not making a trip to the server. I just want
    to be able to register Component E to listen for an event that
    would indicate that some data has changed.
    Now, once again, I know that I can bubble that information up
    to A and then back down to E, but that's sloppy... There has to be
    a similar approach to broadcasting events across the entire
    application, right?
    Here's what I started to come up with so far:
    [Event(name="selectUsername", type="CustomEvent")]
    public class LocalData extends EventDispatcher
    private static var _self:LocalData;
    // Constructor
    public function LocalData() {
    // ?? does anything go here ??
    // Returns the singleton instance of this class.
    public static function getInstance():LocalData {
    if( _self == null ) {
    _self = new LocalData();
    return _self;
    // public method that can be called to dispatch the event.
    public static function selectUsername(userObj:Object):void {
    dispatchEvent(new CustomEvent(userObj, "selectUsername"));
    Then, in the component that wants to dispatch the event, we
    do this:
    LocalData.selectUsername([some object]);
    And in the component that wants to listen for the event:
    LocalData.getInstance().addEventListener("selectUsername",
    selectUsername_Result);
    public function selectUsername_Result(e:CustomEvent):void {
    // handle results here
    The problem with this is that when I go to compile it, it
    doesn't like my use of "dispatchEvent" inside that public static
    method. Tells me, "Call to possibly undefined method
    "dispatchEvent". Huh? Why would it be undefined?
    Does it make sense with where I'm going?
    Any help is greatly appreciated.
    Thanks!
    -Jacob

  • Reg:Efficient solution for a data upload scenario

    Hi All,
            I have the following task.
             Required  data from a legacy system(generate  data only in the form of flat files)to SAP R3 as FB01 journals and the output file should be generated periodically(daily,weekly,fortnightly etc…)
    Solution Approaches:
    1)Write a BDC program to extract the data.
    2) Write a ABAP Progam to populate IDoc (if standard IDOc is available) or generate a Outbound proxy (If standard IDoc is not available) to push the data into SAP XI.
    Could anyone  tell me which would be the the best and efficient approach for this task and need your recommendations.
    Thanks in Advance.
    B.Lavanya
    Edited by: Lavanya Balanandham on Mar 31, 2008 2:23 PM

    Hi Lavanya,
    Required data from a legacy system(generate data only in the form of flat files)to SAP R3 as FB01 journals - use BDC for this thing because it will be better for large source files.
    the output file should be generated periodically(daily,weekly,fortnightly etc…)  - if this output file contains acknowledgment for the data uploaded by the above process, create a ABAP report for it and schedule it..........but if this output contains some other IDOC data which you need to send as a file to a third-party system, then go for SAP XI provided the IDOC data is not too large... but if the IDOC size is huge, then just create a ABAP report for outputting data to a file on application server and FTP the file to third-party system.
    Regards,
    Rajeev Gupta

  • Generic delta for master data

    Hi All,
    I am trying to create a generic delta for master data "equipment"  . table in SASP is "EQUI". I am choosing ALE delta . in that I have to provide table name and "changed doc object' . when I give "equi" as table name and "aedat" (changed on ) as "changed doc object' -
    it is throwing error.
    also when I  tried  for time satmp /calday delta , the delta doesnot work when changeed are done. don't know why?
    Any idea what has to be given in these fields.
    Regards,
    Dola
    Edited by: Dola das on Mar 17, 2010 12:55 PM

    Hello,
    TCDOB is a table where you need to maintain entries for Generic Detla.
    Please goto SE16 : enter table name TCDOB
    In the selection Screen Enter Object as EQUI and check the Number Of Entries..
    I guess you need to maintain the number of fields on which the change is dependent for Detla ()
    I treid creating the same Datasource Using Ale Detla
    It worked and saved without errors :
    i have the following entries in TCDOB table
    OBJECT          TABNAME
    EQUI            EQKT
    EQUI            EQUI
    EQUI            EQUZ
    EQUI            FLEET
    EQUI            ILOA
    Please tell me your count and entries..
    so that we can discuss this Further
    Also if you find if there are no entries then you can Go to SCDO tcode and maintain entries with respect to change object.
    waiting for your feedback
    Regards
    Nitin Bhatia
    Edited by: Nitin Bhatia on Mar 18, 2010 6:44 AM

  • IP mobility solution for a Data Centers

    Hello guys
    Please give me an advice.
    Now I try to work out a networking solution for a two geo separated data centers (DCs).
    Both the data centers will contain a virtualised server infrastructure (VMware).
    Now the main design problem is to choose good solution for IP mobility and  for the DCs interconnect. We need to have an ability of moving a VM machines both for maintanance and for disaster recovery between the DCs. And users must seamlessly without any advanced knowledge about routing  be connected to the VM machines that were moved. For now the users work in 1100 different offices around the Ukraine country.
    Yes I know a little about Cisco OTV, RHI and LISP solutions. But all this solutions require the top level switches and routers like Nexus 7000 and Cat 6500. And they are very costly.
    Is there cheaper solution for the IP Mobility?
    Maybe the NHRP protocol that is a part of the DMVPN could be a good solution? 
    Are there any features in NHRP or in other protocol for monitoring the health of a VM machine, customising and propagation the routing info in case of VM machine motion?
    Thank you for help.

