Creating a bulletin board

Similar Messages

• How to create a Bulletin Board

  Hi Experts,
  I am very New to EP......
  I have a requirement of creating a Bulletin Board.....
  If any body have step by step approach kindly send it to [email protected]
  More points will reward for the useful input.....
  Thanks in Advance,
  Jasmine

  Hello Jasmine,
  you can use XML Forms.
  Test it in KM Folder /documents! Click in the folder context menu "new->forms->SAP Demo News".
  http://help.sap.com/saphelp_nw04/helpdata/en/8e/4470695c686642855af4736da51da0/frameset.htm
  http://help.sap.com/saphelp_nw04/helpdata/en/69/d96b9ba84611d5993600508b6b8b11/frameset.htm
  http://help.sap.com/saphelp_nw04/helpdata/en/8f/fe743c74fa6449e10000000a11402f/frameset.htm
  best regards,
  Michael

• Login and bulletin board

  I am in the process of redesigning our intranet. How hard is
  it to have a login to a part of this site? What I am hoping to do
  is to create a bulletin board for employees, but not everyone would
  see it. There would also be documents posted within this secure
  area. Any help you can give me on creating this login option and
  bulletin board would be greatly appreciated.

  unless it's actually more complex than what you're
  describing, i would
  just use a forum. you can set it so that only registered
  users can log
  in and see everything. and you can upload files and stuff.
  there's lots of free ones out there, but i'm partial to phpBB
  forums
  (the "BB" actually stands for bulletin board), myself.
  http://www.phpbb.com/
  i would take a look at that and see if it can do what you're
  looking for.
  msvobodabe wrote:
  > I am in the process of redesigning our intranet. How
  hard is it to have a
  > login to a part of this site? What I am hoping to do is
  to create a bulletin
  > board for employees, but not everyone would see it.
  There would also be
  > documents posted within this secure area. Any help you
  can give me on creating
  > this login option and bulletin board would be greatly
  appreciated.
  >

• Automatic folder creation fails  ... trying to use the bulletin board tutor

  Hello,
  I would like to create a blog using KMC functionality. For this I found an sdn article on how to create an bulletin board an this tutorial has some functionality I need in the blog too.
  Unfortunately I have some problems when I want to have an folder created automatically. Here are the steps I am doing:
  Creating a folder in the km-content named  /documents/Blog
  In Content-Management > Repository Filters > Userhome Filter+ I created an filter:
  Name: Blog
  Priority:
  URLs: Postings
  Prefix: /documents
  Startpath: /Blog
  Then I created a folder for the km-navigation iview in the portal content. The path to the initial folder is:   /alias/documents/Blog/<user.id>/Postings
  But when I call the preview to see the newly created folder ... I get the error message that the object couldn't be found (translated it means something like):
  Object not found        /alias/documents/Blog/<user.id>/Postings
  Has someone an idea what the reason could be? Is it that the automatic creation of folders is only possible in special folders?Did someone faces the same or an similar problem and could help to solve it?
  Thanks a lot and have a nice weekend,
    Vanessa

  Hello,
  It worked perfectly fine for me.
  Of course only after the restart.
  Regards
  BP

• Use of Html Collection Renderer - Bulletin Board

  Hello,
  I wanted to create a Bulletin Board as in the document "How to create a bulletin Board". But when using the navigation iViews with the Html collection renderer. It allways opens a new browser. Isn't it possible to see the next navigation step in the same window?
  Is there anybody who tried to make the bulletin Board as in the document?
  Can anybody help me with finishing mine.
  Thanks

  Thanks Darin,
  I have tried your suggestion however with no luck.
  I have a layout controller that allows a grid on top and a tree list below.  The Grid successfully displays the HTML collection renderer, and the tree-list behaves correctly.
  However, if I place a mass command in the HTML collection renderer using the suggested syntax, it does not seem to recognize the command.  I have tried several commands such as copy_admin_mass and move_admin_mass and the link opens an invalid page with the url of http://com.sap.cm/?uicommand=copy_admin_mass
  Any thoughts?

• TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters

  Hi ,everybody
  When I created and configured a App server domanin with PSADMIN, these errors below occurred,but log files didn't have useful info:
  PeopleSoft Domain Boot Menu
  Domain Name: HCMDOM
  1) Boot (Serial Boot)
  2) Parallel Boot
  q) Quit
  Command to execute (1-2, q) [q]: 1
  Archived a copy of the domain configuration to /appfs/people/opt/PS/PS_CFG_HOME/appserv/HCMDOM/Archive/psappsrv.cfg
  Attempting to boot bulletin board...
  tmadmin - Copyright (c) 2007-2008 Oracle.
  Portions * Copyright 1986-1997 RSA Data Security, Inc.
  All Rights Reserved.
  Distributed under license by Oracle.
  Tuxedo is a registered trademark.
  TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters
  ==============ERROR!================
  Boot attempt encountered errors!. Check the TUXEDO log for details.
  ==============ERROR!================
  Do you wish to see the error messages in the domain log file? (y/n) [n] :y
  PSADMIN.23310 (0) [11/30/12 10:58:42](0) Begin boot attempt on domain HCMDOM
  PSADMIN.23310 (0) [11/30/12 10:58:42](0) End boot attempt on domain HCMDOM
  Do you wish to see the error messages in the Tuxedo log file? (y/n) [n] : y
  105842.peoplesoft.ynby.cn!PSADMIN.23310: Begin attempt on domain HCMDOM
  105842.peoplesoft.ynby.cn!PSADMIN.23310: End boot attempt on domain HCMDOM
  Press Enter to continue...
  Don't know how to solve it ...

  Hi,Nicolas
  Before I booted up the app server ,I set the environment variable PS_CFG_HOME to /appfs/people/opt/PS/PS_CFG_HOME,and the above error occured,but when I unset the PS_CFG_HOME,it booted up successfully.But another error occured when booted up :
  exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 232457 -D TESTSERV -S PSMONITORSRV : Failed.
  tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
  exec tmshutdown -qy
  I checked the pemission to boot up app server :
  SQL> SELECT CLASSID, STARTAPPSERVER FROM PSCLASSDEFN WHERE CLASSID IN (SELECT OPRCLASS FROM PSOPRCLS WHERE OPRID='PS');
  CLASSID STARTAPPSERVER
  PSAPPS 1
  EOEN9000 1
  EOCO9000 1
  PTPT1100 1
  PTPT1200 1
  PTPT1300 1
  and update:
  SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PSAPPS';
  1 row updated.
  SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE
  CLASSID='EOEN9000';
  1 row updated.
  SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE
  CLASSID='EOCO9000';
  1 row updated.
  SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1100';
  1 row updated.
  SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1200';
  1 row updated.
  SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1300';
  1 row updated.
  After doing these,it booted up with the error:
  exec PSRENSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSRENSRV :
  Failed.
  tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
  Then I configured the REN server :
  Values for config section - PSRENSRV
  log_severity_level=Warning
  io_buffer_size=8192
  default_http_port=7180
  default_https_port=7143
  default_auth_token=<my hostname>
  Boot up app server again :
  Booting server processes ...
  exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 42933 -D TESTSERV -S PSWATCHSRV :
  process id=24245 ... Started.
  exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D TESTSERV -S PSAPPSRV :
  process id=24246 ... Started.
  exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D TESTSERV -S PSAPPSRV :
  process id=24256 ... Started.
  exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSSAMSRV :
  process id=24266 ... Started.
  exec PSRENSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSRENSRV :
  process id=24273 ... Started.
  exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 42933 -D TESTSERV -S PSMONITORSRV :
  process id=24279 ... Started.
  exec WSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //<my hostname>:7000 -z 0 -Z 0 -I 5 -T 60 -m 1 -M 3 -x 40 -c 5000 -p 7001 -P 7003 :
  process id=6834 ... Started.
  7 processes started.
  Here is my configurations:
  OS:RHEL 5.4
  DATABASE:ORACLE Database 11.2.0.1
  Peoplesoft Tools: 8.52
  Application version:HCM 9.1
  Domain configuration:
  Quick-configure menu -- domain: HCMAPP
  Features Settings
  ========== ==========
  1) Pub/Sub Servers : No 16) DBNAME :[PEOPDB]
  2) Quick Server : No 17) DBTYPE :[ORACLE]
  3) Query Servers : No 18) UserId :[PS]
  4) Jolt : No 19) UserPswd :[PS]
  5) Jolt Relay : No 20) DomainID :[TESTSERV]
  6) WSL : Yes 21) AddToPATH :[.]
  7) PC Debugger : No 22) ConnectID :[people]
  8) Event Notification: Yes 23) ConnectPswd:[peop1e]
  9) MCF Servers : No 24) ServerName :[<my hostname>]
  10) Perf Collator : No 25) WSL Port :[7000]
  11) Analytic Servers : No 26) JSL Port :[9000]
  12) Domains Gateway : No 27) JRAD Port :[9100]
  It seems OK,But when I tested the 3-tier connection :
  It prompted: Could not connect to appliaction server HCMAPP.possible causes are:the server name/IP address and port for the application server alias are incorrect....
  Contect your system administrator to check the Tuxedo log for more information
  But I can sign on the database using Application Designer,and app server already booted up.
  Additional ,the Tuxedo and Weblogic were installed within different directorys,does it matter?
  Do you need more configuration info?
  Thanks for you to reply my questions ~

