Creating a Business system in the SLD

I am receiving an error message when trying to create a business system in the SLD. The error is "The selected client has an associated logical system nae that is already  used for another business system. Select a different client."
Here is my issue. The business system that I am creating is for our R/3 4.6C production system. I currently have a business system for our R/3 4.6C quality system. Our prodution and quality R/3 systems do have the same logical system name and client number. This is because we recreate our qaulity R/3 system from our production system.
So, the question is, How do I create a business system in the SLD for my production R/3 system when the logical system name is used assoicated with and business system.
I should add that all my R/3 systems have been created as technical systems without any problems.
Thanks,
Jim

It is recommended to have all ALE names unique.
If it is not possible the following workaround can be used.
Create one system in SLD (business system/technical system) which contains the ALE name. Proposal: The production system
Create the other systems(dev/QA) without the ALE name
During configuration the production system will be configured as usual.
For Dev/QA systems: Define in the receiver agreement the header mapping and use The Receiver service to reference the production system. Because you reference the production system the ALE name of the production system will be used to fill the idoc.

Similar Messages

  • SAP XI 3.0 - Error while reading the ID of own business system from the SLD

    Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100. 
    I get this error in the SXMN_MONI.  The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
    I could able to get "SUCCESSFULLY PROCESSED" in development and production.  But only in Quality I getting this error.  Could anyone help me to fix this issue.
    thanks...

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Error while reading ID of own business system from the SLD

    HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>DSM</SAP:P1>
      <SAP:P2>900</SAP:P2>
      <SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
    I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
    Regards,
    Anand

    Hi Anand,
      check the two thing's in XI.
    1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
    2. Create the business system based on above technical system and select the role of business system is Integration server.
      URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
    3. Create the technical system based on your SAP R/3 system.
    4. Create the business system based on your SAP R/3 system.
    here you need to select role of business system : Application system.
      related integration server is : <XI System SID has to come>
    and try to refresh the initical cache once ...
    http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
    after all the things post what is the problem you are faceing.
    Regards,
    Venu.

  • Error when reading the ID of the business system from the SLD

    Hi,
    I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
    The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
    What could have gone wrong. Thanks in advance.
    Srini

    Hi,
    :::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
    1) SAP_XI_Developer_ABAP +
    2) SAP_XI_Developer_J2EE  +
    3) SAP_XI_MONITOR_ABAP   +
    4) SAP_XI_MONITOR_J2EE    +
    5) SAP_SLD_ADMINISTRATOR +
    6) SAP_XI_BPE_MONITOR_ABAP +
    7) SAP_XI_DEMOAPP
    8) SAP_XI_DISPLAY_USER_ABAP +
    9) SAP_XI_DISPLAY_USER_J2EE +
    Regards
    Sesh

  • SLD Error in IE:Error while reading ID of own business system from the SLD

    Dear Champs,
    Scenario : JDBC to Proxy(APO system)
    We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>R/3 Sys ID</SAP:P1>
      <SAP:P2>"Client"</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
    Regards,
    Manikandan

    Hi Mani,
    Solution 1:
    Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
    Solution 2:
    Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface).

  • Error while reading the ID of own business system from the SLD for system

    Hello,
    I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>ZTA</SAP:P1>
      <SAP:P2>013</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody help me?

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Error while reading ID of own business system from the SLD for system D18

    Dear guru's,
    I have almost completed a file2proxy scenario but I'm stuk on the following.
    When sending a message the outbound adapter says:
    <b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
    What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
    Any suggestions?
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>D18</SAP:P1>
      <SAP:P2>200</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
    Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
    here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
    Hope you problem is fixed

  • Error while reading ID of own business system from the SLD for system DPI

    Hi All,
    My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
    In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
    Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
    Please help me out.
    Thanks
    Kiruthi
    Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

    Hi,
    Check transaction SLDAPICUST for correct SLD configuration.
    http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
    ~Sanv...

  • Error while reading ID of own business system from the SLD for system

    Dear all,
    We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
    - SLDCHECK reports no errors
    - SLAPICUST: pointing to the SLD
    - SXI_CACHE with full refresh: no result.
    Does anyone have a clue for me?
    Kind regards,
    John.

    I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
    1. First try to clear full SLD cache and then test.
    2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

  • How to creat a Business System and Tech System in SLD for the DB2 DataBase?

