Creating a partition after Win server 20i12r2 install

Hi I wish to allocate a separate partition for my my win server 2012r2 (hp proliant gen 6 server.) The win 2012r2 was installed in a hurry without partitioning the HD raid4 … The ADS and home directories of users are in place and I wish to transfer the user
data (home folders) to the New Partition. How do I go about without doing a fresh install. pl help

Hi Journville,
Do you mean you have install a server 2012R2 but used up all your current disk and you want to migrate the current user profile data to another partition? It is not support
scenario.
User Profile folder relocation
Folder Redirection is partially supported by OS:
Correct functionality of redirected folder is delegated to third party applications and could generate problem after OS installation
The Directory Database can be moved to others partition, you can refer the following related KB:
Move the Directory Database and Log Files to a Local Drive
http://technet.microsoft.com/en-us/library/cc816720(v=ws.10).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Create 3rd partition after installing Windows 7 on Macbook Pro (Lion preinstalled)?

Hi, currently I'm having 2 partition: Macintosh HD - Lion (~680GB) and Bootcamp - Windows 7 (~60GB). Now I want to take ~600GB from the 1st partition to create a FAT32 data storage. My question is: is it possible to do so without reinstalling any OS?

Do not add a partition after BootCamp. BootCamp manipulates the boot-sector of a Mac disk to allow dual-booting. But manually adding a third partition will break that tenuous multi-boot balance.
Many threads posted by people who need to restore OSX from a backup and lose their BootCamp data due to system instability attest to the tourble you can cause.
Buy an external drive and use that for FAT32 (or EXFAT to allow files larger than 4 GB) storage.

How do I create a self-contained WIn 8.1 Install that has recovery and WinRE available without external USB or network needed?

Hello.
I am looking to create a fresh installation of windows 8.1 (Or soon Windows 8.1 Update 1) *WITH* a recovery partition on the same drive thatit is being installed to. Kind of like how the setup on Surface Pro/Surface Pro 2 is (6 partitions,if memory
serves: one containing Boot, system, UEFI, WinRE , OS, UEFI, and RECOVERY). That means that I can refresh/reset my machine without using any other media (USB et al) and I can use the OS to reboot into my UEFI for my motherboard.
Any assistance would be appreciated.
Kind regards
Anti-Climactic Notion

Actually, I've long since answered and completed this myself.
Better links are a combination of:
http://reboot.pro/topic/19156-create-a-bootable-winpe-50-x64-usb-drive/
http://dfarq.homeip.net/2014/02/how-to-slipstream-updates-into-windows-8-1/
http://www.nextofwindows.com/how-to-skip-product-key-when-installing-windows-8/
http://systemsadminguy.wordpress.com/2013/11/16/how-to-update-surface-pro-2-recovery-image-drivers/ (Save use drivers for your particular machine)
and lastly
http://technet.microsoft.com/en-us/library/hh825212.aspx
Read, comprehend and compile what you've learned and it's possible to do-it yourself like a pro (Which I have done for all of my PCs now).
Anti-Climactic Notion

Cant Able to Create New partition after uninstall Ubuntu, Please help!

Hello Everyone,
i installed Ubuntu before but i don't like it, then what i did is, (i had windows 7 dual boot with ubuntu) while running windows 7, i deleted Swap area partition and home partition of Ubuntu, then i saw that partitions are combined which was fine, but when
i tried to create it, a error appeared that "there is not enough space available on the disk to complete this operation"
hence i cant able to create unused partition, how to fix that,
i even tried to create from windows 7 disk too, but same error,
Please help me.
PICTURE : http://social.technet.microsoft.com/Forums/getfile/455232

Go to
http://download.cnet.com/EaseUS-Partition-Master-Free-Edition/3000-2248_4-10863346.html and download the Partition Magic utility.
This problem is caused by Windows not recognizing the Ubuntu partitions. Windows is not designed to work with foreign partitions so this problem is caused by Ubuntu.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

A22m and A21m will not install/recognize internal Ethernet card after WIN XP clean install

Hello,
I have few of A22m's and A21m and a few weeks back I did clean install WIN XP SP2. All is good with the exception of Ethernet card - which is not recognized after the installation. Previously those systems were running XP SP1 and there were no issues with the Ethernet card.
I have tried all possible driver downloads from Lenovo/IBM support site including Intel and 3com and still nothing. Supposedly the Ethernet drivers are native to win XP, but for some reason I can't get them to work.
I want to donate these units to charity, but I want to make sure all works fine.
Thanks in advance,
Andrzej

Welcome to the forum!
Please post the 7-character model number(s) of your A2x ThinkPads (should be something like 262x-xxx), so we can determine the type of mini-PCI card installed.
Also, after downloading the drivers, have you unpacked them from the appropriate directory, should be something like C>Drivers>Win>Ethernet.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

