Creating a copy of an existing JTable that does not have source code.

Hi
I am working on a java swing based application. We used a third party API for JTable for showing some data in a table format and also for printing function. As of now print button is printing the whole table being shown in the application. Our new requirement of printing is �Users don�t want to print all the columns being shown in the application and they wanted to have print of columns whatever they would like to see�.
The above requirement can be fulfilled if I can have a copy of the existing table. Unfortunately we don�t have the source code of the table being shown in the application as we are using 3rd party libraries. Had the source code been there I could have implemented cloneable interface or proto type pattern.
Can some body help me how can I create a copy of the existing table? Basically the high level approach I thought of is create a new object of the table class and copy the properties/attributes of the existing table to the new table object. But I don�t know what attributes should be copied so that I can have the copy of the original table and how to construct (code) this new table.
I would be very grateful if some one could help me with this.
Thanks & Regards
Srini

I understood your suggestion. But it would be very difficult to migrate as it requires lot of changes across different tabs of the existing application. This application was developed around 6 years ago. And this change would require lot of regression testing too.
Do you have any idea of creating the copy of the available JTable object?

Similar Messages

  • Embedding fonts in an existing pdf that does not have the fonts embedded

    Hi,
    I have an existing pdf that fails to open on my ereader.
    So I opened in acrobat x pro to see what might be the cause.
    Selecting "file"--> "properties" -->"font" ( fonts used in this document) I can see that this pdf uses multiple windows trueType fonts and that none of them are embedded in the pdf document.
    Now my ereader is linux bases, so I am guessing this might be a problem.
    Being an ereader I didn' give me much to go on.
    So i would like to embed all the fonts listed in this list into the pdf file and save it again with the fonts embedded.
    I went to "file"-->"save as optimized pdf" -->"font"
    But there both lists embedded and unembedded fonts are empty.
    Why is this and how can I embed the fonts shown in the document properties into the pdf?
    They seem standard windows fonts like e.g.  ArialNarrow

    I just looked a bit furder and actually checked wether the fonts existed and found the following:
    I am using windows vista.
    The fonts mentioned in the properties of the pdf actually exist in the windows installed fonts but
    in windows they are no longer TrueType but OpenType.
    So I am guessing this might be the reason they are not in the list of unembedded fonts in the optimizer window.
    Is there an easy way to say to acrobat to replace one font ( not found on this computer) with another font that does exist and also to embed that font in the pdf document?

  • Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

    Hello,
    Suddenly the working CRM is being stopped for some group of users.
    I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
    But for other domain user having problem to access CRM.
    I tried to add a user from a domain which is not of CRM domain then it gives following error.
    "Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
    <Message>LookupAccountNameW failed with error</Message> "
    The change is made - AD group have upgraded Activer Directory server to 2012 R2
    Please help as the Production CRM is not working for other domain user.

    We have Activer Directory Structure like below.
    One Root Domain says A
    and there are multiple child domain like B,C,D etc...
    B,C and D are all in same level,they are child of A domain.
    There are two way transitive trusts between A and all the child Domain.
    But there is no trust in between B and C and so on.
    Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
    If this post answers your question, please click &quot;Mark As Answer&quot; on the post and &quot;Mark as Helpful&quot;

  • Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

    Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
    - Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
    System: PC Windows 7 using Acrobat X Prof. - Thank you!

    Hi ,
    There is an option of embedding index for faster search while converting email to a PDF .
    However I am not sure that will serve your purpose or not .
    I would recommend you to get in touch with Microsoft support as well .
    Meanwhile I'll work on it and get back to you in case I get a desired solution .
    Regards
    Sukrit Dhingra

  • How do I create an executable for a computer that does not have IVI drivers

    I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
    Thank you,
    Zach Oberman

    Zach,
    Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
    If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
    At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
    You may be able to obtain a traditional LabVIEW driver from
    Tektronix
    Developer Exchange
    Requesting a
    driver
    Other Resources
    Thanks,
    --Bankim

  • Can I copy/paste a FF Reader pdf file to a 2nd computer that does not have FF Reader?

    I have 2 computers, one has Fire Fox Reader one does not. Is it possible to copy/paste by way of a jump drive a pdf file that is saved using Fire Fox Reader to the computer that does not have Fire Fox Reader and be able to open & work with that pdf file? The second computer only has Adobe Reader installed.
    I already know that an Adobe Reader pdf file moved from the 2nd computer to the first will open, it opens in Fire Fox Reader.

