Creating a graph with 2 Axis

Post Author: KatyLu
CA Forum: Xcelsius and Live Office
I am really struggling with how to create a graph with 2 Axises.  I have changed my Excel sheet around numerous ways and am unable to get it to work for me, does anyone have any insight on how I can make this work, I reaaaalllyyy need it for an upcoming presentation!!! Help!

Post Author: KatyLu
CA Forum: Xcelsius and Live Office
Sorry if I confused...I am needing to create a graph with scales on both sides.  For example, revenue would be on the scale on the left and headcount needed to generate the revenue would be on the right scale.  Revenue scale would be between 1M and 6M, headcount scale would be in the hundreds, does this help describe what I am trying to do?  I used the Combination Chart in xcelsius and when I try to set the scale range for the x-axis minimum and maximum it is grayed out... Any help would be greatly appreciated.

Similar Messages

  • How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

    How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

    Hi Libby,
    Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
    Click the Charts button and choose the Scatter chart.
    The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
    Click the gear icon at the top left of the selection and choose Share X Values.
    You should see a result similar to this:
    Notes:
    The values on my sample table contain a random element, so they have changed from thhe first image to the second.
    The chart is as created by Numbers, with two edits:
    Data points have been connected with curves, using the Chart nspector.
    The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
    Regards,
    Barry

  • How to create ONE graph with a growth trend ($ and %)?

    I would like to create a graph with a growth trend.
    The graph should have figures on one side reflecting $ values and on the other % growth.
    I cannot make a trend on the same graph and usually spend ages adding another graph to show the trend. I end up making 2 graphs instead of one.
    Please refer to the following really basic graph that will give you an idea.
    ex : http://www.tellurideareahomes.com/images/graph1.jpg
    Can anyone show how to do that?

    What you want requires a bit of trickery.
    Chart the bar graph
    Chart the trend
    then move the trend one above the bar one after setting its background to none.
    If this workaround is not OK for you,
    _Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'09 (possibly for iWork '99)
    Yvan KOENIG (from FRANCE mercredi 19 novembre 2008 11:18:45)

  • How do I create a graph with regression lines?

    Hi,
    I have a simple query that returns 2 columns of variable numeric data that I would like to create a chart from.  By using a numeric axis line chart I've been able to plot the individual points.  However, I now want to add a regression line based on those points.  The regression line could be a simple linear regression, a quadratic regression, or more complex 3 or 4 parameter regressions.  Is this possible?
    There could be a number of ways of creating the parameters (eg slope and intercept for a linear regression):
    a) Crystal Reports could calculate them whilst drawing the line
    b) I could create a formula that provides the parameters that CR could use to plot the line
    c) I could return the parameters from the database as part of the same or a separate query.
    Thanks

    Hi Colin,
    I just added a regression line to one of my charts yesterday   I did it by right clicking on the line (or in my case it was the bar) on the graph.  Then I picked Trendlines.  There are about 16 different formulas available.  I picked Linear Regression for mine and it gave me exactly what I needed. 
    Hope that helps,
    Cyndi

  • How to create a webservice with axis specific WSDL

    Hi all
    I want to know if anybosy can provide with me any documentation or information link from where i can find the way how to deploy webservices using axis specific WSDL(i mean WSDL is created using axis jars) on to the application server like Weblogic.
    I would like to know the following
    1 - How to create the web.xml
    2- How to create the deployment descriptor.
    3- How to pack the EAR or WAR file.
    Thanks and Regards
    Manoj

    You can't as File is nor serializable. It won't make sense as you would try to give a handle to a file on the server hosting the service to a remote system.
    Can you explain the use case in more detail?
    Timo

  • Create a Graph with only one set of data? Threw serial

    I feel this is a simple question, but I am over thinking it. I am trying to make a program that takes data that is sent threw serial Rs232 from a device, and put that data both into a file and display a live graph of the data (saving the graph would also be great). The devise is strait forward it gives me data when it is don't making the test. After it has the data is sends it and it is always in this form, (ignore Quotes) "[ 122.8 PSI     ]' where "122.8" will always be 5 characters and the decimal point stays the same.
    I would like to take Ex. 122.8 and plot that on y and use the line number from the text file as the x value. How can this be achieved?
    Currently I am displaying the values in a list because I can't figure the graph out. But attached is my messy code and a sample of data that gets sent.
    P.S.. The data list can get as long as 2000 or more.
        side question... when the program is built into an EXE when using serial, can the user change what port?
    Attachments:
    test 1.vi ‏20 KB
    test 1.txt ‏1 KB
    test 1 graph.txt ‏1 KB

    Well, that's called Rube Golberg code.
    All that you have to do is convert the string to a numeric (i.e. a single Scan From String not your match pattern functions) and wire it to a chart. The chart's x axis by default will increment by 1 with each sample written so reading the x axis from file is silly. Be sure to set the chart history. Since you are already writing the data to file, why write it again? Either write the full string or just the value. Your second while loop becomes unnecessary and if for some reason you needed it, it would only record the very last value.
    Don't open the file with each iteration. Place that outside the loop.
    You might want to take the free LabVIEW tutorials.

