Creating a folder results in "no space left on device"?
Hi again,
today I encountered the following problem: trying to create a folder on one of my Xsan volumes resulted in a "no space left on device" error, although there are still 3.81 TB available.
I also tried copying a disk image of 160 MB to the volume which failed as well. Copying a plain file of 256 MB which I created using dd went just fine.
Creating a folder from the terminal resulted in an error, too.
Any hints anyone?
Thanks,
Stephan
But what I don't get is why a single flat file can be still copied to the volume. Does a folder need "more" meta-data than a flat file?
Theoreticaly an interesting question. (which I do not have the answer for). In your situation I would focus on the full pool problem.
Probably your volume setting for storage allocation is still at the default "round robin". When you added a new pool you should have put it at "Balance". You still should do it now.
After that, you take some material which is on the full pool. Later you put it back. It should go to the most empty pool now.
There are also ways from the snfsdefrag command to accomplish this. Please read the manpage.
Similar Messages
-
The process gets to the NIVISA\SETUP.INI step, then I get this error.
I've tried with installing the MDAC and not, and it happens both times.
The drive I'm trying to create the file to has 7.4GB open on it, so I'm not sure why this is happening.
Thank you,
Dave NeumannDave,
This is documented in the KnowledBase 2D6A63VW titled: "Error: Could Not Create Temporary File, No Space Left on Device".
As RByrd suggested, you might need to free up some memory space in your System Temp directory, OR you may change the location of your System Temp directory to one with more space (such as the directory where you want the TestStand Engine files to be saved). The Knowledbase shows how to do this step by step. This is its URL:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/46f99e55650d8d5b86256ac00059018e?OpenDocument
Regards,
Carlos Leon -
Attempting to upgrade some packages from AUR and it failed ! This is a long one .
[wesley@ratdog ~]$ yaourt -Syu --aur
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
archlinuxfr is up to date
archrepo is up to date
compiz-fusion is up to date
arch-games is up to date
==> Searching for new version on AUR
afsp: up to date
alkitab: up to date
arachnophilia: up to date
archlinux-themes-gdm: not found on AUR
bash-docs: up to date
bin32-jre: 6u17-1 => 6u18-1
bin32-xnview: up to date
bpython: 0.9.5.2-1 => 0.9.6.2-1
burn-cd: up to date
cdw: 0.3.92-2 => 0.3.95-1
childsplay: up to date
clawsker: up to date
compiz-check: up to date
cope-git: (local=20100127-1 aur=20091228-2)
cronwhip: 2.0.1-2 => 2.0.1-3
cutemaze: up to date
dvdwizard: up to date
dwarffortress: v0.28.181.40d16-1 => v0.28.181.40d16-2
encode2mpeg: up to date
flashplugin-universal: 10.0.32.18-1 => 10.0.42.34-1
freefonts: up to date
freetype2-cleartype: up to date
gattax: up to date
geany-plugins: up to date
gimpfx-foundry: up to date
gnome-mplayer-svn: (local=1594-1 aur=1583-1)
gnome-specimen: up to date
goobox: 2.0.0-1 => 2.1.1-1
gstreamer0.10-farsight: up to date
gstreamer0.10-fluendo: up to date
gtkimageviewer: up to date
haskell-fgl: (local=5.4.2.2-2 aur=5.4.2.2-1)
imagination: up to date
jason-rohrer-games: up to date
lemonrip: up to date
lettergames: up to date
lib32-gstreamer0.10: up to date
lib32-gstreamer0.10-base: up to date
lib32-liboil: up to date
lib32-libpng12: up to date
lib32-libpps: up to date
lib32-libxp: up to date
lib32-printproto: up to date
lib32-sdl_image: 1.2.10-1 => 1.2.10-2
libjpeg7: up to date
libmimic: up to date
libpng12: up to date
libxml: up to date
linuxvideoconverter: up to date
markdown: up to date
megamario: up to date
mencoder: 29776-1 => 30146-1
mybashburn: up to date
nano-syntax-highlighting: up to date
nautilus-image-converter: up to date
nautilus-pastebin: up to date
nautilus-rename-exif-date: up to date
nautilus-sound-converter: up to date
ninvaders: up to date
nspluginwrapper: up to date
pacman_sdl: up to date
perl-class-inspector: up to date
perl-env-path: up to date
perl-file-sharedir: up to date
perl-io-stty: up to date
perl-params-util: up to date
perl-regexp-common: up to date
perl-text-upsidedown: up to date
perl-universal-require: up to date
petris: up to date
pidgin-sound: up to date
postr: up to date (0.12.3-1 flagged as out of date)
pyfloppy: up to date
python-nautilus: up to date
smplayer-svn: 3323-1 => 3409-1
stapler-git: (local=20091206-1 aur=20090809-1)
stargunner: up to date
touchmegames: up to date
transmission-svn: (local=9560-1 aur=8282-5)
ttf-ms-fonts-lic: up to date
ttf-tahoma: up to date
ttf-tiresias: up to date
tuxpaint-config: up to date
tuxpaint-stamps: 2008.06.30-1 => 2009.06.28-1
ultra-tic-tac-toe: up to date
xsane2tess: up to date
xvid4conf: up to date
xvidenc: up to date (8.1.7-1 flagged as out of date)
zathura-git: (local=20091215-1 aur=20090923-1)
Packages that can be updated from AUR:
bin32-jre bpython cdw cronwhip dwarffortress flashplugin-universal goobox lib32-sdl_image mencoder smplayer-svn tuxpaint-stamps
==> Do you want to update these packages ? [Y/n]
==> ----------------------------------------------
==>y
==> Resuming previous build
==> Downloading bin32-jre PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
Comment by: jryarch on Wed, 19 Nov 2008 20:49:15 +0000
I'm using it on swiftfox32 now, and runs flawless! Thanks.
Comment by: tzok on Thu, 27 Aug 2009 07:00:45 +0000
# $Id$
# Maintainer: webjdm <[email protected]>
pkgname=bin32-jre
pkgver=6u16
pkgrel=1
pkgdesc="32-bit Sun java with the new mozilla plugin for Arch x86_64"
arch=('x86_64')
license=('custom')
url="https://jdk6.dev.java.net"
depends=('lib32-glibc' 'lib32-libgl' 'lib32-libx11' 'lib32-libxtst' 'mozilla-common')
makedepends=('diffutils' 'fakeroot' 'pkgconfig')
install=jre.install
bin32name=jdk-${pkgver}-dlj-linux-i586
source=(http://download.java.net/dlj/binaries/${bin32name}.bin 'construct.sh' 'construct.patch')
md5sums=('0c9c81f8f0b85fd96a8db06d36b50b33'
'94065b612df0046d9ae758943f9f6a75'
'88ad70c4ee77f58d761225a59ab3b7d9')
build() {
cd ${startdir}/src
patch -p0 <construct.patch || return 1
chmod +x ${bin32name}.bin || return 1
mkdir -p unbundle-jdk
cd unbundle-jdk
LD_PRELOAD="" sh ../${bin32name}.bin --accept-license || return 1
cd ${startdir}/src
chmod +x construct.sh
LD_PRELOAD="" sh construct.sh unbundle-jdk linux-jdk linux-jre || return 1
mkdir -p ${startdir}/pkg/opt/${pkgname}
cp -r linux-jdk/jre ${startdir}/pkg/opt/${pkgname} || return 1
cd ${startdir}/pkg
# New java plugin in /opt/mozilla/lib/plugins
mkdir -p opt/mozilla/lib/plugins
ln -s /opt/${pkgname}/jre/lib/i386/libnpjp2.so opt/mozilla/lib/plugins/libnpjp2.so
Comment by: bruce on Fri, 16 Oct 2009 08:52:14 +0000
need to add lib32-libxi as a dep...
Comment by: doorknob60 on Sat, 21 Nov 2009 21:23:00 +0000
Add lib32-gconf to depends please. Otherwise firefox32 crashes when I load a Java applet with an wrong elfclass error.
Comment by: catalyst on Mon, 18 Jan 2010 16:25:32 +0000
where 6u18 ?
First Submitted: Sat, 26 Jul 2008 00:56:14 +0000
bin32-jre 6u18-1 : 32-bit Sun java with the new mozilla plugin for Arch x86_64
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>y
==> bin32-jre dependencies:
- lib32-glibc (already installed)
- lib32-libgl (already installed)
- lib32-libx11 (already installed)
- lib32-libxtst (already installed)
- mozilla-common (already installed)
- lib32-libxi (already installed)
- diffutils (already installed)
- fakeroot (already installed)
- pkgconfig (already installed)
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> WARNING: This PKGBUILD contains install file that can be dangerous.
bin32-jre.install
==> Edit bin32-jre.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of bin32-jre ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for bin32-jre:
==> Building and installing package
==> bin32-jre dependencies:
- lib32-glibc (already installed)
- lib32-libgl (already installed)
- lib32-libx11 (already installed)
- lib32-libxtst (already installed)
- mozilla-common (already installed)
- lib32-libxi (already installed)
- diffutils (already installed)
- fakeroot (already installed)
- pkgconfig (already installed)
==> Making package: bin32-jre 6u18-1 x86_64 (Sun Feb 7 18:31:20 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found jdk-6u18-dlj-linux-i586.bin in build dir
-> Found construct.sh in build dir
-> Found construct.patch in build dir
==> Validating source files with md5sums...
jdk-6u18-dlj-linux-i586.bin ... Passed
construct.sh ... Passed
construct.patch ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
patching file construct.sh
You will need atleast 267624 kBytes of Disk Free
Please free up the required Disk Space and try again
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build bin32-jre package.
Error: unable to update bin32-jre
==> Resuming previous build
==> Downloading bpython PKGBUILD from AUR...
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Error: unable to update bpython
==> Resuming previous build
==> Downloading cdw PKGBUILD from AUR...
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Error: unable to update cdw
==> Downloading cronwhip PKGBUILD from AUR...
tar: Record size = 8 blocks
Comment by: liquidsunshine on Tue, 14 Apr 2009 03:04:10 +0000
md5sums changed... is this out of date?
Comment by: liquidsunshine on Tue, 14 Apr 2009 03:07:28 +0000
Also, you might want to fix the line in the PKGBUILD that says:
pkgdesc="upload files to the AUR"
since it's not really accurate. =)
Comment by: Xyne on Wed, 15 Apr 2009 04:51:31 +0000
You just don't know about the hidden options :P
Sorry about the md5sum change. I've been updating nearly everything at once (refactoring, adding man pages, changing my build and upload scripts, changing the site backend, etc) and I haven't reached a stable point yet. Thanks for letting me know about it.
The funny thing is that I'm so tired right now and bouncing back and forth between so many things that I only saw the pkgdesc at first. I thought this was aurploader (where the desc came from) and thought you meant it should be "upload pkgs to the AUR" instead of "files"... and ended up discovering that they've changed the AUR submit form so I had to update aurploader (and fix all my package categories).
