Creating a custom dictionary for Acrobat and Reader.

I want to create a custom dictionary to be used by all of our users when they access a “forms document” through Adobe Reader/Acrobat.
Here are some of the issues:
The default dictionary name under Custom Dictionaries has a .clam extension.
Is there a way to edit this?
Does it contain the index settings for all the other added.txt and excluded.txt dictionary files?
The Reader's default location is under a user’s LocalLow folder.
C:\Users\PIN\ AppData\LocalLow\Adobe\Linguistics\Dictionaries\Adobe Custom Dictionary.
The Acrobat default location is under the user's Roaming folder.
C:\Users\PIN\ AppData\Roaming\Adobe\Linguistics\Dictionaries\Adobe Custom Dictionary\.
This is buried under the users profile and we need to be able to update these files on all the user’s workstations prior to log on.
This could be done by redirection of the new custom dictionary. What is the location of that setting in the registry?
Is there is a way to append to the standard dictionary file so as not to replace any setting that a user may have made to the dictionary?
Is this done to the .clam or .txt file outside of the Adobe Reader application?
What is the “All” setting in the dictionary?
Does that imply the program will look through all the dictionaries?
Is there a way to create a new dictionary name that would appear under the preferences\spelling\dictionaries list. Is there an Index file that would point to a newly created Dictionary folder?

Custom dictionaries must be created with a 3rd party program provided by Proximity (http://www.proximitytechnology.com/spell_correction.htm).
The spelling support files are installed in this directory for all users (this is only the default)
C:\Program Files\Adobe\<product>\Resource\Linguistics\Providers\Proximity
File types include:
ENV - eg: grmphon.env - the phonetic rule file for the spelling dictionary language. There is one of these “ENV” file for each language.
CLX - eg: grm32.clx - a language related part of spelling dictionary. There is one of these “CLX” file for each language.
LEX - eg: grm104.lex - an actual spelling dictionary. There may be several dictionaries for a given language, for example, grm104.lex, grm10401.lex.
So the answer is:
Create a custom dictionary with Proximity and use the Wizard or some other method to deploy the files in the correct location.
Ben

Similar Messages

Email submit button created in LC ES2 causes Acrobat and Reader to crash

I've created a form in LC ES2, and included an email submit button. When I open this form in Acrobat Reader 10.1.3, click the submit button, and specify "Desktop Email Application," as opposed to the "Internet Email" option, no email is generated, Reader locks up and requires force closing. This happens also with Acrobat X Pro. With both programs, it happens (1) when the form is Reader enabled AND when it's not, (2) when I use an http submit button with a submit to URL of: mailto:[email protected], and (3) when I use a standard button, with control type "submit" and a submit to URL of: mailto:[email protected]
I AM able to save the form in Acrobat Pro and in Reader (when rights are enabled), I just can't email it.

Have had the same problem for years. It crashes for me when i just try to email within acrobat. Not sure if its a problem causes by my work network or if it is just another thing never to be fixed by Adobe.

Can I create a custom location for Premiere and AME presets?

Our institution has volatile user accounts meaning that all user specific preferences, presets and files are deleted on log off.
However I would like to make some custom Premiere sequence presets and AME export presets available to all users by default.
Can anyone suggest a way to store these presets in a non-user specific location and still have Premiere and AME locate them?
Alternatively if anyone can suggest a way of packaging up these presets and copying them into the appropriate user locations on logon that would also be of interest!?
Any suggestions appreciated (some further details and system spec below)...
thanks,
Darryl
Typical location of presets as far as Im aware:
Users/[USER]/Documents/Adobe/Premiere Pro/6.0/Settings/Custom/
Users/[USER]/Library/Preferences/Adobe/Common/AME/6.0/Presets
Premiere Pro CS6
AME CS6
iMacs with 10.8.4 (2.7 Core i5 8GB)
(Also looking for Windows 7 solution for same issue)

