Creating a custom display for data

Hi all!
Is there a way to create a field which is divided by lines in separate blocks along the horizontal and vertical axis. The amount of horizontal and vertical blocks can be set in the program.
I want to give my separate blocks a color depending on my data. Is there anyone who could help me? Thanks in advance!

And what about an intensity chart, you can draw all kind of colors just by changing the value of a pixel and the pixel size is determined by the array.
Eventually you could use more pixels for one block or even add lines by showing the grid.
greetings from the Netherlands

Similar Messages

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a "Custom Color" for highlighting? (Acrobat XI)

March 10, 2014
How to create a "Custom Color" for highlighting? (Acrobat XI)
The numbers in the RGB and other fields change as various numbers are changed.
I wanted to create a pale orange:
Hue               13      Red      255
Saturation   240      Green 177
Luminosity    86       Blue     140
I'd selected one of the orange squares in the color grid, to display the general orange area of the slider.
I moved the slider to select a pale orange, which generated the above numbers.   Since this wasn't directly available to save to a Custom Color, I tried to edit the numbers. Unfortunately, the other numbers changed, making it impossible to actually create a color.
Any suggestions would be appreciated.
Note: I used Techsmith's Snagit to show screen shots in a Word document.
When I attempted to browse and upload the file, the error message said "[The content type of this image is not allowed.]"
OK...what images *are* allowed?

Hi Don,
I saw Gilad answered your question in another forum post.
Do you have everything you need at this point?
Let me know if you need further assistance.
Kind regards, Stacy

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

How do we create a custom format for printed contact information?

We are trying to create a custom family directory for genealogical purposes. Family members are individually saved as Outlook 2010 contacts with a special number field that (when parsed) designates their generation, birth order,
and relationship to parents. The directory listing is by family and needs to indent names, addresses, emails, and other information by generation. In other words, children's names follow parent names and are indented. Likewise, grandchildren are
listed under their parents, but also indented from parents.
Do we need to create a custom display form, some type of custom print template, or do we need to program a merge of some sort? Any help would be appreciated.

Hi,
From the description, you want to print the contacts in Outlook using a custom display form, so that you can use it to create a custom family directory, correct?
If this is the case, I'm afraid there is no direct way to print forms as they appear on the custom display form. Outlook can only print forms with the options that are available in the Print window. While you can customize the Print Style settings using
the various options Outlook provides in its user interface, you cannot alter the basic way that Outlook prints by using custom Print Styles.
To work around this limitation, you can either use another program to print Outlook information, or you can download a ActiveX control or Outlook extension to create a custom form printing solution.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Create 1 customer master for some small customer

Hi All,
Our company have some small customer, sometime they buy our goods (may be they buy only one time). So we want create 1 customer master for them. Can we do it?

Dear ngocvt,
Transaction Code: V-07 - Create a one-time customer. (Account Group - CPDA)
One time customer / vendor accounts in SAP means they are account groups for customer/vendor and where in only the general data of the customer / vendor are stored instead of maintaining the bank data and other company code data that are relevant for other account groups which are useful for long run purposes.
As you know everything that is entered in SAP is saved in some TABLE. Now the customer & vendor master is such a table which holds vast amount of data.
The business secenario where the vendor or customer which are being in system only for 1 transaction, it is not advisable to have all the data maintained in main master.
Therefore SAP has provided with the feature of One time vendor / customer wherein in the document entry stage only you have to enter the name, address and other details of the vendor/customer.
The data, as far as I know' remains at doc level and does'nt go to the master tables.
If you want to change the standard functionality then go to
Transaction OBD2, u will find CPDA, that is standard one one time customer account group.
Copy it and make necessary changes.
Hope this Helps.
Thanks
Murtuza

Creating a custom scale for current

Hi guys,
I need some help with creating a custom scale. I am reading motor current (analog I/P) and would like to display that on a graph and write it to a file. I need to use a linear scaling for custom scale. The slope is 2 and the intercept is 0. I've attache the code to make it clear what I am trying to acomplish. The way I've set it up right now is no scaling. There are 2 tasks in the code. I would like to create a custom scaling for the first task as seen in the attached code. I have done custom scaling using DAQ Assistant Express VI. But I dont see such options when I try to do the same with the DAQmx task. Please let me know how this can be done. Any help is greatly appreciated.
Thanks,
Raj
Solved!
Go to Solution.
Attachments:
Current_Voltage_RPM-_sub_VI-1.vi ‏18 KB

You both had me going nuts trying to figure how to get to that property. Basically just right click the DAQmx property node and "Select filter..." . This brings up the "Configure Filter Settings" where I chose 'show all attributes'. I could then get to the AI Custom Scale Name property.
Interestingly when you use the Property Browser and select the magnifying glass you can get to that property...but you just can't select it if you have the filter set incorrectly. Lesson Learned.
I also found this community example and that one.
Using LabVIEW 2010SP1 and TestStand 4.5

How can I create a custom dock for all users?

