Creating a new document with different formats, i.e. A5
Hi there,
I want to create a nwe document in A5 with about 10 pages, how to do that?
thanks a lot
gustavo
Hello
I guess that triggering the menu item :
File > Page Setup…
may help.
It's from this one that we may define the paper format.
Yvan KOENIG (VALLAURIS, France) dimanche 22 mai 2011 12:37:12
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
Similar Messages
-
Please help me creating a new listener with different port#.
I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done. -
Create a new document with settings appropriate for SWF or XFL output.
I'm studying up for the CS4 ACE exam, and I'm stumped on something. In the "Laying out a Document" section, it says: "Create a new document with settings appropriate for SWF or XFL output." There isn't really anything specific to creating a document for flash, except that you wouldn't add bleed. I can't find anything online that addresses this. Am I missing something here? Any document can be exported to SWF or XFL. This seems rather ambiguous. What is there to know about this?
You're right that any document can be exported to SWF or XFL. I'm not sure what you're going to be asked on the ACE exam, but here are some resources:
Help topic:
http://help.adobe.com/en_US/InDesign/6.0/WS2DECDF40-B6DA-40b6-804F-2703D6C6A460.html
Tim Cole's first of 3-part series:
http://blogs.adobe.com/indesignchannel/2008/11/indesign_2_flash_part_i_1.html
My blog entry:
http://blogs.adobe.com/indesigndocs/2009/03/exporting_interactive_indesign.html -
Ilustrator freezes creating a new document with web profile.
Hi,
I have the illustrator instalation from creative cloud subscription and everytime i create a new document and on the profile combo choose "web", the illustrator freezes forever.
Im using mac version in a macbook pro 13" corei7 with 8gigs ram.I'm having the same issue with i7 2500k, SSD, 16gb ram, 6870 2gb vram 10.7.4.
Anyone have any idea if i can get a crash report to help you guys out with figuring this?
Basically whenever i go -> new and change the document profile to web (or a few others) it just LOCKS and needs to be force quitted.
I've also just ran with the default and it locks up anyway. -
Creating a new document with columns and printing effects
If you create a new document and set columns into it in the new document menu, and then subsequently create images, tables, text etc. in the document that are bigger than one column (that stretch for example across the entire page), will the part of the image that's in the gutter print and/or show up if it's saved as a PDF?
Help!
Thanks!Guides are only there as a reference for you to help in alignment.They don't restrict what or where objects can be placed or affect their visibility or printability.
To see what your page will look like in print, switch to Preview Mode (fast way is to press W with nothing selected). -
Creating a new document with separate images
Can someone help me create a new document that has two separate images. I can create a new document but don't know how to place two separate photos in the document. For instance create a document that is 8.5 x11 with two images each 8.5 x 5.5.
there is a number of ways to do this. also reading the manual to get a basic understanding of how Photoshop works will do wonders. Another method of learning is lynda.com
here is one way.
1 make a doc that is 8.5 x 11 at whatever resolution you need.
2 use a guide as a center point.
3 open the two pics you want to use.
4 make sure they are the same res as your 8.5 x 11
5 drag the layers from the open pics to the 8.5 x 11
6 crop and size the pics in the file so they fit in each half -
How to create a new document with a given theme, instead of choosing it every time.
Hi,
for work I only use a custom made keynote theme.
I've already deleted all the default themes, and the only one that is listed in the app is the one I actually use.
However every time I create a new document I have to chose its theme (that's normal having plenty of themes, but in my case is just a waste of time).
I was wondering if there's a way to tell keynote to start a new document with a given theme, in order to avoid to chose it every time.
Thank you for reading and for the help you will give.
GiacomoKeynote > Preferences > General tab
select “Use theme,” and then click Choose to select a theme. -
Can I create a new document with a locked PDF file, add new pages, and lock it all again?