    Hi Lavanya,
    Required data from a legacy system(generate data only in the form of flat files)to SAP R3 as FB01 journals - use BDC for this thing because it will be better for large source files.
    the output file should be generated periodically(daily,weekly,fortnightly etc…)  - if this output file contains acknowledgment for the data uploaded by the above process, create a ABAP report for it and schedule it..........but if this output contains some other IDOC data which you need to send as a file to a third-party system, then go for SAP XI provided the IDOC data is not too large... but if the IDOC size is huge, then just create a ABAP report for outputting data to a file on application server and FTP the file to third-party system.
    Regards,
    Rajeev Gupta

  • Workday calculation for specified date range

    Hi All,
    How to count number of workdays available for given date range. And I tried below statement which is
    not working.
    SUM(CASE [Calendar].[Calendar Date]
        WHEN [Calendar].[Calendar Date].[Year] = '2005' AND [Calendar].[Calendar Date].[Month]
    = 1
        THEN [Calendar].[Calendar Date].CURRENTMEMBER.CHILDREN
        END
    , [Measures].[Work Day Flag])

    Hi bpbhhaskar,
    According to your description, you want to count the weekdays in MDX. Right?
    In this scenario, we can just aggregation days from Monday to Friday. The key should be 2 to 6. Please use the expression below:
    with
    MEMBER [Measures].[DayCount] AS
    Count
    Descendants
    [Date].[Calender].CurrentMember
    ,[Date].[Calender].[Date]
    * {[Date].[Day Of Week].&[2]:[Date].[Day Of Week].&[6]}
    Best Regards,
    Simon Hou
    TechNet Community Support

  • Creating process for multiple Date fields for update or insert in APEX

    hello there,
    could someone please help me?
    i have a form on Apex based on view that is based on three tables and updating and inserting ok using trigger instead of.
    i have a problem now as in my form i have around 75 fileds (items) incuding 30 or more date fields which could be populated or left blank or update later.
    so for each date field i have two boxs; one for date, input as dd/mm/yyyy (text field) and second for time, input as 23:45. All dates will be insert or update manually by user. so as i mentioned not all date fields could be poulated at one stage.
    so i have created some process and validations and all of them work fine but i came accross if date left blank then (:) giving me problem so i have done following further process for each date field. In real table all the date fields have data type date.
    declare
    v_my_var date; -- for first date field
    str_dy VARCHAR2(10);
    dt_indx date;
    str_tm VARCHAR2(20);
    tm_indx date;
    begin
    str_dy := :p4_first_date
    str_tm := str_dy||' '||substr(:p8_first_date_hh,1,2)||':'||substr(:p8_first_date_HH,4,2);
    dt_indx := to_date(str_tm,'DD/MM/YYYY HH24:MI');
    IF str_dy is not null then
    v_my_var :=dt_indx;
    ELSE
    v_my_var := NULL;
    END IF;
    update table 1 set my_date = v_my_var where d_id= :p4_d_id;
    end;
    above code work fine but one date field of course therefore i have to do same code for each date field with changes and initialise variable again and again for each field.
    so i like to ask is there any easy way that is more professional. i was thinking about the procedure and using collection or similar but honestly not much experience on that so could some one please help me?
    I will be very thankful.
    KRgds

    Hi,
    You can do the needful by re-using the code if you can give the item names as P8_DATE1, P8_DATE_hh1, P8_DATE2, P8_DATEhh2 etc..So your item name just differs by a sequence.
    Now you write function which will return desired date value taking above items as input. Pass item names to this function, get session state using APEX_UTIL.GET_SESSION_STATE('item_name') API.
    Now modify you code as
    FOR i IN 1..30
    LOOP
    v_date_array[i] = f_get_date('P8_DATE'||i, 'P8_DATEhh'||i);
    END LOOP;
    ....Now you have all date valus in array. Just write one update as follows
    UPDATE  TABLE1
    SET date1 = my_date_array[1], date2 = my_date_array[2]..
    WHERE ....Hope it helps :)
    Cheers,
    Hari

Maybe you are looking for

  • External monitor slowing down my MacBook pro

    I recently hooked up a brand new external Acer G205HV monitor to my 15" MacBook Pro (4gb RAM) using the mini display port to DVI adapter from Apple. I have an GeForce 9400M graphics card with 256mb ram. Whenever I have the monitor plugged in it slows

  • Two way SSL issue in weblogic

    Hi All, we have enabled 2 way SSL in weblogic, we have one Admin Server and one managed (soa) server version 11.1.1.5 steps we have followed: we have imported identity certificate and key file to a custom identity store improted trust certificates to

  • Deleteing element by element in 2D array

    Is there away to delete element by element in 2D array without changing the dimensions to 1D array. I want to select the first 20 element reading across the rows. For example, If I have 2D array with 6 element in each raw. I want to select the first

  • Font size issues..

    for example 8pt doesn't look like 8pt, how do I fix this problem?

  • Is there an Outlook 2010 vs IPhone4 problem?

    I use Outlook 2010 during the day for my work email.  When it is not open my email goes to my phone and then in the mornings everything gets downloaded into Outlook and deleted from my Phone which is fine with me.  The problem I am having the last fe