• Toshiba Bulletin Board labels grayed out

  New laptop and Bulletin Board was working just fine for the first few days.  Now the labels gadget is grayed out and cannot be accessed.  I really like using the labels and want them back.  I'm afraid to do an uninstall and install because I have a  lot of information on a couple of boards I have created and I don't want to lose the data.
  Any suggestions?

  Thanks for responding, Jerry! I realized that I had forgotten to put the model and parts #s in my Post the minute I clicked. Here they are:
  Toshiba NB 305-N410BL
  Part# PLL3AU-00G00C
  I have another issue vis-a-vis the labels on the bottom of the laptop.  I have a Microsoft sticker with a Product key # for Windows but I do not have a separate sticker for Microsoft Office (or for  Microsoft Works - assuming that suite has its own sticker).  In the past my HP and Dell laptops have had such software stickers either underneath the laptop itself near the Microsoft Windows label or somewhere on the outside of the box the laptop was packed in...or on the disc or CD (there are no discs or CDS with this Toshiba - like most if not all new computers).
  Do you have any ideas how might get my Product Key # for my Microsoft Office Suite?  I can only use this software 25 times without registering...and I have 22 uses left.  I write a lot and don't this software to lock up on me.
  Many thanks!
  Alex

• Bulletin Board in SAP

  HI All,
  I am creating a new bulletin board. Can anyone please help me on how to start as I am a newbie to the teamroom.
  Any document would really help.
  points are awarded for sure***
  Cheers,
  Satya

  Hello Sathya,
  Here are some links which will fulfill your requirement.
  https://www.sdn.sap.com/irj/sdn/wipro
  https://www.sdn.sap.com/irj/sdn/message?messageID=4472580
  http://help.sap.com/saphelp_nw04/helpdata/en/44/f99140c2eab118e10000000a1550b0/content.htm
  .If u find any problem please feel free to contact me .I will send you more documents if i get as per your requirements.
  With Warm Regards,
  Rakesh Kumar Verma.

• Bulletin Board feature

  I enjoyed the Bulletin Board on my Satellite L500 and used all the features; it's great, you can drag gadgets and personalize, I used the To Do list daily. I scheduled it to open on logon and it did. I removed the scheduled task when I found that it slowed the open. When I deleted the task, the Bulletin Board no longer opens. When I click on it to open it, it pins onto the task bar and there is a thumbnail on mouse over, but that's it. I can see my personalized BB in the preview, but it will not open. Here is what I've tried: All the troubleshooting features on Windows 7, including AutoPeek. I tried restoring to a point to before I scheduled the task 2 days prior. When I did that, the error said that my C drive is corrupted! I deleted the Bulletin Board application and installed it again from the Toshiba Application Installer. The install was successful, but the program still won't open and the thumbnail still shows my personalized BB, which is strange since I deleted that one. Any thoughts? +

  I have exactly the same problem: Iwas enjoying of my bulleting board and in a moment I lost the acces to the program and the message syas: code error:23. I made all the proceedments, as you and either function to me.
  But the extrange thing is tha I created a different account, only for testing, and in this one the bulletin board ins funtioning very well..... what's happenning????

