Creating a new country key in bnka

how to create a new country key in bnka.

Hi,
T-code XK02 u can create the Bank data for vendor. If u created thsoe details Stored in BNKA table.
Rewad if useful...
Thanks,
Durai.V

Similar Messages

  • How to create a new Country-Key and Region

    Dear Sir,
    We are creating a new Customer Master record using Tcode XD01 , the customer belong to a Country "MOZAMBIQUE" . This country doest not exist , so we have to create a new Country , Country-Key and Region for this .
    Pl guide us , as what steps are required to be followed for this .
    We assure to award full points for the suggested solution pl
    Rgds
    B Mittal

    Hello,
    You can define new country code at general settings in SPRO.
    SPRO --> IMG -> General Settings -> Set Countries -> Define Countries . Transaction code OY01.
    Prase

  • How to ceate a new Country key,currency ,version and value type for report

    hi,
    can you please let me know How to ceate a new Country key,currency ,version and value type for report
    along with tables and tcodes.
    thanking you

    Not clear on your comments
    How to ceate a new Country key,currency,
       version and value type for report
    because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
    Can you let us know you want to develop a report and if so, from which transactions, you want to take datas.  You have to be clear on this.
    thanks
    G. Lakshmipathi

  • How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    Hey -
    I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
    My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
    He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

  • Need create a new control key, which message control is "error mode", then PR or PO

    Hi All,
    Can please help me I got an issue in QM ,
    Issue Description :-  Current QM control key for supplier validation date is “0001”, the message mode is only warning. PR or PO still can be created forcibly. Need create a new control key, which message control is “error mode”, then PR or PO cannot be created successfully.
    I thing should add some additional logic using BADI or USER-EXIT.
    can please help me how to find BADI or USER-EXIT if you know the appropriate BADI please let me know.
    Regards,
    Nani

    Hi,
    I tried that way I entered message control as Defect even purchase requisition is created how can I restricted purchase request ion.
    Regards,
    Nani.   

  • How can I remove one device without having to create a new sync key?

    I had to hand in a laptop at work but forgot to de-register the device. Is there anyway I can remove this one device from my sync account without having to create a new sync key and add all of my machines back?

    That changes the password but it keeps the same sync'd machines active. That laptop probably has not been turned on in weeks but it still shows up on Firefox Home even though I changed the password on the machines that I still have (the old laptop still has the old password but it still shows up as do the machines that I have not changed the password on yet.) I'm not trying to prevent that machine that I no longer have to sync with my data - I erased it - I just want it to be removed from Firefox Home on my iPhone.

  • New tax displayed when plant created in new country (Customer / Material)

    Hi Gurus,
    We create a plant in a new country.
    Impacts are:
    - New tax classification MWST to fullfil in Material master data (Sales org.1 view)
    - New tax classification MWST to fullfil in Customer master data (Sales org. view)
    So, this new tax MWST displays because a new departure country is available in SAP Organizational structure.
    Tax data is a mandatory field on Material Master Data and Customer Master Data. Try to go in MM02 and you need to complete it to save Material or Customer.
    I would like to update in mass tax for Material and Customer.
    I try to use MASS or XD99 or MM17 but it is not working. Tables impacted (MLAN for Material and KNVI for Customer) don't include the new country. I suppose this is a SAP control when we use MM02 or XD02.
    In my mind, it will be very complex to use LSMW (plenty of Customers and Materials, need to manage right Sales area so retreatment before...). Are there tips to fix it? Have you already reach this problem?
    Many thanks.
    Stéphane

    Hi Stéphane,
       I faced same problem:
          Using MM17 to insert new records it's not what i wanted to do.
    so i follow these steps.
    1-   I used SHDB to save a new recording with MM01.
    2-  Download the recording and edited with Word.
    3-  merge data file with this word and save it as a text file.
    4- upload text file recording to SHDB.
    5- processed it.
    It worked fine and you get a log of operations to control that works fine.
    Best regards
    Juan.

  • Option to create new sync key is missing

    I followed the instructions here:
    https://support.mozilla.com/en-US/kb/Firefox%20Sync%20is%20not%20working#w_ive-lost-my-sync-key-what-can-i-do
    But in my 'sign-in' dialog it says 'wrong sync key' but does not provide a link that says 'I have lost my sync key'. Therefore I cannot create a new key and I cannot use this feature at all. I do not want to have to create a new sync account using a different email, as I do not have a different email that I wish to use for purposes such as this. Please help. I'm using FF 5.0 on a MacBook Pro.

