Creating a new client
Hi guru
How create a new client similar to client000.
Points will be rewarded for the responses.
Thanks in advance
Vijay.
Hi,
pl check this
[New client|http://www.sap-img.com/bc049.htm]
[To create new client|http://listserv.sap.com/pipermail/linux.general/2002-April/002281.html]
regards
sadhu kishore
Similar Messages
-
ERP 2005 - create a new client
Hello
I've created a new client (100) via SCC4. After this, I've tried to login at this client with SAP* user and password PASS (i've also tested with the password that i've changed at installation). The message that the system displays is "Name or password is incorrect".
What can I do to login at the system with client 100?
JanHi Michael,
U should check the parameter value of login/no_automatic_user_sapstar = 0 by default the value is 1 so u have to change the parameter value.After that u can able to login into new client by SAP*/pass.
Regards
Subhash -
How to create a new client in SAP?
Hi Experts,
In my SAP system client 800 is already exists.And I want to practice ALE I need another client.So can exactly tell me steps to create new client?You can create a new local client by copying exsisting client through SCCL
Please go through the required client copy documentation if you are on project
and also refer to required SAP OSS Notes
Few relate T.Codes are:
SCC1 Client Copy - Special Selections
SCC3 Client Copy Log
SCC4 Client Administration
SCC5 Delete Client
SCC7 Post-Client Import Methods
SCC8 Client Export
SCC9 Remote Client Copy
SCCL Local Client Copy
Reward Points if uesful. -
How can I create a new client?
Hi,
I'm new in SAP XI and I want to know how I can create a client 100 and how can I assign a client to an user "XISUPER"??
Can you help me please?
Thanks.
Regards
StefanHi
Follow these steps:
1) Create a client going in to the path given in my previous reply.
2)Login into the client with
User: <b>DDIC</b> or <b>SAP*</b>
Password
For default password go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
3)After login using Transaction <b>su0</b>1, create ur <b>XISUPER</b> user and assign all Roles to it.
Regards
Arpit Seth
P.S Even Sudhir is same thing in his last reply -
Create a new Client Copy Profil
Hi,
is there a standard application to add a individual client copy profil to table CCPROF ?
Reason: The client copy via TDMS does not copy the report variants ( note 1159279 ). So I would like to transfer only variants with SCCL or SCC9. The ABAP RSTRANSP creates a transport order with ABAP variants but ignores variants of queries.
Regards
p121848I don't think so.
About the variants read,
https://cw.sdn.sap.com/cw/docs/DOC-44242
Regards
Juan -
I've created a new client (100) via <b>SCC4</b>. After this, I've tried to login at this client with <b>SAP*</b> user and password <b>PASS</b> (i've also tested with the password that i've changed at installation). The message that the system displays is "<u><b>Name or password is incorrect</b></u>". I've been querying the SAP table <b>USR01</b> and the user is not created for this client (only for clients <b>000</b>, <b>001</b> and <b>066</b>). What can I do to login at the system with client <b>100</b>?
Hi Raphael,
Thanks for choosing the SRM forum for this question. But Netweaver or Web Application Platform would be more appropriate for this question. You can also look for SAP Notes in the BC-CTS-CCO area. See if Note 41839 helps.
Kind Regards, Suresh. -
How to create new client in SAP IDES
Hi Experts,
I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
Give me some suggestions on this.
Thanks & Regards,
Ravi.You Need to do something like this .
Logon to the system
start Transaction SM31
Enter 'T000' as the table name
create a new entry with your preferred client number
logg off the system
Start a new gui logging on to the new client with user
'SAP*' and password 'pass'
Start transaction 'SCCL'
Use client 000 as source and your new client as target
give it the 'go'
wait some time
You can also do all these steps through the menu:
Tools
Administration
Administration
Client Administration
Client Copy
Local Copy
Hope this helps...