Our institution has volatile user accounts meaning that all user specific preferences, presets and files are deleted on log off.
However I would like to make some custom Premiere sequence presets and AME export presets available to all users by default.
Can anyone suggest a way to store these presets in a non-user specific location and still have Premiere and AME locate them?
Alternatively if anyone can suggest a way of packaging up these presets and copying them into the appropriate user locations on logon that would also be of interest!?
Any suggestions appreciated (some further details and system spec below)...
thanks,
Darryl
Typical location of presets as far as Im aware:
Users/[USER]/Documents/Adobe/Premiere Pro/6.0/Settings/Custom/
Users/[USER]/Library/Preferences/Adobe/Common/AME/6.0/Presets
Premiere Pro CS6
AME CS6
iMacs with 10.8.4 (2.7 Core i5 8GB)
(Also looking for Windows 7 solution for same issue)

Is it possible to create a custom dictionary for my iPhone?

I use the dictation feature a lot, but it does not know how to spell some words. Is there a way to teach it the correct spelling? Perhaps with Siri?
Thx

There are apps, in the app store, like this:
https://itunes.apple.com/us/app/ringtone-maker-pro-create/id390777480?mt=8
Or, read here:
https://discussions.apple.com/docs/DOC-3792

Editing/creating a custom dictionary

I have some custom dictionaries in my Apple Dictionary application. I'm looking for a way to edit them (change font colors, line spaces, etc.), but I don't fin any program that can edit dictionaries or let me even create one myself.
Any ideas?

Custom dictionaries must be created with a 3rd party program provided by Proximity (http://www.proximitytechnology.com/spell_correction.htm).
The spelling support files are installed in this directory for all users (this is only the default)
C:\Program Files\Adobe\<product>\Resource\Linguistics\Providers\Proximity
File types include:
ENV - eg: grmphon.env - the phonetic rule file for the spelling dictionary language. There is one of these “ENV” file for each language.
CLX - eg: grm32.clx - a language related part of spelling dictionary. There is one of these “CLX” file for each language.
LEX - eg: grm104.lex - an actual spelling dictionary. There may be several dictionaries for a given language, for example, grm104.lex, grm10401.lex.
So the answer is:
Create a custom dictionary with Proximity and use the Wizard or some other method to deploy the files in the correct location.
Ben

How to create a "Custom Color" for highlighting? (Acrobat XI)

March 10, 2014
How to create a "Custom Color" for highlighting? (Acrobat XI)
The numbers in the RGB and other fields change as various numbers are changed.
I wanted to create a pale orange:
Hue               13      Red      255
Saturation   240      Green 177
Luminosity    86       Blue     140
I'd selected one of the orange squares in the color grid, to display the general orange area of the slider.
I moved the slider to select a pale orange, which generated the above numbers.   Since this wasn't directly available to save to a Custom Color, I tried to edit the numbers. Unfortunately, the other numbers changed, making it impossible to actually create a color.
Any suggestions would be appreciated.
Note: I used Techsmith's Snagit to show screen shots in a Word document.
When I attempted to browse and upload the file, the error message said "[The content type of this image is not allowed.]"
OK...what images *are* allowed?

Hi Don,
I saw Gilad answered your question in another forum post.
Do you have everything you need at this point?
Let me know if you need further assistance.
Kind regards, Stacy

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

I am getting ready to sell a Mac app and I want to know what the specs are to create a custom background for my Mac App?

I am getting ready to sell a Mac app and I want to know what the specs are to create a custom background for my Mac App?
Here is a good example of what I am talking about: https://docs.google.com/file/d/0B28kNqQ8gmifRjRHam9wVnlrWG8/edit?usp=sharing

You need to post your question in the Apple Developer Forums

Error in compiling a custom dictionary for text analysis

I got a error when I tried to compile the custom dictionary for the Text Data Processing transformor. I am looking for help to solve the problem or work around the error.
The error is as follows:
[ERR] Can not create file [C:/ws_sclg.1]
Here is the command I was using:
C:\Program Files (x86)\SAP BusinessObjects\Data Services\bin> tf-ncc -d ..\TextAnalysis\languages -o C:\Sample Source\Dictionary C:\Users\jack\Documents\Visual Studio 2008\Projects\XMLFile1.xml
It appears to me that the command was trying to create a log file or some temporary file in my C drive root directory, and the OS denied the action. The Data Services is running on a Windows 2008 Server R2. I wonder if there is a way to specify where to create this log file or tempory file?
Any insight or help is appreciated. Jack

Instead of calling the command from the windows shell command interface, I was able to call the compilier from Data Services; this problem is now resolved.

