Creating a new Validation-Asset Master data

Hi ,
Requirement- a warning msg to popup when the capitalized date in AS01 ( under posting information) is a date in a previous fiscal year.
A new validation step was created in GGB0 with the rule:
Prerequisit: Capitalized on < Acquisition yr (ANLA-AKTIV < ANLB-VYEAR)
Check:Capitalized on < Acquisition yr (ANLA-AKTIV < ANLB-VYEAR)
Message:Capitalization is done in a previous year (warning)
and in OAVC,
the validation was made active for the respective company code.
However , an asset creation is possible for a previous fiscal year but the warning message did not pop up.
Please assist.
Thank you,
Niludini A

Hi Niludini
you can simulate the validation rule by clicking at - GGB0>> Asset accounting > select the validation rule> select step " " and then select simulation option in the dropdown under Validation tab.
After activating simulation, please try to create a new asset in another screen without closing the similation tab in order to understand whther the validation is triggerred correctly.
Please also verify that, validation is created under master data and prerequisite may be added as T code - "AS01" .
Best Regards
Jomon

Similar Messages

  • User Exit - Create Asset Master Data from MIGO

    Hi Experts,
    I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
    Cuold you help me?
    Thank a lot.
    Kind Regards
    Giampaolo

    Hi,
    Why you want to create the Asset master at the time of MIGO.
    Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
    If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
    If it is that important in your business process then give the authorization of Asset Master data creation to User.
    I personally feel this requirement is not feasible.
    Regards,
    Shayam

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • Validation user exit at asset master data

    hi all,
    at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
    Regards,
    Rob

    Hope the below user exits are useful:
    AAPM0001 |Integration of asset accounting and plant maintenance
    AINT0001 |Extended checks when posting an asset   
    AIST0002 |Customer fields in asset master
    Pls assign points as wa to say thanks

  • How to Create Approval for  New Business Partner Master Data

    Hello Experts,
    Is it possible for creation of an approval query such that while creation of New Business Partner:
    if
      a user forgets to add data in a field say TIN No. which is present in Tax Information,
    then
      the Business Partner Creation is withheld and sent for approval .
    Can someone please help me with creation of such an approval procedure ?
    Thanks and Regards,
    Manish Saluja

    Hello Manish...
    Sorry to say there is no way to create an approval template on master data (BP, item, etc).  However, we once had a similar problem and used the Alert Management to catch critical information that was missing during the creation process.  Everyone had to enter a credit limit with no exceptions.  I do not have the exact SQL in front of me, but it went something like this...
    Very simple...
    SELECT
    T0.CardCode,
    T0.CardName,
    T0.CreditLine
    FROM OCRD T0
    WHERE
    T0.CreditLine IS NULL
    Then we set an Alert Message to go off every minute and sent it to the Accounting Department.  Although it did not STOP them from adding the Business Partner, it sure did give someone the heads up to call the person who created it after looking at the Change Log.  Sort of a compromise...maybe that helps you???
    Take care - Zal

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • Screen Layout for Asset Master Data

    Hi all,
    we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
    I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
    It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
    So I go to the Customizing
    --> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
    --> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
    So there I should be deposited the "customer order" as a required field.
    But:
    1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
    2.  I am not able to add any field, in the above transaction?
    I am very grateful for any help.
    greetings

    Dear all,
    I want to come back to my problem listed above.
    In the APC Values Posting  (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
    For that I created in the asset master a new customer's own field "Customer Order".
    For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
    The new field "Customer Order" is now available in the asset master as desired.
    So far so good.
    Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
    Is this possible and how can I add my new field to an Account Assignment Object?
    Thanks in advance for any help.
    greetings
    Martin Buthmann

  • Creation of asset master data

    hi sap gurus,
    i have a problem regarding saving of asset master data.
    while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
    you cannot save the asset(correct depreciation error)
    Diagnosis: you have choosen the function save.the system found an
    internal problem when calculating depreciation for a check document.
    sys responce:The asset cannot be created
    procedure:1 check the error from depreciation calculation by
    performing the function "Test doc.'again.
    2 if you cannot correct the error ,contact your sys specialist.you
    must then cancel your current processing.
    please help me regarding the problem......

