Creating a pivot table view with two levels of headers

Hi,
I have a requirement in which i need to have a common heading for two or more columns.
For Example, I have two columns like total number of loans and Total loan amount. As per my requirement, i need to give a common header 'Total loan' as the main header and amount and Count as two subheaders under the main heading in the pivot table.
In table view, i would be able to make it using the display column and table header property. But, i need to get the same in pivot table as we have to use pivot table view instead of table view.
Please Help me on this issue.
Thanks in Advance
Deepak

Hello,
create one column in criteria and change it's fx to case when 1=0 then Products."Prod Name" else 'Tota Loanl' end
Now go to pivot and drag this column to Columns block of pivot. But keep this column up of Measure Labels and Now, go to column Format values.
Mention cell horizontal alignment to Center
see the following screenshot, Header is the column i created with the above functionality.
!http://i852.photobucket.com/albums/ab83/kishorg86/Header.jpg!

Similar Messages

  • Using Measures in Rows Section of Pivot table view

    Hi,
    i have a report with 6 columns, out of which A, B are dimensional and C,D,E,F are Fact columns(measures).
    My requirement is to take Column A and Columns C,D,E in Rows section of Pivot table view with column F measure in Measures setion and column B in Columns Section.
    I created the Pivot view as desired but the measure columns placed in Rows Section are not displaying the correct results
    Can someone provide ur inputs on this.
    Thanks in advance.

    For Pivot Table view Measures should be in Measures section only, then only those columns will show correct result

  • Need to eliminate Space between two Pivot table view  in OBIEE 11g

    Hi,
    I have a requirement to eliminate space between two pivot table views. In a single report I have two Pivot table with two different column, I placed both of them one after another, but I need to eliminate the space between two pivot table views as if it should show as a single pivot table in OBIEE 11g.
    Could anyone please let me know how I can do this in OBIEE 11g?
    Thanks in Advance
    Anirban Mitra

    If I create narrative view it will be another view. And if I put that in between that two pivot view, it will show the space. I need to remove space between two pivot table within a single report so that it can appear as a single pivot view.
    Thanks

  • How to create table view with reference table

    Hi experts,
    How to create table view with reference table in SE11, plz gve me stp by stp procedure.
    pints grnded for hlp.

    Hi
    Go to Tcode se11 choose view and enter the name and create a popup opens up choose database view option
    enter the description
    On the left hand side choose the table name.
    Click on view fields tab and choose your table fields.Here you can choose which fields you want in your view.
    Save and then activate.
    Hope this helps.
    Regards,
    Harish

  • Not getting required format with pivot table view

    Hi,
    I need to create in the bellow format...
    POD     Data     01-JAN-08     01-FEB-08     01-MAR-08     01-APR-08     01-MAY-08     01-JUN-08     01-JUL-08     01-AUG-08     01-SEP-08
    AFA     Minutes/Month     44640     41760     44640     43200     44640     43200     44640     44640     43200
         P1 Login Downtime (Min)     9     0     0     0     114     99     30     42     0
         Actual Maint Time taken (Min) 1902     2350     439     409     136     1390     51     189     400
         Availability %     99.98% 100.00%     100.00%     100.00%     99.74%     99.76%     99.93%     99.91%     100.00%
    AHA     Minutes/Month     44640     41760     44640     43200     44640     43200     44640     44640     43200
         P1 Login Downtime (Min)     9     786     99     40     64     0     0     97     134
         Actual Maint Time taken (Min)     199     2412     388     290     136     500     261     156     2688
         Availability %     99.98%     98.00%     99.78%     99.91%     99.86%     100.00%     100.00%     99.78%     99.67%
    AJA     Minutes/Month     44640     41760     44640     43200     44640     43200     44640     44640     43200
         P1 Login Downtime (Min)     39     0     0     0     30     0     30     42     2
         Actual Maint Time taken (Min)     10868     2913     426     468     1187     564     391     268     1959
         Availability %     99.88%     100.00%     100.00%     100.00%     99.93%     100.00%     99.93%     99.91%     100.00%
    ANA     Minutes/Month     44640     41760     44640     43200     44640     43200     44640     44640     43200
         P1 Login Downtime (Min)     148     52     0     13     12     0     83     92     0
         Actual Maint Time taken (Min)     1104     2155     158     2701     383     681     533     1190     765
         Availability %     99.66%     99.87%     100.00%     99.97%     99.97%     100.00%     99.81%     99.79%     100.00%
    I am able to get data in the compound table view....
    POD     Month Year     Minutes/Month     P1 Login Downtime(Min)     Actual Maint Time taken (Min)     Availability %
    AFA     1-Jan-07     44,640     0     0     100
         1-Feb-07     40,320     0     0 100
    AHA     1-Jan-07     44,640     0     0     100
         1-Feb-07     40,320     0      0     100
    But I am unable to get required formate in the pivot table view. How can I get required format in PIVOT TABLE VIEW.
    I tried in somany ways, but i am unable to adjust
    like
    AFA     Minutes/Month     44640     41760     44640     43200     44640     43200     44640     44640     43200
         P1 Login Downtime (Min)     9     0     0     0     114     99     30     42     0
         Actual Maint Time taken (Min) 1902     2350     439     409     136     1390     51     189     400
         Availability %
    Please help me on this? Is there any manuall, which can help me on this?
    Thanks alot in advance.
    Thanks
    Pathan

