Creating a Bank Group

Hi All,
where can I create a Bank Group in the customizing of SAP?
Thanks
Gandalf

Hi,
I think it's a free-entry attribute of a bank (FI01).
Regards,
Eli

Similar Messages

Could I use Bank Groups (BNKA-BGRUP) for Money transfer to pay vendors?

Hi All,
with reference to the money transfer to pay vendors,
I'd like to know if, using Bank Groups, in F110 SAP can suggest me to use the House bank which,in BNKA, has the same Bank Groups of the vendor partner bank.
Thaks for Your advices.
Gandalf

Hi,
As far my understanding of your question, you are asking whether by grouping the bank of ours with the vendor bank, so that in F110 it can be picked? If the same is what you are expecting, then it is wrong.
See, our house bank details are entered in table BNKA which will be created by t.Code: FI12.
Where as vendor bank details are directly updated in vendor master and in table LFBK it is updated.
So, you cant link between these.
hope i am correct
regards
srikanth

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights. Below is the EventViewer log for the user creation:
User Account Created:
 New Account Name: username
 New Domain: PCNAME
 New Account ID: PCNAME\username
 Caller User Name: PCNAME$
 Caller Domain: DOMAINNAME
 Caller Logon ID: (0x0,0x3E7)
 Privileges -
Attributes:
 Sam Account Name: username
 Display Name: <value not set>
 User Principal Name: -
 Home Directory: <value not set>
 Home Drive: <value not set>
 Script Path: <value not set>
 Profile Path: <value not set>
 User Workstations: <value not set>
 Password Last Set: <never>
 Account Expires: <never>
 Primary Group ID: 513
 AllowedToDelegateTo: -
 Old UAC Value: 0x2DAB2B0
 New UAC Value: 0x2DAB2B0
 User Account Control: -
 User Parameters: <value not set>
 Sid History: -
 Logon Hours: <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID: (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
 User name: DOMAINNAME\PCNAME$
 Auth package: NTLM
 Logon type: (none)
 Session: 0
 Sid: S-1-5-18
 Logon time: 9/11/2014 12:41:53 PM
 Logon server:
 DNS Domain:
 UPN:
 4: System
 316: smss.exe
 364: csrss.exe
 392: winlogon.exe
 440: services.exe
 452: lsass.exe
 628: svchost.exe
 756: LMAgent.exe
 840: svchost.exe
 1000: spoolsv.exe
 1252: avagent.exe
 1268: camWMIAgent.exe
 1324: cissesrv.exe
 1380: cpqrcmc.exe
 1404: vcagent.exe
 1440: svchost.exe
 1480: HsQuotas.exe
 1740: inetinfo.exe
 1780: EmailAgent.exe
 1856: snmp.exe
 1884: sysdown.exe
 1920: smhstart.exe
 2192: svchost.exe
 2388: cmd.exe
 2396: hpsmhd.exe
 2444: cqmgserv.exe
 2464: cqmgstor.exe
 2484: HSphere.exe
 2596: wmiprvse.exe
 2676: cmd.exe
 2684: rotatelogs.exe
 2692: cmd.exe
 2700: rotatelogs.exe
 2732: searchindexer.exe
 2812: hpsmhd.exe
 2824: cqmghost.exe
 2852: svchost.exe
 3044: cmd.exe
 3052: rotatelogs.exe
 3080: cmd.exe
 3088: rotatelogs.exe
 5452: svchost.exe
 5596: GravitixService.exe
 7392: csrss.exe
 7232: winlogon.exe
 6888: csrss.exe
 9832: winlogon.exe
 10388: wawrapper.exe
 10352: cpqnimgt.exe
 9496: msiexec.exe
 6068: w3wp.exe
 4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid: S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

