Creating a new logging table in source

Hi ,
I have two relication setup , one is ECC to Ent hana and the other Ecc to BW on hana.
For ECC to BW on hana , i want to create a seperate logging table in source to diffrenciate from the two replication.
Could you please let me know how to do this.
Thanks,
Rajiv

Hi,
this is unfortunately the wrong community, pls. have a look here: SAP LT Replication Server
There you can post your question.
Best,
Heike

Similar Messages

Creating A new Pricing table

hi everyone
i need to create a new price table for ZS83 based on
PM_COLOUR. This new table needs to allow me to set
different special
colour pricing for Coca Cola Canada customer for the
different sizes this customer purchases: 813 (TBA), 466 (TBA), 465
(TWA)
waiting for the reply
thank you
praveen
praveen

Praveen,
I don't think this is the right forum where you can get an answer on the pricing procdures.
This forum is for ESA.
Regards
Ravi

Access key needed when creating a new database table with SE11

Hi,
I'm using SAP Testdrive (evaluation) on linux in order to learn a bit about ABAP programming. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1) I run the SE11 transaction
2) At the first entry I write the name of the table to be created (in the Database Table field)
3) I click on the create button.
But then the system asks me an Access Key to register, where can I get this?
Thanks in advance,
Kind Regards,
Dariyoosh

Ok I found the answer to my question in another thread
Developer Key
Make sure that your program names starts with "Z" or "Y", otherwise the system will ask you to register the object because it thinks you are creating/changing in the SAP namespace.
In fact this was my error, my table name didn't start with neither "Z" nor "Y".
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Nov 13, 2010 12:34 PM

Processing and Released Status when we create a new Condition table

Hi all
I created a new condition table in M/03, and assigned one field to it, Generated and saved. Then added the condition table in the access sequence. There appeared two more lines below the field that i have assigned. One is Processing status and the other is released status, both are having green lights. what are these and what is its impact.
inputs will be highly appreciated
thanks

I myself could find the answer

Can the AET be used to create a new Z table?.

I understand that new user tables can be created/changed via EEWB, but, I keep reading that in CRM 7 we should now be using the AET tool. Can I create a new user table in AET, and if so, how?.
I only know of one way to launch the AET via the WebUI, and that's via the screen configuration tool. Of course this method would only allow us to ammend an existing structure/table and not create a new one, hence my question.
Anyone.
Jason

As far as I know EEWB never supported Z-tables except for those related to the SAP Business Partner. It's always been next to impossible to use the EEWB to add Z-tables for the business transaction model.
Jason can you please back your rant with some examples what the EEWB did with Z-tables that is not supported by the AET, for specific business object types. EEWB was never used to create stand alone z-tables. Also technically the EEWB was a big failure because it never supported currency and quantity type fields, so you could never automate your work.
I'm just little concerned that if you don't clarify your statement about the EEWB you are going to confuse people who read this thread in the future.
On another note the new tools available in EHP1 for enhancements are great and not hard to figure out. They definitely fill some needed gaps. Now just don't get me started about EHP1 not being in GA.
Take care,
Stephen

How To Create the New Advance Table in standered RN?

Hi Gurus,
How to create the New Advance Table in stander RN?
My requirement is slandered RN Having 1 Advance Table that advance table retrieve the two types of data 1.FUNC 2.BEHV Now My Client is asking split the data
1) FUNC Data
2) BEHV Data.
Now i did first one through Vo Extension Filter the FUNC Data. now i really struck the Another part plz help me i cont go the next step....pl z tell me what are prerequisites are needed and how to go next step plz help me Gurus.
Regards,
Srini

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

Create error and integration tables o source

Hi,
I would like to perform all the integration steps on the source schema and then just put the data on my target table. This means that I want to create I$ and E$ tables on the source schema. How can I handle this? Shall I write a new CKM? I'm working with Oracle as source and target databases...
Thanks!
R.

Mistake from me, I do not think this is entirely possible.
Using CKMs and most of the incremental update IKMs suppose that objects are created on the target (Error tables are always created on the target server).
The configuration that would work is with no control and an "IKM SQL to SQL Append" used from the source to the target.
Regards,
-FX
PS: Sorry, I had no coffee (yet) ;-)

Create a new "z" table as copy to mbew table

Hello Gurus,
I need a new "Z" table as copy of MBEW table for execute a stocks reports.
the MBEW table have 15 millions of records, but i dont know how i do for create the new table with all MBEW data.
I think make a table backup and restore this as ZMBEW object in DB library; but R/3 dont see this copy.
Any suggestions???
Best Regards,
Ernesto Castro.

Hi Ernesto,
first of all, you need to define this ZMBEW table in SE11 (DDIC) - you could copy the DDIC from MBEW. Then you have to activate that one and it will be empty.
I would then use CPYF with "from record 1" on OS level.
If you want to use your rstobj technique, I'm not sure, if something goes wrong, because not everything is changed:
- primary key contraint: "MBEW+0"
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Quality Mgt - can I create a new inspection type for source inspection

I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
What is the application of vendor inspection lot origin ? Can be used for source inspection ?