Comment by: liquidsunshine on Wed, 15 Apr 2009 04:57:36 +0000
Haha! Glad I helped you discover something then. I love the program by the way. It makes cron useful on a laptop! =)
First Submitted: Thu, 30 Oct 2008 22:41:42 +0000
cronwhip 2.0.1-3 : run missed cronjobs
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> cronwhip dependencies:
- perl (already installed)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
cronwhip.install
==> Edit cronwhip.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
==> WARNING: This PKGBUILD contains install file that can be dangerous.
cronwhip.install
==> Edit cronwhip.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of cronwhip ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for cronwhip:
==> Building and installing package
==> cronwhip dependencies:
- perl (already installed)
==> Making package: cronwhip 2.0.1-3 any (Sun Feb 7 18:32:46 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading cronwhip-2.0.1.tar.gz...
--2010-02-07 18:32:46-- http://xyne.archlinux.ca/src/cronwhip-2.0.1.tar.gz
Resolving xyne.archlinux.ca... 69.89.25.172
Connecting to xyne.archlinux.ca|69.89.25.172|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9069 (8.9K) [application/x-gzip]
Saving to: "cronwhip-2.0.1.tar.gz.part"
100%[======================================>] 9,069 --.-K/s in 0.08s
2010-02-07 18:32:47 (105 KB/s) - "cronwhip-2.0.1.tar.gz.part" saved [9069/9069]
==> Validating source files with md5sums...
cronwhip-2.0.1.tar.gz ... Passed
==> Extracting Sources...
-> Extracting cronwhip-2.0.1.tar.gz with bsdtar
==> Entering fakeroot environment...
==> Starting build()...
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Adding install script...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: cronwhip 2.0.1-3 any (Sun Feb 7 18:32:47 CST 2010)
==> Continue installing cronwhip? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ----------------------------------------------
==>y
loading package data...
checking dependencies...
(1/1) upgrading cronwhip [#####################] 100%
/sbin/ldconfig: libraries libcurl.so.3 and libcurl.so.4.1.1 in directory /usr/lib have same soname but different type.
==> Checking vote status for cronwhip
==> Do you want to vote for cronwhip inclusion/keeping in [community] ? [Y/n]
==> ----------------------------------------------
==>y
cronwhip now voted
==> Downloading dwarffortress PKGBUILD from AUR...
tar: Record size = 9 blocks
==> Last 5 comments ordered by date (asc):
Comment by: daenyth on Thu, 28 Jan 2010 00:42:48 +0000
Fixed, and binaries being uploaded to the arch-games repo as well :)
Comment by: marenz on Thu, 28 Jan 2010 11:17:29 +0000
missing dependency: fmodex .. or rather, it can't find its libs directory.
Doing LD_LIBRARY_PATH=/opt/df_linux/libs dwarffortress fixed this problem.
But then another problem appears: It can't find the index file and says it must be in the data folder.
Running the game as root works.
--Marenz
Comment by: daenyth on Thu, 28 Jan 2010 13:10:39 +0000
Wooops.. the person I had test it must have had that installed. Can you elaborate on the second error? The tester didn't mention anything about it. I can't test it at the moment myself. I'll try to get another pkgrel out tonight though.
Comment by: marenz on Thu, 28 Jan 2010 14:20:48 +0000
Well, Thats about all it says really.
I straced it and found that it tries to open data/index with READ-WRITE mode, but the file is owned by root and has only the READ right set.
After chowning it to root:games and setting it to chmod g+w it started. however, trying to create a world resulted in a segfault.
Doing chmod g+w on all files in data fixed it.
--Marenz
Comment by: katovatzschyn on Fri, 05 Feb 2010 20:33:47 +0000
40d17
http://www.bay12games.com/forum/index.php?PHPSESSID=747e4a435324f30c2d12bf753bb62482&topic=44829.0
First Submitted: Thu, 01 Jan 2009 21:02:46 +0000
dwarffortress v0.28.181.40d16-2 : A single-player fantasy game. You control a dwarven outpost or an adventurer in a randomly generated, persistent world.
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>y
==> dwarffortress dependencies:
- gtk2 (already installed)
- mesa (already installed)
- sdl_image (already installed)
- libgl (package that provides libgl already installed)
- libjpeg6 (package found)
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of dwarffortress ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for dwarffortress:
resolving dependencies...
looking for inter-conflicts...
Targets (1): libjpeg6-6b-6
Total Download Size: 0.14 MB
Total Installed Size: 0.40 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from archrepo...
libjpeg6-6b-6-x86_64 143.3K 48.9K/s 00:00:03 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) installing libjpeg6 [#####################] 100%
/sbin/ldconfig: libraries libcurl.so.3 and libcurl.so.4.1.1 in directory /usr/lib have same soname but different type.
==> Building and installing package
==> dwarffortress dependencies:
- gtk2 (already installed)
- mesa (already installed)
- sdl_image (already installed)
- libgl (package that provides libgl already installed)
- libjpeg6 (already installed)
==> Making package: dwarffortress v0.28.181.40d16-2 x86_64 (Sun Feb 7 18:33:58 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading df_28_181_40d16_linux.tar.bz2...
--2010-02-07 18:33:58-- http://www.bay12games.com/dwarves/df_28_181_40d16_linux.tar.bz2
Resolving www.bay12games.com... 216.97.239.212
Connecting to www.bay12games.com|216.97.239.212|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7218757 (6.9M) [application/x-bzip2]
Saving to: "df_28_181_40d16_linux.tar.bz2.part"
100%[======================================>] 7,218,757 2.10M/s in 5.1s
2010-02-07 18:34:04 (1.36 MB/s) - "df_28_181_40d16_linux.tar.bz2.part" saved [7218757/7218757]
-> Found dwarffortress in build dir
==> Validating source files with md5sums...
df_28_181_40d16_linux.tar.bz2 ... Passed
dwarffortress ... Passed
==> Extracting Sources...
-> Extracting df_28_181_40d16_linux.tar.bz2 with bsdtar
==> Entering fakeroot environment...
==> Starting build()...
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: dwarffortress v0.28.181.40d16-2 x86_64 (Sun Feb 7 18:34:07 CST 2010)
==> Continue installing dwarffortress? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ----------------------------------------------
==>y
loading package data...
checking dependencies...
(1/1) upgrading dwarffortress [#####################] 100%
/sbin/ldconfig: libraries libcurl.so.3 and libcurl.so.4.1.1 in directory /usr/lib have same soname but different type.
==> Checking vote status for dwarffortress
==> Do you want to vote for dwarffortress inclusion/keeping in [community] ? [Y/n]
==> ----------------------------------------------
==>y
dwarffortress now voted
==> Downloading flashplugin-universal PKGBUILD from AUR...
tar: Record size = 8 blocks
==> Last 5 comments ordered by date (asc):
Comment by: epsilom on Thu, 13 Aug 2009 03:42:04 +0000
install error:
/usr/bin/strip:usr/lib/mozilla/plugins/lib64flashplayer.so: File format not recognized
Error: Makepkg was unable to build flashplugin-universal package.
Comment by: moe on Sun, 20 Sep 2009 11:25:32 +0000
I get the same error like epsilom. I think the pkgbuild can currently not build an i686 package, but Ive no time to investigate/fix that at the moment..
Comment by: anonymous_user on Wed, 09 Dec 2009 01:47:36 +0000
10.0.42.34 is out now. Both x86 and x64.
Comment by: benoror on Thu, 24 Dec 2009 01:06:36 +0000
Just replace version in PKGBUILD
Comment by: zelut on Thu, 24 Dec 2009 19:43:57 +0000
updated to 10.0.42.34.
also, i believe, I have fixed the error re: strip. a 32bit system is unable to recognize or strip a 64bit binary. This package technically should only be installed on a 64bit host.
First Submitted: Thu, 09 Apr 2009 03:55:37 +0000
flashplugin-universal 10.0.42.34-1 : Adobe Flash Player - i686 and x86_64
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>y
==> flashplugin-universal dependencies:
- mozilla-common (already installed)
- lib32-libxt (already installed)
- lib32-gtk2 (already installed)
- lib32-alsa-lib (already installed)
- lib32-nss (already installed)
- lib32-curl (already installed)
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of flashplugin-universal ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for flashplugin-universal:
==> Building and installing package
==> flashplugin-universal dependencies:
- mozilla-common (already installed)
- lib32-libxt (already installed)
- lib32-gtk2 (already installed)
- lib32-alsa-lib (already installed)
- lib32-nss (already installed)
- lib32-curl (already installed)
==> Making package: flashplugin-universal 10.0.42.34-1 x86_64 (Sun Feb 7 18:34:34 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading install_flash_player_10_linux.tar.gz...
--2010-02-07 18:34:34-- http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_10_linux.tar.gz
Resolving fpdownload.macromedia.com... 96.7.202.70
Connecting to fpdownload.macromedia.com|96.7.202.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4050308 (3.9M) [application/x-gzip]
Saving to: "install_flash_player_10_linux.tar.gz.part"
100%[======================================>] 4,050,308 2.01M/s in 1.9s
2010-02-07 18:34:36 (2.01 MB/s) - "install_flash_player_10_linux.tar.gz.part" saved [4050308/4050308]
-> Downloading libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz...
--2010-02-07 18:34:36-- http://download.macromedia.com/pub/labs/flashplayer10/libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz
Resolving download.macromedia.com... 96.7.203.191
Connecting to download.macromedia.com|96.7.203.191|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3730595 (3.6M) [application/x-gzip]
Saving to: "libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz.part"
100%[======================================>] 3,730,595 2.16M/s in 1.7s
2010-02-07 18:34:38 (2.16 MB/s) - "libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz.part" saved [3730595/3730595]
-> Downloading Reader_Player_WWEULA-Combined-20060724_1430.pdf...
--2010-02-07 18:34:38-- http://www.adobe.com/products/eulas/pdfs/Reader_Player_WWEULA-Combined-20060724_1430.pdf
Resolving www.adobe.com... 192.150.18.200
Connecting to www.adobe.com|192.150.18.200|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3105820 (3.0M) [application/pdf]
Saving to: "Reader_Player_WWEULA-Combined-20060724_1430.pdf.part"
100%[======================================>] 3,105,820 845K/s in 4.0s
2010-02-07 18:34:42 (758 KB/s) - "Reader_Player_WWEULA-Combined-20060724_1430.pdf.part" saved [3105820/3105820]
==> Validating source files with md5sums...
install_flash_player_10_linux.tar.gz ... Passed
libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz ... Passed
Reader_Player_WWEULA-Combined-20060724_1430.pdf ... Passed
==> Extracting Sources...
-> Extracting install_flash_player_10_linux.tar.gz with bsdtar
-> Extracting libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz with bsdtar
==> Entering fakeroot environment...