    Yes, if you save a PDF file then you can open that file with any program that can handle such a PDF file.
    So if the other computer has the Adobe Reader then that program will be used.

  • How do i re-install version 10 onto a pc that does not have a copy of it? acrobat_x download pro win

    How do i re-install version 10 (upgrade version) onto a pc that does not have a prior copy of it? acrobat_x download pro windows
    Message was edited by: [email protected]

    Hi [email protected],
    Thank You for psoting on the forums, in order to install an upgrade version you do not need to have the prior version installed on the system, only thing that you need is the serial number of the previous version.
    Please check the document mentione below for further information.
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html
    Thanks,
    Vikrantt Singh

  • I just purchased the apple tv, i have an older tv that does not have an HDMI input.   is there a converter i can get because the itv only have an HDMI output ?  help.

    i just purchased the apple tv, i have an older tv that does not have an HDMI input.   is there a converter i can get because the itv only have an HDMI output ?  help.

    Welcome to the Apple Community.
    There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
    HDCP
    HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
    Resolution and aspect ratio
    I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p.

  • Since I have Yosemite on my iMac I can't view PDF files in Safari anymore.  It keeps telling me to upgrade my Adobe Reader, but it is the latest version.  Please help?  I don't have this problem on my Macbook that does not have Yosemite installed.

    Since I have Yosemite on my iMac I can't view PDF files in Safari anymore.  It keeps telling me to upgrade my Adobe Reader, but it is the latest version.  Please help?  I don't have this problem on my Macbook that does not have Yosemite installed.

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and check the box marked
              Allow Plug-ins
    Then click
              Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
              Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • Using a dll function that does not have any inputs from a VI

    Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project.  I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call.  I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)). 
    Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
    Thanks, Mike

    Thanks for the responses guys:
       I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument  struct status_struct* status as only an output instead of the default of input and output.
    I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface. 
    This is in all likely hood a case of my self being too dense and missing something fundimental ;-)  I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
    Attachments:
    Start.jpg ‏7 KB
    shurtdown.png ‏9 KB

  • How can I add location to a photo that does not have a gps location? On iPhoto it was easy.

    how can I add location to a photo that does not have a gps location? On iPhoto it was easy.

    You can use the Settings in the slideshow to Show Captions,  either the Description filed be display, the Title field or both.
    If you create the slideshow in iDVD from still photos from iPhoto you can add the Description and/or Title via the settings in iDVD.
    Since iDVD adds both automatically the user must go thru the slideshow and remove those items not wanted.

  • HT2953 If i purchase CD that does not have iTunes match...how do i get it to play on my devices(e.g.. phone, iPad)

    If i purcharse CD that does not have itunes match...how do i get it to play on other devices(eg. phone, ipad)?

    I go to amazon.com, look up the album in the search bar, the do a copy (right click, copy) on the artwork that shows up.  Then you go to iTunes and right click the album you want to update with that artwork, click "get info" click in the artwork square and press the 'command and V' keys for paste (fyi right click paste does not work here) you must just click in the square and press command-V which will paste it.  It should then place that artwork in the square to update all songs in that album.  Hope this helps...

  • I need to get some video files onto my iphone from a computer that does not have my itunes library on it

    Currently I am away from home, and using a computer that does not have my main itunes library on it. I do, however, have some video files on this computer that I would like to place onto my phone for the drive home tomorrow. Unfortunately,  It seems there is no way to do this without completely wiping my iPhone and replacing it with this computers empty library, as the "manage content manually" feature apparently requires me to do this. Is there any way to just add some mp4s to my iphone without erasing all of its data?.

    ManSinha wrote:
    What kind of computer?
    On a Windows PC plugging in your phone will invoke the Autoplay dialog which also gives some options
    But only if iTunes is installed on the computer and is paired as a trusted device. Which the OP does not want to do.

  • How to import iDVD app from Time Capsule to my new iMac 21" that does not have iDVD?  I can find the iDVD app in the Time Capsule, then what?

    I have a new 21" iMac to replace a 6-year old iMac 24.  My Time Capsule has the iDVD app saved (?) and I can find it, but I can't figure out how to move it to my new iMac that does not have the app.  How to do this?

    You are probably better to install it from ilife disk.
    Can't Find a update or latest Version of iDVD to Download or a Compatibility to Yosemite

  • I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for