I published a PDF document ten years ago and now want to add Creative Commons licensing language to the copyright page. But I forgot the password! I gather from the Forum that there is no way to recover the password. However, I wonder if I can take the locked PDF file, create a new document (adding a new page for the licensing information), then lock the whole thing up again. Will this work? Thanks for your help!
To create an unprotected file you would need the password.
-
I am trying to use the Employee Template to create a schedule, and have everything set up the way I want and have my first week of schedule written. Now I am having trouble duplicating the 2 sheets (that come with the Template) to begin the next week, but the links in the formulas all link back to the original administration sheet. Can I set it to link to the new sheet that was duplicated? Does this make any sense?
This is problem seems funny because it shows poor planning on the designer of this template (in my opinion). I would make the following changes
1) cut the table "Administration Information" from the Sheet "Schedule" and paste in a new Sheet titled "Admin"
2) Rename the table "Week of ..." in the sheet "Schedule" to "Plan"
3) add a new 1 row, 2 column table for entering the date for the start of this week (call the table "Date")
4) Rename the table "Week of..." in the sheet "Printable Schedule" to "Print"
5) Rename the sheet "Schedule" to "2012 Week 26" or what ever name you want
6) copy the table "Print" to the sheet "2012 Week 26"
7) enable print view by selecting the menu item "View > Show Print View"
8) move the table "Print" to the second page of the sheet
9) delete the sheet "Printable Schedule"
This is how things should look. Ignore the highlighting around cells in the image below (I'll refer back to this later):
Now you can duplicate the sheet "2012 Week 26", update the date in the date table, update the schedule, then print from page 2 to 2.
I hope this helps -
JS - Center Selection to Artboard / New Document with certain Artboard size
TL;DR:
how do I center my current selection to the artboard?
just like hitting the "horizontal align-center" and "vertical align-center" buttons.
Hi,
I've been searching for the last two hours and before my head hits the keyboard I wanted to ask you for help.
What I'm struggling with:
in my init function i create a new document and then copy all layers from the previous document step by step to the new document and then save it as SVG.
// Init
(function(){
destination = Folder.selectDialog('Select folder for SVG files.', docPath);
if (!destination){return;}
holderDoc = app.documents.add();
stepThroughAndExportLayers(docRef.layers);
my problem is that holderDoc = app.documents.add(); always creates a document that is not the same size as my initial document where the layers get copied from.
so I want the exact same artboard size as in my initial document.
I'm fine with either doing it as fixed values or taking directly the values of the inital doc.
i tried this in the segment where I create the new document:
// Init
(function(){
destination = Folder.selectDialog('Select folder for SVG files.', docPath);
if (!destination){return;}
holderDoc = app.documents.add();
holderDoc.artboards[0].artboardRect = [0,0,128,128];
stepThroughAndExportLayers(docRef.layers);
and get this error message:
"Error 1200: an Illustrator error occured: 1346458189 ('PARM')
Line: 83
-> holderDoc.artboards[0].artboardRect = [0,0,128,128];"
which from what I've read on the web means that illustrator doesnt know what document to pick. but i have called it directly. so what could be the issue?
to clearify: I do not want to fit the artboard to the images/layer. the artboard should always have a certain size. (for me 128px by 128px)
I would highly appreciate you helping me with either fixing my approach or propose a completely new one.
Thanks so much in advance.
// edit: workaround
(function(){
destination = Folder.selectDialog('Select folder for SVG files.', docPath);
if (!destination){return;}
var activeArtboard = app.activeDocument.artboards[app.activeDocument.artboards.getActiveArtboardIndex()];
var ABRect = activeArtboard.artboardRect;
holderDoc = app.documents.add();
holderDoc.artboards.add(ABRect);
holderDoc.artboards.remove(0);
holderDoc.artboards.setActiveArtboardIndex(0);
//stepThroughAndExportLayers(docRef.layers);
i now added a new artboard to the new document with the same size as the artboard on the initial document.
i remove the predefined artboard on the new doc and set the new artboard as active.