==> Starting build()...
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
gzip: /tmp/yaourt-tmp-wesley/aur-flashplugin-universal/flashplugin-universal/flashplugin-universal-10.0.42.34-1-x86_64.pkg.tar.gz: No space left on device
Error: Makepkg was unable to build flashplugin-universal package.
Error: unable to update flashplugin-universal
==> Resuming previous build
==> Downloading goobox PKGBUILD from AUR...
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Error: unable to update goobox
==> Downloading lib32-sdl_image PKGBUILD from AUR...
tar: Record size = 6 blocks
Comment by: Stunts on Sun, 15 Nov 2009 14:45:57 +0000
Flagged Out-of-date:
New arch release.
Plus, this version is not building - 404 not found error.
Comment by: Stunts on Sun, 15 Nov 2009 14:53:42 +0000
All you have to do is bump the packageversion to "1.2.8" and release to "1".
Don't forget the MD5sum too =-)
Comment by: kfgz on Mon, 16 Nov 2009 08:30:06 +0000
New pkg is 1.2.10-1
MD5: 1429b246a41c88818d50dae9d42c41db
Comment by: trontonic on Wed, 03 Feb 2010 09:07:08 +0000
Got this from the "bauerbill" application:
error: The PKGBUILD for lib32-sdl_image is incorrect. Please inform the packager that the "install" variable should be a string, not an array
error: unable to safely determine the correct install file
First Submitted: Wed, 31 Dec 2008 02:07:05 +0000
lib32-sdl_image 1.2.10-2 : A simple library to load images of various formats as SDL surfaces
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>y
==> lib32-sdl_image dependencies:
- lib32-sdl (already installed)
- lib32-libpng (already installed)
- lib32-libjpeg (already installed)
- lib32-libtiff (already installed)
- lib32-zlib (already installed)
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of lib32-sdl_image ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for lib32-sdl_image:
==> Building and installing package
==> lib32-sdl_image dependencies:
- lib32-sdl (already installed)
- lib32-libpng (already installed)
- lib32-libjpeg (already installed)
- lib32-libtiff (already installed)
- lib32-zlib (already installed)
==> Making package: lib32-sdl_image 1.2.10-2 x86_64 (Sun Feb 7 18:35:18 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading sdl_image-1.2.10-2-i686.pkg.tar.gz...
--2010-02-07 18:35:18-- http://mir.archlinux.fr/extra/os/i686/sdl_image-1.2.10-2-i686.pkg.tar.gz
Resolving mir.archlinux.fr... 213.186.62.207
Connecting to mir.archlinux.fr|213.186.62.207|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 51941 (51K) [application/x-gzip]
Saving to: "sdl_image-1.2.10-2-i686.pkg.tar.gz.part"
100%[======================================>] 51,941 60.7K/s in 0.8s
2010-02-07 18:35:19 (60.7 KB/s) - "sdl_image-1.2.10-2-i686.pkg.tar.gz.part" saved [51941/51941]
==> Validating source files with md5sums...
sdl_image-1.2.10-2-i686.pkg.tar.gz ... Passed
==> Extracting Sources...
-> Extracting sdl_image-1.2.10-2-i686.pkg.tar.gz with bsdtar
==> Entering fakeroot environment...
==> Starting build()...
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: lib32-sdl_image 1.2.10-2 x86_64 (Sun Feb 7 18:35:20 CST 2010)
==> Continue installing lib32-sdl_image? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ----------------------------------------------
==>y
loading package data...
checking dependencies...
(1/1) upgrading lib32-sdl_image [#####################] 100%
/sbin/ldconfig: libraries libcurl.so.3 and libcurl.so.4.1.1 in directory /usr/lib have same soname but different type.
==> Checking vote status for lib32-sdl_image
You have already voted for lib32-sdl_image inclusion/keeping in [community]
==> Downloading mencoder PKGBUILD from AUR...
tar: Record size = 8 blocks
==> Last 5 comments ordered by date (asc):
Comment by: Slumslayer on Wed, 26 Aug 2009 19:49:44 +0000
I've updated the package and added a patch for fribidi.
Comment by: alexk on Wed, 04 Nov 2009 01:26:17 +0000
It doesn't build on x64, last lines of the output:
libmpdemux/demux_gif.o: In function `demux_close_gif':
demux_gif.c:(.text+0x17): undefined reference to `DGifCloseFile'
demux_gif.c:(.text+0x39): undefined reference to `PrintGifError'
libmpdemux/demux_gif.o: In function `demux_open_gif':
demux_gif.c:(.text+0xa9): undefined reference to `DGifOpen'
demux_gif.c:(.text+0x181): undefined reference to `PrintGifError'
libmpdemux/demux_gif.o: In function `demux_gif_fill_buffer':
demux_gif.c:(.text+0x4c0): undefined reference to `DGifGetRecordType'
demux_gif.c:(.text+0x4fc): undefined reference to `DGifGetExtension'
demux_gif.c:(.text+0x544): undefined reference to `DGifGetImageDesc'
demux_gif.c:(.text+0x638): undefined reference to `DGifGetLine'
demux_gif.c:(.text+0x93c): undefined reference to `DGifGetScreenDesc'
demux_gif.c:(.text+0x99d): undefined reference to `DGifGetExtensionNext'
demux_gif.c:(.text+0x9a9): undefined reference to `PrintGifError'
demux_gif.c:(.text+0x9df): undefined reference to `DGifGetExtensionNext'
collect2: ld returned 1 exit status
make: aurpage comments PKGBUILD [mencoder] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build mencoder package.
Comment by: Slumslayer on Thu, 05 Nov 2009 10:42:27 +0000
Package updated, it should build now.
Comment by: Gallaecio on Fri, 11 Dec 2009 19:37:03 +0000
Add patch to makedependences
Comment by: Slumslayer on Thu, 31 Dec 2009 12:29:09 +0000
Updated to use subversion
First Submitted: Fri, 07 Nov 2008 12:07:05 +0000
mencoder 30146-1 : A command line video decoding, encoding and filtering tool
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> mencoder dependencies:
- lame (already installed)
- libtheora (already installed)
- xvidcore (already installed)
- x264 (already installed)
- faac (already installed)
- subversion (already installed)
==> Continue the building of mencoder ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for mencoder:
==> Building and installing package
mkdir: cannot create directory `/var/abs/local/yaourtbuild': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/mencoder directory. Using /tmp directory
==> mencoder dependencies:
- lame (already installed)
- libtheora (already installed)
- xvidcore (already installed)
- x264 (already installed)
- faac (already installed)
- subversion (already installed)
==> Determining latest svn revision...
-> Version found: 30524
==> Making package: mencoder 30524-1 x86_64 (Sun Feb 7 18:35:41 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
A mplayer/vobsub.c
A mplayer/debian
A mplayer/debian/control
A mplayer/debian/dirs
A mplayer/debian/menu
A mplayer/debian/postrm
A mplayer/debian/config
A mplayer/debian/TODO.Debian
A mplayer/debian/watch
A mplayer/debian/changelog
A mplayer/debian/mime
A mplayer/debian/copyright
A mplayer/debian/rules
A mplayer/debian/README.debian
A mplayer/debian/templates
A mplayer/libmpcodecs
A mplayer/libmpcodecs/ae_faac.c
A mplayer/libmpcodecs/vf_rectangle.c
A mplayer/libmpcodecs/vf_fspp.c
A mplayer/libmpcodecs/ae_faac.h
A mplayer/libmpcodecs/vf_decimate.c
A mplayer/libmpcodecs/vd_zrmjpeg.c
A mplayer/libmpcodecs/vd_dmo.c
A mplayer/libmpcodecs/vf_screenshot.c
A mplayer/libmpcodecs/vf_hue.c
A mplayer/libmpcodecs/ad_imaadpcm.c
A mplayer/libmpcodecs/pullup.c
A mplayer/libmpcodecs/vf_eq2.c
A mplayer/libmpcodecs/ae_pcm.c
A mplayer/libmpcodecs/pullup.h
A mplayer/libmpcodecs/vd_xvid4.c
A mplayer/libmpcodecs/ad_dshow.c
A mplayer/libmpcodecs/ve_xvid4.c
A mplayer/libmpcodecs/vf_rotate.c
A mplayer/libmpcodecs/ae_pcm.h
A mplayer/libmpcodecs/vd_libdv.c
A mplayer/libmpcodecs/vd_mpng.c
A mplayer/libmpcodecs/ve_libdv.c
A mplayer/libmpcodecs/vf_1bpp.c
A mplayer/libmpcodecs/vf_filmdint.c
A mplayer/libmpcodecs/vf_halfpack.c
A mplayer/libmpcodecs/ve_qtvideo.c
A mplayer/libmpcodecs/ad_ffmpeg.c
A mplayer/libmpcodecs/vf_pp.c
A mplayer/libmpcodecs/ad_qtaudio.c
A mplayer/libmpcodecs/vd_internal.h
A mplayer/libmpcodecs/vd_theora.c
A mplayer/libmpcodecs/vf_kerndeint.c
A mplayer/libmpcodecs/vf_vo.c
A mplayer/libmpcodecs/vf_blackframe.c
A mplayer/libmpcodecs/ad_mpc.c
A mplayer/libmpcodecs/vf_perspective.c
A mplayer/libmpcodecs/vf_tinterlace.c
A mplayer/libmpcodecs/vd_vfwex.c
A mplayer/libmpcodecs/ve_vfw.c
A mplayer/libmpcodecs/vf_crop.c
A mplayer/libmpcodecs/vf_eq.c
A mplayer/libmpcodecs/vf_sab.c
A mplayer/libmpcodecs/vf_lavcdeint.c
