Creating a new application in E-BS
Hello,
Not sure, if OAF forum is the right one to ask this question, but as we have been customizing EBS only using OAF, asking it here.
Are there any guidelines in deciding whether to create a new application or not during EBS customization. I mean, even if you add
a new custom table to EBS we generally create a new schema and create it there, similarly how do we decide whether we should
be creating a new application or not for the customizations.
regards, Yora
If you are writing custom code from scratch, it is recommended that it be registered to a custom application. If you are only doing personalizations, then a custom application is not necessary
Integrating Custom Applications with Oracle Applications Release 11i (Doc ID 176852.1)
Step By Step Guide to Creating a Custom Application in Applications 11i (Doc ID 216589.1)
HTH
Srini
Similar Messages
-
Issue while creating a new application in Hypeiron Planning
Hi,
When I am trying to create a new application in Hyperion Planning - the below log is coming...
Planning server started fine in 4328 ms ( as shown in the below log) but once I click the finish button to create the new application its then I am facing with the issue and the same error is repeating in the Planning server..
but I could see the new application in EAS console - but when I cannot see the application in workspace or planning web..
When I restart the planning server - the same error is repeating - but when I delete the application from EAS and then RECONFIGURE Planning(database, instance and datasouce of planning )in shared services and restart the planning server the error is going of (most probably because all the old tables are being dropped in the database)
Please help me resolve the issue.
Planning server Log:
Mar 31, 2008 3:40:24 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8300
Mar 31, 2008 3:40:24 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 766 ms
Mar 31, 2008 3:40:24 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Mar 31, 2008 3:40:24 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
Mar 31, 2008 3:40:25 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Mar 31, 2008 3:40:25 PM org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
Mar 31, 2008 3:40:25 PM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HyperionPlanning from URL file
:G:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
Creating rebind thread to RMI
Mar 31, 2008 3:40:29 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8300
Mar 31, 2008 3:40:29 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8302
Mar 31, 2008 3:40:29 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
Mar 31, 2008 3:40:29 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 4328 ms
[INFO] AuthChallengeProcessor - basic authentication scheme selected
[INFO] AuthChallengeProcessor - basic authentication scheme selected
Setting Arbor path to: G:\Hyperion\common\EssbaseRTC\9.3.1
[INFO] AuthChallengeProcessor - basic authentication scheme selected
[INFO] AuthChallengeProcessor - basic authentication scheme selected
[INFO] AuthChallengeProcessor - basic authentication scheme selected
[INFO] AuthChallengeProcessor - basic authentication scheme selected
Connection to the datasource created successfully.
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00942: table or
view does not exist
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source
at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]O
RA-00942: table or view does not exist
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00942: table or
view does not exist
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source
at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]O
RA-00942: table or view does not exist
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsis
tent datatypes: expected INTERVAL got NUMBER
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source
at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]O
RA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
software details:
EAS server is up and working fine
Hyperion planning 9.3.1
Oracle database 9.2.0.1.0
Regards,
RaviNow we have a new schema in place WITH a new username and password for oldb database-
this is the change in the datasouce configuration (USER NAME CHANGE)
Datasource name: newplan
Select Database: Oracle
Database details:
Sever: my database server ( say 10.301.222.320)
Port:1521
Product: PLANNING
database: oldb
username:HYPPLAN
password:***
when I use the above configuration: below is the error log
Apr 1, 2008 11:39:49 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8300
Apr 1, 2008 11:39:49 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 750 ms
Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HyperionPlanning from URL file
:G:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
Creating rebind thread to RMI
Apr 1, 2008 11:39:53 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8300
Apr 1, 2008 11:39:53 AM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8302
Apr 1, 2008 11:39:53 AM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/16 config=null
Apr 1, 2008 11:39:53 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 4656 ms
[INFO] AuthChallengeProcessor - basic authentication scheme selected
[INFO] AuthChallengeProcessor - basic authentication scheme selected
Setting Arbor path to: G:\Hyperion\common\EssbaseRTC\9.3.1
Connection to the datasource created successfully.
Error log starts here--------------------------------------
in cpp-Created Application:planone 0
Unable to create Analytical application. Exiting Application Creation.
