Creating a dynamic operator in Office analysis

Hello All,
Is it possible to bring operators(=; =>;<= etc) in Analysis report (not referring to variants in Query Designer)? I often come across requirements where the user would want a operator on Date field or sales numbers etc. these are often temporary ad hoc reports and making changes to the Bex queries does not makes a lot of sense in the long run. It would be beneficial for the business to have a Analysis level solution like some kind of Function or formula that can narrow down their search results as per their requirements.
Please let me know if i was not elaborate enough to communicate the scenario over, I can explain more.
Thanks
Gaurav

What is the business requirement behind this not using the BEx query?
Variants are not required
BEx variables in the BEx query come over as Prompts in Analysis Office and you have the operators

Similar Messages

Create new dynamic distribution group as filter office location

Hi
I want to create new dynamic distribution group as filter office location. So I would like to request you please suggest the script through Power shell or graphical interface.
In case you need more clarification please revert back.
Regards
Md Ehteshamuddin khan

If you don't use OUs to separate your users and use the 'Office' field in Active Directory you can create Dynamic lists for this property as well.
The Office field, which stores its information in the physicalDeliveryOfficeName attribute of the object, can be referenced to create a list by using this PowerShell command:
New-DynamicDistributionGroup -Name <LIST NAME> -RecipientFilter {office -eq '<OFFICE NAME OR LOCATION>'} -RecipientContainer '<LOCATION OF USERS ALLOWED IN THE LIST>' -OrganizationalUnit '<LOCATION OF WHERE LIST WILL BE STORED IN ACTIVE
DIRECTORY' -Alias 'LIST ALIAS'
Tested and verified with Exchange 2010

How to create Exchange dynamic distribution list using multivalue extension custom attribute

I am trying to create a dynamic distribution list using an ExtensionCustomAttribute. I am in hybrid mode with Exchange 2013. The syntax I have is this:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')}
This works correctly on-prem. But hosted always results in an empty list. I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.
If anyone has any suggestions I would appreciate it.

I don't think I provided enough information about the problem. Let me add some and see if it makes sense.
I have an Exchange 2013 on-premise configured in hybrid mode with Office365. For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud. Each of them has CustomAttribute6 = 'Y'
and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
Using on-prem Exchange powershell, I run the following command:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them as follows:
$DDG = Get-DynamicDistributionGroup DG_NH
Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
Replaying the query above, I can see this also works fine and finds my two users.
Next I open a new powershell and connect to Office 365 and repeat the process there.
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them.
And then delete the group and recreate it using the multi-value attribute:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
When I run the query this time it produces no result. Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud. If I use single valued attribute, it works fine.
I really need to be able to get multi-valued DDG's working in the cloud. If anyone has done this and has any suggestions, I would appreciate seeing what you did. And if this is the wrong forum to port this, if you can point me to a more suitable
forum I will report there.
Thanks,
Richard

Create a dynamic attribute for each user

Hi All,
I request you all to let me know how to give an approach to the following requirement.
REQUIREMENT: I have to create a dynamic attribute in UME for each user and the read the attribute on lead selection of a table having list of Users.
                         On lead selection, the dynamic attribute value should be either true or false. Based on this value the rest of the application specific operations wil be taken care.
                          If a particular User does not have the dynamic attribute associated to it, then we need to create the same.
Looking forwarrd for your help.
Regards
Dipendra