HI,
For source inspection.
If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
But before that , check whether you can use the existing insp type 01 / 0130.
You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
Also go through the help tips provide by SAP
Inspection Type for Insp. Lot Origin (Source Inspection)
    Inspection type for the source inspection
Use
    If you enter an inspection type for inspection lot origin 01 in this field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
Dependencies
    The inspection type must be active in the inspection setup (Quality Management view) of the material master.
    If a status profile is stored in the quality info record for the supply relationship, a goods receipt inspection takes place instead of a source inspection.
Regards
K.M.Arun

How to Create the new Field ( Table - Row) in SAP B1

I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase Document. that filed is not available in form setting. kindly let me know how to Create a new field in Purchase document.
Thanks

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

Create a new log file every hour

I have a program which receives measurement data and writes this data to TDMS file. However, I want to create a new TDMS file every hour. When I put a while loop in mu sub vi which creates the new file the program doesn't run. I have attached the sub vi. Can anyone help me out here?
Cheers
Attachments:
ConfigTDMS (SubVI)_loopTDMS.vi ‏16 KB

One trick for doing this is to prepend the file name with YYJJJHH See example
Then just check if file exists (if not create and add headder) when you write to file.
This also generates the reports in "alphabetical" order so windows explorer presents them chronologically.
Jeff

Exchange creates a new logs even no mailbox uses the storage group

We are running Exchange 2007 with 4 storage groups. We have migrated most of our mailboxes to Office 365 (there two web emails need to configure SMTP relay on Office 365) and stopped Exchange backup. However, the Exchange data still increases
everyday because of the log files. In checking the those storages, no one uses storage group 2 and 3, but these two storages have a new log files every day. Why? How can we find out which mailbox uses them?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

An easy way to see what mailboxes are being used on your system is to check your message tracking logs - run the following:
Get-TransportServer | Sort Name | % { get-messagetrackinglog -Start "11/3/2014" -ResultSize Unlimited } | Select TimeStamp, Sender, Recipients, MessageSubject, EventID, TotalBytes, RecipientCount, RecipientStatus, ServerHostName, MessageLatency*,
ConnectorID
This should get you the information if mailboxes have been used for sending or receiving email. If you have any retention enabled in your system, this will cause messages to be removed from mailboxes. And there is the common daily calendar management
that the systems does. If you have the recoverable items and recoverable mailboxes in place, these will be removed over time. And finally, Exchange closes log files so that the database can be recovered to a certain point in time, regardless of
whether there is traffic on the database. So even if you have removed all access from your mailboxes, and in fact even if you have removed all your mailboxes, you will have transaction logs being closed.

Creating a new Queue table

Hi All
Does any one knows how to create a queue table in the tablespace of the Oracle 10g database?

Hi
I used the command
begin
sys.dbms_aqadm.create_queue_table(
queue_table => 'JMS_ABC_QUEUETABLE',
queue_payload_type => 'SYS.AQ$_JMS_MESSAGE',
sort_list => 'PRIORITY, ENQ_TIME',
compatible => '10.0.0',
primary_instance => 0,
secondary_instance => 0,
storage_clause => 'tablespace system pctfree 10 initrans 1 maxtrans 255
storage ( initial 64K minextents 1 maxextents unlimited )');
end;
and it shows
ORA-01950: no privileges on tablespace 'SYSTEM'

Creating a new table similar to an existing one

Hi,
I need to implement a stored procedure with the follwing signature (simplified)
CREATE_TABLE_AS(p_NewTableName , p_OrigTableName , p_Col1, p_Col2, p_Col3)
It should do the following:
Creating a new, empty table with name p_newTableName. The new table has three columns, which names are passed as parameter p_Col1, p_Col2, p_Col3
The columns must be of the same type as the columns p_Col1, p_Col2, p_Col3 of the Table p_OrigTableName
How is this achieved?
I could read the column type information from the catalog sys.user_tab_columns, but I wonder if there is another solution
Marco

Hi Rob,
Hi,
Thank you, it works fine.
I actually need rows from two Original tables. I came up with the following query by adapting your query:
CREATE TABLE TEST_TABLE AS SELECT * FROM
(SELECT NAME FROM T1 WHERE ROWNUM = 0) t1,
(SELECT AGE FROM T2 WHERE ROWNUM = 0) t2;
I chose ROWNUM = 0 instead of 1=0. Doesn't this make a performance difference when the original tables contain a large number of rows?

Creat a new Datasource in BW

In Administration Workbench->modelling->Source Systems:I want to creat Data source in BW and replicate it from R3.I have already created a Data source based on a table in R3 and when creating it,there is only one item in applcation component:NEW_HIER_ROOT,not a tree hierachy.And in BW,when I creat a new data source,the background user in BW is grey,couldn't be changed.After I finished the procedure,system displayed that source system already exit.but it contains the tree hierachy.After I replicated,It hadn't datasource which I created.What's the problem?How to fix it? Give me the hits,please.Thanks.

Hi dear and welcome on board!
First of all, if you want to see all the other items of the std hierarchy, you have to execute RSA9 transaction...
Then, I'm not undersatnding what are you doing with your new datasource...
You simply have to create your datasource in RSO2...then go in RSA1, source system, replicate datasources...
Then go to the infosource page, create a new infosource, assign a source system and then you will see a list of available datasources...here you have to see your new one, choose it, manage the transfer structure/rules...
That's all!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !!

Creating a new logging table in source

Similar Messages

Maybe you are looking for