Hello,
I would like to create a custom dock for everyone that uses a certain Mac. I have found a bunch of stuff, but it is outdated. Most of the tutorials are for 10.4 or 10.5. I am using 10.7.4 and I have found nothing regarding that. Can anyone point me in the right direction?
Thanks in advance

Hello,
I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
Thanks

Create electronic-digital signature for data

Hello
As possible create electronic-digital signature for data, referred through HTTP form internet explorer?
Thank you very much for your support.

George,
Thank you for your submission. It was helpful. This allowed me to create the signature block without having to place my own digital signature in the block. However, when I send it to my client (who has Adobe Reader but not Acrobat) she is unable to input her digital signature … I’m now half-way there but I continue to pursue a solution.
Dave Armstrong
============

I am getting ready to sell a Mac app and I want to know what the specs are to create a custom background for my Mac App?

I am getting ready to sell a Mac app and I want to know what the specs are to create a custom background for my Mac App?
Here is a good example of what I am talking about: https://docs.google.com/file/d/0B28kNqQ8gmifRjRHam9wVnlrWG8/edit?usp=sharing

You need to post your question in the Apple Developer Forums

Using Apache Commons HTTPClient to create a custom socket for Java mail

Does anyone know how to use Apache Commons HTTPClient to create a custom socket for Java mail. This is necessary for me to use NTLM authentication

JavaMail doesn't use HTTP.
If you want to add support for NTLM authentication to one of the standard protocols,
your best bet is to create a SASL provider, although note that only JavaMail's IMAP
provider uses SASL currently. The other protocols should add SASL support, but that
hasn't been done yet.

How to create a custom variable for a Label?

i need my label to store a string variable in it, do you know i can create a custom variable for it.
i mean for example if it's name is "StoredString" i can access it in my code by "label1.StoredString" just like "Label1.text" or something like that.

Thanks for pvdg42's help.
Hi soorena12,
Based on your issue, I suggest you can try the pvdg42's suggestion check your issue in your side.
If it still could not help you solve this issue, I suggest you can tell me which kind of application you create the label in the VS IDE?
What language you use to create for your application?
If you have any update message about your issue, please tell us.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating a Custom Task for an external application

Hi
I want to create a custom task for our records management system, that just opens a particular file people use from within Incident Management every day.
The file is of extension .tr5 (which is our records management tool). I can open the file on my desktop. When I create the custom task, using the same file - I get a message ' The specified executable is not a valid Win32 application'
I can open the application fine using the custom task, but not the file.
Could it because there is no relationship from SCSM to the file type?
Any suggestions are appreciated.

Are you using the executable exe file and the filename as a parameter in the custom task?
Andreas Baumgarten | H&D International Group