  • Creating a report with multiple Y-axes on one graph

    I currently have a script that will create a report with either 1, 2, or 3 graphs and has the ability to have four graphs per plot.  I would like to add functionality to this script by making the Y-axis on the graphs have multiple Y-axes.  How can I programmatically create a graph with multiple Y-axes?

    To create an new axis system use the command GraphObjNew, eg:
    Call GraphObjNew("2D-Axis","2DAxis1")
    Call GraphObjOpen("2DAxis1")        
      D2AxisBackColor = "blue"  
    Call GraphObjClose("2DAxis1") 
    Call PicUpdate
    If you have DIAdem Version 10 you can also create a new y-axis using GraphObjYAxisNew. This command is not available in versions 9.1:
    Call GraphObjOpen("2DAxis1")
    AxisNo = GraphObjYAxisNew("left")
    If AxisNo>0 Then
      Call GraphObjOpen(D2AxisYObj(AxisNo))
      D2AXISYTXT ="My new axis"
      D2AXISYTXTFONT ="Arial"
      D2AXISYTXTCOLOR ="red"
      Call GraphObjClose(D2AxisYObj(AxisNo))
    End If
    Call GraphObjClose("2DAxis1")
    Winfried
    Message Edited by winner on 03-23-2006 03:48 PM

  • Creating a chart with a tertiary axis

    Hello all,
    I was wondering if it is possible to create a graph with a tertiary axis, along the lines of this:
    http://peltiertech.com/Excel/Charts/TertiaryAxis.html
    I have such a graph that I created in Excel, but when I import it into Numbers, it says that those types of charts are not supported. Is there any other way to create such a graph in Numbers?
    Message was edited by: Kyle DePasquale

    We may mimic the feature with two superposed 'normal' charts.
    Yvan KOENIG (VALLAURIS, France) lundi 15 février 2010 08:59:46

  • Ploting a XY graph with 2 y axis vs single x axis

    Hi ,
       I am trying to plot a XY graph with 2 Y axis in left hand and right hand sides vs a single X axis.
    Using duplicate scale and swap scale am able to create the graph with 2 Y axis but am not able to connect the 3 arrays to the graph.  I am using labview 8.0 and with this am attaching a sample code also. please help me for that..
    thanks in advance..
         Nikhil
    Solved!
    Go to Solution.
    Attachments:
    sample.vi ‏12 KB

    Find the vi in 8.0
    Balaji PK (CLA)
    Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
    Attachments:
    sample.vi ‏12 KB

  • How to create a graph(9i reports) with 3 queries in 1 Chart

    Hi, i have 3 query's which creates three groups.
    The x-as is de month,month1,month2.
    The Y-as ClaimsInEURO.
    There has to be one BAR which displays the top10 reasons.
    And two lines one with Total Claim and one with SUM Claim.
    Can onyone explain me the settings and especially how to set the groups?

    Hi,
    You may not be able to create one graph with multiple queries. You must get all the data into ONE query, and create a graph based on that query.
    Navneet.

  • How to add a secondary axis on a excel graph with labwindowsCVI?

    Hello,
    I am currently working on LabWindowsCVI and I treat my data in excel files. I use ExcelReport and Excel2000 instruments to build my data tables and my graph. To trace, I use this function:
    ExcelRpt_ChartWizard (chartsheetHandle, ExcelWorksheetHandle, "A1: C619" ExRConst_XYScatterSmoothNoMarkers 0, ExRConst_Columns, 1, 1, 1, "Consumption mobile plateform", "TIME (sec)", "Current / Voltage (in V & A in)" , NULL);
    In this configuration, column A is X axis and B & C (Y axis) my respective data voltage & current.
    My graph are traced correctly, but I find a problem, 2 curves are on the main axis and I want to trace one on the main axis and the other on the secondary axis. I can't to display a secondary axis.
    Does this action is it possible with a LabwindowsCVI function and if so, can you tell me that function?
    Thank you in advance,
    Nicolas
    Solved!
    Go to Solution.