Abhinab Mishra -
"How to create new client in ABAP sneek Preview "
HI ,
Can anybody tell me how to create new client in ABAP sneek preview , i had create a new client 100 and tried to enter with Cilent 100. User : SAP* , and Password : pass. But i'm unable to log into the sap system.Hello,
perhaps this will help you --> <a href="http://www.sap-img.com/bc049.htm">instructions</a>
And this quote from another thread:
<i>in SAPNW2004sSneakPreviewABAP this procedure only works if the system <b>profile parameter login/no_automatic_user_sapstar is set to 0</b> (and the system restarted after that), otherwise you will have a new client without any user thus useless ;-).</i>
Regards,
Norman -
can anybody tell me to create a new client at present i have 111,222,333 but i need 000 also.
send me the comfiguration stepsHi Kishore,
Try the following transactions which are quite helpful in all aspects of client copy functionalities.
SCC1 Client Copy - Special Selections
SCC3 Client Copy Log
SCC4 Client Administration
SCC5 Delete Client
SCC7 Post-Client Import Methods
SCC8 Client Export
SCC9 Remote Client Copy
SCCL Local Client Copy
Hope it helps.
Rgds,
Aram K. -
Pass word of SAP* in the new client Created
Hi,
I have created a new client called 100.
I am not able to login though the default password for sap* which is <b>PASS</b>
I am not able to login throught the pasword: <b>07061992</b>.
I am also not able to login through the password given during installation.
This is the first time, i am loggin to client 100
Pls helpHi Balaji,
Logon to client 000 and go to RZ10 -> set the parameter login/no_automatic_user_sapstar to 0 -> restart the system -> login to the new client with sap* and password PASS
That should work,
regards
Juan
Please reward with points if helpful -
I have loaded ECC6 in my system.
I want to create new clients.
I created in SCC4 and and tried to log in through the SAP* password PASS.
But failed.
how it is possible please reply.Hi,
Once you have created the new client in SCC4:
- Goto transaction rz10
- From the drop down select the instance profile <SID>_DVEBMSG<NR>_<hostname>
- Select extended maintanence
- Add new parameter login/no_automatic_user_sapstar and set it to 0
- Save the changed profile
- Make sure to activate the new profile
- Restart SAP system
- login to the new client via SAP*/pass
Regards,
Srikishan -
New client create . but unable to logon
Dear All,
After Instalaltion of SAP ECC6.0 , I Create a New Client (053), When I tried to logon to New Client (053) using user Name as : SAP* and password is PASS.
System shows message Name or Password is incorrect (repeat logon)
I create the the Dedaut profile parameter login/no_automatic_user_sapstar 0
but the same message appares,
Please reply me How to logon in New Client.
Regards,
SantoshFoll. is the parametrers of DEFAULT
login/no_automatic_user_sapstar 0
SAPDBHOST ERPDEV
j2ee/dbtype ora
j2ee/dbname T02
j2ee/dbhost ERPDEV
SAPSYSTEMNAME T02
SAPGLOBALHOST ERPDEV
rdisp/bufrefmode sendoff,exeauto
DIR_PUT /usr/sap/T02/put
rdisp/mshost ERPDEV
rdisp/msserv sapmsT02
rdisp/msserv_internal 3900
login/system_client 001
Regards,
Santosh -
Problem Creating New Client in SAP NW2004s ABAP+JAVA LINUX
Hi,
I installed successfully NW2004s dual stack on linux vmware (SUSE10 enterprise server). This stack give me two client by default, 000 and 001. System gives me default user sap* and password: sapn4sadm
I want to implement the process for BW enabling, and I want to create New Client for it. I have been used SCC4 to create a new client by logging on with the Client 000, but the problem start, when I log-on with the new client.
Client: 002
User: sap*
Password: pass
I have tried system default password of sap* , but that also dosen't help.
It doesn't work, I also try RZ10 to change the value of login/no_automatic_user_sapstar = 0, but I don't find any profile , when I click on the profile field, i get the message "Profile not found". I am not figuring out where I am doing wrong.