Can't create a "simple" group/course - and no upload

Hi all,
I'm quite new to this task of managing iTunesU for my institution (ICTP, www.ictp.it), and we just got admitted to the iTunesU platform since few days, so please bear with my poor experience (but I'm carefully reading the guides provided by Apple).
Now... I've had no problem in creating/editing a few test pages/groups/courses, but I'm not able at all to create a "simple" group course, the edit menu only lead me to the two options: "smart" and "feed". And I cannot find the tool menu item to do the "Upload and Manage Files" (I guess it doesn't appear because there are no simple groups, the only ones that can accept manual uploads, am I right?).
Just to explain better: of course I'll eventually implement a transfer script to upload our videos (I'm working on re-encoding some thousands hours of lectures...), but for now I would like to make some preliminary tests, and upload manually a few videos. What am I doing wrong?
Is it possible that maybe our approval is still pending, and I'm not allowed to upload anything? But I can edit the site (but not publish it).
I tried both interfaces, the iTunes.app native and the web one (the "iTunesU Public Site Management" on phobos.apple.com):
the former is more complete but is missing upload option and "simple" group course creation, while the latter gives me only tools to edit the graphic appearance of the main page (banner, styles, etc...).
thank you for any help, it will be appreciated very much!
Carlo,
Trieste (Italy)

I think I've found the answer by myself in this thread:
https://discussions.apple.com/thread/2018158?threadID=2018158&tstart=0
Unfortunately, it's not the answer I was hoping for... apparently the option to store contents in Apple's servers isn't available anymore for newcomers to iTunesU.
Now I have to manage a way to do local storage and RSS feeds, new challenge!
Hope this may help others,
Carlo.

How do I create an email group on iPad 2?

How do I create an email group from email or contacts to send emails to groups of like contacts

It's a comma (or semicolon) rather than a decimal point, if you're doing it manually, but that method does work across iPhone, iPad and iPod touch.
This is actually close to how our "MailShot" app works (unlike most other group email apps) except that MailShot manages the groups for you and makes it easier to delete and add contacts to your groups.
If your groups are small you can try our free version on
http://itunes.apple.com/us/app/mailshot-group-email-done/id410279354?ls=1&mt=8.
There's an upgrade path to the full version if you like it in that app. or you can go straight to the Pro version:
http://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&mt =8
Any problems, get in touch on our support email.
Peter
Soluble Apps
Disclosure: I am the developer of MailShot and MailShot Pro and may benefit from their sales.

How do I create a Public Group on the Calendar Server?

How do I create a Public Group on the Calendar Server?

Anyone can create Private Groups or Member Only Groups. You must be given
administrative rights to create Public Groups on the Calendar Server. The
Calendar Server Admin (SYSOP) can give anyone rights to create Public Groups by
using the uniadmrights tool.

Go to /users/unison/bin/
and run the uniadmrights
tool. Some sample syntax:

To list all users with administrative rights:
% uniadmrights -ls -host yourhostname

To give John Smith, a user on node 10000, rights to administer Public Groups:
% uniadmrights -e "S=Smith/G=John" -add -pgrp -n 10000

In Calendar Server 4.0, you also have the option of using the Admin Server GUI
to assign Administrative
rights (instead of using the command-line method) by going to User Management,
Administration Rights.

With the proper administrative rights, log into the Calendar Client. Go to Options,
Manage Groups to create a new group. Choose PUBLIC from the dropdown window,
add your users and/or resources and click OK to create the Public Group which
can be seen by all users on the local Calendar Server.

The following is info that I found in another post that I have been trying to follow.
MrHoffman New England
Re: Configure DNS - OS X Server Next Steps
Feb 13, 2011 6:36 AM (in response to Jimbooooooo)
You're setting up internal DNS services, you referenced your ISP DNS servers and you should not have, and now those servers have no translations for your hosts. This is a common misconfiguration.
See [configuring DNS on Mac OS X Server|http://labs.hoffmanlabs.com/node/1436] for how to set up your internal DNS server.
And if there are any references to your ISP DNS servers here (within your client settings, within your server settings, your Airport settings, etc), then you're usually going to have DNS and connectivity problems. You're running a server now, so you'll be running your own services, and (particularly because of NAT here) referencing only your own DNS server(s).
You may be setting up external DNS (if and when you need that), but that should happen after you set up your internal DNS. The above article has a link to setting up external DNS, when you get around to that, if/when you need in-bound connections into your LAN.