Creating a custom serializer for SOAP

Hi guys, i'm wondering if someone could help me. I'm trying to create a custom serializer for a class with SOAP and I'm geeting the following SOAPException:
Fault Code = SOAP-ENV:Server.Exception:
Fault String = org/apache/soap/util/xml/Serializer
I'm able to deploy the service with no problems.
I'm using a very simple example in which I'm only trying to get a Person class from the service. here is the deployment descriptor:
<isd:service xmlns:isd="http://xml.apache.org/xml-soap/deployment" id="urn:PersonService">
<isd:provider type="java"
                scope="Application"
                methods="getPerson">
    <isd:java class="app.PersonService" static="false"/>
</isd:provider>
<isd:faultListener>org.apache.soap.server.DOMFaultListener</isd:faultListener>
<isd:mappings>
    <isd:map encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
             xmlns:x="urn:person"
             qname="x:person"
             javaType="app.Person"
             java2XMLClassName="app.PersonSerializer"
             xml2JavaClassName="app.PersonSerializer"/>
</isd:mappings>
</isd:service>here is the PersonService.java:
package app;
public class PersonService {
    /** Creates a new instance of GetPerson */
    public PersonService() {
    public Person getPerson() {
        return new Person("joe", "something");
}here is the Person.java:
package app;
public class Person {
    public String firstName;
    public String lastName;
    /** Creates a new instance of Person */
    public Person() {
    public Person(String firstName, String lastName) {
        this.firstName = firstName;
        this.lastName = lastName;
}here is the PersonSerializer.java:
package app;
import java.io.IOException;
import java.io.Writer;
import org.apache.soap.encoding.soapenc.SoapEncUtils;
import org.apache.soap.rpc.Parameter;
import org.apache.soap.rpc.RPCConstants;
import org.apache.soap.rpc.SOAPContext;
import org.apache.soap.util.Bean;
import org.apache.soap.util.StringUtils;
import org.apache.soap.util.xml.DOMUtils;
import org.apache.soap.util.xml.Deserializer;
import org.apache.soap.util.xml.NSStack;
import org.apache.soap.util.xml.QName;
import org.apache.soap.util.xml.Serializer;
import org.apache.soap.util.xml.XMLJavaMappingRegistry;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
public class PersonSerializer implements Serializer, Deserializer {
    /** Creates a new instance of PersonSerializer */
    public PersonSerializer() {
    public void marshall(String string, Class aClass, Object object, Object object0, Writer writer, NSStack nSStack, XMLJavaMappingRegistry xMLJavaMappingRegistry, SOAPContext sOAPContext) throws IllegalArgumentException, IOException {
        nSStack.pushScope();
        SoapEncUtils.generateStructureHeader(string, aClass, sOAPContext, writer, nSStack, xMLJavaMappingRegistry);
        writer.write(StringUtils.lineSeparator);
        Person person = (Person)object;
        String firstName = person.firstName;
        String lastName = person.lastName;
        xMLJavaMappingRegistry.marshall(string, String.class, firstName, "firstName", writer, nSStack, sOAPContext);
        writer.write(StringUtils.lineSeparator);
        xMLJavaMappingRegistry.marshall(string, Integer.class, lastName, "lastName", writer, nSStack, sOAPContext);
        writer.write(StringUtils.lineSeparator);
        writer.write("</" + sOAPContext + '>');
        nSStack.popScope();
    public Bean unmarshall(String string, QName qName, Node node, XMLJavaMappingRegistry xMLJavaMappingRegistry, SOAPContext sOAPContext) throws IllegalArgumentException {
        Element root = (Element)node;
        Element childElement = DOMUtils.getFirstChildElement(root);
        Person target;
        try {
            target = (Person)Person.class.newInstance();
        } catch (Exception e) {
            throw new IllegalArgumentException("Problem instantiating bean: " + e.getMessage());
        while(childElement !=null) {
            Bean paramBean = xMLJavaMappingRegistry.unmarshall(string, RPCConstants.Q_ELEM_PARAMETER, childElement, sOAPContext);
            Parameter param = (Parameter)paramBean.value;
            String tagName = childElement.getTagName();
            if(tagName.equals("firstName")) {
                target.firstName = (String)param.getValue();
            } else if(tagName.equals("lastName")) {
                target.lastName = (String)param.getValue();
            childElement = DOMUtils.getNextSiblingElement(childElement);
        return new Bean(Person.class, target);
}and finally here is the client app class that calls the service, the GetPersonClient.java:
package app;
import java.net.MalformedURLException;
import java.net.URL;
import org.apache.soap.Constants;
import org.apache.soap.Fault;
import org.apache.soap.SOAPException;
import org.apache.soap.encoding.SOAPMappingRegistry;
import org.apache.soap.rpc.Call;
import org.apache.soap.rpc.Parameter;
import org.apache.soap.rpc.Response;
import org.apache.soap.util.xml.QName;
public class GetPersonClient {
    /** Creates a new instance of GetPersonClient */
    public GetPersonClient() {
    public static void main(String[] args) {
        SOAPMappingRegistry registry = new SOAPMappingRegistry();
        PersonSerializer personSerializer = new PersonSerializer();
        // Map the types.
        registry.mapTypes(Constants.NS_URI_SOAP_ENC, new QName("urn:person", "person"), Person.class, personSerializer, personSerializer);
// Build the call.
        Call call = new Call();
        call.setSOAPMappingRegistry(registry);
        call.setTargetObjectURI("urn:PersonService");
        call.setMethodName("getPerson");
        call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
        Response response;
        try {
           response = call.invoke(new URL("http://localhost:8090/soap/servlet/rpcrouter"), "");
        } catch (SOAPException e) {
            System.err.println("Caught SOAPException: " + e.getMessage());
            e.printStackTrace();
            return;
        } catch (MalformedURLException ex) {
            ex.printStackTrace();
            return;
        if (!response.generatedFault()) {
            Parameter parameter = response.getReturnValue();
            Person person = (Person)parameter.getValue();
            if ( person != null ) {
                System.out.println( person.firstName + " " + person.lastName );
        } else {
            Fault fault = response.getFault();
            System.err.println("Generated fault: ");
            System.out.println(" Fault Code   = " + fault.getFaultCode());
            System.out.println(" Fault String = " + fault.getFaultString());
}if someone could help me i would be grateful.
cheers
nmc

Is the problem in your 'marshall' method? You seem to be using Integer.class instead of String.class for the 'lastName' parameter...

Creating a custom display for data

Similar Messages

Maybe you are looking for