A mplayer/libmpcodecs/vf_fil.c
A mplayer/libmpcodecs/native
A mplayer/libmpcodecs/native/rtjpegn.h
A mplayer/libmpcodecs/native/xa_gsm.c
A mplayer/libmpcodecs/native/xa_gsm.h
A mplayer/libmpcodecs/native/mmx.h
A mplayer/libmpcodecs/native/alaw.h
A mplayer/libmpcodecs/native/rtjpegn.c
A mplayer/libmpcodecs/native/xa_gsm_int.h
A mplayer/libmpcodecs/vf_noise.c
A mplayer/libmpcodecs/vf_remove_logo.c
A mplayer/libmpcodecs/ad_hwac3.c
A mplayer/libmpcodecs/cmmx.h
A mplayer/libmpcodecs/vf_noformat.c
A mplayer/libmpcodecs/vf_swapuv.c
A mplayer/libmpcodecs/vf_framestep.c
A mplayer/libmpcodecs/vf_ass.c
A mplayer/libmpcodecs/vd_ijpg.c
A mplayer/libmpcodecs/ve_raw.c
A mplayer/libmpcodecs/ad_pcm.c
A mplayer/libmpcodecs/vf_down3dright.c
A mplayer/libmpcodecs/vf_cropdetect.c
A mplayer/libmpcodecs/vd_mpegpes.c
A mplayer/libmpcodecs/ad_msgsm.c
A mplayer/libmpcodecs/vf_phase.c
A mplayer/libmpcodecs/vf_softskip.c
A mplayer/libmpcodecs/ad_faad.c
A mplayer/libmpcodecs/ad_libdv.c
A mplayer/libmpcodecs/vf_divtc.c
A mplayer/libmpcodecs/ae_toolame.c
A mplayer/libmpcodecs/vf_yvu9.c
A mplayer/libmpcodecs/vf_denoise3d.c
A mplayer/libmpcodecs/vd.c
A mplayer/libmpcodecs/ae_toolame.h
A mplayer/libmpcodecs/vf_expand.c
A mplayer/libmpcodecs/vf_hqdn3d.c
A mplayer/libmpcodecs/ae_twolame.c
A mplayer/libmpcodecs/vd.h
A mplayer/libmpcodecs/vf_dvbscale.c
A mplayer/libmpcodecs/dec_video.c
A mplayer/libmpcodecs/vf_gradfun.c
A mplayer/libmpcodecs/vf_uspp.c
A mplayer/libmpcodecs/ae_twolame.h
A mplayer/libmpcodecs/ad_libdca.c
A mplayer/libmpcodecs/vf_telecine.c
A mplayer/libmpcodecs/vf_yuvcsp.c
A mplayer/libmpcodecs/ad.c
A mplayer/libmpcodecs/vf_tfields.c
A mplayer/libmpcodecs/dec_video.h
A mplayer/libmpcodecs/vf_tile.c
A mplayer/libmpcodecs/ad_speex.c
A mplayer/libmpcodecs/ad.h
A mplayer/libmpcodecs/vd_libmpeg2.c
A mplayer/libmpcodecs/vf_softpulldown.c
A mplayer/libmpcodecs/vd_vfw.c
A mplayer/libmpcodecs/vf_spp.c
A mplayer/libmpcodecs/vd_ffmpeg.c
A mplayer/libmpcodecs/ve_x264.c
A mplayer/libmpcodecs/vf_ilpack.c
A mplayer/libmpcodecs/ad_libvorbis.c
A mplayer/libmpcodecs/vf_il.c
A mplayer/libmpcodecs/vqf.h
A mplayer/libmpcodecs/vf_pp7.c
A mplayer/libmpcodecs/vfcap.h
A mplayer/libmpcodecs/vf_smartblur.c
A mplayer/libmpcodecs/vf_geq.c
A mplayer/libmpcodecs/vf_zrmjpeg.c
A mplayer/libmpcodecs/vf_qp.c
A mplayer/libmpcodecs/vf_pullup.c
A mplayer/libmpcodecs/vf_mcdeint.c
A mplayer/libmpcodecs/mp_image.c
A mplayer/libmpcodecs/vf_field.c
A mplayer/libmpcodecs/vd_realvid.c
A mplayer/libmpcodecs/vf_ow.c
A mplayer/libmpcodecs/ad_dvdpcm.c
A mplayer/libmpcodecs/ad_realaud.c
A mplayer/libmpcodecs/ad_liba52.c
A mplayer/libmpcodecs/vd_raw.c
A mplayer/libmpcodecs/mp_image.h
A mplayer/libmpcodecs/ad_dmo.c
A mplayer/libmpcodecs/img_format.c
A mplayer/libmpcodecs/ad_internal.h
A mplayer/libmpcodecs/ad_alaw.c
A mplayer/libmpcodecs/img_format.h
A mplayer/libmpcodecs/ad_mp3lib.c
A mplayer/libmpcodecs/vf_ivtc.c
A mplayer/libmpcodecs/ve_nuv.c
A mplayer/libmpcodecs/vf_yuy2.c
A mplayer/libmpcodecs/ve.c
A mplayer/libmpcodecs/dec_audio.c
A mplayer/libmpcodecs/vf_lavc.c
A mplayer/libmpcodecs/dec_audio.h
A mplayer/libmpcodecs/ae.c
A mplayer/libmpcodecs/vf_yadif.c
A mplayer/libmpcodecs/ae.h
A mplayer/libmpcodecs/ae_lavc.c
A mplayer/libmpcodecs/ae_lavc.h
A mplayer/libmpcodecs/mpc_info.h
A mplayer/libmpcodecs/vd_null.c
A mplayer/libmpcodecs/ad_acm.c
A mplayer/libmpcodecs/vd_xanim.c
A mplayer/libmpcodecs/vd_sgi.c
A mplayer/libmpcodecs/vd_dshow.c
svn: Can't close file 'mplayer/libmpcodecs/.svn/tmp/text-base/ve_lavc.c.svn-base': No space left on device
==> SVN checkout done or server timeout
cp: writing `mplayer-build/.svn/tmp/text-base/vobsub.c.svn-base': No space left on device
cp: writing `mplayer-build/debian/.svn/dir-prop-base': No space left on device
cp: writing `mplayer-build/debian/.svn/entries': No space left on device
cp: writing `mplayer-build/debian/.svn/prop-base/README.debian.svn-base': No space left on device
cp: writing `mplayer-build/debian/.svn/prop-base/TODO.Debian.svn-base': No space left on device
cp: writing `mplayer-build/debian/.svn/prop-base/changelog.svn-base': No space left on device
cp: writing `mplayer-build/debian/.svn/prop-base/config.svn-base': No space left on device
cp: cannot create regular fixa_gsm_int.h.svn-base': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/.svn/text-base/alaw.h.svn-base': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/.svn/text-base/mmx.h.svn-base': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/.svn/text-base/rtjpegn.c.svn-base': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/.svn/text-base/rtjpegn.h.svn-base': No space left on device
cp: cannot create regular file `mplayer-build/libmpcodecs/native/.svn/text-base/xa_gsm.c.svn-base': No space left on device
cp: cannot create regular file `mplayer-build/libmpcodecs/native/.svn/text-base/xa_gsm.h.svn-base': No space left on device
cp: cannot create regular file `mplayer-build/libmpcodecs/native/.svn/text-base/xa_gsm_int.h.svn-base': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/alaw.h': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/mmx.h': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/rtjpegn.c': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/rtjpegn.h': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/xa_gsm.c': No space left on device
cp: writing `mplayer-build/libmpcodecs/native/xa_gsm.h': No space left on device
cp: cannot create regular file `mplayer-build/libmpcodecs/native/xa_gsm_int.h': No space left on device
==> Building the package...
/tmp/yaourt-tmp-wesley/aur-mencoder/mencoder/./PKGBUILD: line 41: ./configure: No such file or directory
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.
mv: cannot stat `/tmp/yaourt-tmp-wesley/aur-mencoder/mencoder/pkg/usr/share/man/man1/mplayer.1': No such file or directory
==> Cleaning build files...
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: mencoder 30524-1 x86_64 (Sun Feb 7 18:35:47 CST 2010)
==> Continue installing mencoder? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ----------------------------------------------
==>y
loading package data...
checking dependencies...
(1/1) upgrading mencoder [#####################] 100%
/sbin/ldconfig: libraries libcurl.so.3 and libcurl.so.4.1.1 in directory /usr/lib have same soname but different type.
==> Checking vote status for mencoder
You have already voted for mencoder inclusion/keeping in [community]
==> Downloading smplayer-svn PKGBUILD from AUR...
tar: Record size = 7 blocks
==> Last 5 comments ordered by date (asc):
Comment by: flamelab on Wed, 29 Jul 2009 05:40:12 +0000
You ought to read my last post under yours ;-)
The proper way of making the present PKGBUILD is that--> e.g. provides=("smplayer=${_latestver}") , since I inform pacman for the real version of the package.
And I'm actually having as depedency the "extra" mplayer.
Comment by: b4283 on Fri, 25 Dec 2009 07:55:16 +0000
hi, about the smplayer.desktop file.
i think you should use the %f argument for the Exec line instead of %u
because it's not necessary to translate filenames into URLs on a unicode-able system like linux
Comment by: flamelab on Sun, 17 Jan 2010 15:55:26 +0000
Update: added a patch made by wantilles, that restores alsa as default audio output driver (now it is pulseaudio)
Comment by: hseldon6 on Mon, 18 Jan 2010 14:56:50 +0000
The Patch doesn't work.
Comment by: flamelab on Mon, 18 Jan 2010 15:07:31 +0000
Yes, because they fixed the issue.
Updated.
First Submitted: Tue, 19 Feb 2008 15:58:53 +0000
smplayer-svn 3409-1 : A complete front-end for MPlayer
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> smplayer-svn dependencies:
- qt (already installed)
- mplayer (already installed)
- subversion (already installed)
==> Continue the building of smplayer-svn ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for smplayer-svn:
==> Building and installing package
mkdir: cannot create directory `/var/abs/local/yaourtbuild': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/smplayer-svn directory. Using /tmp directory
==> smplayer-svn dependencies:
- qt (already installed)
- mplayer (already installed)
- subversion (already installed)
==> Determining latest svn revision...