• Bulletin Board boot  does not bring up services

  Hello,
  I am trying to create a new tuxedo server, i have built it successfully and have
  included the server name in the servers section of the Config File . The Config
  File was built to
  create the Tuxconfig file.It successfully created the binary file.
  Now i Boot my bulletin board and i get a message CMDTUX_CAT 819 Info .Process
  id nnnnn Assume Started(Pipe)
  I dont see this in my processes using tmadmin.
  Is there any step that i am missing..
  Any help would be appreciated
  Thanks
  Vijaya

  Vijaya,
  The process hasn't started correctly. Generally, "assume started" means
  that the server hasn't started!
  Has it core dumped? (Is there a core file in your appdir?)
  Does it need access to a shared library that isn't in your shared
  library path?
  If you run tmboot -i <your sserver's id> -g <your server's group> -d 1
  you will see the server's full command line. One wahy to debug it is to
  type that command line in and run the server from the shell prompt manually.
  I hope that helps.
  Regards,
  Peter.
  Got a Question? Ask BEA at http://askbea.bea.com
  The views expressed in this posting are solely those of the author, and BEA
  Systems, Inc. does not endorse any of these views.
  BEA Systems, Inc. is not responsible for the accuracy or completeness of
  the
  information provided
  and assumes no duty to correct, expand upon, delete or update any of the
  information contained in this posting.
  Vijaya wrote:
  Hello,
  I am trying to create a new tuxedo server, i have built it successfully and have
  included the server name in the servers section of the Config File . The Config
  File was built to
  create the Tuxconfig file.It successfully created the binary file.
  Now i Boot my bulletin board and i get a message CMDTUX_CAT 819 Info .Process
  id nnnnn Assume Started(Pipe)
  I dont see this in my processes using tmadmin.
  Is there any step that i am missing..
  Any help would be appreciated
  Thanks
  Vijaya

• Forms in SAP Bulletin Board iView

  Hello!
  I have created a room and I have to show only one entry point to a XML form project in SAP Bulletin board iView. Does anybody know how to do this? Thanks

  Hi Unai,
  I understood that you want to restrict the forms that can be created in this bulletin board iView. From your SDN posts history (https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=2508529) I saw, that you know how to restrict the availability of xml forms on special KM folders.
  So you need to create another rule where you specify this XML forms project and the folder where the bulletin board iView creates the xml documents
  There are (at least) 2 ways to find out this directory:
  1. You can enable the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f4/2c6b2089cc784bb384a7ea058de50d/content.htm">Debugging Settings</a> in KM, afterwards go to this iView, press on  "Rendering Information" and check the "Folder Settings Resource".
  2. You press on the "Edit" link on the right side of the iView. In the URL you should see the same path between ".../prtroot/com.sap.km.cm.navigation" and "?ShortContextID=...".
  Saludos,
  Robert

• GUI Bulletin Board Question

  Hello,
  I want to produce a simple GUI application that mimics a bulletin board. Where there would be a GUI that people could insert a message, and I could allow others to view the past messages and possibly allow some filtering as to what they see.
  I want to go from the GUI window to a text file to hold the past messages. After the text file I will probably move up to a DB, but for now, I think it is a good starter application.
  I am having trouble with the IO class, because of the so many ways to read and write data, and was hoping someone may give me some guidance as to the best way to handle the IO, (which classes) or point me to a tutorial where they are reading a line at a time, and possibly putting them into a collection and then showing it in a GUI.
  I know that is kind of a large question, but any assistance to get me started would be helpful, and then I can refine my questions as I begin building my project.
  Thanks for your time,
  Scott