In Address Book, how do you create a new group under "On my Mac", not under "iCloud"?

In Address Book there are groups under "On my Mac" and groups under "iCloud". When I do File -> "Create new group", the new group always goes under "iCloud". How can I make a new group to go under "On my Mac". I also tried dragging the new group from the iCloud area to the "On my Mac" area, but that doesn't do it. Address Book is version 6.1.3. Thanks for your help.

Maybe look in the Preferences > Accounts & disable the iCloud account? That should force it to create a local group then re-enable the iCloud account. I would use the 'File > Export… Addressbook archive' to make a backup before you begin, but it should be fine.
I'm not sure 10.6.8 supported iCloud natively, so perhaps that is why it is being wierd?

How do I create a contact group mail on iPad?

I would like to create groups from my contact list - when I go into my contact list, on the top left is in blue 'Groups' then 'All Contacts' in black, then '+' in blue - when I click on groups it shows in grey ICLOUD and below 'All Contacts' - over to the right is a blank contact sheet with 'Edit' in blue on the top right - when I tap edit it allows a contact to be added but no way to create a new group - I want to create a new group - info appreciaged - thx - Karen

You cannot create a new group on your iPad without using an app to do so (such as Speed Names). However, you can easily create a group by going to icloud.com from your computer. Open your contacts on icloud.com, tap "+" on the bottom of the left sidebar and select New Group. Give the group a name, then drag and drop the contacts you want to belong to the group on to the group name. The new group will apear on your iOS device.

Creating a target group based on the BP email address only in CRM

Hi there,
I am currently trying to create a target group based on the business partner email address only.
I have a list of over 1000 email addresses - these email addresses equate to a BP in our CRM system, however I do not have a list of the equivalent business partner numbers, all I have to work on are the email addresses. With these 1000 BP email addresses I need to update the marketing attributes of each of these 1000 BP records in CRM.
What I need is a method to find the 1000 BP numbers based on the email addresses and then use the marketing expert tool (tx. CRMD_MKT_TOOLS) to change the marketing attributes on all of the 1000 BPs.
The issue I am having is how can I find the list of BP numbers just based on the BP email address, I tried creating an infoset based on table BUT000, BUT020 and ADR6 but I after creating attribute list & data source for this I am stuck on what to do next. In the attribute list the selection criteria does not allow me to import a file for the selection range. I can only enter a value but I have 1000 email addresses and cannot possibly email them manually in the filter for the attribute list. I also looked at imported a file into the target group but I do not have any BP numbers so this will not work.
Does anyone know a method where I can create a target group based on the email addresses only without having to do any code?
Any help would be most appreciated.
Kind regard
JoJo