Exception in Application Creation :Unable to create Analytical application. Exit
ing Application Creation.
java.lang.IllegalStateException: Unable to create Analytical application. Exitin
g Application Creation.
at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)
at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication
(Unknown Source)
at HspCreateApp.Handle(Unknown Source)
at HspCreateApp.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
ContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:16
0)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:683)
at java.lang.Thread.run(Unknown Source)
java.lang.RuntimeException: Create application failed.
at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication
(Unknown Source)
at HspCreateApp.Handle(Unknown Source)
at HspCreateApp.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
ContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:16
0)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:683)
at java.lang.Thread.run(Unknown Source)
the error I am getting in appwizard - "error occured while creating application - please check the log"
and if I am using the same schema - i.e. same userid and database for both planning system and planning application I was getting the previous error
Regards,
Ravi -
Error while creating a new application
Hi Gurus
I'm a newbie in FDM. I'm accessing Workbench Client from my local machine(Windows XP). When I choose to create a new application it is giving this error: "-2147220992- Error in EnumProjects"(clsAppMgr.mDisplayNewApp).
Please help me solve this.
Thanks in advance.
Regards.Hello,
As it appears you have multiple issues (Workbench Win32 issues, IIS issues, SharedServices issues, etc.) I would suggest you create an SR to have someone from support help you from a complete perspective. Issues that spread out of more than 'one single issue' are hard to diagnose via the forums and do not offer a speedy response as we can not see anything about your environment.
Keep in mind Support sometimes can not fix your "environment" but only point out what was done wrong during the installation/implementation. It is at that point your priority to work internally to find the resources to address the issues.
Thank you, -
How to create a new application in APEX based on a VIEW
Hi all
I am a newbie to this tool. I am trying to create a new application with the wizard and choosing a repor/form. I want to use a VIEW and not a table to base the applications on but do not see the view in the drop down list to choose it. In the screen itself the definition of a Report and Form page says a user can update a table or view. Yet I do not see a way to choose the view.
Can someone make a suggestion on how to choose a view to base an application?
thank youHello user533722 (please tell us your name - we're a friendly group),
Is your view in a different schema than the one the tables are in? If so, you need to grant permission on the view to the Parsing Schema defined for that application (go into Shared Components > Definition to see what the parsing schema is). Then you should be able to see the view in the dropdown.
Hope this helps,
John -
ORA-20001 Error when creating a new application
Hi,
I am trying to create a new application of an existing table in the database and I get the following error. The application is created using the wizard (app type Database, from scratch, Report and Form page)
ORA-20001: Unable to create modules. ORA-20001: Create pages error. ORA-20001: Unable to create form page. ORA-20001: Error page=2 item="P2_NON_ORACLE_EMPLOYEE_SPEAKER" id="1975288532127294112" ORA-20001: Error page=2 item="P2_NON_ORACLE_EMPLOYEE_SPEAKER" id="1975288532127294112" has same name as existing application-level item. ORA-0000: normal, successful completion
The table I am creating the app on is defined like this:
CREATE TABLE "TABLE_1"
( "ID" NUMBER,
"SESSION_EXTERNAL_PAPER" VARCHAR2(30),
"OWNER_CFP_SUBMITTER1_FULL_NA" VARCHAR2(255),
"OWNER_CFP_SUBMITTER1_COMPANY" VARCHAR2(255),
"STATUS" VARCHAR2(30),
"SESSION_ID" NUMBER,
"TITLE" VARCHAR2(255),
"ABSTRACT" VARCHAR2(4000),
"SESSION_TYPE" VARCHAR2(30),
"SESSION_CATEGORY" VARCHAR2(30),
"STREAM" VARCHAR2(30),
"PRIMARY_TRACK" VARCHAR2(255),
