Creating a book page from a file created in Illustrator

I created a file in Illustrator and want to make it a page in a book made in InDesign. Is there a certain format that I can export the Illustrator file as to open and edit it in InDesign? Thanks!

I think Kathryn was asking whether an Illustrator file could be placed into a book -- standing as it's own page, not placed in an Indesign file -- and it can't. She may not have phrased it clearly. The explanation "You can place an Illustrator file into Indesign..." would not have cleared that up for her, so I don't blame her for asking again. "You can place an Illustrator file into an Indesign DOCUMENT without exporting anything" would have been more clear.

Similar Messages

How can I remove one page from adobe file

How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?

Tools>Pages>Delete pages

[solved] How to remove specific pages from PDF file?

I'm looking for a way to remove few pages from PDF file.
Last edited by delor (2008-07-04 10:28:22)

To remove first page I did this:
pdftk original.pdf cat 2-end output result.pdf
Any other propositions ?

Insert Pages From another File?

HI Everyone,
Is there a way I can insert entire pages from one file into another?
I'm working on a document and need several pages from another file - is there a way I can import or insert?
Cheers
Darryn

Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

Create web pages from xml files using Servets or JSP

I�m new in this tecnology and I have to create a web pages from information that I get from a XML files. I would like to know if there is a place where I can find examples of code or any book that could help me.

Two places with loads of information on this:
http://xml.apache.org
Look at Xalan or Cocoon.
Also, there was an article on http://www.javaworld.com on XML with JSP.

Extracting pages from PDF file and creating new subfile PDF

I am a .NET C# developer looking into creating an app that extracts a subset of pages from a PDF document, say, given a start and end page number, and possibly creating a new PDF file with that subset of pages. Is there a convenient way of doing this ?

Ok. The Acrobat SDK is not directly going to help, because the Acrobat SDK requires Acrobat, and Acrobat is not for server use.
Adobe have the Adobe PDF Library for server use. C/C++, there may be a Java interface too from DataLogics, but huge overkill for this task, and many find it rather pricy for a simple task like this. There are third party libraries and tools, but this is not the place to discuss them.

How to get total number of pages from .doc file without using Office interop?

Hi,
Kindly help me in getting the total number of pages from a .doc file not .docx file using C#. I know how to get by using Office interop but I do not want to use Office interop.
So, without office automation in C# let me know how to get the total number of pages from a .doc file.
Regards,
Ashok

Hi Ashok,
>> I know how to get by using Office interop but I do not want to use Office interop
Could you tell us why you don't want to use Office interop?
As far as I know, this is the easiest way to achieve.Hmmm,this is my answer
http://msdn.microsoft.com/en-us/library/microsoft.office.interop.word.pagenumbers.startingnumber(v=office.14).aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't e-mail single page from pdf file w multiple pages

wow if this is going to be as hard as getting a screen name.....only adobe
anyway, i have a multiple page document i am scanning.
while scanning i can single out a single page and e-mail it.
when i save and go tot he document later i can not send a single page anymore only the entire document.
is there a way to send a single page from a multiple page document after it is saved as a pdf?
your help is greatly appreciated.

i see.
i have reader 9.
shocking that i would have to pay for a simple feature.
thank you for your help!

How to create a Help page from a file

Hello,
I have a new APEX application and someone made a nice help document using MS Word.
How could I inlcude that file into a Help Page, or some ideas on how this could be seen by the users?
Thanks

Hi,
Apex has a facility whereby you can create a context sensitive help page facility.
see http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/bldapp_hlp.htm#CHDCDBFB
With your help document, save the section relevant to a page as a separate document and save it as a filtered web page. Edit this document in a plain text editor and cut and paste this into the help text for the page.
When you select help from the navigation bar, then this help text will be shown for the current page. To make it even fancier, you can define the link for the navigation bar to show the help page as a popup, so that you don't loose the current context in the application.
Regards
Andre

Changing current page from backing file

Using WL 8.1 SP4
I have a User Acceptance Policy page in my portal, and I want to ensure that users have viewed this page before I allow them to view any other content.
When users have viewed the UAP, I set a session variable. I then use the session variable in my entitlements, so there's no problem with them viewing content they shouldn't.
The problem I have is that if users try to access a page directly (or their session has expired), they're left with a blank page (as they're not entitled to see anything), rather than being sent to something helpful (i.e. the UAP).
So I need a backing file. It can either be on every page (except the UAP), or I can put it on the book - whatever is recommended.
I've tried this as a page backing file:
public class UAPCheck extends AbstractJspBacking {
public boolean handlePostbackData(HttpServletRequest request, HttpServletResponse response){
PageBackingContext pbc = PageBackingContext.getPageBackingContext(request);
if (pbc.getLabel().equals("uap_page")
|| request.getSession().getAttribute("UAP Accepted") != null){
return true;
} else {
pbc.setupPageChangeEvent("uap_page");
return true;
I've applied this to pages in my book, however nothing happens - the page change request never fires!
So what's happening here? Am I misunderstanding what setupPageChangeEvent is for?
Help is appreciated.
darren