-> Version found: 3423
==> Making package: smplayer-svn 3423-1 x86_64 (Sun Feb 7 18:36:22 CST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
A smplayer/smplayer.spec
A smplayer/src
A smplayer/src/prefgeneral.h
A smplayer/src/global.cpp
A smplayer/src/input.conf
A smplayer/src/prefdrives.ui
A smplayer/src/about.ui
A smplayer/src/preferences.h
A smplayer/src/filepropertiesdialog.ui
A smplayer/src/playlistdock.h
A smplayer/src/filters.cpp
A smplayer/src/filesettingshash.h
A smplayer/src/selectcolorbutton.cpp
A smplayer/src/deviceinfo.cpp
A smplayer/src/prefadvanced.ui
A smplayer/src/logwindow.h
A smplayer/src/mplayerversion.cpp
A smplayer/src/prefinput.h
A smplayer/src/timedialog.h
A smplayer/src/playlistpreferences.cpp
A smplayer/src/urlhistory.cpp
A smplayer/src/basegui.h
A smplayer/src/videopreview
A smplayer/src/videopreview/videopreviewconfigdialog.cpp
A smplayer/src/videopreview/async.diff
A smplayer/src/videopreview/videopreviewconfigdialog.h
A smplayer/src/videopreview/main.cpp
A smplayer/src/videopreview/videopreview.pro
A smplayer/src/videopreview/videopreview.cpp
A smplayer/src/videopreview/videopreviewconfigdialog.ui
A smplayer/src/videopreview/videopreview.h
A smplayer/src/defaultgui.cpp
A smplayer/src/tvlist.h
A smplayer/src/favoriteeditor.h
A smplayer/src/videoequalizer.h
A smplayer/src/translator.h
A smplayer/src/timeslider.cpp
A smplayer/src/subtracks.cpp
A smplayer/src/playlist.cpp
A smplayer/src/mpcgui
A smplayer/src/mpcgui/mpc_stereo.png
A smplayer/src/mpcgui/mpc_toolbar.png
A smplayer/src/mpcgui/mpcstyles.cpp
A smplayer/src/mpcgui/mpcgui.cpp
A smplayer/src/mpcgui/mpcstyles.h
A smplayer/src/mpcgui/mpc_mono.png
A smplayer/src/mpcgui/mpcgui.h
A smplayer/src/widgetactions.cpp
A smplayer/src/myactiongroup.h
A smplayer/src/mediasettings.h
A smplayer/src/mplayerprocess.cpp
A smplayer/src/prefperformance.ui
A smplayer/src/images.h
A smplayer/src/mediadata.h
A smplayer/src/guiconfig.h
A smplayer/src/basegui.cpp
A smplayer/src/selectcolorbutton.h
A smplayer/src/prefinterface.h
A smplayer/src/myprocess.cpp
A smplayer/src/prefgeneral.ui
A smplayer/src/screensaver.h
A smplayer/src/preferencesdialog.h
A smplayer/src/logwindowbase.ui
A smplayer/src/infofile.h
A smplayer/src/seekwidget.h
A smplayer/src/preftv.ui
A smplayer/src/filechooser.cpp
A smplayer/src/filesettings.h
A smplayer/src/mytablewidget.h
A smplayer/src/eqslider.cpp
A smplayer/src/recents.h
A smplayer/src/prefplaylist.ui
A smplayer/src/icons-png
A smplayer/src/icons-png/contributors.png
A smplayer/src/icons-png/rotate.png
A smplayer/src/icons-png/pref_devices.png
A smplayer/src/icons-png/equalizer.png
A smplayer/src/icons-png/conflict.png
A smplayer/src/icons-png/download_subs.png
A smplayer/src/icons-png/warning.png
A smplayer/src/icons-png/dvd_drive.png
A smplayer/src/icons-png/copy.png
A smplayer/src/icons-png/vcd.png
A smplayer/src/icons-png/type_vcd.png
A smplayer/src/icons-png/pause.png
A smplayer/src/icons-png/favorite.png
A smplayer/src/icons-png/repeat.png
A smplayer/src/icons-png/a_marker.png
A smplayer/src/icons-png/url_big.png
A smplayer/src/icons-png/instance1.png
A smplayer/src/icons-png/instance2.png
A smplayer/src/icons-png/compact.png
A smplayer/src/icons-png/dvd_hd.png
A smplayer/src/icons-png/audio_filters.png
A smplayer/src/icons-png/sub.png
A smplayer/src/icons-png/pref_subtitles.png
A smplayer/src/icons-png/minus.png
A smplayer/src/icons-png/cdda.png
A smplayer/src/icons-png/video_filters.png
A smplayer/src/icons-png/video_size.png
A smplayer/src/icons-png/playlist.png
A smplayer/src/icons-png/delete.png
A smplayer/src/icons-png/play_pause.png
A smplayer/src/icons-png/close.png
A smplayer/src/icons-png/volume.png
A smplayer/src/icons-png/exit.png
A smplayer/src/icons-png/bola.xcf
A smplayer/src/icons-png/ok.png
A smplayer/src/icons-png/open_tv.png
A smplayer/src/icons-png/pref_associations.png
A smplayer/src/icons-png/audio_channels.png
A smplayer/src/icons-png/screenshot.png
A smplayer/src/icons-png/next_aspect.png
A smplayer/src/icons-png/next.png
A smplayer/src/icons-png/aspect.png
A smplayer/src/icons-png/background.png
A smplayer/src/icons-png/open_radio.png
A smplayer/src/icons-png/pref_advanced.png
A smplayer/src/icons-png/gamma.png
A smplayer/src/icons-png/license.png
A smplayer/src/icons-png/open_playlist.png
A smplayer/src/icons-png/toolbars.png
A smplayer/src/icons-png/stop.png
A smplayer/src/icons-png/audio_track.png
A smplayer/src/icons-png/chapter.png
A smplayer/src/icons-png/saturation.png
A smplayer/src/icons-png/type_tv.png
A smplayer/src/icons-png/info.png
A smplayer/src/icons-png/type_cdda.png
A smplayer/src/icons-png/cdrom_drive.png
A smplayer/src/icons-png/openfolder.png
A smplayer/src/icons-png/save.png
A smplayer/src/icons-png/ontop.png
A smplayer/src/icons-png/logo.png
A smplayer/src/icons-png/input_devices.png
A smplayer/src/icons-png/url.png
A smplayer/src/icons-png/type_audio.png
A smplayer/src/icons-png/type_url.png
A smplayer/src/icons-png/logs.png
A smplayer/src/icons-png/play.png
A smplayer/src/icons-png/stereo_mode.png
A smplayer/src/icons-png/cl_help.png
A smplayer/src/icons-png/rewind10m.png
A smplayer/src/icons-png/down.png
A smplayer/src/icons-png/download.png
A smplayer/src/icons-png/faq.png
A smplayer/src/icons-png/type_video.png
A smplayer/src/icons-png/mute.png
A smplayer/src/icons-png/mirror.png
A smplayer/src/icons-png/previous.png
A smplayer/src/icons-png/rewind10s.png
A smplayer/src/icons-png/flecha.xcf
A smplayer/src/icons-png/prefs.png
A smplayer/src/icons-png/find.png
A smplayer/src/icons-png/hue.png
A smplayer/src/icons-png/forward10m.png
A smplayer/src/icons-png/audio_equalizer.png
A smplayer/src/icons-png/plus.png
A smplayer/src/icons-png/osd.png
A smplayer/src/icons-png/rewind1m.png
A smplayer/src/icons-png/monitor.png
A smplayer/src/icons-png/mouse.png
A smplayer/src/icons-png/forward10s.png
A smplayer/src/icons-png/resize_window.png
A smplayer/src/icons-png/speaker.png
A smplayer/src/icons-png/shuffle.png
A smplayer/src/icons-png/contrast.png
A smplayer/src/icons-png/refresh.png
A smplayer/src/icons-png/keyboard.png
A smplayer/src/icons-png/pref_gui.png
A smplayer/src/icons-png/screenshots.png
A smplayer/src/icons-png/speed.png
A smplayer/src/icons-png/type_unknown.png
A smplayer/src/icons-png/open.png
A smplayer/src/icons-png/fullscreen.png
A smplayer/src/icons-png/forward1m.png
A smplayer/src/icons-png/video_preview.png
A smplayer/src/icons-png/brightness.png
A smplayer/src/icons-png/translators.png
A smplayer/src/icons-png/dvd.png
A smplayer/src/icons-png/pref_performance.png
A smplayer/src/icons-png/type_dvd.png
A smplayer/src/icons-png/tips.png
A smplayer/src/icons-png/title.png
A smplayer/src/icons-png/b_marker.png
A smplayer/src/icons-png/unload.png
A smplayer/src/icons-png/qt.png
A smplayer/src/icons-png/up.png
A smplayer/src/icons-png/angle.png
A smplayer/src/icons-png/pref_general.png
A smplayer/src/icons-png/flip.png
A smplayer/src/preferencesdialog.ui
A smplayer/src/shortcuts
A smplayer/src/shortcuts/sda.keys
A smplayer/src/shortcuts/default.keys
A smplayer/src/playlistpreferences.ui
A smplayer/src/prefperformance.cpp
A smplayer/src/verticaltext.cpp
A smplayer/src/constants.h
A smplayer/src/prefassociations.h
A smplayer/src/inputurl.cpp
A smplayer/src/version.cpp
A smplayer/src/desktopinfo.cpp
A smplayer/src/discname.h
A smplayer/src/myslider.cpp
A smplayer/src/myclient.h
A smplayer/src/inputmplayerversion.ui
A smplayer/src/seekwidget.cpp
A smplayer/src/infofile.cpp
A smplayer/src/core.h
A smplayer/src/testcorelib
A smplayer/src/testcorelib/test.cpp
A smplayer/src/testcorelib/test2.cpp
A smplayer/src/testcorelib/test.h
A smplayer/src/testcorelib/test.pro
A smplayer/src/translations
A smplayer/src/translations/smplayer_lt.ts
A smplayer/src/translations/smplayer_ro_RO.ts
A smplayer/src/translations/smplayer_pt.ts
A smplayer/src/translations/smplayer_ca.ts
A smplayer/src/translations/smplayer_sr.ts
A smplayer/src/translations/smplayer_tr.ts
A smplayer/src/translations/smplayer_sv.ts
A smplayer/src/translations/smplayer_bg.ts
A smplayer/src/translations/smplayer_de.ts
A smplayer/src/translations/smplayer_ja.ts
A smplayer/src/translations/smplayer_ka.ts
A smplayer/src/translations/smplayer_zh_TW.ts
A smplayer/src/translations/smplayer_ru_RU.ts
A smplayer/src/translations/smplayer_fi.ts
A smplayer/src/translations/smplayer_zh_CN.ts
A smplayer/src/translations/smplayer_uk_UA.ts
A smplayer/src/translations/smplayer_cs.ts
A smplayer/src/translations/smplayer_pt_BR.ts
A smplayer/src/translations/smplayer_es.ts
A smplayer/src/translations/smplayer_mk.ts
A smplayer/src/translations/smplayer_eu.ts
A smplayer/src/translations/smplayer_en_US.ts
A smplayer/src/translations/smplayer_ko.ts
A smplayer/src/translations/smplayer_sl_SI.ts
A smplayer/src/translations/smplayer_hu.ts
A smplayer/src/translations/smplayer_ar_SY.ts
A smplayer/src/translations/smplayer_sk.ts
A smplayer/src/translations/smplayer_ku.ts
A smplayer/src/translations/smplayer_vi_VN.ts
A smplayer/src/translations/smplayer_el_GR.ts
A smplayer/src/translations/smplayer_gl.ts
svn: Can't write to file 'smplayer/src/translations/.svn/tmp/text-base/smplayer_fr.ts.svn-base': No space left on device
==> SVN checkout done or server timeout
==> Starting make...
cp: writing `smplayer-build/.svn/tmp/text-base/smplayer.spec.svn-base': No space left on device
cp: writing `smplayer-build/src/.svn/entries': No space left on device
cp: writing `smplayer-build/src/.svn/log': No space left on device
cp: writing `smplayer-build/src/.svn/log.1': No space left on device
cp: writing `smplayer-build/src/.svn/log.2': No space left on device
cp: writing `smplayer-build/src/.svn/log.3': No space left on device
cp: writing `smplayer-build/src/.svn/log.4': No space left on device
cp: cannot create directory `smplayer-build/src/.svn/props': No space left on device
cp: cannot create directory `smplayer-build/src/.svn/text-base': No space left on device
cp: cannot create directory `smplayer-build/src/.svn/tmp': No space left on device
cp: writing `smplayer-build/src/about.ui': No space left on device
cp: writing `smplayer-build/src/basegui.h': No space left on device
cp: writing `smplayer-build/src/defaultgui.cpp': No space left on device
cp: writing `smplayer-build/src/deviceinfo.cpp': No space left on device
cp: cannot create regular file `smplayer-build/src/favoriteeditor.h': No space left on device
cp: cannot create regular file `smplayer-build/src/filepropertiesdialog.ui': No space left on device
cp: cannot create regular file `smplayer-build/src/filesettingshash.h': No space left on device
cp: writing `smplayer-build/src/filters.cpp': No space left on device
cp: cannot create regular file `smplayer-build/src/global.cpp': No space left on device
cp: cannot create directory `smplayer-buil
evice
cp: cannot create regular file `smplayer-build/src/urlhistory.cpp': No space left on device
cp: cannot create regular file `smplayer-build/src/videoequalizer.h': No space left on device
cp: cannot create directory `smplayer-build/src/videopreview': No space left on device
sed: can't read src/smplayer.pro: No such file or directory
sed: can't read Makefile: No such file or directory
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build smplayer-svn package.