"OPTIONAL_TRACK" VARCHAR2(255),
"CROSS_STREAM_TRACK" VARCHAR2(30),
"SUPPORTING_VIDEO" VARCHAR2(4000),
"ATTENDEE_ROLE" VARCHAR2(255),
"TO_RATING" VARCHAR2(30),
"TO_COMMENTS" VARCHAR2(4000),
"COMMENTS" VARCHAR2(4000),
"ORACLE_PARTNERNETWORK" VARCHAR2(30),
"IS_YOUR_OPN_MEMBERSHIP_UNDER_A" VARCHAR2(255),
"ORACLE_PARTNER_TYPE" VARCHAR2(255),
"OPN_MEMBERSHIP_LEVEL" VARCHAR2(30),
"ORACLE_REGION_BASED" VARCHAR2(30),
"ORACLE_VALIDATED_INTEGRATION" VARCHAR2(30),
"HAS_YOUR_COMPANY_ACHIEVED_SPEC" VARCHAR2(4000),
"PLEASE_DESCRIBE_THE_VALUE_OF_O" VARCHAR2(4000),
"INCLUDE_CASE_STUDY" VARCHAR2(30),
"PROVIDE_NAME_OF_THE_CUSTOMER_F" VARCHAR2(255),
"PLEASE_PROVIDE_A_BRIEF_DESCRIP" VARCHAR2(4000),
"NON_ORACLE_EMPLOYEE_SPEAKER1_F" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER1_C" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER1_FULL" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER1_COMPA" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER2_F" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER2_C" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER2_FULL" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER2_COMPA" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER3_F" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER3_C" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER3_FULL" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER3_COMPA" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER4_F" VARCHAR2(255),
"NON_ORACLE_EMPLOYEE_SPEAKER4_C" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER4_FULL" VARCHAR2(255),
"ORACLE_EMPLOYEE_SPEAKER4_COMPA" VARCHAR2(255),
"CREATED" DATE,
"CREATED_BY" VARCHAR2(50),
"LAST_UPDATE" DATE,
"LAST_UPDATED_BY" VARCHAR2(50),
CONSTRAINT "OOW_PAPER_PK" PRIMARY KEY ("ID") ENABLE
) ;I am using APEX version 4.0.2.00.07
Any idea what could be wrong and what can be done to resolve the problem?
Cheers,
AndyThanks! Never thought of that.
--Andy -
Facing an issue when creating a new Application in Hyperion Planning Sys 9
While creating application for Planning I am getting this error "An error occurred while processing this page. Check the log for details."
And log file says below things
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]OR
tent datatypes: expected INTERVAL got NUMBER
at hyperion.jdbc.base.BaseExceptions.createException(Un
at hyperion.jdbc.base.BaseExceptions.getException(Unkno
at hyperion.jdbc.oracle.OracleImplStatement.execute(Unk
at hyperion.jdbc.base.BaseStatement.commonExecute(Unkno
at hyperion.jdbc.base.BaseStatement.executeUpdateIntern
at hyperion.jdbc.base.BasePreparedStatement.executeUpda
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(U
at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(U
at com.hyperion.planning.event.HspSysExtChangeHandler.a
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.r
Error encountered with Database connection, recreating connecti
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC
RA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
My System/software
Planning 9.3.1
database - Oracle
application server TomCat
Regards,
Ravii think it is a JDBC error.once check ur JDBC.
i recently installed hyperion system 9.3 and created a new application.
my environment is
hyperion system9.3
database: sql server 2000 with SQL Server 2000 Driver for JDBC Service Pack 3
tomcat
if u get it right please let me know. -
Creating a new application profile
Hi Hyperion Gurus,
Need your advice on an issue we are facing now:
In our current application (HFM 11.1.2.2. EPMA), we have created our application profile with only English as the language. We have 3 applications residing on our current profile.
We now have a requirement as to include Japanese as a language. I am aware that I can not make changes to the alias dimension in the existing application. This means that we will have to create a new application profile.
My question is: What will happen to the existing shared library that we use for our current applications? When I create a new application will it impact the old ones?
Any thoughts and ideas are greatly appreciated!
Thanks,
Steffi.Hi Thanos,
so I did create a new application profile and included the languages I needed. And when I created the application, the Alias dimension is blank.