    Hi!
    Unfortunately there's no option to recover your key so you could access your previous data. If you create a new Sync Key you will lost your previously synced data.
    The path to get the key has changed a little bit and the article you are pointing is not totally updated. I'm going to review it with the right steps:
    1- On the menu bar, click on the Firefox menu and select Preferences...
    2- Click on the Sync tab.
    3- Click Set up Firefox Sync and a new window will open.
    4- Under I already have a Firefox Sync account, click Connect
    5- Click I don't have the device with me
    6- Enter your account email address and password
    7- Click on "I've lost my other device"
    8- A new Sync Key will be made for you. Please take a moment to print it out or save it on your computer. Then click Change Sync Key

  • BO( WEBI,QAAWS ) can't sustain bw query : create new calculate Key Figure ?

    BO( WEBI,QAAWS ) can't sustain bw query : create new calculate Key Figure ?
    I create three new calculate  Key Figure : TotalQty1,Rate1,TotalRate1  on bw query. Return values:
    TSAS defect1     Qty     TotalQty1     Rate1     TotalRate1
    weight inaccuracy     33.000     33.000     37.500 %     37.500 %
    poor function     10.000     43.000     11.364 %     48.864 %
    gap out of spec     9.000     52.000     10.227 %     59.091 %
    scratch  /crack/ dam     8.000     60.000     9.091 %     68.182 %
    broken glass/mat     5.000     65.000     5.682 %     73.864 %
    missing display     6.000     71.000     6.818 %     80.682 %
    assembly defect     4.000     75.000     4.545 %     85.227 %
    plastic deformed     4.000     79.000     4.545 %     89.773 %
    no function     4.000     83.000     4.545 %     94.318 %
    poor  printing     5.000     88.000     5.682 %     100.000 %
    But Create on universe  connect  to this bw query, I used QAAWS and WEBI to runat , TotalQty1,Rate1,TotalRate1   key figure values are Qty value, that is error:
    TSAS defect1     Qty     TotalQty1     Rate1     TotalRate1
    weight inaccuracy     33     33     33     33
    poor function     10     10     10     10
    gap out of spec     9     9     9     9
    scratch  /crack/ dam     8     8     8     8
    broken glass/mat     5     5     5     5
    missing display     6     6     6     6
    assembly defect     4     4     4     4
    plastic deformed     4     4     4     4
    no function     4     4     4     4
    poor  printing     5     5     5     5
    pho:
    BW QUERY: [http://space.itpub.net/attachments/2010/04/10339719_201004211645561.thumb.jpg|http://space.itpub.net/attachments/2010/04/10339719_201004211645561.thumb.jpg]
    WEBI:[http://space.itpub.net/attachments/2010/04/10339719_201004211637351.thumb.jpg|http://space.itpub.net/attachments/2010/04/10339719_201004211637351.thumb.jpg]
    QAAWS:[http://space.itpub.net/attachments/2010/04/10339719_201004211637591.thumb.jpg|http://space.itpub.net/attachments/2010/04/10339719_201004211637591.thumb.jpg]
    Why? BO can't sustain bw query : create new calculate Key Figure ?
    Who to figure out this question?
    Because I can't to do create new calculate Key Figure   in webi or Xcelsius ,So ,I create new calulate Key Figure  on BW QUERY.
    Thank you.
    BestRegards,
    Howard.
    Edited by: flying on Apr 21, 2010 10:48 AM

    HI Ingo,
        Didier Mazoue  say universe accept bw query Restricted KF and calculated KF :
       [ Restricted and calculation keyfigures| Restricted and calculation keyfigures]
       Why I create new Restricted KF and calculated KF for bw query, QAAWS,WEBI are can't return ok datas for new Restricted KF and calculated KF ?
      I create KF on Universe :
        select ued : <EXPRESSION>@Select (Key Figures\Qty)</EXPRESSION>   OR <EXPRESSION>SUM(@Select (Key Figures\Qty))</EXPRESSION>  
    parse error: Parse failed:Invalid definition(UNV0023)
       Thank you.
    Regards,
    Howard.
    Edited by: flying on Apr 23, 2010 6:00 AM

  • Creating New Sub-Key (Registry)

    Hello,
    I'm sure someone will be able to answer this quickly.
    I am having a issue creating a new sub-key for a new key that I am creating.
    Example:
    Push-Location
    Set-Location HKLM:
    New-Item -Path .\Test -Name "Testing"
    That works.....but after that key is created I am trying to create another key or sub-key underneath that, I tried using New-Item again because it is a new item but that is not working.
    I know I missing something simple just don't know what.

