Creating a mask within a drop zone

Hey,
Does anyone know if it is even possible to create a mask within a drop zone or the video assets so I can essentially cropping off the black bars in my 4:3 Letterbox video. Was shot on the Panasonic DVX100.
Chris

Hey,
I'm creating my chapter/scene selection index/menu and I am wanting to find a way to re-shape the mask so I can reveal more of a still on the drop zone. The way the mask is setup is it is cropping off too much of my frame. Whenever I adjust the media handles all that does is change the size of the drop zone which isn't what I want to do. I just want to drag more of the frame over.
Any idea how to do this? The manual does not help and I am trying to Google to find my answer. No luck so far.
Chris

Similar Messages

  • How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

    How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

    I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
    If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
    If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
    If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

  • Upgrade to Final Cut 10.0.7 destroyed my generators created in Motion that include drop zones. Anyone experienced the same problem ?

    In Motion 5 I created generators that included a drop zone. The objective it to bring them into Final Cut and insert into the drop zone a clip of the same duration.
    In FCX 10.0.6 I used to bring a clip to the time line and re size it to the exact duration of my generator. Then I bring the generator to the time line and selected the generator, click in the drop zone of the published parameters menu and select this clip I wanted to insert. The result was the generator using my clip and the clip playing during all the duration of the generator with the generator effect.
    Now, with 10.0.7 I can’t make that work. When I click in the clip I would like to import into the drop zone, the result is that there’s just a frozen image of the clip (in the same place I clicked with the mouse)
    Is this a known problem of 10.0.7. It used to work well in 10.0.6
    Thanks for your help !

    I can't see that the update would have any effect on custom generators as they are housed separately from FCP X.
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • Scaling within a drop zone

    I'm working in MOTION 3.
    I'm working with a template that has drop zones into which you're intended to place pictures or video.
    When I drop the pictures in, they are too large...meaning parts of the picture are being cut off,
    or are outside the parameters of the rectangular drop zone.
    I want to scale the pictures down so they are completely visable in the drop zone, but I don't
    want to change the overall size of the drop zone itself...I want the rectangular box (the drop zone)
    to remain the same size.
    I know how to scale the drop zone itself, but not the image that I'm placing inside the drop zone.
    Minimally, I need to be able to move the image I dropped into the drop zone around in there,
    so I can see the most important part of the image.
    Any assistance would be appreciated.

    In Motion 4, you'd be able to use the Link behavior to make a scale adjustable template... ala: Mark's tutorial (thanks Mark!)...
    With Motion 3, I'd say edit the template. You have the option to save it just for this use, or globally. I'd say make your adjustments on a use by use basis...
    Patrick

  • Re-size within a drop zone

    Is there any way for me to re-size my video once it's been place into a drop zone? Shrink or otherwise?

    In Motion 4, you'd be able to use the Link behavior to make a scale adjustable template... ala: Mark's tutorial (thanks Mark!)...
    With Motion 3, I'd say edit the template. You have the option to save it just for this use, or globally. I'd say make your adjustments on a use by use basis...
    Patrick

  • Rounded corners from image mask disappear with Drop Zone

    Hi All,
    I'm really stumped here. I'm on Motion4 and per directions from other posts I have used the following method to attempt a mask shape. The desired outcome is a photo that has a nice square shape with rounded corners.
    1. Using a photo on the canvas.
    2. In the layers menu, I click on the image and select, Add Image Mask
    3. In the inspector I go to Image mask and drop in Frame17 from the contents folder.
    The problem...every time the rounded corners from the shape seem to disappear. Can anyone tell me what I did wrong? Or suggest another method.
    Additional info from Image Mask Tab: Source Channel is set to Alpha, Mask Blend Mode is set to Add, automatically-I did not set these.

    When you say that the rounded corners seem to disappear, what do you mean exactly? Are they there at first, but then disappear after you start playing the sequence? Or do the rounded corners not happen at all?
    If the corners start, but disappear after playing the project, then it probably means that the Frame 17 image from the content folder is not as long as the image mask. As soon as the Frame ends, it will stop providing the source for the image mask. Fix this by making sure that Frame 17 is at least as long as your image mask.
    Alt way, and easier unless you're working in a 3D project, is to simply draw a rectangle mask around your photo and in the Mask tab of the inspector, adjust the roundness parameter until the corners are sufficiently rounded to your liking.
    andy

  • Adding Pictures/Video to Drop Zones

    Hello All,
    I've created a drop zone in motion and saved it as a master template. However when I bring it into FCP I have no idea how to place my footage into the drop zone. Whenever I drag something into the canvas it just overwrites the template.
    Also, can images/footage be resized and animated within a drop zone?
    Thanks!
    rT

    Thanks Jerry, I can't believe I missed that.
    It seems though I can only animate the drop zone as a whole and not the picture/ video inside the drop zone. Is there a way to do that. For example I may want a picture inside the drop zone to scale up a bit. However the scale parameters on the motion tab only control the drop zone as a whole - not what is within it. Is threre any way to resolve this?
    Thanks.