//@@begin javadoc:UMSavePropertiesByNode()
     /** Declared method. */
//@@end
public boolean UMSavePropertiesByNode( )
    //@@begin UMSavePropertiesByNode()
          try {
               if (wdContext.currentUserDataElement().getVaIUserMaint().setAttribute("com.sap.security.core.usermanagement", this.getUMPropertyName(null) + ".TableColumns", this.getPropertiesByNode())) {
                    wdContext.currentUserDataElement().getVaIUserMaint().save();
                    wdContext.currentUserDataElement().getVaIUserMaint().commit();
                    msg.reportMessage(IMessageTableUtilsComponent.UMPROPERTY__SAVE__FIELDS__SUCCESS, null, false);
          } catch (UMException ex) {
               wdContext.currentUserDataElement().getVaIUserMaint().rollback();
               msg.reportMessage(IMessageTableUtilsComponent.UMPROPERTY__SAVE__FIELDS__ERROR, null, false);
               return false;
          return true;
    //@@end
//@@begin javadoc:UMLoadFieldsProperties()
     /** Declared method. */
//@@end
public petrobras.com.br.classes.FieldsTable UMLoadFieldsProperties( petrobras.com.br.classes.FieldsTable fields )
    //@@begin UMLoadFieldsProperties()
          String properties[] = wdContext.currentUserDataElement().getVaIUserMaint().getAttribute("com.sap.security.core.usermanagement", this.getUMPropertyName(null) + ".TableColumns");
          if (Compare.getLenght(properties) > 0) {
               //msg.reportWarning("[UMLoadFieldsProperties]: properties.length = " + properties.length);
               for (int i = 0; i < properties.length; i++) {
                    int attrPos = Integer.parseInt(properties<i>.substring(properties<i>.indexOf("(") + 1, properties<i>.indexOf(")")));
                    String attrName = (String) properties<i>.substring(properties<i>.indexOf(")") + 1, properties<i>.indexOf("="));
                    int attrValue = Integer.parseInt(properties<i>.substring(properties<i>.indexOf("=") + 1, properties<i>.indexOf(";")));
                    Field item = fields.getField(attrName);
                    if (item != null) {
                         item.setPosition(attrPos);
                         item.setVisibility(WDVisibility.valueOf(attrValue));
                         fields.removeFieldByName(attrName);
                         fields.addField(item);
          return fields;
    //@@end
regards,
Angelo

How do I create a Dynamic PDF in ColdFusion

I am using ColdFusion CS4 and I need to create a dynamic PDF certificate for the user when they finish a short test.
Their name is in a session var and should dynamically enter in to the Name field of the certificate as well as the date.
The user can print The PDF certificate, which must be protected to Allow Print only.
I have a PDF created in Adobe Lifecycle Designer. This contains all the data and a text field Name and Data that needs the dynamic input from ColdFusion.
<cfpdfform action="populate" source="certificate.pdf">
      <cfpdfsubform name="form1">
            <cfpdfsubform name="page1">
                  <cfpdfformparam name="employeeName" value="John Hollings" />
                  <cfpdfformparam name="date" value="#dateformat(now(), 'dd mmmm, yyyy')#" />
                  <cfpdfformparam name="submitURL" value="#CGI.SCRIPT_NAME#" />
                  </cfpdfsubform>
      </cfpdfsubform>
</cfpdfform>
Thsi work but the PDF textFields are open to edit, I need to lock down the PDF so only printing can operate...
No Copy of data
No Saving the file (if possible)
Only print and close

act332 wrote:
If I make a form in Adobe Pro9 it opens Lifecycle and I am back there.
Unfortunately, I am not using Acrobat 9/LiveCycle. So I cannot really provide any specifics there. For usage questions, you might try asking on the Acrobat/LiveCycle forums.   But from CF's perspective, the key is the form's _format_. Acrobat (AcroForms) and LiveCycle forms are two totally different formats internally. (Like MS Office 2007 files versus MS Office 2003 files). To flatten a form from CF, it must be an AcroForm:
http://www.planetpdf.com/article.asp?ContentID=adobe_live_cycle_designer_and_acrobat_pdf_f orms_under_the_hood&page=1
act332 wrote:
I am trying to allow a user to print a document (certificate) with their name and date dynamically inserted, this document
Well as I mentioned, you can use cfpdf or ddx to set whatever permissions you need. The default is "All" (ie all actions are allowed) but you can restrict the permissions by passing in a list of which permissions _should_ be allowed. Anything not included in the list will be restricted.
<cfpdf permissions="None" ...>   OR
<cfpdf permissions="AllowPrinting" ...> OR
<cfpdf permissions="AllowPrinting,AllowCopy" ...> OR

Help me to achieve my goal: creating a dynamic CQ5 website from a CRX Imported Site