BUT!
the artboard is now not centered into the window. which lets illustrator place my image with ctrl+c -> ctrl+v somewhere outside the artboard.
i now need to align my selection to the center of the artboard. but i cant find any reference on how to center a selection to the artboard.yes of course. i never modify the author's comments in original scripts.
but I wont post the script anywhere when it doesnt work anyway haha.
this is what I've done now:
// Init
(function(){
destination = Folder.selectDialog('Select folder for SVG files.', docPath);
if (!destination){return;}
var activeArtboard = app.activeDocument.artboards[app.activeDocument.artboards.getActiveArtboardIndex()];
var ABRect = activeArtboard.artboardRect;
// create new document with same artboard as original
holderDoc = app.documents.add(DocumentColorSpace.RGB, new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"), new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"));
stepThroughAndExportLayers(docRef.layers);
in order to create the new document with the same dimensions as my orignal doc, I first read the artboardRect dimensions of the current artboard and then create the document with those values passed as parameters. the calculation is to get the real width since artboardRect gives you left,top,right,bottom values and not just height and width.
this only works for square formats though. to make it properly you'd have to change the second "new UnitValue" to use the top and bottom values of artboardRect but I currently dont need to do so.
* Layers to SVG - layers_export.jsx
* @version 0.1
* Improved PageItem selection, which fixed centering
* @author Anton Ball
* Exports all layers to SVG Files
* I didn't want every layer in the SVG file so it first creates a new document
* and one by one copies each layer to that new document while exporting it out
* as an SVG.
* TODO:
* 1. More of an interface wouldn't hurt. Prefix option and progress bar of some description.
// Variables
var docRef = app.activeDocument,
docPath = docRef.path,
ignoreHidden = true,
svgExportOptions = (function(){
var options = new ExportOptionsSVG();
options.fontSubsetting = SVGFontSubsetting.GLYPHSUSED;
options.embedRasterImages = true;
options.fontType = SVGFontType.OUTLINEFONT;
return options;
destination, holderDoc;
// Functions
var stepThroughAndExportLayers = function(layers){
var layer,
numLayers = layers.length;
for (var i = 0; i < numLayers; i += 1){
layer = layers[i];
if (ignoreHidden && !layer.visible){continue;}
copyLayerTo(layer, holderDoc);
// Resize the artboard to the object
selectAll(holderDoc);
exportAsSVG(validateLayerName(layer.name, '-'), holderDoc);
// Remove everything
holderDoc.activeLayer.pageItems.removeAll();
holderDoc.close(SaveOptions.DONOTSAVECHANGES);
// Copies the layer to the doc
copyLayerTo = function(layer, doc){
var pageItem,
numPageItems = layer.pageItems.length;
for (var i = 0; i < numPageItems; i++){
pageItem = layer.pageItems[i];
pageItem.duplicate(holderDoc.activeLayer, ElementPlacement.PLACEATEND);
// Selects all PageItems in the doc
selectAll = function(doc){
var pageItems = doc.pageItems,
numPageItems = doc.pageItems.length;
for (var i = 0; i < numPageItems; i += 1){
pageItems[i].selected = true;
// Exports the doc to the destination saving it as name
exportAsSVG = function(name, doc){
var file = new File(destination + '/' + name + '.svg');
holderDoc.exportFile(file, ExportType.SVG, svgExportOptions);
// Makes sure the name is lowercase and no spaces
validateLayerName = function(value, separator){
separator = separator || '_';
//return value.toLowerCase().replace(/\s/, separator);
return value.replace(/\s/, separator);
// Init
(function(){
destination = Folder.selectDialog('Select folder for SVG files.', docPath);
if (!destination){return;}
var activeArtboard = app.activeDocument.artboards[app.activeDocument.artboards.getActiveArtboardIndex()];
var ABRect = activeArtboard.artboardRect;
// create new document with same artboard as original
holderDoc = app.documents.add(DocumentColorSpace.RGB, new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"), new UnitValue ((Math.abs(ABRect[0]-ABRect[2])), "px"));
stepThroughAndExportLayers(docRef.layers); -
My Check Out and Open is creating a new document!