  Check out:
  http://www.javacoffeebreak.com/java103/java103.html
  and
  http://java.sun.com/docs/books/tutorial/essential/io/index.html
  I used the above links to come up with the above code to write to a file:
  try {
  FileOutputStream out = new FileOutputStream("SearchTableFile.Dat"); // Output file name
  PrintStream p = new PrintStream(out); //Create a stream to write to the file.
  for (int i=0; i<SearchTableFileData.length; i++) {
  p.print(SearchTableFileData); //write data stored in SearchTableFileData Array
  p.print("\n"); // write end of line character.
  // try and catch are error handling
  } catch(IOException ioe) {
  System.out.println("Error: " + ioe);
  To read the file back into the Array I have:
  try {
  DataInputStream in2 = new DataInputStream(
  new FileInputStream("SearchTableFile.Dat")); // Input File Name and Stream
  SearchTableFileData = new String[SearchTableFileLines];
  line = in2.readLine(); //reads first line
  SearchTableFileLines = 0;
  while (line != null) {
  SearchTableFileData[SearchTableFileLines] = line;
  SearchTableFileLines += 1;
  line = in2.readLine(); //reads next line
  in2.close();
  } catch (EOFException e) {
  } catch(IOException ioe) {
  System.out.println("Error: " + ioe);
  Hope this helps. The file reading routine has some variable that are declared elsewhere in the code and I didn't think it was necessary to explain all of them.

• Re: Did you know: Playing radio streams from bulletin board

  a) Make a textfile with the url.
  b) Rename the file ending to .asx.
  c) Draw the file from the explorer to the bulletin board

  Yes! More or less! I am very happy!
  I'm using 9 desktops with "dextop". I've installed the multi-touch pack from microsoft with its "flicks". Panning is enabled in my firefox browser. It's a very good system.
  (I've disabled automatic rotation. There were to much bugs with explorer.)
  Sometimes the screen stops to react. The solution is the following: I hold down the hardware-key for ctrl-alt-del until the screen with the task manager appears. Then I touch cancel and everything works again.
  Bulletin Board is very cool with 9 desktops: All the windows of every screen appear in the list of open windows. So applications can easily be moved from one desktop to another one. And with bulletin board you can start applications on the desktop you want and play multimedia files.
  But in the last time I've sometimes a problem: When I restart the computer from standby and I touch the lower screen the cursor appears in the higher screen. I think that the problem is linked to the bulletin board. I've no good solution for the problem. I close the computer and restart it from standby and everything is fine again.
  The w100 is a very good computer. The dual screen is very useful. I can always switch the keyboard to the screen where it doesn't hide important informations.
  I can read big articles on two screens.
  For programming it is very useful too. With the panning I can go through the program text in Delphi very fast. I can insert the text exactly at the place were is belongs without mouse movements. I can move parts of text very fast. ...and I can work in my bed! With the visual C++ express editor the panning doesn't work very well. But the scroll bars are very reactif if I double click them.
  I like very much the bulletin board, but there are some bugs. It has much potential and could be a very rich platform for multimedia and social services. I can start directly my delphi projects from bulletin board with double click and open my browser from bulletin board directly at the right page.
  I take pictures of the digital edition of my news paper on the bulletin board.
  I'm waiting for the next upgrade of the bulletin board.

• Using Keynote as community bulletin board- Can you overlay weather conditions?

  We want to set up a Mac Mini running Keynote 09 to use as our community TV station's bulletin board to run when we are off-air.
  Our old system software was only made for this purpose, so it could bring in (and overlay all the slides) with our local weather temps, etc. via our weather equipment on our roof.
  Is there a way do to this within Keynote while it is playing overnight?
  Thanks!
  Ken Goldenberg

  We want to set up a Mac Mini running Keynote 09 to use as our community TV station's bulletin board to run when we are off-air.
  Our old system software was only made for this purpose, so it could bring in (and overlay all the slides) with our local weather temps, etc. via our weather equipment on our roof.
  Is there a way do to this within Keynote while it is playing overnight?
  Thanks!
  Ken Goldenberg

• I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

  I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
  Thanks.

  Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
  If possible, please try Indesign CS 4.