In the past I have done it as follows:
1. Create a backing file for the book that has these pages.
2. In the preRender of the backing file do the following
BookBackingContext bbc=
BookBackingContext.getBookBackingContext(getRequest());
if( //check to see if page change event is needed)
{PageBackingContext pbc_current =
        bbc.getActivePageBackingContext();
    pbc_default.setActive(false);
    PageBackingContext pbc_pageToBeShown=
        bbc.getPageBackingContextByDefinitionLabel("//
        def label of page to be shown, in your
        case 'uap_page'");
    pbc_pageToBeShown.setActive(true);
    return true;
else return true;
3. link the backing file to book
Recommendations:
* Don't use backing files for Portal components if they are not needed. (From your post, if I am not wrong, you are using backing files for all pages in the book which is not necessary and can cause unnecessary complications)
* Read this doc to understand life-cycle methods of portal components http://edocs.bea.com/wlp/docs81/pdf/taxonomy.pdf
Peruse the above document to understand what is going wrong with your code.
* Remember that the life cycle methods for components that are not active will not be rendered if treeOptimizationEnable parameter is set to true ( this parameter can be seen in workshop under property editor)
* When calling one of the setupxxevent methods, it must be done on the backing context that the backing file is tied to. If you do not do this the event may not get fired. For more info click http://e-docs.bea.com/wlp/docs81/whitepapers/netix/body.html
Seenu
Seenu.

Importing iPhoto books back from pdf files

I saved my book on a cd in pdf. I want to put it back into iphoto to print more books - iphoto said it couldn't read the format. How do I do this?

sjrb:
You can't back engineer a book from the pdf file. You might however do a Print to PDF and select the Send PDF to iPhoto option. That will give you jpg files for each page of the pdf. You might be able to create a book with all pages in a 1 photo per page layout and use those jpgs of each page. It won't be as good as the original but may be acceptable.
The pdf conversion process produces jpgs that are 2200 x 1700 x 200 dpi which do not give a low quality warning when put a 1 photo/page layout. You'll have trouble with the cover and will have to find the photo for it and redo it with a photo. Worth a try.
If I may offer a suggestion. In the future create a separate library for the book, add the picture you want in the book to an album in the original library. Then use iPhoto Library Manager to transfer that album to the book library and any more photos as you go along. When you're done you can burn that book library folder to a CD using the Finder to archive that book. If you want to order another book at a later day, copy that library folder back to the desktop, open it iPhoto and order another exact copy. Delete the folder when done.
Do you Twango?

How do I maintain spreads after moving pages from one file to another?

I'm consolidating several book chapters into one Indesign file, by way of clicking on the thumbnails on the Pages panel and selecting 'Move Pages...' from the contextual menu.
The problem I'm having is that I can't maintain the page flow between chapters on the destination file, resulting in a broken spread between chapters when exporting to PDF. Here's a screenshot to better illustrate the problem, here seen in between pages 18-19:
I've tried turning on and off the following options on both the source and destination documents but nothing changes:
- Allow Selected Spread To Shuffle
- Allow Document Pages To Shuffle
I've also removed all the sections from the destination document (as you can see on the screenshot, page 19 does not have the little black arrow which denotes a new section), with no luck either.
I also tried dragging the thumbnails manually but to no avail; I just can't figure out how to keep the page spreads between chapters together.
Can anyone help me with this?
Thanks in advance
Mariano

Thank you so much for your reply Peter
I have no idea what those brackets meant, I've followed your recommendation and my problem is fixed now.
Kind regards
Mariano

Adding pages from sequential files

I'm trying to add groups of pages to my PDF. The files are sequentially named by date. When I try and insert them in my document they show up in reverse order. Is there any way to insert them in a different order? I'm using Acrobat Pro 8.1.2 on a MBP 15" 2.4G running 10.5.2

If you go to view> navigation panels> pages, you can drag and drop loose PDF pages in the order you wish. you can also re-arrange existing pages.
It would be nice if the pages would insert in the order they are selected.

Changing Book/Page from within a pageflow

We need to define a pageflow action which has the same effect as the user clicking
on a Book (or Page) tab, i.e. switches to another portlet/pageflow - preferably
at the "begin" action.
That's probably 2 problems:
1) define an action to simulate the user clicking on Book tab
2) define book tabs so that the pageflow state is reset to the begin action
This sounds as though it may be related to howie's <"Reset" pageflow portlet state>
problem.
Just to stop you taking the easy route...
1) can be solved simply by forwarding to /portal/my.portal?_nfpb=true&_pageLabel=book_search
(where book_search is the definition label of the book I want to go to)
I don't like this because:
a) this has hardcoded the portal name, which will be different on the live server
b) it hasn't solved problem 2 because _nfpb=true has maintained the pageflow state
in book_search
2) I can lose pageflow state by removing _nfpb=true (see above), but then I don't
actually arrive at the right page!
Can anyone help?

Try
on (release) {
getURL("
http://site.com/team.html","_self");
}

Officejet 6500 prints 1 blank page from pdf files and nothing else

We just installed this printer. It prints from websites, word, quickbooks just fine. It also successfully copies and faxes. When we try to print from a adobe pdf attachment it prints one blank page and that is all. This also happens when we try to print from googledocs.
Thanks!
Message Edited by laura1982 on 06-05-2009 11:19 AM
Message Edited by laura1982 on 06-05-2009 11:20 AM

I have the same problem with an HP Officejet Pro L7680. Moreover, it now only prints double-sided!

Creating a book page from a file created in Illustrator

Similar Messages

Maybe you are looking for