  • Converting Drop Zone to a Circle

    How do you create a drop zone as a circle instead of a square in Motion 3? I want to create 5 or 6 circle drop zones, but can't figure out how to do this. Any help would be appreciated. Cheers.

    You don't have to email me personally if you're having problems. You should just continue to reply to the thread so that others with the same issue will know how to solve the problem.
    In response to your email to me:
    Hi Andy, thanks for the suggestion on who to "Converting Drop Zone to a Circle", but I still don't know how to do that. Can you please help me. Please.
    You should really read up in the manual about masks. It's a very elementary part of Motion (and every other motion gfx program). There is a shape mask tool on the toolbar. You use that tool to mask a layer such as your drop zone. The result is that only the portion masked off is visible. If you use the circle mask tool, then you'll be left with a circle drop zone.
    Andy

  • Resize Pictures for Drop Zone?

    I read a thread from about a year ago that brought up resizing images to get them to fit in a drop zone correctly. I just started using idvd and just ran into this problem, and it truly annoys me that Apple wouldn't allow resizing and image within idvd to get it to fit, or drag what part of the image shows in the drop zone...
    Anyone have a solution, or is this still a "pay to get it" type of thing with pro tools...

    So what you really need is to reposition the image within the drop zone (as opposed to resizing) .... is this correct?
    If so, have you already tried holding down the control key as you click and drag the image to the desired position?
    Repositioning an image or movie in a drop zone
    When you drag a picture or movie into a drop zone, the aspect ratio of the image is preserved, but it is scaled larger or smaller to fill the drop zone. As a result, sometimes part of the image is cut off and does not appear in the drop zone. In this case, you can move the image to choose which portion is visible in the drop zone.
    To reposition an image or movie in a drop zone:
    From the drop zone on the menu (not in the drop zone editor), click the image or movie and press Command.
    Drag the image until the part you want is visible in the drop zone.
    Keep these things in mind as you position an image:

    If you drag a narrow image to a drop zone, the image is scaled vertically, and you can move the image up or down only.

    If you drag a wide image to a drop zone, the image is scaled horizontally, and you can move the image side to side only.

    If you accidentally drag the image too far, you will remove it from the drop zone. (The cursor changes from a hand to a puff of smoke.) Choose Edit > Undo to restore the image to the drop zone.
    Repositioning a movie in a drop zone is different from selecting which part of a movie shows in a drop zone (which allows you to select which frame of the movie is displayed in a drop zone). For more information, see Related Topics below.

  • Fitting or resizing a photo in a drop zone

    Is there a way to resize a photo in DVDSP. I have a logo that I want on my menu. It was given to me as both a jpg and psd. I tried putting either in the drop zone. Only part of the image appears in the drop zone. When I enlarge the drop zone I can get the entire image to appear, but then it's as wide as the menu screen (I just want it in a corner). I tried importing a smaller version, but that does the same, but pixilated. Is there a way to get the image to fit the size of the drop zone, not the other way around.

    select then click & drag corner handle to size picture
    select then click & drag in picture to move
    shift alt then click & drag in picture to move picture within the drop zone frame

  • Moving Still Graphics in Motion Template: Drop Zones

    I am new to this and it is probably a simple answer. I have a portrait JPG photo to add to a drop zone in a template. How do I adjust the photo only so that it will not cut off the top of the photo. I am using fit in the image properties. It works with stretch but that option distorts the photo and centre makes the photo selection even smaller within the drop zone. The photo is quite large. Do I have to reduce it's size first?
    If I move the photo down with the selection tool it does not allow me to move the photo down without cutting off the rest of the photo outside the drop zone box. All I want to do is move the photo down so it fits within the drop zone so that I can see the bride and groom.