    Hi! nlepouliquen,
    First of all, I believe you have two curves successfully plotted on the chart as you mentioned.  Excel asigns these two curves as data series 1 and 2 internally.  Assume you want to change series 2 to be plotted against the sencond Y-axis.  You can use the following two functions, defined in excel2000.c, to do it.
    // select series 2 data
    Excel_ChartSeriesCollection (chartsheetHandle, NULL, CA_VariantInt(2), &seriesTwoHandle);   
    // create the second Y-axis and plot series 2 data against it
    Excel_SetProperty (seriesTwoHandle, NULL, Excel_SeriesAxisGroup, CAVT_LONG, ExcelConst_xlSecondary);

  • How to draw xy graph with multiple y axis input?

    Hi,
    I have problem in xy graph, the xy graph only can show 1 signal from the y axis input ( As you can see in the attachment )
    Is it possible to draw xy graph with 2 Y input? Or maybe there are another type of graph that possible to do this? 
    Note:  the x axis should be from an input too ( not versus time / sample ).
    All answer and advice are welcomed.
    Best regards,
    Alvin Chandra 
    Solved!
    Go to Solution.
    Attachments:
    Example.vi ‏139 KB

    Are you asking for a second Y scale on the graph?
    If so, right click on the existing scale, select "Duplicate Scale". This will create a second scale. You can then (if you wish), right click on the new scale a select "Swap Sides" to put it on the other side of the graph.
    Are you asking about adding a second plot?
    If so then you need to bundle your arrays of X and Y points into clusters and build those into an array:
    The X-axis is always from an input on the XY Graph. You just need to change the axis title. Easiest way to do this is to double click on the axis title and type the new name.
    Rob

  • I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
    -Kevin P.
    Message Edited by Kevin Price on 12-01-2006 02:42 PM
    Attachments:
    Binning example.vi ‏51 KB
    Binning example.png ‏12 KB

  • Is it possible to create graph with in the table / Pivote table.

    Is it possible to create graph with in the table / Pivote table.
    Emp# Emp Name % Bonus Pay Amt
    111 AAA $28276
    222 BBB $78878
    In the place of Bonus I have to display Bar (Chart) instead of number.
    Is it possible in OBIEE? I know we can display chart and table next by next but my user want display just like above.
    Please help me on this issue
    Thank you very much for your time

    hi,
    it is better for 2 different questions,make 2 differents threads...
    You used the 2ond solution(google???),put in the dashboard...html enabled...and check your pdf again.
    Moreover,printing pdf with answer is discouraged...always prefer Xml Publisher.
    Last,there are 2 fst files which configure the *.pdf files , check them,
    http://obiee101.blogspot.com/2008/09/obiee-pdf-controls-fst-files.html
    hope i helped....
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Issue with Date Format in line Graph X-AXIS

    Hi all,
    I have a line graph, with data in x-axis and integer values in y-axis.
    I am fetching data in Mon-dd-yyyy format but in graph (x-axis) it showing in yyyy-mm-dd format.
    How to change this format.
    Regards,
    Krishna Prasad

    Hi,
    Basically you are trying to convert a date into date which is not advisable. Hence convert it to char and then equate it against a character value. Also do not use trunc as it will trim out the time part of the date.
    select * from test
               where to_char(dob,'RRRR/MM/DD HH24:MI:SS')=:p1Then pass the parameter
    cheers
    VT
    Edited by: VT on Oct 26, 2010 4:16 PM

Maybe you are looking for

  • How to Identify GP Process ID from Process Instance ID

    Hi, I am retrieving the running process instances using following method. IGPProcessInstanceInfo[] runningInstances =                     runtimeManager.getRunningInstances(                          GPSearchRole.SEARCH_ROLE_OVERSEER,                 

  • How do you make Safari open using the homepage in Lion.

    While using Safari in Lion, Safari wants to open each time with the last page used. How do I change it to open with the homepage?

  • Sub report issues

    Post Author: JorgeLopez CA Forum: General hi everyone I got a subreport and it has 3 fields on one side and other 3 in another side. the question is: I got this situation day month year                     c1 c2 c3 05 10 2007                        a

  • "Remote Desktop connection has stopped working." problem in Windows 8

    here is the event log.  Only happens on a few of our servers Faulting application name: mstsc.exe, version: 6.2.9200.16384, time stamp: 0x50108ae1 Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505ab405 Exception code: 0xc000

  • Xp-310

    I just got a Epson Home XP-310 printer and it is not working at all. I got to the part where I needed to let the ink prime and then it said paper jam. WHEN there was no paper in the printer. How do I fix that?