    Hi,
    What does 'that is not working' mean?
    Check your path, unless you already somehow have a Test key under HKLM your posted command won't actually do anything in the first place.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • I lost my sync key when my harddrive was wiped, so how do I get a new sync key without deleting my saved data?

    I synced my firefox bookmarks so that I could reupload them if ever my computer got wiped, so I don't have a second device with the sync key on it. I made the mistake of only saving the sync key on the computer. I just got my computer back from the shop and they wiped my operating system without asking. Now I don't have my sync key and the only way to access my sync account requires that I change the sync key and delete all the data saved on the server. How can I get access to my data?

    Sorry, without your Sync Key your data is worthless, it can't be de-crypted, and creating a new Sync Key will wipe it from the Sync server.
    BTW, the Firefox Sync service isn't meant for "backups", it is meant to synchronize your Firefox data between different "devices". Any chance you had more than one device setup with that Sync account? If so, you can use the Sync Key from that device.

  • Report Painter - new Basic Key Figure for Currency Translation

    Hi,
    I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
    In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
    The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
    Did anybody encounter an equal problem?
    Many thanks and regards
    Markus

    have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

  • How to build new basic key figures in library 4FM for different local curre

    Hi Experts.  I am working my reports with library 4FM.  I need to create a new basic key figures in order to create a new report with severals currencies, like group currency or  transaction currency.
    Does anyone know how to do that ?
    regards,
    Ruth

    Yes I did.  they told me:   "availability control only works with local currency. Transactional currencies are not supported in availability control (neither BCS nor Former Budgeting).    The developer confirmed the information above. At this moment that thereare no plans to support transactional (non-local or non-FM area) currencies in BCS in a future release. I am really sorry, but I cannot provide you with a more positive answer,anyway, I propose you to refer to note 11.    11 Requested function is not in standard system.    Note 11 will guide you to request the suggested changes, this is the correct channel and the chance to provide the requested functionality asstandard.  Thank you very much for your understanding!  "
    I wrote them back and I said "we don´t need availability control in another currency, we only need that SAP add a key figures in FMAVCT table in order to have FM reports with different currencies"
    Should I say another thing?
    We are waiting for good news.  will see.
    Thanks a lot for you cooperation.

  • New Restringed key figure

    Hi experts!
    We would like to ask if it is possible to create a new calculated key figure within an BEX report in this way.
    If the key figure is between a range of two key figures calculated, we would like to make it have a value in letters.
    For example, we have the KF 1 with value and the KF 2.
         We would like to have two new key figures having into account KF1.
              If the difference of Key figure is +/- 1, we would like to see a value (ideally in text)
              If the difference of that key figure is supeior to 1, we would like to see other value (ideally in text)
         The the idea is: ¡
              KF3 =>If the value of KF1 is between +2 / -2 over KF2 ==> Value "OK"
                        KF 1 = 10
                        KF 2 = 10,5
                        Range (-1,+1)
                        As result => KF3 with value " OK"
              KF4 => If the value of KF1 is superior +2 / -2 over KF2 ==> Value " NO OK"
                   For example:
                        KF 1 = 10
                        KF 2 = 14
                        Range (-1,+1)
                        As result => KF4 with value "NO OK"
    In case that text is not possible, do you see any other alternative?
    Thank you very much in advance for your help!!

    Hi DieGasse,
    create two restricted KF with the above logic which you have mentioned.
    and then follow the below procedure
    1) click on the exception button in the tool bar
    2) you will get separate tab 'exceptions' .
    Rclick on the area, and click 'create exception'.
    3)Rclick edit --> New
    4)select Good(green)/average(yellow)/bad(red) and the values.
    5)in the definition tab of your exceptions, select your keyfigures
    6)save and activate the same
    let me know if you need more help in this.
    BR
    adlin

  • New transaction key with the posting key 24 and 34

    Hi,
    i want to create a new transaction key with the posting key 24 and 34.
    the corresponding table is T030B.
    but what is the Tcode/ IMG path to create it?
    Regards,
    Swetha

    Hi,
    Go to FBKP. Click on  Automatic Postings.
    Suppose you want to see the Exchange Rate diff. then click on it. You will see the transaction. Suppose KDB. Then double click on it. Now click on posting keys. The same will be defined in the table which is given by you.
    Regards,
    Jigar

Maybe you are looking for