Here are the steps that I followed:
1. Create a new application profile from the desktop client.
2. Opened work space and created New application from Administer > Consolidation Administration.
3. Registered the application to Shared Services.
4. Transformed the classic app to EPMA in order to use the Shared library
Not sure what I am missing. I have attached a screenshot of the dimension library from my new application. -
Unable to create the new application
HI
i am trying to create a new application ,database connections are ok data source is ok .essbase connection is ok.when i described currency period plan 1 and no of years and then click finish i am getting this messege
An error occurred while processing this page. Check the log for details.Hi John ,
Oracle® Hyperion Planning, Fusion Edition Version: 11.1.1.3.0
shared services 11.1.1.3
2003 windows service pack 2
Regards -
Getting error when creating the new application
Hi Sandeep,,
wen iam creating the new application iam getting
An error occurred while processing this page. Check the log for details.
where shud i have check log details..
i have given the following iputs
in select tab:
datasource name :oradsn
calender:
custom:
prefix tp
perids per year 13
application;
test
description:
example
shared service project
unassinged
instance :newinstance
calender
Select the default currency for viewing data in the application.
Default Application Currency
USD $ United States of America dollar
Will your application support multiple currencies?
no
Standard Plan Types Name
Plan Type 1
could you please let me know the solutions for this
thanks and best regards,
Kishore1. As you are taking service, your database is oracle database, you might have created a user/schema .
2. When you are creating FDM application and that too providing details of database , there is a button 'options',which has more options like tablespace..etc.
3. If you have created a schema and it has a specific table space ,then you need to provide these details also.else, while creating a user, if you have selected everything as default, then no need to go to 'options'.
Thankx
Nick -
Help with Creating A New Application Form
Hi, completely new to this and trying to create a new application form for a conference.
I've created the form and set each of the packages delegates can buy and added a select button on the right hand side of each of the 6 packages but I can't seem to get it to the point where only one package can be selected - each has details ie B&B and dinner etc so I want delegates to select the one they want beside it.
Also I've managed to create the link to create the email address to populate to send it back but it isn't attaching the completed form - how do I do this?
All help EXTREMELY welcomed! Thanks
ColinHi,
as I know, you can change your cursors by system software or/and browser. On the other hand you can use programs "outside" of your DW. I suggest to "Google" for them, as I did, and found for example this:
http://www.google.de/#hl=de&xhr=t&q=create+cursor&cp=13&pf=p&sclient=psy&site=&source=hp&a q=0&aqi=g2&aql=&oq=create+cursor&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=e8c6fad3e718b799&biw=1280 &bih=785
or http://www.cursors-4u.com/ and while examining this website my cursor changed immediately.
Hans-Günter -
How to create a new application user by my application?
Hello,
I want to give the user of my application the possibility to create a new application user if necessary. The creation of a new user should be realized in my application. I tried to find the answer in the apex user guide, but I haven't found it. Can somebody tell me how to create a new application user in the implemented application (one page in application for creating users for my application)?
Thanks,
BettinaHello Bettina,
You can do that using the API: www_flow_fnd_user_api.create_fnd_user. If you look at that procedure in SQL Dev (or TOAD or whatever you like), you can see an example and the description of the arguments.
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/ -
DRM : Create a new application
Hi
I am starting with DRM 11.1.2.
I would to create a new application via the DRM console but :
- I cannot see the "Application Administrator Creation" page as mentioned in the documentation when I create the repository
- after creating the new application, I am unable to start the new application.
Thanks in advance for your help
FannyHi
Thanks for your answer but I have finally seen that this option is for 11.1.2.1 version and I am using the 11.1.2.0 version, so the admin password is the one indicated in the documentation.
Fanny -
Known bugs in 7.0 when creating a new application
Hi all
When creating a new application in BPC 7.0, do you know of any bugs or errors that could occur during the process?
We know that e.g. in OS 4.2 you had to check the logic library for the fxtrans file and create a new one, as it did not finish with the creation process properly.
Are there similar problems in 7.0?
Thank you for any hints in advance.
Regards
MelanieHi Melanie,
As already suggested by Sorin, there are no known bugs and it will b difficult to tell also. Usually, when you are creating a new application, there should not be any problems, if you have done it properly. However, if the underlying dimensions have any problems, then there might be issues in the application also. Before creating the application, process all the dimensions. Then create the application and assign the required dimensions and assign appropriate member access profiles. There should not be any problems.