Hi JoJo ,
The below report will return you BP GUID from emails that is stored in a single column .xls file and assign the BP to a target group.
REPORT zexcel.
* G L O B A L D A T A D E C L A R A T I O N
TYPE-POOLS : ole2.
TYPES : BEGIN OF typ_xl_line,
email TYPE ad_smtpadr,
END OF typ_xl_line.
TYPES : typ_xl_tab TYPE TABLE OF typ_xl_line.
DATA : t_data TYPE typ_xl_tab,
 lt_bu_guid TYPE TABLE OF bu_partner_guid,
 ls_bu_guid TYPE bu_partner_guid,
 lt_guids TYPE TABLE OF bapi1185_bp,
 ls_guids TYPE bapi1185_bp,
 lt_return TYPE bapiret2_t.
* S E L E C T I O N S C R E E N L A Y O U T
PARAMETERS : p_xfile TYPE localfile,
 p_tgguid TYPE bapi1185_key .
* E V E N T - A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xfile.
 CALL FUNCTION 'WS_FILENAME_GET'
 IMPORTING
 filename = p_xfile
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
 IF sy-subrc <> 0.
 CLEAR p_xfile.
 ENDIF.
* E V E N T - S T A R T O F S E L E C T I O N
START-OF-SELECTION.
* Get data from Excel File
 PERFORM sub_import_from_excel USING p_xfile
 CHANGING t_data.
 SELECT but000~partner_guid FROM but000 INNER JOIN but020 ON
but000~partner =
 but020~partner
 INNER JOIN adr6 ON but020~addrnumber = adr6~addrnumber INTO TABLE
lt_bu_guid FOR ALL ENTRIES IN t_data WHERE adr6~smtp_addr =
t_data-email.
 CLEAR: lt_guids,ls_guids.
 LOOP AT lt_bu_guid INTO ls_bu_guid.
 ls_guids-bupartnerguid = ls_bu_guid.
 APPEND ls_guids TO lt_guids.
 ENDLOOP.
 CALL FUNCTION 'BAPI_TARGETGROUP_ADD_BP'
 EXPORTING
 targetgroupguid = p_tgguid
 TABLES
 return = lt_return
 businesspartner = lt_guids.
*& Form SUB_IMPORT_FROM_EXCEL
* text
* -->U_FILE text
* -->C_DATA text
FORM sub_import_from_excel USING u_file TYPE localfile
CHANGING c_data TYPE typ_xl_tab.
 CONSTANTS : const_max_row TYPE sy-index VALUE '65536'.
 DATA : l_dummy TYPE typ_xl_line,
 cnt_cols TYPE i.
 DATA : h_excel TYPE ole2_object,
 h_wrkbk TYPE ole2_object,
 h_cell TYPE ole2_object.
 DATA : l_row TYPE sy-index,
 l_col TYPE sy-index,
 l_value TYPE string.
 FIELD-SYMBOLS : <fs_dummy> TYPE ANY.
* Count the number of columns in the internal table.
 DO.
 ASSIGN COMPONENT sy-index OF STRUCTURE l_dummy TO <fs_dummy>.
 IF sy-subrc EQ 0.
 cnt_cols = sy-index.
 ELSE.
 EXIT.
 ENDIF.
 ENDDO.
* Create Excel Application.
 CREATE OBJECT h_excel 'Excel.Application'.
 CHECK sy-subrc EQ 0.
* Get the Workbook object.
 CALL METHOD OF h_excel 'Workbooks' = h_wrkbk.
 CHECK sy-subrc EQ 0.
* Open the Workbook specified in the filepath.
 CALL METHOD OF h_wrkbk 'Open' EXPORTING #1 = u_file.
 CHECK sy-subrc EQ 0.
* For all the rows - Max upto 65536.
 DO const_max_row TIMES.
 CLEAR l_dummy.
 l_row = l_row + 1.
* For all columns in the Internal table.
 CLEAR l_col.
 DO cnt_cols TIMES.
 l_col = l_col + 1.
* Get the corresponding Cell Object.
 CALL METHOD OF h_excel 'Cells' = h_cell
 EXPORTING #1 = l_row
 #2 = l_col.
 CHECK sy-subrc EQ 0.
* Get the value of the Cell.
 CLEAR l_value.
 GET PROPERTY OF h_cell 'Value' = l_value.
 CHECK sy-subrc EQ 0.
* Value Assigned ? pass to internal table.
 CHECK NOT l_value IS INITIAL.
 ASSIGN COMPONENT l_col OF STRUCTURE l_dummy TO <fs_dummy>.
 <fs_dummy> = l_value.
 ENDDO.
* Check if we have the Work Area populated.
 IF NOT l_dummy IS INITIAL.
 APPEND l_dummy TO c_data.
 ELSE.
 EXIT.
 ENDIF.
 ENDDO.
* Now Free all handles.
 FREE OBJECT h_cell.
 FREE OBJECT h_wrkbk.
 FREE OBJECT h_excel.
ENDFORM. " SUB_IMPORT_FROM_EXCEL
Just copy paste the code and run the report select any local xls file with emails and pass the target group guid.
snap shot of excel file:
Let me know if it was useful.