Hello everyone.
For two weeks now, i'm trying to create a dynamic content CQ5 website from an imported CRX site.
What I already did and where I am now:
Step 1 - I have imported a website using the CRX Import Site tool.
Step 2 - I have done some mappings in my imported site images and texts. In the CRX content repository estructure, I can found the mappings as
unstructured nodes, at "etc/designs/mysite/dev/mappings", the component properties matching the components I selected in the component extractor;
Step 3 - I have done some extractions in my imported site images and texts. In the CRX content repository estructure, I can found the extracted components
at "apps/mysite/resources/images" (the last two ones I created myself);
Step 4 - After done all these steps, I acessed the Web Sites CQ5 menu and selected the "New Site" option, in the "New..." button. A "MySite Blueprint" is avaliable
to be selected as a Blue Print to my new site, but If I select this one and create my new site, not all the mapped components can be manipulated or selected and some
mappings just show on as an empty selection box in the page, where I am able to insert images, for exemple.
In short, after all these steps, I still can't do what I want with my mapped components and the new site is, basically, the same as the imported. Not every mapped components can be selected and edited and I can't change my site template or content (the far I got here is add a new image in the site, but without the liberty to change the position).
So, what I'm forgetting? Is there some step that I don't getting through? Maybe I need to work on the template created by the site importer?
Is there some material or media that can help me or maybe add knowledge to me?
Already read the "Site importer" and "Components" in Adobe CQ5 Documentation but don't get me far from where I am now.
If someone can help me to make this process better, with more liberty on my new site and the possibility to control all the components, adding new ones
or editing the existent ones, I'll be very gratefull and with a great new knowledge.
Operational System: Windows Server 2008
CQ Version: CQ 5.4.0.20110218
Thanks.

I want to do this using the site importer because I want to show my clients how we can make content management and experience customizations a lot easier starting by their own websites.
So, importing my customer website and transforming it in a new CQ website is the way to show this.
Anyway, thanks in advance and I'm going to look at the page component for the website that I imported.
If someone got another tip or hint, I'll be very thankfull.

How to create a dynamic group to fetch "Managers" for members of another group?

Hi
We have a request to created 2 dynamic group. One group with all india employees and another group will managers of all india emnployees [Manager who may be out of india as well].
We created first group. But 2nd group failed for below filter
                             "/Person[ObjectID = /*[ObjectID = '9b3009a1-0e24-4d43-bc9e-9f7a46910f0d']/ComputedMember]/Manager"
We could get appropriate results while running the query from powershell script.  But failing when trying to update the group filter.
We are getting below error while creating this criteria\dynamic group
Please help provide solution.
Microsoft.ResourceManagement.Service: System.InvalidOperationException: Operation is not valid due to the current state of the object.
   at Microsoft.ResourceManagement.FilterEvaluation.Language.MembershipCondition.Create(QueryFilter queryFilter, Int32[]& membershipConditions)
   at Microsoft.ResourceManagement.ActionProcessor.FilteredResourceActionProcessor.FilteredResourceActionProcessHelper.DoPreProcessRequest(RequestType request)
   at Microsoft.ResourceManagement.ActionProcessor.FilteredResourceActionProcessor.PreProcessRequestFromAttribute(RequestType request)
   at Microsoft.ResourceManagement.ActionProcessor.ActionDispatcher.PreProcessRequestFromAttribute(RequestType request)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(CreateRequestDispatchParameter dispatchParameter)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean
isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, Boolean maintenanceMode, String synchronizationSequenceIdentifier)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean
isChildRequest, Guid cause, Boolean doEvaluation, String synchronizationSequenceIdentifier)
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Create(Message request)
Aswathy Raj

<Going through old threads>
Look at the Unsupported Filter Definitions list here:
http://blog.msresource.net/2011/10/06/set-and-group-criteria-filters/
http://technet.microsoft.com/en-us/library/ff356871(v=ws.10).aspx
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Create a dynamic query with or/and

Hello!
Please help to accomplish the following:
User needs to create a dynamic query.
There are few select lists: sex, race, state …
User selects whatever he needs from select lists, which would become the first part of the “where clause” – i.e. (sex = ‘M’ AND state = ‘NY’).
Then the user wants to add an additional condition using “OR/AND” – i.e. i.e. (sex = ‘M’ AND state = ‘NY’) OR (sex = ‘F’).
I have been able to build the first clause and pass to a variable. I need to be able to clear the values in the select lists, but keep the value stored in the variable, and then append each new clause to the variable. This needs to be event driven by an item on the page.
Any help is appreciated.
Thank you in advance.