Hope this helps. -
Oracle 10g - Creating a new Application Server using standalone OC4J 10g
I have some issues in creating a new app. server using standalone oc4j 10g 10.1.3 instance. After I created the app. server instance, I tested the connection and it says connection refused. I used the userid as oc4jadmin and the password as welcome. I am getting a message connection refused. For connection, I used the default hostname "localhost" and I didn't mention anything in the URL path.
Thanks Steve..
Here is what I am trying to do.. I want to create a new app server instance (i.e.) stand alone oc4j server, where I can deploy my web service and run a test.
Oracle JDeveloper 10g:
Under Connection Navigator, Application Server --
1) Right click to 'Create New Application Server Connection'
2) Connection type as 'Standalone OC4J 10 g 10.1.3',
3) Username ==> oc4jadmin, Password ==>welcome, checked the Deploy password.
4) Hostname: localhost RMI Port: 23791
URL path: <<blank>>
5) Test Connection ==> getting a error message...
Error while getting remote MBeanServer for url: ormi://localhost:23791/default:
Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
Any input you can provide would be of great help. -
Error in create a new application
Hello,
i want create a new hyperion application (V11.1.1.3), so I Log on to Workspace, and select Navigate > Administer > Application Library > I have this error message :
There was some communication error. Response is : http://ahmedhoumame:19000/awb/modules/com/hyperion/awb/web/appmanager/Adf.do <html><head><title>Hyperion Embedded Java Container/1.0.0 - Rapport d'erreur</title><style><!--H1 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:22px;} H2 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:16px;} H3 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:14px;} BODY {font-family:Tahoma,Arial,sans-serif;color:black;background-color:white;} B {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;} P {font-family:Tahoma,Arial,sans-serif;background:white;color:black;font-size:12px;}A {color : black;}A.name {color : black;}HR {color : #525D76;}--></style> </head><body><h1>Etat HTTP 500 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Rapport d'exception</p><p><b>message</b> <u></u></p><p><b>description</b> <u>Le serveur a rencontré une erreur interne () qui l'a empêché de satisfaire la requête.</u></p><p><b>exception</b> <pre>javax.servlet.ServletException
org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:516)
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:423)
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
com.hyperion.awb.web.util.HttpFilter.doFilter(HttpFilter.java:19)
</pre></p><p><b>cause mère</b> <pre>java.lang.NullPointerException
com.hyperion.awb.web.css.CSSAuthenticate.<init>(CSSAuthenticate.java:57)
com.hyperion.awb.web.css.CSSAuthenticate.getCSSAuthenticate(CSSAuthenticate.java:45)
com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:60)
com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
com.hyperion.awb.web.util.HttpFilter.doFilter(HttpFilter.java:19)
</pre></p><p><b>note</b> <u>La trace complète de la cause mère de cette erreur est disponible dans les fichiers journaux de Hyperion Embedded Java Container/1.0.0.</u></p><HR size="1" noshade="noshade"><h3>Hyperion Embedded Java Container/1.0.0</h3></body></html>OK (O)
how can I do to solve this problem?
thanksYou could have a look at the following article on Oracle Support - "There was some communication error.HTTP Status 500" [ID 887855.1]"
The issue relates to calc manager but it sounds similar to yours.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confu
-
How to print red color in plain paper?
When printed on glossy papers, red color (in photo or text) looks great. When I print on non-photo, plain papers, red color came out brownish. I tried on premium ink jet papers, it does not print red but in brown color. How can I print red color in p
-
How to show combobox in a table cell
Hi, I set combobox in a table cell but it shows when I click the cell. How can I set the combobox and it be visible since the table is showing.
-
GT80 Titan SLI Awarded Editors' Choice by Computer Shopper
The GT80 Titan SLI review is out from Computer Shopper, giving the Titan their Editor's Choice Award! This beast of machine really out-performs the competition and re-defines the standards of a true desktop replacement notebook . Read more: http://ww
-
hello I use goldengate 11.1.1.1.2 on Aix 6.1 server and oracle database 10.2.0.4, the retention of trail files is one day on the target, when the replicat process abended, I see that, at restart, it reprocess all the trail files , this generate a hug