Acrobat and Reader Version Issues

Hi,
I've created a PDF porffolio made up of several PDFs. When I view the PDF portfolio at the "top level" (where you see names of the individual PDFs on top of a window that looks like it should show the first page of the PDF) all it says in the window is "For the best experience, open this PDF porffolio in Acrobat X or Adobe Reader X, or later. However, I have Acrobat XI and am viewing it in Acrobat XI, so why am I having this issue?
I can at least open the PDF portfolio and all the PDFs inside. My girlfriend gets the same window when I try sending it to her and can't open the PDF portfolio at all andl she has Acrobat 11.0.3. Why is this happening to her?
Attached is a screenshot of my issue.
Thanks.

Yes, I guess I did. So I guess that's the issue. Thanks!
Since you seem to know Acrobat and Reader pretty well, I have two other issues I'm dealing with:
1.) I'd like to create a PDF portfolio of my graphic design work. In the past I've created a PDF portfolio and added other PDFs or jpegs into them with difference pieces of work. However, is it possible to create a portfolio where a multi-page PDF (within the larger portfolio) can be viewed in it's entirety (at the top level of the portfolio) without having to open the file? The idea would be that you would see one page of the portfolio with a piece of work, scroll to the right and see another, then when you get to the multi-page PDF if you kept scrolling right it would just take you through that entire PDF instead of having to open the file. Basically, what I'm trying to avoid is having to create jpegs of individual spreads of an InDesign file so they can be viewed seamlessly in a PDF porfolio instead of being able to drop in a multipage PDF. Let me know if you need clarification on this.
2.) Finally, when I've tried to re-order files within PDFs, I've occassionally had success renaming the files (ie 1.jpg , 2.jpg, 3.jpg, 4.pdf, etc) in the "display name" column under the Files tab. I once had success doing an "Initial Sort" for display name but other times it hasn't worked. Is there anyway to make re-order work consistently?
Thanks!

Creating a custom scale for current

Hi guys,
I need some help with creating a custom scale. I am reading motor current (analog I/P) and would like to display that on a graph and write it to a file. I need to use a linear scaling for custom scale. The slope is 2 and the intercept is 0. I've attache the code to make it clear what I am trying to acomplish. The way I've set it up right now is no scaling. There are 2 tasks in the code. I would like to create a custom scaling for the first task as seen in the attached code. I have done custom scaling using DAQ Assistant Express VI. But I dont see such options when I try to do the same with the DAQmx task. Please let me know how this can be done. Any help is greatly appreciated.
Thanks,
Raj
Solved!
Go to Solution.
Attachments:
Current_Voltage_RPM-_sub_VI-1.vi ‏18 KB

You both had me going nuts trying to figure how to get to that property. Basically just right click the DAQmx property node and "Select filter..." . This brings up the "Configure Filter Settings" where I chose 'show all attributes'. I could then get to the AI Custom Scale Name property.
Interestingly when you use the Property Browser and select the magnifying glass you can get to that property...but you just can't select it if you have the filter set incorrectly. Lesson Learned.
I also found this community example and that one.
Using LabVIEW 2010SP1 and TestStand 4.5