K8N Diamond - Bluescreen after Win XP (SP1) Install

Hi. After building my system today I installed Win XP (SP1). The pre-install and graphical install went fine with no errors. On the first boot after the install, the Win XP logo appears for 5 seconds, there is then a quick flash of bluescreen then the system resets. The system is booting off of an Adaptec 29160 SCSI Controller with SCSI HDs. IDE is enabled in the bios for DVD & DVD Writer and the SATA controller is disabled in the bios. I did not use the Nvidia or Silicom SATA drivers during the initial OS install since I had disabled the onboard SATA/RAID controllers.
If I boot the system and boot into safe mode rather than normal I can get into Windows but there isn't any decent logs so far to go on without some additional work.
Is there something I've missed out ? I've done a quick search but couldn't find any related posts on the forum. I've listed my spec below.
Thanks for any help.
KN8 Diamond
2 x 512MB Dual Channel EL PC-3200 OCZ Platinum Rev2
OCZ Powerstream 600W PSU
Adaptec 29160 Raid Controller
Gainward 6800 Ultra Golden Sample
Creative Audigy 2 ZS Platinum Pro

Hi. I'm just going to start removing/moving hardware and carry out more testing, but I've booted into safe mode and justed the error settings so that I can actually read the error. The Windows stop error is 0x0000009C MACHINE_CHECK_EXCEPTION. I've just completed a MEM86 test and had no errors on the 2 x 512 Sticks.
I'll adjust some of the hardware and if that doesn't make any different the only bits it leaves are the CPU and motherboard.
Thanks again.

SD card reader doesn't work on Satellite C850-1CN after Win 8.1 install

Hi,
Since I installed Windows 8.1 on my computer Satellite C850-1CN ref. : PSKCAE my SD port does not work
I would like to know if there is a driver I need to download because I searched the site for a pilot port but in vain ...
Sorry for my English I speak French and I hope I'm in the right forum

Hi
You have to download and install the card reader controller driver for Win 8.1 system
This driver should be the right one:
[Card Reader Controller v 6.1.8400.30136 Windows 8.1 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=3417&language=13&selOS=all&selType=316&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=316&page=1&ID=88526&OS ID=46&driverLanguage=42]

How to boot service/recovery partition after a Windows 7 install

Does anyone knows how to restore the boot feature of the service / recovery partition ?
I did a Windows 7 RC install and it seems to have disable booting to the recovery partition. I can see that both the SERVICEV003 and Lenovo partition are still there.
Thanks.

Hi all,
it worked as described in the link i provided:
sh-3.2# diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 GB     disk1
   1:       Microsoft Basic Data MYSD2GB                 2.0 GB     disk1s1
sh-3.2#
My Recovery HD is back and boots.
Thank you very much for help.
Regards, Peter

X1 Carbon restore after Win 8 clean install

I've tried to boot to the F11 recovery, but the system will not boot to the recovery partition - and it is there. Is it possible to still boot to that partition and recover the original Windows OS or will I need to get recovery media some other way?
Thanks

Called Lenovo about it and they sent the recovery media.

After win xp install?????

what do i do after win xp is installed...i reboot and it stays in win xp...i want to boot into osx...any help much appreciated!!! thanks in advance!!
this is a new macbook 1.8 ...it is for work...i installed a brand new win xp system earlier today... the mac os was all up to date, was done via software update....

the moment you see the gray screen hold down the option key and it will bring up mac osx or windows

Windows Server 2012 C Drive gets always full with exchange server 2013 installed

Hi All
My C drive gets full always with exchange server 2013 installed what would be the reason because this is causing extremely bad to my environment can somebody help me please
Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

Hi,
Based on your description, I understand that this issue (C drive gets always full) occurred after Exchange
Server 2013 installed.
à
But my exchange server is installed in different Drive (EX: D)
I suggest that you should check file system to see what folders or files are taking up the space recently.
This issue may be not related to Exchange server.
Please refer to the following article and enable Disk Cleanup Utility. Then monitor the result.
Enabling
Disk Cleanup Utility in Windows Server 2012
Meanwhile, please check if the winsxs directory is growing bigger.
How
to Reduce the Size of the Winsxs directory and Free Up Disk Space on Windows Server 2012 Using Features on Demand
By the way, please check if you have installed update rollup 2836988. I noticed that Windows.edb file grows
very large. For more details, please refer to the following KB.
The Windows.edb file grows very large in Windows 8 or Windows
Server 2012
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to create extra partitions for windows 7 after installing boot camp

hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank you

Last login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1951845952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128           7
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS

Problem Installing EM Cloud control 12c in Win Server 2008

Hi All,
I having problem installing the EM in win server 2008 64bits. I already installed java run time but when i click on the setup.exe in the disk 1 after unzip it does not show the installation wizard and any error message. Did i miss out something? do i need to create the user group and user as stated in the installation guide as stated in this link Installing Enterprise Manager System - 12c Release 1 (12.1.0.1)?

Hi, can you open an SR for this issue and share the number. Lets check few basic things:
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder ?
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install      libskgxn      plugins     response     stage     WT.zip
jdk     oms     runInstaller      wls
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM   ( for windows it will be orInstaller.err and log )
You donot need any user group or any thing created.

Creating a partition after Win server 20i12r2 install

Similar Messages

Maybe you are looking for