    hi,
    what is the aspect ratio of the drop zone? if it doesnt match your photo then you are going to have to compromise on something. You might lose some picture either at the sides or top and bottom, or maybe you see some blank around the picure.
    As Patrick says its a waste of power having a large picture if you are going to reduce its size and pop it in a frame. Further to this you might want to preflight your image to be the right ratio for your drop zone.
    Hope this helps
    adam

  • Adjusting a still frame in a drop zone

    In previous versions of iDVD, you could move the still image in a drop zone by clicking on it (mainly horizontally -centering an image). In iDVD 08, you can't click on the drop zone and adjust. Checked the help page but no mention. Any suggestions on how to move an image within a drop zone?
    thanks

    Thanks for the two quick responses!! You gotta love the immediate assistance you receive on this site. Either I missed this on the idvd help option or they never posted it.
    Craig

  • IDVD drop zones

    Hello!
    Even though I bought iLife 5 last year when it first came out, I am just now trying to use iMovie/iDVD. I want to use a still I created in iMovie in a drop zone (the tutorial says I can, all I have to do is drag and drop) but each time I do, the drop zone is totally black, like something is there, but there is nothing to be seen. I am also trying to use an audio clip in the same way (for the main menu), but I cannot get it into the audio box in the 'settings' screen. This audio clip is not in iTunes, I recorded it with Audacity and saved it as a wav file and as an AIFF file, but I cannot drag and drop into iDVD or iTunes for that matter. Any suggestions?

    Figured out - you must drop an unedited clip into drop zone.

  • Creating a drop zone in a picture

    Hi everyone. Here is that I'm trying to do. I have a picture of a castle with windows, I would like to add a drop zone in the windows so I can zoom to it then go to another picture or video in another window. I used photoshop to crop out the windows so their transparent but I can't figure out how to put a picture in there and stay there when I zoom to another window. Does this make sense?

    Well I did as you said and it seemed to work a lot better, but I'm pretty anal about this stuff as we should be. It's almost there, the last picture didn't lingo up right and sneaks in from the right. What could I be doing wrong? http://www.youtube.com/watch?v=HYTbmnQ_6js

  • Drop Zones: Video and Alpha Channels

    Is it possible to create a drop zone where the asset is a video clip that contains transparency by way of an alpha channel such that portions of the video allow for the background image to show through?
    I am familiar with setting up drop zones and custom shapes and I have used static images with transparency, but I've never done the same with video.
    I am away from my system right now or I could test this myself. Thanks in advance for the help!

    hi
    depending on how complicated your shot is, you may be able to get away with simply placing the image within the frame on top of the background shot. Then resize down to fit. You may then need to tweak its corners using the corner pin tool to get it to sit in the right perspective plane. You may find you need to soften the edges of the top layer image so its not so sharp and hard. For this you probably would need to add a mask and soften its edges. Then you might need to add some noise and/or colour correction to make it sit naturally with the background image. and finally if there are any shadows cast over the picture frame you will need to add them back over the new image. You can use a black shape, with its opacity cranked down with a blur filter on it.
    The manual describes all of these process pretty well.
    hth
    adam

Maybe you are looking for

  • Issue in List Control

    I am facing a strange issue on the implementation of List Control on webdynpro ABAP UI screen . I have created a List Control where I have some buttons on the toolbar to perform some action. I am providing the data to the list . My issue now is when

  • Some USB 2.0 Hard Disk Drives Work, Some Don't

    External drives that work for me with AEBSn: New LaCie 500GB USB 2 New LaCie 250GB USB 2 Older Western Digital 80GB USB 2 Drive that doesn't work: AcomData 320GB USB 2/FireWire combo The 250GB LaCie drives are currently on sale at CompUSA for $99.99

  • SMCnsnmp in shared-ip non-global zone errors due to duplicate I/F index

    Hi all, I have Solaris 10 zones using the shared-ip model, with Net SMTP installed in the global and non-global zones. Smtpd starts normally in the global zone, but fails to start in the non-global zones, reporting this error ... $ sudo tail /zones/r

  • Revese Outgoing Excise invoice

    Hi all, How to cancel or revese the outgoing excise invoice . Scenario:created delivery document then outgoing excise invoice,but some how user entered 2 outgoing invoices based on one delivery document. how to reverse and cancel the one extra create

  • Duplicate addresses

    Here's a weird one. Virtually all the records in my address book recently disappeared - this is a periodic problem with Address Book. The records return when Sync asks if I want to delete more than a thousand records on .Mac. I select cancel and the