    Pathan,
    This can be achieved by dragging the "Measure Labels" object to the rows. Put POD and Measuers object in to the rows and months in columns.
    that will work.
    thanks
    Madan Thota

  • Problem in pivot table view

    Hello gurus,
    I need a help in pivot table view. In pivot table, I have to show measure in accordance to month. For example show sales as per region by month name.
    Region               Sales                         
              Jan     Feb     Mar     Apr …………..Dec     Avg     Total
    A          10     40     92     92          32     xxx     xxx
    B          73     83     39     78          87     xxx     xxx
    So this is what I have to do. I am able to do this with one measure with created new calculated item. Now I have to create this report using two measures and the in the new measure I have to show only average and total.
    For example
    Region               Sales                              Target
              Jan     Feb     ………Dec     Avg     Total Avg Total
    A          10     40          32     xxx     xxx          xxx          xxx
    B          73     83          87     xxx     xxx          xxx          xxx
    Here sales and target are two different measures. The problem is when I add target column in measures; it will show all the month which I don’t require at all because I need all the month for sales only and for target I just need average and total. I try from head to toe but not getting any thing like this.Can i do this using other view if possible.
    Help me guys. If you need more explanation then please let me know.
    Thanks
    Regards,
    Suhel

    Anybody replies please.....
    Is this possible that we can use Calculated column in other calculation in pivot table. For example, total of one measure divided by total of another measure in pivot table.
    Regards,
    Suhail

  • No data for Parent-child hierarchy column in Pivot table view

    Hi all,
    I used OBIEE 11.1.1.6.2 Version.
    I drag one Parent-child hierarchy column and one measure and show result with a pivot table view.
    But when I click "+" icon to show detail level data,
    It messaged that: "*the layout of this view combined with the data,selections,drills,or prompt values chosen resulted in no data*."
    But it can show every-level data when I used table view.
    It was so strange..
    Did anybody meet this before?
    Thanks in advance.
    regards,
    Anne

    Hi,
    Yes, I have the same problem with pivot table for hierarchy dimension.
    If you use a normal table (not pivot) it seem to work. Unfortunatley with restrictions as normal table view have.
    Same problem still exist in 11.1.1.6.5
    I have logged a SR to Oracle about this.

  • Creating a Pivot Table in a XML publishe

    When creating a Pivot Table in a XML publisher in Word, is there a way for a Pivot table to respect the fact that it's inside of a group function? I'm looping over site , and within each site I want to create a Pivot Table that has Months going across and SUB inventories going down, but only for that site.

    Hello,
    create one column in criteria and change it's fx to case when 1=0 then Products."Prod Name" else 'Tota Loanl' end
    Now go to pivot and drag this column to Columns block of pivot. But keep this column up of Measure Labels and Now, go to column Format values.
    Mention cell horizontal alignment to Center
    see the following screenshot, Header is the column i created with the above functionality.
    !http://i852.photobucket.com/albums/ab83/kishorg86/Header.jpg!

  • How to create variant for table/view ?

    Hi,
    When I go through SM30, I find a radio button called variant. I don't know the effect.
    Can anyone tell me how to create variant for table / view ?
    I want to know when we need to create variant for table/view.
    Best regards,
    Chris Gu

    hi ,
    Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
    For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
    If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
    Procedure
    To create a new variant:
           1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
           2.      On the variant maintenance initial screen, enter the name of the variant to be created.
    Note the naming convention for variants (see below).
           3.      Choose Create.
    If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
           4.      If there is more than one selection screen, select the screens for which you want to create the variant
    5.      Choose Continue.
    The (first) selection screen for the report appears.
    If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
           6.      Enter the desired selection values, including multiple selection and dynamic selection.
           7.      Choose Continue.

  • How to replace null as 0 in  obiee11g pivot table view?