    hi
    check your depreciation area settings for the asset class

  • Modify fixed asset master data thru migo

    Hi experts,
    I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
    In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
    Do you think a way to call AS02 (change asset master data) thru MIGO exists?
    Best regards,
    Ruben

    Hi Ruben,
    Did you find a solution to your problem? I have a similar requirement.
    I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
    Cheers
    Wayne

  • Changes of asset master data - S_ALR_87012037

    Hi Colleagues,
    Could please help me by settings in order to see changes of asset master data ?
    I would like to know in which assets changes have been performed, in which characteristic and to know old and new value.
    There is one transaction : S_ALR_87012037 - but i cannot get horizontal look of values. I can only get vertical.
    In instruction there is shown that i should click function _ "use alv tree control" but i cannot see in my SAP version.
    is there any another option to get request display of data ?
    Thanks a lot for your response

    HI Gora,
    Standard report is the best option, but you can also use Table CDPOS:
    S_ALR_87012037 Output:
    You can also use Table CDPOS/CDHDR, in se16n.
    Regards
    Javed

  • How to put equipment no. in Asset master data  (manulaly)

    Hi Guru
         I have implement Asset module and link asset no. to equipment no. come from  Plant maintenance module. How I can put the equipment no. in field  equipment number / Tab Allocations  in Asset master data .  How I can do?
    thank you very much

    Hi
    You must have selected 'No synchronize' in Asset accounting for automatic equipment creation view-Specify Conditions for Synchronization of Master Data.
    If you wish to assign equipment to Asset after creation of equipment that means you have equipment number with you which is not assigned to any of the Asset and now you want to assign this to Asset master .
    Please go to IE02 and go to Organisation tab, here you need to assign your desired asset and save it.
    Now go to As03 and see allocation tab, you will find the assigned equipment number here.
    If you wish to let system assign equipment number automatically then please the settings in SPRO Asset accountingMasterdata - Specify Conditions for Synchronization of Master Data-Specify Conditions for Synchronization of Master Data to direct synchronization after savings, then you will not be required to assign equipment number manually, as soon as you will create an asset it will create equipment master as well for that asset and you can see in allocation tab, you can also deleat an equipment master if you don't want to create equipment master for a particular asset before saving the asset record.
    Cheers
    Mukta

  • How to include depreciation are in  asset master data

    I have already activated depreciation area in the asset class but it did not appear inn asset master data.
    How to include it there?
    Tks,
    Naej

    Hi,
    There are 2 aspect which you need to consider.
    1) For exisiting asset as  used AFBN as suggested by Srinivasa to activate the depreciation area.
    2) For new asset OAYZ configuation would populate the dep key and life.
    Thanks
    Vaibhav
    Edited by: vaibhav patil on Apr 22, 2010 10:40 PM

Maybe you are looking for

  • Can No Longer Write files to a NSF-mounted drive on one Server. Error -36

    Hi Folks: I have searched the Net (including these forums now) for several hours and found nothing definite. The story is this: I have a Fedora 14 server that, up to this point, has been acting as a file server. Sometime last week (around the 28th we

  • Customer Fields not extracted by FPBW.

    Hi, dear experts, I have a problem regarding as the extraction of open items via standard transaction FPBW. The fields about the customer information (ex: VKONT and GPART) are not extracted into the table DFKKOPBW. After a search through the OSS note

  • How to remove substitution/extension to a VO object in OAF

    Hi I've personalized a VO but now i wanna remove Substitution on this page i used the below procedure to delete personalization. Step 1. begin   jdr_utils.printdocument('/oracle/apps/pa/ci/server/customizations/site/0/PaSupplierImplementVO'); end; be

  • Importing multiple csv's (different structures) to destination table

    I am using a data flow task with flat file source and ole db destination and looping thru a folder to import multiple csv files into a destination table. What if I wanted to import different csv files, for example, with different structures or layout

  • Smartform or SAP Script output

    Hi, Iam trying to use the email functionality for PO and RFQ smartforms. or SAP Scripts. How can I enable or disable the email acknowledgement  for POs and RFQs. Regards MS <MOVED BY MODERATOR TO THE CORRECT FORUM> Edited by: Alvaro Tejada Galindo on