Creating a Blu-Ray disc:

Hello,
I tried to create a blu-ray disc witj Fonal Cut Pro 7 (menu Share) and with Final Cut Pro X Trial (menu Share), but both the times after a certain period of processing (about an and a half) an error message appears, QuickTime Error:0
Has anyone experienced such a problem, I can't burn a Blu-Ray disc with my bramd new HD drive and it seems that Final Cut Pro has a problem? Before buying Final Cut Pro X ...
Thank you in advance
Claudio Tagnin
[email protected]

it's just copying files to it, not video. If you put a blank blu-ray disk in the drive, it may show up in the finder. A program like Toast can burn a blu-ray.
http://www.roxio.com/enu/products/toast/titanium/overview.html

Similar Messages

How to create a blu-ray disc with multiple source files

Hello,
How is it possible to create a blu-ray disc, AVCHD recordable DVD with multiple source files from Final Cut Pro 10. Is it possible to create a menu with several chapters corresponding to the sequences (source files)?
Thank you in advance for your support.

Assume you're talking about using the Create Blu-Ray batch template. It's not possible to do with multiple source filles. But if I understand your objectives, you could pretty much get what you think want – discrete movie segments on a single disk with navigation.
The way I'd approach it is by making multiple projects in FCP and then copying the finished versions into a new project, separated by gaps. (You could also use compound clips but I'm not a fan except for very short sequences, which is why I'm suggesting the copy route.) Then export and bring into Compressor.
In Compressor mark your chapters at the gaps between your individual sequences. Then choose the AVCHD option in job actions.
Bear in mind that you'll have to keep the recording time under roughly 30-35 minutes @a5 Mbts/sec
Good luck.
Russ

Problems Creating a Blu-ray Disc with a Main (Static) Menu and Pop-up Menus

I'm having problems creating a simple Blu-ray disc containing a Main Menu (Static Menu with a graphic for my background) and a single Pop-up menu assigned to all of my timelines. I wouldn't think this would be so hard to create but every attempt I've made ends up with the navigation getting all messed up to the point that my Playstation 3 doesn't even recognize that the disc as being Blu-rey disc.
I want a simply static Main menu containing a "Play all" Button, and a button for each additional timelines. Im also using the override commands on my buttons so if someone just chooses to see one specific clip from the main menu, they will be taken back to the main Menu after their selected clip plays. But then I also want a Pop-up menu assigned to the timelines so the viewer can switch to a different clip (timeline) without having to go back to the Main (static) menu.
My Blu-ray Disc runs just fine if I only use a static menu in a project, or if I only use a single Pop-up menu assigned to each timeline, but not both a Static Main menu, and pop-up menus. I'm using CS4
Thanks.

it's just copying files to it, not video. If you put a blank blu-ray disk in the drive, it may show up in the finder. A program like Toast can burn a blu-ray.
http://www.roxio.com/enu/products/toast/titanium/overview.html

Final Cut Pro 7: problem creating Blu Ray disc

Hello, I've a problem using FInal Cut Pro 7. I want to create a Blu Ray disc using the "Share" function, but during the process - after many hours - appears this warning message: "SHARE WARNING - NSEXPETION RAISED BY 'NSPORT TIMEOUT EXCEPTION' REASON = CONNECTION TIMEOUT: DID NOT RECEIVE REPLY". Someone can help me? What does it mean? Thanks! P.S. Duration of my film (in the timeline): 35 minutes.

Yes. It will only burn Blu-Ray if it is the Pro version though.
Compressor will also burn the Blu-Ray if you set it up to do so:
http://documentation.apple.com/en/compressor/usermanual/index.html#chapter=25%26 section=3%26tasks=true

Importing a Blu-ray Disc that I created

I created a Blu-ray Disc and I lost The master file. How can I import the Blu-ray Disc to be re-edited again?
Thanks
joe

Let me Google that for you.
Be sure to rip into a video format that works well in After Effects: ideally, an intermediate codec like Quicktime PNG or Animation, Quicktime ProRes, Uncompressed AVI etc.