Hi,
At that point my application works fine.
But I need to add ability to clear select lists and enter a new condition with 'OR'
operator.
The final SQL statement should look:
select employee_id, name from employee_v where (sex = ‘M’ AND state = ‘NY’) OR (sex = ‘F’)
Thank you.

Error while creating PO in operation subcontracting

I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR

Create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box

HELP!!! Can anyone please provide some guidance on how to create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box.
I have a form which – based on the department that's selected from a drop-down box – will have different form fields/text boxes, etc, made available.
Is this possible in LiveCycle, if so, can you please provide the script/info - as needed.
Thanks,

In the preOpen event of the second dropdown list you put something like (in formCalc):
if (dropdown1 == 1) then
$.clearItems()
$.setItems("Year, 2 Year, 3 Year")
elseif (dropdown1 == 2) then
$.clearItems()
$.setItems("3 Year, 4 Year")
endif

How to create a dynamic RTF report which creates dynamic columns based on dynamic column selection from a table?

Hi All,
Suppose I have table, whose structure changes frequently on daily basis.
For eg. desc my_table gives you following column name on Day 1
SQL > desc my_table;
Output
Name
Age
Phone
On Day 2, two more columns are added, viz, Address and Salary.
SQL > desc my_table;
Output
Name
Age
Phone
Address
Salary
Now I want to create an Dynnamic RTF report which would fetch data from ALL columns from my_table on daily basis. For that I have defined a concurrent program with XML as output type and have attached a data template/data definition to it which takes in XML as input and gives final output of conc program in EXCEL layout. I am able to do this for constant number of columns, but dont know how to do it when the number of columns to be displayed changes dynamically.
For Day 1 my XML file should be like this.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
</group>
</dataStructure>
</dataTemplate>
And my Day 1, EXCEL output from RTF template should be like this.
Name     Age     Phone
Swapnill     23     12345
For Day 2 my XML file should be like this. With 2 new columns selected in SELECT clause.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
,Address
,Salary
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
<element name="Address" value="Address" />
<element name="Salary" value="Salary" />
</group>
</dataStructure>
</dataTemplate>
And my Day 2, EXCEL output from RTF template should be like this.
Name     Age     Phone     Address     Salary
Swapnill     23     12345         Madrid     100000
Now, I dont know below things.
Make the XML dynamic as in on Day 1 there must be 3 columns in the SELECT statement and on Day 2, 5 columns. I want to create one dynamic XML which should not be required to be changed if new columns are added in my_table. I dont know how to create this query and also create their corresponding elements below.
Make the RTF template dyanamic as in Day1 there must 3 columns in EXCEL output and on Day 2, 5 columns. I want to create a Dynamic RTF template which would show all the columns selected in Dynamic XML.I dont know how the RTF will create new XML tags and how it will know where to place it in the report. Means, I can create RTF template on Day 1, by loading XML data for 3 columns and placing 3 XML tags in template. But how will it create and place tags for new columns on Day 2?
Hope, you got my requirement, its a challenging one. Please let me know how I can implement the required solution using RTF dynamically without any manual intervention.
Regards,
Swapnil K.
Message was edited by: SwapnilK

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

How to create the dynamic report

Hi,
please help me, how to create the dynamic report

Hi,
Try this..
DATA: p_temp(30) TYPE c DEFAULT 'ZTEST_REPORT'.
TYPES: BEGIN OF t_abapcode occurs 0,
        row(72) TYPE c,
       END OF t_abapcod.
T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'WRITE: / ''TEST REPORT''. '.
APPEND T_ABAPCODE.
INSERT REPORT p_temp FROM it_abapcode.
      SUBMIT (p_temp) AND RETURN.
      DELETE REPORT p_temp.
Thanks,
naren