Hi there,
As the subject say, my Check Out and Open is creating a new document with a new ID instead of making a new revision of the document.
It creates a new document starting the revision with the number 2! And if I make Check Out and Open of this, it creates a new document with the revision starting on 3.
I can´t get a list of revisions of a document... it creates allways a new one...
Can you explain me why? I really need to fix this.
Thank you,Hi
Yes the behavior is normal and thats because COAO is doing 2 steps in one viz checking out a content and also opening it for Editing. So effectively you are combining these 2 actions into one. So the content is checked out and hence shows up in the My checked out content.
As for the DIS and COAO , I have not seen a way other than this of working , dont really know why this is the case but I haven't found out a way for making it work in a normal way. Once DIS (WEI) is uninstalled the COAO works normally as in a new revision for that content is checked in .
Hope this helps
Thanks
Srinath -
Creating a new document in Finder with right-click--How?
Is there a way to create a new document in a Finder folder by right-clicking (or Ctrl-left)? So that the new file will be created at that very spot, in that very folder.
In Windows-Explorer this was quick and easy. Just right-click and you could choose from a menu to create a new empty doc of the most popular (installed) programs. Text file was mandatory. The file was created where the curser was at. VERY handy as that way you didn't have to open the application, create a new doc and then when saving having to crawl your way all the way to the position in the Explorer/ Finder.
Since I started with Apple and Tiger I've been missing this feature and Snow Leopard still does not seem to have it. Or did I miss something? I checked all the menue as well. There's not even a "Create new document". Only a "Create new folder".
I was just reminded of this when I wanted to create a new file on an external drive on a server to save some text in it. There was no way other than first opening Textedit, saving the empty file on the local Mac, THEN transferring the empty file to the server. Only THEN I could open it and edit it.
There MUST be a quicker way.
Also, in Windows you could edit this list in the menu (and add programs that would not by themselves do this). Is there a way for the Mac?
Cheers,
JayI might have just found a solution myself:
https://discussions.apple.com/message/10432377?messageID=10432377&%3b#1043237 7
It seems other people are wondering too.
And for those of you who don't understand why this is useful: Try it.
Open Textedit, Apple-N, and then save the darned file somewhere deep in the labyrinth of the Finder where you've just been but withouth the file. It takes AGES.
I, on the other hand -- at least in Windows --, right-click, new, double-click AAAND I'm on editing the file.
VERY quick.
It's beyond me why this is not possible on a Mac. -
I have 2 apple id's with different apps and data saved under each. It's very annoying so now I want to create a new id with my primary email address I use now. If I do that is there any way to transfer all my saved apps and app data like game saves etc so I don't lose all of that information and can easily switch to a singular apple id?
Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621 -
After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.
Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV). -
How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.
For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.
Maybe you are looking for
-
QuickTime Error: Operation could not be completed. (OSStatus error -2125.)
Hello there, I have recovered data from a bad disk and would like to save it as a movie with QuickTime. But it is always giving me this error message at the end, almost before it finishes saving the file: The movie "Caribou_migration4" could not be s
-
" this copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes"
Does anyone know how to fix without losing all my music
-
How can I fill in the blanks on a lease?
I found the file, now I'm trying to use the "Tool" to fill in the blanks, and it won't allow me to.
-
How to call Oracle Form within Oracle Form?
Hi, I have a requirement to call a customized Oracle Form from standard Oracle Form (Special Information screen) and vice versa. Then need to display the person detail accordingly. Is it possible to be done? Appreciate guidance on this item. Thanks a
-
CS4: Exporting "lightweight" AVI with chapter marks?
Prior to CS4, I recall being able to export a "lightweight" AVI file using black video filler and the "Expand Stills" option that would contain chapter marks. You could import this AVI into Encore, where the chapter marks would be recognized, and the