Creating a moving effect?

I am trying to move from a full screen shot to a small screen shot smoothly, but am having trouble making this work. I want to take the full shot and place it inside of a bottle in the next shot and have it look seamless. I want to show it getting smaller, till it is inside the bottle. At the same time I would like the background (the bottle) to be moving too. Does anyone know how I can create this effect? I don't even know what to call it, so I can't research it.
Thanks,
ruez

I'm not sure I understand correctly, but this is how you gradually shrink an image.
-click on the clip
-in the canvas turn on wireframes (this will allow you to move and resize the image in the canvas, but don't do it yet)
-move to the playhead to the part where you want to start shrinking and click on the key frame button just below the canvas
-now move the playhead to the part where the image will be the smallest. use the wireframes to resize and move the image into place. Then click on the keyframe button.
If the first image is supposed to look like it's inside a bottle then, you'll want the bottle clip on a different video track. So, the first (shrinking) image might be on v2 and then bottle background will be on v1.
I hope that helps a bit.

Similar Messages

Abstract moving effects in flash

Hi
I am new to flash.
I am now trying to make a flash intro for my web site.
I have downloaded some free templates for the same and examined them.
Some special effects, means colour abstrract moving effects or explosion like effects are in that 'fla' file.
They appear as movie clips. I can export them as flv also.
How they are created? Is it in flash itself or from some other programs like after effects or something?
I would like to create such effects for myself. If it is not in flash, then there is no point in wasting time figuring out the methods by myself.
Thanks.
Roy

Here are the effects or movie clips I am after. Is it created in flash?
Any info to the right direction.Thanks

Creating a "parallax" effect in Keynote

Is it possible to create a"parallax" effect in Keynote? It is the effect of moving in a synchronized fashion different backgrounds on the same slide at different speeds.
Examples can be found here: <https://ihatetomatoes.net/demos/parallax-scroll-effect/> or <http://speckyboy.com/2012/07/20/the-parallax-scrolling-effect-40-examples-and-tu torials/>

Hi Gary,
Thank you very much for your response. This is helpful. I know that scrolling is not possible with Keynote but I suspect the effect can be simulated in Keynote. I placed several images on the same slide as layers. Then I have played with the "move" animation feature and the timing modifiers and have gotten close on the look and feel of parallax. Any other suggestions are welcome.

How can I create an iridescent effect in a Photoshop 3D object?

How can I create an iridescent effect in a Photoshop 3D object? I have searched everywhere for downloadable option for a mac with no luck. I'm working with CS6.

NO way. Such stuff isn't even commonly available in many 3D programs becaus it's actually pretty advanced shader stuff...
Mylenium

How to create a moving text in APEX forms?

Hi
Can anyone help me with the procedure and the code for creating a moving text in APEX.
Thanks in advance.

marquee was introduced with IE (Internet Explorer) and certain versions of Firefox, Opera, Chrome and Safari web browsers support it.
tell me how do you want the text to work. the easiest way will be to create an HTML region and put the marquee tag code in it
if you fear about the compatibility of marquee with browsers or have a browser version with which marquee does not work then use JQuery
check the following
http://plugins.jquery.com/marquee/
let me know if this answers your query in the current thread
Regards,
Vishal
Oracle APEX 4.2 Reporting | Packt Publishing
Vishal's blog

How do I create this particle effect?

I am pretty new to After Effects and I'm getting to grips with all the particle effects and have managed to create some cool looking animations, but I'm trying to create the particle effect as seen in the image link below. Can anyone tell me how this is done, and what plug-in (if any) would be used to create something like this? I can't get anything I do to look like this. Thanks...
http://img171.imageshack.us/img171/5001/particleskf1.jpg

Create the custom particle in Photoshop or a separate comp. Drag the custom particle into your main comp, turn its visibility off, set Particular's particle setting to "Custom Particle", and choose the new layer as the source.
Create a camera for the comp and turn on "Depth of field". Experiment with the settings until you get the desired effect.
Personally, I'd use two Particular layers for that look, one for the larger particles and another for the smaller ones.

How do i create a spotlight effect in final cut pro x

How do i create a spolight effect in final cut pro x any help would be greatly recieved!!
all i can find is tutorials for how to do the effect in the older version of final cut
Many thanks!

In the Timeline position your Playhead at the starting position.
In the Viewport position the Shape Mask at the starting position.
In the Inspector click the Add Keyframe button.
Press Control-V to open the Animation Editor to see your keyframes.
Move the Playhead and the Shape Mask to a new position.
In the Inspector click the Add Keyframe button.
Continue adding keyframes until you have defined the Shape Mask’s movement.
Regards
Nolan

Creating an infinity effect

I'm trying to create an infinity effect with my background layers and have no idea how to do it. My animation is reasonably simple...a camera tracks into a text layer. I have placed two gradient layers in the background as a floor and a wall. The floor has a rotation of 0 degrees and the wall is minus 90. My problem is that where both layers join there is a dark line and I want it to appear seamless. Does anyone know a way around this?