How can I success to create a new Client in which i could log on with sap* user. Please Help me
All yours help would be highly rewarded.
Obaid.In order to edit profiles In RZ10, you must first import them.
Menu: Utilities --> Import Profiles --> Of Active Servers
After this you can add your parameter.
One alternative is to edit the profile directly with vi, restart the system, do all client copy tasks, remove the parameter with vi, restart the system again and then import the active profiles.
the profiles are located in directory
/usr/sap/<SID>/SYS/profile
and the filename is something like this
<SID>_DVEBMGS<instancenr>_<hostname> -
SAP* and DDIC passwords for new clients in Sol Man 4.0
Hello all,
I just recently finished a Solution Manager 4.0 on Windows 2003 server box. Then, I performed some of the post installation steps until I had to create a new client. So, I went to scc4 and created a new client. When trying to get access to this new client through SAP*, the default password did not work and the entries were not created in the table usr02. Also, I tried to insert the missing entries into the usr02 table, but had no success after all.
I hope some of you can help on this, because I am stucked on it.
Regards,
Luis Alberto ZeróHi guys ..
i thing you can check in Document Installation guide Solution manager on Page <b>108</b>
If you install a new ABAP or ABAP+Java system, in most cases you do not need to perform the client copy for
the ABAP stack. SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
You can use client 001 for production.
The following procedure describes how to perform a client copy manually. We recommend that you
use client 001 as source client.
<b>Caution</b>
If you want to use a client other than the default of 001 as your production client, you have to reconnect
the Java part to the production client as described in <b>SAP Note 937323</b>.
<b>Procedure</b>
1. Maintain the new client with transaction SCC4.
2. Activate kernel user SAP*:
a) Set the profile parameter
Login/no_automatic_user_sapstar to 0.
b) Restart the application server.
3. Log on to the new client with kernel user SAP* and password PASS.
4. Copy the client with transaction SCCL and profile SAP_CUST.
5. Check the log files with transaction SCC3.
6. Deactivate kernel user SAP*:
a) Reset login/no_automatic_user_sapstar to 1.
<b>Caution</b>
You create SAP system user SAP* on the new client
before resetting
<b>login/no_automatic_user_sapstar.</b>
b) Restart the application server.
rgds
echo -
Hello experts,
I want to copy all users and assigned roles from Quality to the production system.
But as a safety measure I want to copy the existing users and role assignment from production system too one of the test system.
For this I created a new client in test system. My question is:
1) Do I've to create a logical system for this new client?
2) Is there any other step that I need to take beside creating RFC connection?
Thanks in advanceHi,
>
> 1) Do I've to create a logical system for this new client?
Yes.
> 2) Is there any other step that I need to take beside creating RFC connection?
>
I think this is sufficient. Check this [link|http://help.sap.com/saphelp_sm40/helpdata/EN/4e/2d5dfaedbf11d3b7f60000e8160175/content.htm]
Thanks
Sunny
Maybe you are looking for
-
Greetings, My iPhone 3G has been behaving erratically since the update offered last month. In short, the phone freezes for 15-20 seconds regardless of the operation, and does this fairly often during the day. During this time, the screen is frozen &
-
How to change DTMF RFC2833 payload type to 101 or 127
Hi, We are using Flash Media Gateway 4.5, and we would like to change the DTMF payload type from 127 to 101 for RFC2833. as of now, I couldn't find any configuration settings from the documents. Looks like this is a discontinued product but any help
-
hi to all this is reddy i am preparing a questionaire of a project, and it is releated to few scenarois, we have no information about the exact business of the firm, and i am preparing a document releated to the business scenarios like OTC,MTO, Sales
-
[nQSError: 46104] The current operation was about to overflow the stack.
Hi BI, I have some reports that return the following error: [nQSError: 43113] Message returned from OBIS. [nQSError: 46104] The current operation was about to overflow the stack. Please simplify or discontinue from the current operation. (HY000) Does
-
Can you add metatags and keywords to a Muse site to help with search engine optimizaion?