Creating a new group in LDAP using JLDAP

Can anybody tell me how to creat a new group in LDAP using JLDAP

Hi,
Have a look at the following link. It will surely help you.
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm</a>
Please reward points if it helps.
Regards,
Amit Mishra

Creating a new group in Mail

Is there an easy way to create a new group in mail (or I guess it's really the Address book) from an email I already sent to a group of people. I don't want to copy each name one by one if it's not necessary. Thanks, Jack

Each email address in the group is put in the To: field automatically when you put them all in the BCC field when composing the email. Nobody sees anything except their own email address.
I think you are mistaken there, Golden. If the To: field is blank the recipients in the Bcc field will see the To: as undisclosed-recipients - if they get anything at all; some ISPs will reject a message with a blank To:. I would agree with putting the target recipients in the Bcc, but when doing this I usually put my own address in the To: field.
AK

Create a new group in Active Directory ?

Hello,
I'd like to create a new group in Active Directory. Can somebody show me a sample code please ?
Thanks.

Someone should show you how to perform a search. There's a sample in this forum.
http://forums.sun.com/thread.jspa?threadID=623860

Create a new Grouping in IBY_FD_EXTRACT_EXT_PUB

Hi,
I need to create a new group in IBY_FD_EXTRACT_EXT_PUB like below.
eg:
+*<OutboundPaymentInstruction>*+
---+
+*<OutboundPayment>*+
---+
+*<ExtendValue>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 1</OUTPUTVALUE>+
+*</Extend>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 2</OUTPUTVALUE>+
+*</Extend>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 3</OUTPUTVALUE>+
+*</Extend>*+
*</ExtendValue*
+*<OutboundPayment>*+
---+
+*<ExtendValue>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 1</OUTPUTVALUE>+
+*</Extend>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 2</OUTPUTVALUE>+
+*</Extend>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 3</OUTPUTVALUE>+
+*</Extend>*+
+*</ExtendValue>*+
I have got the Concatenated value inside a loop, but I need to split each of the values into 80 characters and then insert it into <OUTPUTVALUE>+
So, if I have 240 characters, then I need it like+
+*<OutboundPayment>*+
---+
+*<ExtendValue>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 80 characters*</OUTPUTVALUE>*+
+*</Extend>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 80 characters*</OUTPUTVALUE>*+
+*</Extend>*+
-- <Extend>+
---<OUTPUTVALUE>Concatenated Value - 80 characters*</OUTPUTVALUE>*+
+*</Extend>*+
+*</ExtendValue>*+
What I have tried is
FUNCTION Get_Pmt_Ext_Agg(p_payment_id IN NUMBER)
RETURN XMLTYPE
IS
l_ins_ext_agg XMLTYPE;
CURSOR get_invoices_cur(cp_payment_id in number) is
SELECT IDP.document_payable_id DOCUMENT_PAYABLE_ID
,SUBSTR(IDP.calling_app_doc_ref_number,1,30) REFERENCE_NUMBER
,IDP.payment_amount PAYMENT_AMOUNT
,IDP.document_amount DOCUMENT_AMOUNT
,IDP.payment_curr_discount_taken DISCOUNT_AMOUNT
,SUBSTR(IDP.po_number,1,30) PO_NUMBER
,IPA.payment_amount PAYMENT_AMNT
,IPA.ext_branch_number EXT_BRANCH_NUMBER
,IPA.ext_bank_account_number EXT_BANK_ACCOUNT_NUMBER
,IPA.payee_name PAYEE_NAME
,IPA.int_bank_name INT_BANK_NAME
,IPA.payment_reference_number PAYMENT_REFERENCE_NUMBER
,IPA.creation_date CREATION_DATE
,IPA.payment_instruction_id PAYMENT_INSTRUCTION_ID
FROM iby_docs_payable_all IDP
,ap_invoices_all AIA
,iby_payments_all IPA
WHERE AIA.invoice_id = idp.calling_app_doc_unique_ref2
AND IPA.payment_id = IDP.payment_id
AND IDP.payment_id = cp_payment_id;
BEGIN
<Initialize all valiables>
FOR get_invoices_rec IN get_invoices_cur(p_payment_id)
LOOP
lc_concatenate: = <Get the concanated Value as required>;
lc_split:= < Written some logic to split it into char >
BEGIN
SELECT XMLConcat(
XMLElement("Extend",
XMLElement("lc_value1" lc_split))
INTO lc_extendval
FROM dual
END;
END LOOP;
BEGIN
SELECT XMLConcat(
XMLElement("ExtendVal",lc_extendval),
INTO l_ins_ext_agg
FROM dual;
END;
RETURN l_ins_ext_agg;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END Get_Pmt_Ext_Agg;
Now, my output comes only as the last 80 characters, I do not have the first 80 and second 80 characters.
ANy inputs to achieve all the 240 characters split into 3 rows like described above would be helpful.
Thanks