    Hi,
    I am using obiee11g pivot table view,
    I have tried so many views but it's not work. My oracle support team also tired but could not solve it
    1.) used BIN method is that measure columns
    2.) ifnull(column name,0)
    3.) case condition:
    Case when columns is NULL then 0 else column end
    4) data formate override custom formate option
    It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
    E.g. if you want zeros (0) instead of null then enter:
    #,##0;-#,##0;0
    http://obieeelegant.blogspot.com/2011/06/how-to-replace-null-values-in-obiee.html
    Note:
    I don't want to show strike-rate and custom message in that blank cell. I want to show blank cell(null values) as 0 in the obiee11g pivot table view.
    Obiee10g version is working fine only issues in obiee11g
    Thanks in advance...
    Thanks
    Deva

    I tried this on 11.1.1.6.2 but I can't see good results.
    I choose subject area A-Sample Sales and I choose:
    T02 per Name Month on rows
    P1 Product on columns
    Measure : IFNULL("Simple Calculations"."17 Net Costs", 0)
    Prompted Year 2008
    On product Install and 2008/01 there isn't value...and I put Ifnull in my formula...
    My problem is that I want to do a conditional format when Product = Install. So I have all column with background colour except Null values...so is not pretty...
    If I add custom numeric format I can see 0 but not with background colour...
    I add a picture:
    http://imageshack.us/photo/my-images/600/tablegk.jpg/
    Any help about it??
    Is a bug on obiee??
    Edited by: Alex1 on 04-sep-2012 4:28

  • Can we create a pivot table of Excel in a JSP page using POI

    Hello,
    I want to know whether we can create a pivot table of excel sheet in a jsp page using POI package from apache.
    thank you.

    Hi Alex,
    Many thanks for replying.
    I followed the link, but unable to get correct output.. I have shared the template earlier. I can share the template once again.
    It would be grateful if you give me share the working template with table of content.

  • Calculate a daily average in pivot table view

    I am new to biee 11g and would appreciate any assistance with the following.
    I have a pivot table view which includes a hierarchy column and a single measure, units. The pivot is filtered based on date that is prompted.
    I need to include a column in my pivot table that displays the average unit sales for the period being displayed based on working days. ie total units for the period divided by the number of working days in the period selected. The date dimension contains a flag indicating whether a date is a working day or not.

    Measure Columns can't be hidden like an attribute. How ever you can use custom style sheet for Value and Header Properties to not show the measure.
    for the "Custom CSS Style Options (HTML Only)" under measure properties of the column set "Use Custom CSS Style" value to 'display:none'.
    Let me know if this worked.
    Regards,
    Jay

  • ADF -11g : Question on how to create a pivot table

    Hi,
    I am trying to create a dynamic pivot table (the number of column and row layers change for each request) and I cannot use a data base structure to back it up.
    I thought of doing it through a managed bean but in order to do it I need to know how to create the PivotTableModel.
    The pivot table model requires a data source object and I do not know how to create it to support multiple row and column layers.
    Is there a default data source object that I can extend, or better yet is there a written example on how to create a pivot table model using a managed bean.
    Thanks,
    Or
    Edited by: user638363 on Dec 18, 2008 7:02 AM

    Hi,
    beyond the documentation, the pivot table is described in
    http://technology.amis.nl/blog/2593/adf-faces-11g-reloading-the-matrix-using-the-pivot-table-component
    http://technology.amis.nl/blog/3786/creating-a-salary-heat-map-with-the-adf-11g-faces-pivottable-component
    http://technology.amis.nl/blog/3673/adf-11g-richfaces-a-closer-look-at-the-pivot-table-data-visualization-component
    I am not aware of any sample that directly meets your requirement
    Frank

  • How do I create a pivot table in numbers?

    How do I create a pivot table in numbers?

    SO HERE'S WHAT I GOT TO WORK:
    Truth is all the real functionality of categories and pivot tables exists in the formulas. You just have to
    Create a new table with a list of the categories in the header column.
    Add SUMIFS() formula from the browser into the next column.
    Enter your arguments and make sure to check "Preserve Column" for each of them.
    Although it might not be apparent, you can enter multiple test value and condition pairs.
    While I admit the formulas are not nearly so graphic as categories, they are cleaner and less restricting, and they aren't any more difficult to work with than pivot tables.

  • How to create a dynamic table region with dynamic VO

    Hi All,
    I have a requirement to create a dynamic table region with a dynamic VO.
    I need this because at runtime only the user will select the table name. So based on that table name, i have to create a table region to display the records.
    I already created a dynamic VO. Could anyone share the code for dynamic table region creation.
    Thanks in Advance.
    Thanks and Regards,
    Myvizhi

    Hi All,
    I have a requirement to create a dynamic table region with a dynamic VO.
    I need this because at runtime only the user will select the table name. So based on that table name, i have to create a table region to display the records.
    I already created a dynamic VO. Could anyone share the code for dynamic table region creation.
    Thanks in Advance.
    Thanks and Regards,
    Myvizhi

Maybe you are looking for