Error: unable to update smplayer-svn
==> Downloading tuxpaint-stamps PKGBUILD from AUR...
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Error: unable to update tuxpaint-stamps
Following packages have not been installed:
bin32-jre flashplugin-universal smplayer-svn
sort: fflush failed: standard output: No space left on device
sort: write error
sort: write failed: standard output: No space left on device
sort: write error
[wesley@ratdog ~]$
So I did ;
[wesley@ratdog ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sdb3 7.4G 7.4G 504K 100% /
udev 10M 188K 9.9M 2% /dev
none 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 99M 12M 82M 13% /boot
/dev/sdb4 291G 54G 238G 19% /home
[wesley@ratdog ~]$ sudo pacman -Sc
Cache directory: /home/wesley/dontdelete/
Do you want to remove uninstalled packages from cache? [Y/n] y
removing old packages from cache...
Database directory: /var/lib/pacman/
Do you want to remove unused repositories? [Y/n] y
Database directory cleaned up
[wesley@ratdog ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sdb3 7.4G 7.4G 484K 100% /
udev 10M 188K 9.9M 2% /dev
none 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 99M 12M 82M 13% /boot
/dev/sdb4 291G 54G 238G 19% /home
[wesley@ratdog ~]$
And no difference . I've posted here because I have a CacheDir in /etc/pacman.conf and am now wondering whats going on ? I apologize in advance for the long post and if this is posted in the wrong place . Here's the
configs for Pacman, Powerpill, Yaourt . I've checked the logs and the ones I looked at , (var) , are under a gig.
7 gigs , ( root ) , should be plenty , right ?
Here's another one ;
[wesley@ratdog ~]$ sudo gedit /etc/pacman.conf
Password:
(gedit:21676): Gtk-WARNING **: Attempting to store changes into `/root/.recently-used.xbel', but failed: Failed to write file '/root/.recently-used.xbel.D7LF7U': fwrite() failed: No space left on device
(gedit:21676): Gtk-WARNING **: Attempting to store changes into `/root/.recently-used.xbel', but failed: Failed to write file '/root/.recently-used.xbel.CXTE7U': fwrite() failed: No space left on device
** (gedit:21676): WARNING **: Could not write gedit state file: Failed to write file '/root/.gnome2/gedit/gedit-2.0BXE7U': fflush() failed: No space left on device
I/O error : No space left on device
I/O error : flush error
/etc/pacman.conf http://dpaste.com/155972/
/etc/yaourtrc http://dpaste.com/155974/
/etc/powerpill.conf http://dpaste.com/155977/
I'm reluctant to issue -Scc if it can be avoided . Thank You[wesley@ratdog ~]$ yaourt -Qqdt
cvs was installed as dependencies but are no longer required by any installed package
dumb was installed as dependencies but are no longer required by any installed package
dvdwizard was installed as dependencies but are no longer required by any installed package
eclipse-ecj was installed as dependencies but are no longer required by any installed package
fluidsynth was installed as dependencies but are no longer required by any installed package
gdk-pixbuf was installed as dependencies but are no longer required by any installed package
git was installed as dependencies but are no longer required by any installed package
gnome-common was installed as dependencies but are no longer required by any installed package
gpac was installed as dependencies but are no longer required by any installed package
gtk-doc was installed as dependencies but are no longer required by any installed package
gtkglext was installed as dependencies but are no longer required by any installed package
haskell-x11 was installed as dependencies but are no longer required by any installed package
lib32-printproto was installed as dependencies but are no longer required by any installed package
lib32-sdl_image was installed as dependencies but are no longer required by any installed package
libchamplain was installed as dependencies but are no longer required by any installed package
libgtkhtml was installed as dependencies but are no longer required by any installed package
libmpdclient was installed as dependencies but are no longer required by any installed package
libmtp was installed as dependencies but are no longer required by any installed package
live-media was installed as dependencies but are no longer required by any installed package
mkvtoolnix was installed as dependencies but are no longer required by any installed package
ogmtools was installed as dependencies but are no longer required by any installed package
openal was installed as dependencies but are no longer required by any installed package
p7zip was installed as dependencies but are no longer required by any installed package
perl-file-mimeinfo was installed as dependencies but are no longer required by any installed package
perl-universal-require was installed as dependencies but are no longer required by any installed package
postr was installed as dependencies but are no longer required by any installed package
python-distutils-extra was installed as dependencies but are no longer required by any installed package
python-gdata was installed as dependencies but are no longer required by any installed package
rpmextract was installed as dependencies but are no longer required by any installed package
subversion was installed as dependencies but are no longer required by any installed package
sword was installed as dependencies but are no longer required by any installed package
xine-lib was installed as dependencies but are no longer required by any installed package
==> Do you want to remove these packages (with -Rcs options) ? [y/N]
==> ----------------------------------------------
==>
Roughly the same . Pacgraph is a neat visual , but , , , . Will try to find the scripts -
Can't resize/repartition in Disk Utility: "No space left on device"
So I'm trying to get my Macbook (early 2008, base model) set up for triple-booting Leopard, Linux, and Windows XP. I've been using Boot Camp for about a month or so, and yesterday I used Boot Camp Assistant to remove the XP partition and make the Leopard partition 100% of the drive. Fine. After that, I was following this guide, and installed rEFIt to be able to choose from three operating systems on boot (as Apple's included bootloader only lets you choose Leo and Windows). Immediately after that (without restarting, maybe I should have) I tried to partition using diskutil from Terminal, with the following command:
*sudo diskutil resizeVolume disk0s2 60G "MS-DOS FAT32" "Linux" 30G "MS-DOS FAT32" "Windows" 21G*
After going through Verifying, Resizing Volume, Adjusting Partitions, it finally giving me an error: "*Resizing encountered error on disk disk0s2 Macintosh HD: No space left on device (28)*", even though my drive is 120GB (around 111.8GiB) and I entered 60 + 30 + 21 GiB = 111 GiB. As per the above guide, I then tried:
*sudo diskutil resizeVolume disk0s2 60G*
The above command should resize my main volume to 60GiB and leave empty space after. It also fails the same way. I then tried doing it using Disk Utility, but it gave me the same error. (Keep in mind that I am in Leopard during all this). I then attempt to restart, to see if maybe rEFIt changed something. I could not restart, due to my Mac not finding a boot drive (flashing folder with question mark). After a while of troubleshooting, I finally burned a rEFIt emergency CD and booted. I selected something like "Repair boot record" and restarted, which got rid of the flashing folder problem, but gave me "Cannot find operating system". I booted from the rEFIt CD again and selected "Boot from hard drive", which finally got me to boot Leopard. I went yet again into Terminal and tried a repairDisk, but I don't think that worked (since I was running off the internal drive). I booted from my Leopard CD and opened Disk Utility and tried: repairing the disk, repairing permissions, and partitioning. Repairing didn't find any errors, but partitioning gave me the same error as before, even though it is impossible to partition more than available in Disk Utility. I am currently sitting in Terminal, running off my Leopard CD, trying to figure out how to fix this. I have tried searching Google to no avail
Anyone have any idea on how to fix this? I could even do a reinstall if necessary, since I have a backup (good old Time Machine).
Summary:
Can boot from drive after booting rEFIt CD.
Can boot from Leopard CD.
Error when trying to partition.
Goal: make 3 partitions.
Thanks much!
JoshUpdate:
If I choose my boot partition as the Startup Disk while booted from the Leopard DVD and let it restart, it boots successfully. If I try to restart after that, I get "Error loading operating system" again. -
Error while taking a backup, BR0253E errno 28: NO space left on device
Dear Experts,
Since 2 days we are facing a problem with the online backup that is fired from DB13, the following is the error message that we are getting,
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdxultsi.ant 2008-04-28 12:15:52
BR0252E Function fflush() failed for '/oracle/PRD/sapbackup/bdxultsi.ant' at location main-9
BR0253E errno28: No space left on device
BR0121E Processing of log file /oracle/PRD/sapbackup/bdxultsi.ant failed
BR0561I End of database backup : bdxultsi.ant 2008-04-28 12:15:52
BR0280I BRBACKUP time stamp: 2008-04-28 12:15:53
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
We have checked with 2 different tapes, its the same problem still.
I understand that the problem is in initilization of the tape.
Please help me with this.. as we are not having a good backup since 3 days and its on the PRD server.
Reward points assured
Regards
HunkyHi,
First off all run CleanupLogs in DB13, if it is not working then check core files in /oracle/<SID>/saptrace/background/. If they are present move one of them to the other place, then again run CleanupLogs, after move back the core file, and again start CleanupLogs. Also check available space in sapbackup folder. After you can take your backup.
Regards,
Zeynal Aliyev
Edited by: Zeyn Ali on Oct 22, 2009 10:53 AM -
Error on install Solution Manager : Jcmon(error 4). No space left on device
Hi
I am having a problem installing Solution Manager 7.0 EHP1- AIX 6.1 DB2 9.7
During the unpacking phase error:
FCO-00011 The step unpack with step key was executed with status ERROR (Last error Reported by the step: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall / IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR, "finished with return code 4. Output
<html> <head> </ head> <body> <p> An error occurred while processing option <i> EhP1 SAP Solution Manager 7.0> SAP Systems> IBM DB2 for Linux, UNIX, and Windows> Central System> Central System (Reported by the last step error: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64 / DBINDEP / SAPEXE.SAR, "finished with return code 4. Output:
Sapce: processing archive / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR (version 2.01)
x jcmon
Sapce: error writing to / usr / sap / SMG / SYS / exe / run / jcmon (error 4). No space left on device).
Note: I downloaded the newest sapinst but not resolved.