Creating a custom serializer for SOAP

Hi guys, i'm wondering if someone could help me. I'm trying to create a custom serializer for a class with SOAP and I'm geeting the following SOAPException:
Fault Code = SOAP-ENV:Server.Exception:
Fault String = org/apache/soap/util/xml/Serializer
I'm able to deploy the service with no problems.
I'm using a very simple example in which I'm only trying to get a Person class from the service. here is the deployment descriptor:
<isd:service xmlns:isd="http://xml.apache.org/xml-soap/deployment" id="urn:PersonService">
<isd:provider type="java"
                scope="Application"
                methods="getPerson">
    <isd:java class="app.PersonService" static="false"/>
</isd:provider>
<isd:faultListener>org.apache.soap.server.DOMFaultListener</isd:faultListener>
<isd:mappings>
    <isd:map encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
             xmlns:x="urn:person"
             qname="x:person"
             javaType="app.Person"
             java2XMLClassName="app.PersonSerializer"
             xml2JavaClassName="app.PersonSerializer"/>
</isd:mappings>
</isd:service>here is the PersonService.java:
package app;
public class PersonService {
    /** Creates a new instance of GetPerson */
    public PersonService() {
    public Person getPerson() {
        return new Person("joe", "something");
}here is the Person.java:
package app;
public class Person {
    public String firstName;
    public String lastName;
    /** Creates a new instance of Person */
    public Person() {
    public Person(String firstName, String lastName) {
        this.firstName = firstName;
        this.lastName = lastName;
}here is the PersonSerializer.java:
package app;
import java.io.IOException;
import java.io.Writer;
import org.apache.soap.encoding.soapenc.SoapEncUtils;
import org.apache.soap.rpc.Parameter;
import org.apache.soap.rpc.RPCConstants;
import org.apache.soap.rpc.SOAPContext;
import org.apache.soap.util.Bean;
import org.apache.soap.util.StringUtils;
import org.apache.soap.util.xml.DOMUtils;
import org.apache.soap.util.xml.Deserializer;
import org.apache.soap.util.xml.NSStack;
import org.apache.soap.util.xml.QName;
import org.apache.soap.util.xml.Serializer;
import org.apache.soap.util.xml.XMLJavaMappingRegistry;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
public class PersonSerializer implements Serializer, Deserializer {
    /** Creates a new instance of PersonSerializer */
    public PersonSerializer() {
    public void marshall(String string, Class aClass, Object object, Object object0, Writer writer, NSStack nSStack, XMLJavaMappingRegistry xMLJavaMappingRegistry, SOAPContext sOAPContext) throws IllegalArgumentException, IOException {
        nSStack.pushScope();
        SoapEncUtils.generateStructureHeader(string, aClass, sOAPContext, writer, nSStack, xMLJavaMappingRegistry);
        writer.write(StringUtils.lineSeparator);
        Person person = (Person)object;
        String firstName = person.firstName;
        String lastName = person.lastName;
        xMLJavaMappingRegistry.marshall(string, String.class, firstName, "firstName", writer, nSStack, sOAPContext);
        writer.write(StringUtils.lineSeparator);
        xMLJavaMappingRegistry.marshall(string, Integer.class, lastName, "lastName", writer, nSStack, sOAPContext);
        writer.write(StringUtils.lineSeparator);
        writer.write("</" + sOAPContext + '>');
        nSStack.popScope();
    public Bean unmarshall(String string, QName qName, Node node, XMLJavaMappingRegistry xMLJavaMappingRegistry, SOAPContext sOAPContext) throws IllegalArgumentException {
        Element root = (Element)node;
        Element childElement = DOMUtils.getFirstChildElement(root);
        Person target;
        try {
            target = (Person)Person.class.newInstance();
        } catch (Exception e) {
            throw new IllegalArgumentException("Problem instantiating bean: " + e.getMessage());
        while(childElement !=null) {
            Bean paramBean = xMLJavaMappingRegistry.unmarshall(string, RPCConstants.Q_ELEM_PARAMETER, childElement, sOAPContext);
            Parameter param = (Parameter)paramBean.value;
            String tagName = childElement.getTagName();
            if(tagName.equals("firstName")) {
                target.firstName = (String)param.getValue();
            } else if(tagName.equals("lastName")) {
                target.lastName = (String)param.getValue();
            childElement = DOMUtils.getNextSiblingElement(childElement);
        return new Bean(Person.class, target);
}and finally here is the client app class that calls the service, the GetPersonClient.java:
package app;
import java.net.MalformedURLException;
import java.net.URL;
import org.apache.soap.Constants;
import org.apache.soap.Fault;
import org.apache.soap.SOAPException;
import org.apache.soap.encoding.SOAPMappingRegistry;
import org.apache.soap.rpc.Call;
import org.apache.soap.rpc.Parameter;
import org.apache.soap.rpc.Response;
import org.apache.soap.util.xml.QName;
public class GetPersonClient {
    /** Creates a new instance of GetPersonClient */
    public GetPersonClient() {
    public static void main(String[] args) {
        SOAPMappingRegistry registry = new SOAPMappingRegistry();
        PersonSerializer personSerializer = new PersonSerializer();
        // Map the types.
        registry.mapTypes(Constants.NS_URI_SOAP_ENC, new QName("urn:person", "person"), Person.class, personSerializer, personSerializer);
// Build the call.
        Call call = new Call();
        call.setSOAPMappingRegistry(registry);
        call.setTargetObjectURI("urn:PersonService");
        call.setMethodName("getPerson");
        call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
        Response response;
        try {
           response = call.invoke(new URL("http://localhost:8090/soap/servlet/rpcrouter"), "");
        } catch (SOAPException e) {
            System.err.println("Caught SOAPException: " + e.getMessage());
            e.printStackTrace();
            return;
        } catch (MalformedURLException ex) {
            ex.printStackTrace();
            return;
        if (!response.generatedFault()) {
            Parameter parameter = response.getReturnValue();
            Person person = (Person)parameter.getValue();
            if ( person != null ) {
                System.out.println( person.firstName + " " + person.lastName );
        } else {
            Fault fault = response.getFault();
            System.err.println("Generated fault: ");
            System.out.println(" Fault Code   = " + fault.getFaultCode());
            System.out.println(" Fault String = " + fault.getFaultString());
}if someone could help me i would be grateful.
cheers
nmc