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

How do I create Blu Ray Disc with DVD Studio Pro ?

Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
5-) Now I got a HVDVD_TS folder, with my movie compilation...
NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
thanks a lot for any help.
Best Regards
Marcelo

That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
Get the original source back and go the toast route from the start.
Message was edited by: Eric Pautsch1

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

Creating Blue-ray disc - H.264 Codec?

Hi, I know I can use MPEG-2 for Blue-Ray. Is it possible to use H.264 Codec for Blue-Ray in Compressor? (it should be much more efficient then the MPEG)... How can I make it work?

How long is your video?
I have made Blu-Ray discs using Compressor and the latest Toast Titanium on standard DVD discs.
In compressor just encode your video using the HD DVD codec supplied.
Then, using toast select Blu-Ray disc (if you have a Blu-Ray burner) or select Blu-Ray on DVD (this will create a bluray disc on a standard DVDR although you will be limited to around 30mins)
I have done this succesfully a few times and played back using PS3 with no problems.

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output?

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?

wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here!

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

Creating Blu ray disc using FCP

I'm curious to know how people are creating a data file for a Blu Ray Disc that use FCP? i.e Toast w/ a third party burner.
Thanks

Will you be using Encore or Toast to encode the video file?
In either you should start a video file exported as self contained current settings from FCP, and encode that to either h.264 blu ray mpeg2 HD in the settings of either Encore or Toast.
What are your sequence settings in FCP?

Fcp 7 project through compressor 3.5 or share re: creating blu ray disc

Am I missing something but it seems you can't send a fcp project to compressor 3.5 via the "send to" option as there isn't any appropriate settings for blu ray, only HD DVD.
But you can through the share option. Is that the case or am I just getting too old for all this new high tech stuff??
"Roger Retired"

Hi iamfrustrated
I'll have to tell you I don't have much experience with compressor, I've been using Episode to transcode my DVD files and Encore to author my DVD's and I am just getting started with burning Blu-ray. But I would think you could simply burn a Blu-ray disc image to your hard drive from within compressor and then even use toast if you want to turn make additional copies. Is that perceivable?
Ron

Instructions: Create Blu-Ray disc in Compressor with Final Cut TImeline

I searched mightily for simple instructions on how to do this. The Compressor help files are woefully inadequate in providing a simple walkthrough to do this. Burning a Blu-ray directly from Final Cut does not allow one to optimize the conversion like compressor does. So:
1) Right click your chosen sequence in Final Cut
2) Click "Share" The Share dialog box will come up.
3) Choose "Blu-Ray" in the destination drop down in the top-left corner of the Share window (don't forget to choose the destination location of the files at the top of the dialog)
4) Click "Send to Compressor" in the bottom-left corner
Compressor will open and a job will automatically be created with Blu-ray video
and Dolby ac3 audio. Set options and submit as usual in Compressor

The send to compressor option occasionally creates problems. Most people would recommend exporting as a self-contained movie, then bringing that into compressor and using your workflow from there.

Best way to copy FCP-created Blu-ray Disc?

Tried using FCP7 to burn another copy of a Blu-ray disc a week after I burned the first copy. But since I didn't want to wait 16 hours for FCP to encode the Blu-ray files again, I copied the files off the first Blu-ray Disc I'd burned onto my desktop. Then, I inserted a blank Blu-ray Disc into my external burner and copied the desktop files onto it.
The new disc burned with those files ... but when I play it back in my Blu-ray player, there's no audio. Any ideas??

Try making a disk image from your original disc, then burning from that.
1. Insert your disc and launch Disk Utility.
2. Select your optical drive in Disk Utility.
3. Choose File > New > Disk Image from<disk name>.
4. Choose DVD/CD Master, press OK, and wait.
5. Select your new image on the left, then press Burn in the toolbar.
Not sure if this process has changed for Blu-ray but I suspect not. The disk format for DVD and Blu-ray is UDF (not FAT32 or HFS+ which you get from a standard Finder burn).

Creating a Blu-Ray disc:

Similar Messages

Maybe you are looking for