    Hi,
    How to creat a Business System and Tech System in SLD for the DB2 DataBase?
    Joseph

    Hi,
    Technical System
    In SLD, click on technical landscape->New Technical System->WebAS ABAP.
    Business System.
    1.Goto Business Landscape->New Business System->Name the business system.
    2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
    Go Through this links..
    TBIT41:
    https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
    TBIT42:
    https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
    TBIT43:
    http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
    TBIT44:
    https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
    Also try elearning.
    https://www.sdn.sap.com/irj/sdn/elearn
    Thanks,
    Satya Kumar

  • Registration of Business system for the Integration Engine Java in the SLD issue

    Hi,
    We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
    - Configuration Wizard: PI-AEX initial setup
    - Configuration Wizard: PI Self Test for AEX
    However when we were Checking the AEX Configuration as per help.sap.com
    Check the registration of a business system for the Integration Engine Java in the SLD:
        Enter https://<host>:<port>/sld .
        Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
        The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
    More information: SAP Note 1435392
    for us the Pipeline URL is as below
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    and the rest " ?ximessage=true "  is not there.
    Also we ran the below wizard
    Configuration Wizard: PI Self Test for AEX
    and it finished successfully without any issue.
    Any Suggestions what could be missing.
    Thanks,
    Regard
    Ahmed Mohammed

    Hi,
    I found the below SAPNOTE which confirms that the Pipeline URL should be
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
    However on help.sap.com it is different.
    Any one experienced the same ?
    Regards
    Ahmed Mohammed

  • The business system HRK_005 is not a business system in the group assigned

    Hi there,
    i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
    In this Szenario, there are XI and HR Systems included.
    On Consolidation Side:
    XIK_001
    HRK_005
    in Prod
    XIP_001
    HRP_001
    When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
    The business system HRK_005 is not a business system in the group assigned to production.
    I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
    Can someone help here?
    Thanks
    Bjoern

    Oops i spoke with u r key code it bounced back .
    Well i explained standard way to export and import Intergration Directory objects.
    K - Development System ( SLD_Dev)
    P - Production System (SLD _Prod)
    In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
    IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
    Assign all BS of K to Group1
    Assign all BS of P tp Group2
    For BS of K specify the target transport as Production BS (P).
    Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
    Now export from K (Dev) to P(prod)
    am not able to view the link provided.
    Any ways i have listed standard way for transport, hope this helps
    Srini

  • Unable to create New Business System

    Hi
    I Installed XI 3.0 and configuring as per the configuration guide.
    When I try to create Business System (SLD) I get the following error message.
    "Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
    Steps:
    Logon on to SLD
    Click on New Business System
    Name: XID  and click on Next
    Technical System Type: Web AS for ABAP
    Select System: XID on Hostname   and select Client
    Installed products: Choose all and click Nextt
    Integration Server:
    Business System Role: Integration Server
    Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
    Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
    How to create a Business system and assign the role of Integration Server?
    Thanks for the Help
    Raghu

    Hi RG,
          Once we had   same error ,due to some reason business system with role integration server deleted.
           It has been resolved by deleting XI technical system and recreating same after that  it allows to define new bussiness system with role as integration server .
    It might help you.
    Regards
    Santosh

  • Problem by Maintaining a Business System for the Integration Server

    Hi to all,
    I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
    Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
    Since than I’m receiving the following error message when I try to refresh my adapter engine cache:
    com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
    Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
    I’ve also checked the IS URL (TR: SXMB_MONI) and it seems that it’s ok. 
    Regards
    Naycho

    Hi Naycho,
    i think you have to clean up some sld rubbish
    Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side  "business system". Delete all entries you find for your business system, after that try to recreate it.
    Regards,
    Udo

  • I have Pages 09 and I have  created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

    I have Pages 09 and I have  created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

    I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

Maybe you are looking for

  • Battery life issue related to display/graphics?

    Hi I bought a refurbished macbook pro last May. And the battery didn't even last 2 hours and half, which i found it weird since the macbook pro i had before(2007 model) had battery life of 3hours and half. a month later i bought it, i started having

  • Urgent - can't set managed bean value using a form, getting null

    I have a form with a bean -- unbelievably, I can't get the values entered into the form by the user to get stored into the bean. Everything is null... I've looked at a zillion examples, posts and compared etc...yet still can't see what is missing. He

  • Batch creation during goods issue to order

    i had a scenario where  4  production lines are used to produce fg material,in final operation all material produced in different lines are mixed . i am using different grades of raw material( single raw material) in different ratio in each line . du

  • Playing out an HD sequence to SD tape

    Hello, can someone help? I have an HD sequence ( 1920 x 1080, 1080i)which I am trying to play out to an SD tape (don't have an HD deck at mo). The playout seems to freeze on one shot but the audio is fine. It also seems to be letterboxed. Can someone

  • Viewing a transaction log for a query

    Hi all, I have an application which has a query in some functionality of it. I want to check how many times in a month that query is referenced or used. I hope oracle maintains a transaction log or something of this sort. Is there a way to analyze th