Is the problem in your 'marshall' method? You seem to be using Integer.class instead of String.class for the 'lastName' parameter...

FormCentral for Acrobat and Muse Themes Collaboration.

It would be nice if FormCentral for Acrobat and the Muse Themes did a collaboration on the forms widget, that way all of the features that are missing on the forms widget such radio buttons and upload images and documents features that everyone so desperately wants, will be easy to integrate. Just a suggestion!

I am having a simular issue.
First off we are not oinstalling Muse as it does not support bulk installs yet. It requires an Adobe login to use which just does not fly with our deployment setup.
As for Acrobat you have to make your own MSP file to shut off its updater. Search for a program called "Adobe Customization Wizard XI". This will let you create your own MSP file setting company and user names, shutting off the updater, disabeling the EULA, ect. Just save the MSP file and refference that new one instead of the default one you are told to use in the ExceptionInfo.txt file.
It seems that anything you set in the CCP only changes settings for the main CC install package. It changes nothing for any program that is thrown in the 'Exceptions' folder.
As for Lightroom this is the bulk of my issues. I have no idea how to shut Lightroom's updater off for all users. Nor to I know how to 'patch' Lightroom and have it not present you with language selection and SHOWING OUR SERIAL during first launch. http://forums.adobe.com/message/5709485#5709485
Hope this helps with some of your issues.

Attachments: I am creating an online application for employment and need applicant o submitt credentials, Is thier a way they can attach docs to the application?

Attachments: I am creating an online application for employment and need applicant o submitt credentials, Is thier a way they can attach docs to the application?

Hi Syclopz88,
You can use 'File Attachment' option in the form which will allow the user to attach documents to the application.

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

Creating a custom dictionary for Acrobat and Reader.

Similar Messages

Maybe you are looking for