>
Now, my output comes only as the last 80 characters, I do not have the first 80 and second 80 characters.
>
based on
>
lc_split:= < Written some logic to split it into char >
>
so check logic for splitting
i can't test on your data but
>
SELECT XMLConcat(
XMLElement("Extend",
XMLElement("lc_value1" lc_split))
INTO lc_extendval
FROM dual
>
what's code doing?
looks like it's wrong because it create tag "lc_value1"
>
BEGIN
SELECT XMLConcat(
XMLElement("ExtendVal",lc_extendval),
INTO l_ins_ext_agg
FROM dual;
END;
RETURN l_ins_ext_agg;
>
what's code doing?
so try another way
FUNCTION Get_Pmt_Ext_Agg(p_payment_id IN NUMBER)
RETURN XMLTYPE
IS
l_ins_ext_agg XMLTYPE;
CURSOR get_invoices_cur(cp_payment_id in number) is
SELECT IDP.document_payable_id DOCUMENT_PAYABLE_ID
,SUBSTR(IDP.calling_app_doc_ref_number,1,30) REFERENCE_NUMBER
,IDP.payment_amount PAYMENT_AMOUNT
,IDP.document_amount DOCUMENT_AMOUNT
,IDP.payment_curr_discount_taken DISCOUNT_AMOUNT
,SUBSTR(IDP.po_number,1,30) PO_NUMBER
,IPA.payment_amount PAYMENT_AMNT
,IPA.ext_branch_number EXT_BRANCH_NUMBER
,IPA.ext_bank_account_number EXT_BANK_ACCOUNT_NUMBER
,IPA.payee_name PAYEE_NAME
,IPA.int_bank_name INT_BANK_NAME
,IPA.payment_reference_number PAYMENT_REFERENCE_NUMBER
,IPA.creation_date CREATION_DATE
,IPA.payment_instruction_id PAYMENT_INSTRUCTION_ID
FROM iby_docs_payable_all IDP
,ap_invoices_all AIA
,iby_payments_all IPA
WHERE AIA.invoice_id = idp.calling_app_doc_unique_ref2
AND IPA.payment_id = IDP.payment_id
AND IDP.payment_id = cp_payment_id;
BEGIN
<Initialize all valiables>
FOR get_invoices_rec IN get_invoices_cur(p_payment_id)
LOOP
lc_concatenate: = <Get the concanated Value as required>;and add logic for splitting like
select xmlelement("ExtendValue", xmlagg(xmlelement("Extend", substr(lc_concatenate,1+80*(level-1),80) )))
INTO lc_extendval
from dual
connect by level <= ceil(length(lc_concatenate)/80)so example
SQL>
SQL> with t as
2 (
3 select 1 id, lpad('a',80,'a') ||lpad('b',80,'b') ||lpad('c',80,'c') str from dual
4 )
5 --
6 select xmlelement("ExtendValue", xmlagg(xmlelement("Extend", substr(str,1+80*(level-1),80) )))
7 from t
8 connect by level <= ceil(length(str)/80)
9 /
XMLELEMENT("EXTENDVALUE",XMLAG
<ExtendValue><Extend>aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
SQL> if you have some problem then plz post test data

Create a new group in Messaging

How do you create a new group in messaging, I had to select ios4.33 in the Operating system as ios5 is not available yet

Someone should show you how to perform a search. There's a sample in this forum.
http://forums.sun.com/thread.jspa?threadID=623860

Error While creating a Product Group

Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.

Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram

Creating a Bank Group

Similar Messages

Maybe you are looking for