How to create a dynamic hyperlink which point to a BLOB column

Hello,
I am fighting with the issue for about 2 days.
My purpose is to use Oracle Report Builder to build a report of our employee directory which contains employee's information and also employee's picture. The requirement is that our report is going to generate a html file to our web server. By creating a dynamic hyperlink to the Employee's name in the report output file (the html file generated to our web server), it should then display the corresponding employee's picture which is a BLOB column stored in our oracle database.
I only can create the hyperlink for the employee's name if the link is static, like 'http://www.google.com
But from the Oracle Reports 10g Release2 (10.1.2), about the exmaple 1: Dynamic hyperlink, I refered the link
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwcontxt%7Cprops%7Cpi_lay_hyperlink%7Ehtm/
The link gave he following example shows a value for the Hyperlink property that specifies a link to a destination identified dynamically:
'DEPT_DETAILS_' || LTRIM(TO_CHAR(:DEPTNO))
where :DEPTNO is a column value retrieved from the database at runtime.
I tried as the same way to want it dynamcially shows the column :EMP_PHTOT, which is one BLOB column, but it was failed.
Anyone knows how to implement this? Any inputs is appreciated!
Thanks,
Jing

This forum is for the SQLDeveloper tool. You might get better responses on the reports forum Reports

How to create a dynamic form with bind variables :schema & :table_name

My application has two LOV's, one to select a schema, and the next to select a table within that schema. I then have a button which passes me to a report which displays the data in that table.schema.
I now want to create a link to a form where I can edit the record based on the rowid of that table.schema, but it doesn't appear that I can create a dynamic form where I pass the schema.table_name and rowid. Is this possible? Can anyone advise how I can do this? The form builder only wants a fixed schema/table name.
Thanks in advance.
Stuart.

Hi Stuart,
In this sort of situation, you will need to be a bit creative.
I would suggest a pipeline function called as if it was a report.
Then you can pipe out the required fields.
Since you will have a variable number of fields, you could use two of the multi row field names for your field names and values.
Then after submit, you can create your own procedure to loop through the fields (stored for you in the Apex package) and update the table as required.
Not very specific I'm afraid, but it should work.
Regards
Michael

How to create a dynamic action from link column in classic report

I Have an apex page that display a modal window utilizing jquery. In the modal window I have a classic report with a link column that I want to capture its click event.
I was thinking I could create a dynamic action with selection type=jquery selector. Not for sure if I need to do anything on link column and do not know the syntax
for jquery selector. Would appreciate any help or direction???

Thank you for your response. I am very new to Jquery so don't understand all that well.
What I did:
I created a dynamic action
Event: Click
Selection Type: jQuery Selector
jQuery Selector: tdheaders
Created True Actions
I created an alert to see if this is being executed.
Alert 'I made it here'
What I have:
I created a report region with the following query:
Select empno, ename, 'SELECT' from emp
where (ename like '%'||ltrim(rtrim(:P2_SEARCHPU))||'%'
or :P2_SEARCHPU is null)
I created 'SELECT' column as Link Column
Report Attributes
Link Text Select
Target Page in this Application
Page 2
Region Header
<div id="ModalForm2" title="Employee List" style="display:none">
Region Footer
</div>
This report is displayed in a modal form when a button is clicked.
Code for modal window in Page Header
<script type="text/javascript">
$( function() {
$('#ModalForm2').dialog(
{ modal : true ,
autoOpen : false ,
buttons : {
Cancel : function() {
closeForm2();
function openForm2()
$('#ModalForm2').dialog('open');
function closeForm2()
$('#ModalForm2 input[type="text"]').val('');
$('#ModalForm2').dialog('close');
</script>
I am trying to capture the click event on the link column of the report in the modal form. I want to pass a couple of column values
back to the main form and close the modal window. I do not want to do the submit that happens if I click on the link column and link back to the main page(2)
If I let the submit to happen, all other entered fields are cleared on my main form.
Just don't understand the jQuery selector. I have no problem catching the button clicks on the modal form.

Creating a dynamic operator in Office analysis

Similar Messages

Maybe you are looking for