Everything I tried left a fairly defined horizon line, except for one:
Use the same gradient for the floor as you did for the back, and reverse it's order so that the two edges match at the same color (you can manipulate the floor gradient afterwards to change in the direction of the viewer.)
Easiest thing to do is create the back wall; create the gradient effect. Set the Anchor Point at the bottom edge. Duplicate the wall. Rotate the floor 90 degrees on X. Position in space; scale accordingly.
Go back into the floor shape gradient and change as needed – anything but the edge color that contacts the back.
You can't use a light. So fake one. You can add an oval shape behind the main subject - large feather value - a color blend mode like Add (turn down opacity to taste.) You can use a Reflection on the floor.
The effect will be seemless... but also a lot more work achieving a balance.

How to create the droste effect in photoshop cc 2014?

In the past you could use pixel bender to create the droste effect, that is what I have found out from the internet.
But how to create that effect today seams non existent on the net!
Can any one help?
KR,
AJ

Right. Pixel Bender is gone. It was an experimental filter available from Adobe Labs but never made it into an actual product release. As of CS6, Oil Paint filter was introduced. It's not the same thing but more like a shaved down version of Pixel Bender.
Look at Filter Forge. They offer a 30-day trial. Disclaimer: I've never used it myself.
Droste Spiral (Effect)
Filter Forge - Download Free Photoshop Plugins!
Nancy O.

FW8 Can't Seem To Create Disjoint Rollover Effect

Hello,
I used previous versions of FW to create "disjoint rollover"
effects without any problem. This time I'm using FW8 to create the
same effect but so far it has proved unsuccessful, I have even
tried the step by step instruction of "help" menu with no success.
Can somebody pease help me with how to achieve this effect
with FW8 if it is possible.
Many thanks in advance!

More than half of the trouble posts on the DW forum are the
result of using
a graphics editor to write HTML. It's a grand idea that
utterly fails.
Such HTML is rigid, and fragile. You cannot avoid HTML if you
are going to
be working on the web, no matter what the marketing hype
says.
Harsh? Perhaps. True and well intentioned? Yes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"WollombiWombat" <[email protected]> wrote
in message
news:eo4c1j$kmn$[email protected]..
> Murray: I think you are being a little harsh here for a
newbie. If the
> doco
> says it works then it bloody well should!
>
> Linda: A voice of moderation and consideration as
always. No wonder I like
> your books and contributions at places like PVII and did
I see you at
> Community
> MX ?
>
> Cobbyfred: Can I suggest that you take up Murray's
veiled suggestion and
> attempt to build the disjointed rollover using DW8 ?
>
> Cheers all.
>

Creating a water Effect using AS3

Hi There
I have created a water effect in Adobe Flash using AS2,
however I now wish to create a flash application with the same
effect but using AS3.
Please see the attached code I have used to create the water
effect using AS2.
I am looking for somebody to help me change this to work in
Action Script 3. Any help would be greatly appreciated.
Thanks
Tremayne

You are maybe talking about the cursor tooltips? The
one when you pause over a link a little box pops up
with the link or name of the link? Maybe?
If so, iweb can't do this. It make the default
tooltips the name of the link. You can edit it to
whatever you want by changing the "alt" tag in the
html.
???

Tutorial on creating a Sparkle effect

Hi all,
I'm trying to create a sparkle effect in which i have a small video on top of the main video. The small video has a circular matte so it's in the circular shape, and I want the border to have a sparkle effect.. as if it is a star or something. Can someone point me to the proper effect or a tutorial?
Thanks

There are tens of thousands of tutorials for After Effects, many are rubbish, but you get what you pay for. The problem is finding something that is a precise discrition that you can understand of exactly what you think you want. You can look up sparkle and you will eventually find out that what you really are looking for are particle tutorials. Then you may discover particles are really complex. Really. Isn't there an easier way?
CC Particle Systems II, under Simulations, will create sparkle particles from within a shape.

How do I create a "hover effect" in an Adobe Portfolio layout template?

I am trying to find/create as layout template for Adobe portfolio that can create a hover effect so when the reader hovers over a heading it display a list of pdf documents that are grouped under the heading and the reader can select which one to view.

Changing the functionality of the Portfolio layouts requires you to write an entirely new one using the Acrobat Portfolio SDK and Flex - or hiring someone to do it for you.

How do I create a moving picture with Photoshop?

Hi, I want to create a moving picture using photoshop for my web www.yoshiwafa.com Is it a difficult job for a Beginners Photoshop?

What version of photoshop do you have and what format were you thinking about?

Whfree can i find my channels in elements 11..i am trying to create a text effect

I am trying to create a text effect that requires me to make all channel active. Normally in photoshop i can find the tab near my layers but they are not there.

There is no channels palette in Elements.
You can select channels in the levels command. There is generally a way to do what you want in Elements; can you give more details about what you want to achieve?

Creating a moving effect?

Similar Messages

Maybe you are looking for