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1296039
compile time: 26 Dec 2011 02:46:25
Media used:
51041320 - DB2 9.7 - Client
51041317_1 DB2 9.7 - RDBMS
51040438 - Export
51040437 - Installation Master
51040439 - Java SW Comp
51040584 - Kernel
Filesystem GB blocks Free% Used Iused% Iused Mounted on
/ dev/hd2 5:00 49 709 2.76 45% 8% / usr
/ dev/fslv00 15:00 15:00 15 1% 1% / usr / sap / SMG
any idea ?Hi,
The /usr/sap file system looks fine.
Could you also check the file space on the /tmp file system? This is usually less and SAPInst can fill this up very quickly.
Ideal to create a seperate SAPInst directory rather than use the default /tmp/sapinst_instdir.
Regards,
Srikishan -
Update problems, no space left on device (ZTE Open)
I just received a ZTE Open device in the mail today, and after playing around with it a bit, I noticed that every time I tried to check for system updates, it would show me one 13.xx MB update, which I downloaded, apparently applied, and the phone seemed to restart itself, but then I would be shown the same (??) update available. The phone is without a SIM card, just playing with it connected via Wifi, with the 4GB microSD card installed. Then, this evening, I got an error message, which apparently was recorded on the SD card, a file called recovery.log (contents follow):
<pre><nowiki>Starting recovery on Fri Aug 23 07:29:21 2013
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot mtd boot (null) 0
2 /amss mtd amss (null) 0
3 /appsbl mtd appsbl (null) 0
4 /mibib mtd mibib (null) 0
5 /qcsbl mtd qcsbl (null) 0
6 /oemsbl1 mtd oemsbl1 (null) 0
7 /oemsbl2 mtd oemsbl2 (null) 0
8 /splash mtd splash (null) 0
9 /cache yaffs2 cache (null) 0
10 /data yaffs2 userdata (null) 0
11 /misc mtd misc (null) 0
12 /recovery mtd recovery (null) 0
13 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0 0
14 /system yaffs2 system (null) 0
I:Got arguments from /cache/recovery/command
mtd: successfully wrote block at 0
I:Set boot command "boot-recovery"
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
ro.build.id=IMM76D
ro.build.display.id=OPEN_US_DEV_FFOS_V1.0.0B01
ro.build.version.incremental=eng..20130724.030603
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.sw_internal_version=US_DEV_FFOS_V1.0.0B01
ro.build.baseband_version=P752D04B02
ro.build.firmware_revision=V1.01.00.01.019.144
ro.build.date=2013年 07月 24日 星期三 03:06:47 CST
ro.build.date.utc=1374606407
ro.build.type=user
ro.build.user=
ro.build.host=ThinkCentre2-XXXX
ro.build.tags=test-keys
ro.product.model=roamer2
ro.product.external_model=ZTE OPEN
ro.product.brand=ZTE
ro.product.name=roamer2
ro.product.device=roamer2
ro.product.board=roamer2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=ZTE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7627a
ro.build.product=roamer2
ro.build.description=roamer2-user 4.0.4 IMM76D eng..20130724.030603 test-keys
ro.build.fingerprint=ZTE/roamer2/roamer2:4.0.4/IMM76D/eng..20130724.030603:user/test-keys
ro.build.characteristics=default
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=128m
persist.cne.UseCne=none
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.fmc.mode=false
persist.cne.fmc.init.time.out=30
persist.cne.fmc.comm.time.out=130
persist.cne.fmc.retry=false
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
ro.opengles.version=131072
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
persist.ims.regmanager.mode=0
ro.bluetooth.request.master=true
ro.qualcomm.bluetooth.sap=false
ro.bluetooth.remote.autoconnect=true
persist.sys.strictmode.visual=false
persist.omh.enabled=1
ro.config.ehrpd=true
ro.qualcomm.cabl=1
ro.fm.analogpath.supported=true
ro.fm.transmitter=false
ro.fm.mulinst.recording.support=false
ro.hw_plat=7x27a
ro.emmc.sdcard.partition=18
ro.screen.layout=normal
debug.enabletr=false
debug.camcorder.disablemeta=0
persist.fuse_sdcard=false
debug.camera.landscape=true
ro.max.fling_velocity=4000
hwui.render_dirty_regions=false
httplive.enable.discontinuity=true
power.webview.DM=false
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=36m
org.bluez.device.conn.type=boolean
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.display.colorfill=1
ro.moz.ril.emergency_by_default=true
ro.moz.omx.hw.max_width=640
ro.moz.omx.hw.max_height=480
ro.moz.cam.0.sensor_offset=270
ro.moz.ril.simstate_extra_field=true
persist.sys.ztelog.enable=1
persist.radio.add_power_save=1
ro.sensor.arch.type=new
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=ROAMER2
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=roamer2
ro.revision=0
ro.emmc=0
init.svc.recovery=running
E:Error in /cache/recovery/log
(No space left on device)
E:Error in /cache/recovery/last_log
(No space left on device)
mtd: successfully wrote block at 0
I:Set boot command ""
E:Error in /cache/recovery/log
(No space left on device)
E:Error in /cache/recovery/last_log
(No space left on device)</nowiki></pre>
The SD card also contains a zip file in updates/fota/update.zip, which in turn contains patch/system/P752D04_DEV_US_20130726.zip, which contains: amss.mbn (about 20 meg) and boot.img (about 4 meg).Just jumping in here, I received mine on the 23rd and I am also seeing the same problem, but the logs are a bit different. Although, I am running OPEN_US_DEV_FFOS_V1.0.0'''B02'''. While the recovery log states B01.
I'll toss my log up as well so trends can be examined.
Starting recovery on Sun Aug 25 07:04:10 2013
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot mtd boot (null) 0
2 /amss mtd amss (null) 0
3 /appsbl mtd appsbl (null) 0
4 /mibib mtd mibib (null) 0
5 /qcsbl mtd qcsbl (null) 0
6 /oemsbl1 mtd oemsbl1 (null) 0
7 /oemsbl2 mtd oemsbl2 (null) 0
8 /splash mtd splash (null) 0
9 /cache yaffs2 cache (null) 0
10 /data yaffs2 userdata (null) 0
11 /misc mtd misc (null) 0
12 /recovery mtd recovery (null) 0
13 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0 0
14 /system yaffs2 system (null) 0
I:Got arguments from /cache/recovery/command
mtd: successfully wrote block at 0
I:Set boot command "boot-recovery"
Command: "/sbin/recovery" "--update_package=/sdcard/updates/fota/update.zip"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
ro.build.id=IMM76D
ro.build.display.id=OPEN_US_DEV_FFOS_V1.0.0B01
ro.build.version.incremental=eng..20130724.030603
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.sw_internal_version=US_DEV_FFOS_V1.0.0B01
ro.build.baseband_version=P752D04B02
ro.build.firmware_revision=V1.01.00.01.019.144
ro.build.date=2013年 07月 24日 星期三 03:06:47 CST
ro.build.date.utc=1374606407
ro.build.type=user
ro.build.user=
ro.build.host=ThinkCentre2-XXXX
ro.build.tags=test-keys
ro.product.model=roamer2
ro.product.external_model=ZTE OPEN
ro.product.brand=ZTE
ro.product.name=roamer2
ro.product.device=roamer2
ro.product.board=roamer2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=ZTE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7627a
ro.build.product=roamer2
ro.build.description=roamer2-user 4.0.4 IMM76D eng..20130724.030603 test-keys
ro.build.fingerprint=ZTE/roamer2/roamer2:4.0.4/IMM76D/eng..20130724.030603:user/test-keys
ro.build.characteristics=default
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=128m
persist.cne.UseCne=none
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.fmc.mode=false
persist.cne.fmc.init.time.out=30
persist.cne.fmc.comm.time.out=130
persist.cne.fmc.retry=false
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
ro.opengles.version=131072
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
persist.ims.regmanager.mode=0
ro.bluetooth.request.master=true
ro.qualcomm.bluetooth.sap=false
ro.bluetooth.remote.autoconnect=true
persist.sys.strictmode.visual=false
persist.omh.enabled=1
ro.config.ehrpd=true
ro.qualcomm.cabl=1
ro.fm.analogpath.supported=true
ro.fm.transmitter=false
ro.fm.mulinst.recording.support=false
ro.hw_plat=7x27a
ro.emmc.sdcard.partition=18
ro.screen.layout=normal
debug.enabletr=false
debug.camcorder.disablemeta=0
persist.fuse_sdcard=false
debug.camera.landscape=true
ro.max.fling_velocity=4000
hwui.render_dirty_regions=false
httplive.enable.discontinuity=true
power.webview.DM=false
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=36m
org.bluez.device.conn.type=boolean
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.display.colorfill=1
ro.moz.ril.emergency_by_default=true
ro.moz.omx.hw.max_width=640
ro.moz.omx.hw.max_height=480
ro.moz.cam.0.sensor_offset=270
ro.moz.ril.simstate_extra_field=true
persist.sys.ztelog.enable=1
persist.radio.add_power_save=1
ro.sensor.arch.type=new
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=ROAMER2
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=roamer2
ro.revision=0
ro.emmc=0
init.svc.recovery=running
Finding update package...
I:Update location: /sdcard/updates/fota/update.zip
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1746 bytes; signature 1728 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
try_update_binary(path(/sdcard/updates/fota/update.zip))
radio.diff not found
Verifying current system...Failed to mount /dev/block/mtdblock4 on /cache: Device or resource busy
mtd mount of cache failed: Device or resource busy
51191808 bytes free on /cache (5714 needed)
applying patch to /system/build.prop
"/system/build.prop" is already target; no patch needed
Removing unneeded files...
Patching system files...
Symlinks and permissions...
script result was [/system] -
Disk Utility errors: No such file -or- No space left on device (50GB+ free)
I am trying to make an image out of a _NTFS formatted_ parition, using around 4,5GB of data, of a freshly installed Windozs. It's for debugging tons of machines I have been given (to debug..) and I need an image done. Note that debating if using an image as a solution is good or not is not the point of this thread.
When I try to make a new image out of the parition (clicking "New Image"), using the defaults settings, I enter my admin pass, then I'm being shown "No space left on device". Wierd. The device I am writing the image onto has 51GB left, and the Trash is emptied.
I tried changing the image format to all the possible types in Disk Utility, but I get the same error: No space left on device.
I then changed the device, this time I used a volume with 10GB free on it. Then, I only managed to get a standard DMG compressed image, where I need a "DVD/CD master" one. I'm still confused, because no other image type worked.
Then I tried making a new image (not from a disk or volume, empty) and then just copy data to it (I'm sure it's really not the way to go, but still). After creating the empty image (I opted for an 8GB, DVD burnable style, "DVD/CD master"), I got the wierd error: No such file (straigth after the image creation, in Disk Utility).
More info about volumes and stuff:
Data to be imaged:
A single partition on a volume (connected with IDE to Mac Pro, but I don't see why it would matter)
Where I can save it:
I got a big bunch of volumes right here, internally.
I tried one with 50GB free, but failed. Another one, on another disk, with 10GB, but failed.
Also, this error comes often in Disk Utility and other unix OS I think, and mostly for no real known reason (in OS X), as most issues I found were still unresolved.
Thanks for any helpHey,
Im having the same exact problem.
Toast even says it has a medium error with this drive.
I cant burn with toast and it wont play other DVD-R movies
that I have burnt on other systems.
What is the fix? -
E=28 semget(20038,1,2047) (28: No space left on device) on Solaris 10
We are running 5 SAP ECC 6.0 systems on Solaris 10 with the project definitions configured as mentioned in note 724713.
Now after the fifth system was installed, we have problems to start all of the systems.
The error can occur for either of the systems and in dev_disp it would say:
ERROR => e=28 semget(20038,1,2047) (28: No space left on device) [semux.c 928]
ERROR => CCMS: SemInit failed [alxxappl.c 610]
ERROR => CCMS: sAlInit: could not create/attach shared memory key 13 (rtc = 255) [alxx.c 1187]
Before the fifth system was installed, we didn't experience any problems.
Do we have to change the project definitions and if yes how?
We have defined 5 projects (each system) with the following values for each project:
SD2:200:SAP System SD2:orasd2,sd2adm::process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-ids=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)
Best Regards
WalterI have changed the project vith projmod it looks now like :
htudv# projects -l `projects -d sd2adm`
SD2
projid : 200
comment: "SAP System SD2"
users : orasd2
sd2adm
groups : (none)
attribs: process.max-sem-nsems=(priv,2048,deny)
project.max-sem-ids=(priv,1024,deny)
project.max-shm-ids=(priv,1024,deny)
project.max-shm-memory=(priv,18446744073709551615,deny)
htudv#
But when I start SD2 I still get:
ERROR => e=28 semget(20038,1,2047) (28: No space left on device) [semux.c 928]
ERROR => CCMS: SemInit failed [alxxappl.c 610]
And what confuses me is that all the processes started under sd2adm I watched with
prctl -t privileged <pid> , have a value like
project.max-shm-ids
privileged 128 - deny ???
Why not 1024 as defined in the project?
BR
Walter -
Linux-x86_64 Error: 28: No space left on device
10gR2 (10.2.0.3)
RHEL 4 AS 64-bit
Hi All,
After I created my RAC database with DBCA, I tried to connect to the database and got the following error:
SQL> startup
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
SQL> startup pfile='/opt/app/oracle/product/10.2.0/db_1/dbs/initFPRCPROD.ora'
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
SQL> startup mount pfile='/opt/app/oracle/product/10.2.0/db_1/dbs/initFPRCPROD.ora'
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
I also tried to do what the following person did:
ORA-27102: out of memory
But changing the SHMALL kernel parameter still didn't change anything...I still got the error.
Any ideas?
Thank you.(Duplicate thread)
ORA- 27102 out of memory and Linux Error: 28: No space left on device -
O/S Message: No space left on device
Oracle 10.2.0.4, Solaris 10 x86
In SqlPlus I run a script that executes different tasks like inserts, updates, recreating of synonyms. The script is suddenly terminated by an error O/S Message: No space left on device:
SQL> CREATE OR REPLACE SYNONYM myuser.tablename FOR tablename;
Synonym created.
Elapsed: 00:00:00.00
SQL>
SQL> O/S Message: No space left on device
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
bash-3.00$This is an excerpt from the running of the script - the last CREATE statement and the following error.
I google for it and according to various posts I tried to increase the values in /etc/system file this way:
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmns=32000
set semsys:seminfo_semmsl=256
set semsys:seminfo_semmni=128
set semsys:seminfo_semvmx=32767
set noexec_user_stack=1The I also tried to modify the project of the os user oracle and now it looks like this:
group.dba
projid : 100
comment: "Project for oracle os user and members of dba group"
users : (none)
groups : (none)
attribs: project.max-msg-ids=(priv,256,deny)
project.max-sem-ids=(priv,100,deny)
project.max-sem-nsems-ids=(priv,256,deny)
project.max-shm-ids=(priv,100,deny)
project.max-shm-memory=(priv,4294967295,deny)However, when I rerun the sqlplus script I still end up with the same O/S message: No space left on device.
This is the ouput from the command df -h:
ash-3.00$ df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c0d0s0 17G 8.4G 8.1G 51% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 959M 992K 958M 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
17G 8.4G 8.1G 51% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 959M 76K 958M 1% /tmp
swap 958M 44K 958M 1% /var/run
/dev/dsk/c0d0s7 6.9G 6.8G 0K 100% /export/home
/hgfs 16G 4.0M 16G 1% /hgfs
/tmp/VMwareDnD 0K 0K 0K 0% /var/run/vmblockWhat needs to be fixed here? Thank you very much!Filesystem /dev/dsk/c0d0s7 looks full. You must look at your alert.log file it tell you where the problem is.
HTH
Antonio NAVARRO -
Internal error during pvc call: No space left on device (errno:28)
Hi
When we am exproting the objects ( using File System) we are getting the following error
Internal error during pvc call: No space left on device (errno:28) For more information, see the server log.
Please help us how to resolve this problem
Thanks & Regards
SowmyaHi
Check with the export directory file system. Looks like space issue for the .tpz you are trying to export.
Thanks
Gaurav -
Partition failed with the error: No space left on device
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore -
Syncing error - "no space left on device"
I recently did a reset on my phone and now have Spotify syncing to my SD card. Music has been syncing correctly but after a while (such as when I tried to sync another playlist today) I get the following error. "Syncing error Offline syncing has stopped as there's no space left on this device." However, there definitely should be space left. The SD card shows 26.48 GB free out of a total 29.76 GB. (That's 3 GB used for the existing spotify cache. For what it's worth, there äs also 1.1 GB free on the device memory and 3.74 GB free in the internal storage. I have already tried clearing the Spotify cache and re-syncing everything but the same error comes up after a while. Is there some kind of limit coded into the app? Any what to get all my music to sync?
Hey! Thanks for your message. I was busy at work this week so I didn't have a chance to test it till today. I went through all the steps (hadn't tried a restart in the middle before) and even formatted the external SD card. I put it on to sync and this time it stopped after 2.6 GB. Same error message. Any other suggestions? Here are some more details. What are the steps you took to get to the error/issue?
(We need to know what you are doing so we can do the exact same to try and get the same error)
1. Followed part B of the troubleshooting guide, including a format of the external SD card after uninstalling the app.2. Installed Spotify and put a bunch of playlists on to download. (About 1100 songs.)3. After a couple hours and having downloaded 2.6 GB I got the "no space left on device" error. What I expected to happenI expect it to download all my playlists because Android reports that the SD card has over 27 GB free. Did you restart your device when troubleshooting in section B?Yes Did you read the connection troubleshooting tips?No (doesn't seem applicable) Your device
Sony Xperia Go (ST27i) Device’s Operating System4.1.2 What type of account do you have?Premium (FYI for the below points: Android devices tend to refer to the internal memory as "SD Card" and the SD card you inserted yourself as "External SD Card")Space left on your device1.04 GB Space left on your SD card (if applicable)
3.73 GB Space left on your External SD card (if applicable)
27.21 GB Is your device rooted?No Are you using a custom ROM, if so which one, exactly?No Did you set your external SD card as storage location?No (not manually, it was automatic) Did you manually install an older version before installing the latest version from the Play Store?No Do you have the same issue when switching between WiFi/Mobile Data (If applicable)?not applicable If you said "No", when does the issue not occur?not applicable
My mobile Spotify version0.6.0.20 My desktop Spotify version (if applicable)not applicable My mobile provider and countryComiq, Sweden My usernameDarcy Do you have a Spotify (non-Facebook) login?Yes (but not in use on this phone) Are you logging in with Facebook or with your Spotify login details?Facebook -
10g XE: ORA-27102: out of memory, Linux Error: 28: No space left on device
Hi,
I just installed oracle-xe-10.2.0.1-1.0.i386.rpm on a virtual CentOS box. After I run "/etc/init.d/oracle-xe configure", only listener is running, not the instance itself and $ORACLE_HOME/config/log/CloneRmanRestore.log says
ORA-27102: out of memory
Linux Error: 28: No space left on device
According to installation requirements (http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm) I checked
RAM and swap:
[root@56 ~]# free -m
total used free shared buffers cached
Mem: 7961 7453 507 0 39 923
-/+ buffers/cache: 6491 1470
Swap: 16378 7012 9366
Available disk space:
[root@56 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vzfs 2.9G 969M 1.9G 34% /
Kernel params:
[root@56 ~]# sysctl -a | egrep 'sem|shm'
error: "Operation not permitted" reading key "kernel.cap-bound"
kernel.sem = 250 32000 100 128
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 536870912
So it all looks to be OK.
Any ideas what can be wrong?
Thanks,
Radekrskokan wrote:
The distro version is "CentOS release 5.4 (Final)".
Unfortunately the wmem/rmem params can't be changed, as I learned it's a limitation of the virtual hosting, Virtuozzo. Anyway they are "just" for network setting, not for RAM.Yes - but worthy of noting once you run into your next problem. :-)
>
Couldn't be the problem that I really don't have enough disk space? Only 1.9 GB free.It's unlikely.
I suspect that the SHMMAX setting needs to be increased to 1/2 physical RAM, as described in the doc I referenced.
I suspect the installer is looking at the physical RAM and guessing the target SGA size based on that. It would therefore assume, for DB creation, that it should crank the SGA to around 700MB (1GB max, leave some for PGA, but use some SGA because of SHared Server for APEX)
Maybe you are looking for
-
It keeps comming up cannot connect to itunes store
it keeps comming up cannot connect to itunes store
-
Using Adobe Document Services PDF opening in separate window
With EP 7.0 SP13 and WebDynpro for ABAP we are using Adobe Document Services to create a Print Preview with a PDF. This is not an Interactive PDF. In most cases the functionality is working correctly. We have one user where the PDF opens in a sep
-
Can Tooltips be used with Page View data sets?
Does the Tooltip widget alway look only at {ds_CurrentRowID} ? Since my Tooltip content area is displaying a spry:detailregion of items in a paged view it will only display data from the first row of each page. Is there a way to work around this? tha
-
IOException on httpURLConnection.getInputStream();
Hello ! I have written some code to transfer a HTTP Request received on a servlet... but I'm catching an IOException when getting inputstream at the end.... I though that adding a setDoInput(true) would solve the problem but the code stops on it inst
-
Performing ldapsearch filtered by non-string value
Hi all. I'm using OID as my central users repository. I know how to perform ldapsearches with filters like (cn=*) and (objectclass=*) In OID there is an attribute of type binary called orclobjectsid. When I'm trying to perform search with filter (orc