Creating a QuickTime movie with the new Canon T5i camera in iMovie 9.0.9.
Help needed creating a QuickTime movie with the new Canon T5i camera in iMovie 9.0.9. The project is done and looks good...I need help understanding what settings need to be set so I can make a QuickTime movie in the highest quality that would fit the ratio of 16.9 to be sent out to my YouTube page. I played around with some of the settings and have not come with the right setting for the video. I want the highest quality with the lowest amount of megabytes…thanks
I would suggest using SHARE/EXPORT MOVIE and choose 1920x1080 (if your source material supports this).
That should work well in YouTube.
If you want to go further with custom QuickTime settings, here are some that should work, but in my experience, it will be no better than using SHARE/EXPORT MOVIE.
follow the instructions below to create a .mov video that will work on YouTube:
In iMovie, select Share > Export Using QuickTime
Next, you may want to check your Options to verify that the following settings are correct:Video settings
Compression Type: H.264
Frame Rate: 30 is preferred. 23.98, 24, 25, 29.97 are also acceptable.
Data Rate: Automatic
Key Frames: Automatic
Frame Reordering: Unchecked
Audio/Sound settings
Format: AAC
Click Show advanced settings and choose Constant Bit Rate as encoding strategy
Other settings
Size: Choose the original size of the video
“Prepare for Internet Streaming”: Fast Start
Similar Messages
-
HT3775 How can i play my avi formatted movies with the new mac OSX 10.9.2 update?
How can i play my avi formatted movies with the new mac OSX 10.9.2 update?
Try using VLC or installing both QuickTime 7 and Perian. Nothing will work with all AVIs; some of them require codecs not available for Mac OS X.
(105507) -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?
You're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content -
When I try to upload a movie from I movie with the new iOS 7 it says sign in to YouTube when I do the screen goes back to where are started and it says to sign in again. Any suggestions?
Google seems to change their login security occasionally, and apps that assume it will work a particular way get left out in the cold till they are updated, since the login process is hard-coded into the app.
Here is the automated e-mail I received today from Google when tried to upload a movie using iMovie.
We recently blocked a sign-in attempt to your Google Account [REDACTED].
Sign in attempt details
REDACTED
If this wasn't you
Please review your Account Activity page at https://security.google.com/settings/security/activity to see if anything looks suspicious. Whoever tried to sign in to your account knows your password; we recommend that you change it right away.
If this was you
You can switch to an app made by Google such as Gmail to access your account (recommended) or change your settings at https://www.google.com/settings/security/lesssecureapps so that your account is no longer protected by modern security standards.
To learn more, see https://support.google.com/accounts/answer/6010255. -
hi sir i have revoked the distribution certificate , and in one of my iPhone app i had used the same certificate if i will upload the next version of same app then will it create any problem or with the new certificate i can upload my next version of myapp or not plz tell me as soon as possible
Sounds like you need to ask your question in the developers forums.
-
I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.
Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC
-
Running CS5 on a Madbook Pro. Will not open RAW image files from a new Canon TRi camera. Can I update to latest RAW processor with current CS5, or must I update to CS6 on the MacBook?
JackACR 7.4 is the one that will read T5i raw files and it is CS6 specific. You can upgrade for $200 Standard or $400 Extended in you need 3D support.
You can also see if converting your T5i files to .dng format will do just as well.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 7.4 -
Because (for reasons which are not relevant to my questions): I can not reasonably migrate to the newest PSE Versions and I am more or less stuck for a couple of years to the use PSE V10. I am therefore looking for a relatively efficient solution to process/edit (a small percentage) of the RAW Files of my new/future camera(s) with the combination of PSE V10 and CR 6.4.1 (according to my understanding PSE V10 does not support CR 8.6 – PSE V10 does not even allow me to import RAW Files of new cameras into the PSE catalog).
I was hoping that the DNG Converter could be a good solution for me. I was intending
to convert the RAW Files of my new camera (and of my future new cameras) with an up-to-date version of the DNG converter,
import the .dng Files into PSE V10
and then look-at (and then for some few of them: edit) the DNG Files with the combination of PSE V10 and CR 6.4.1.
However, I got recently the impression, that the only Camera Profile of CR 6.4.1 that renders reasonably well the DNG Files of my new Canon Powershot G16 compact camera is the “Adobe Standard” Camera Profile. In my tests with the combination of PSE V10 and ACR 6.4.1, the rendering of these DNG Files with other CR 6.4.1 Profiles (e.g. the “Camera Faithful” Profile) is (regarding colors and brightness/contrast) really ugly and (for a non-expert like me) more or less unusable (while the rendering of the same DNG File with the “Camera Faithfull” Profile of the combination of CR 8.6 + PSE V13 is quite reasonable).
May I please ask the following questions to somebody who is familiar with DNG and CR?
Do my observations (i.e. ugly rendering of Canon Powershot G16 photos with the “Camera Faithful Profile” of ACR 6.4.1) correspond to what DNG experts should and are expecting?
What is the probable reason of the ugly rendering of the “Camera Faithful” Profile of CR 6.4.1? Does the DNG converter not include a G16-specific “Camera Faithful” profile in the DNG file?
Or do you think, that I made something wrong and that I am the one to blame for the ugly rendering with the “Camera Faithful” Profile used by CR 6.4.1? If that’s the case: what did I probably do wrong and what can I do better?
Do you think that with the combination of PSE V10 and CR 6.4.1, I will have similar problems with the DNG conversion of Raw files of future cameras like the follow-on to the Nikon D5300 or D7100 (which I will probably like to buy once available)? Or do you think that the problems that I encountered with the Powershot G16 photos are unlikely to happen with most other new camwras?A lot of thanks in advance for your answers.
In case you might wish to look at the typical rendering of one of my DNG Files (created with Version 8.6.0.254 of the DNG converter) of a Canon Powershot G16 .cr2 photo, I uploaded at https://www.dropbox.com/l/T3LJyZWkBZpcKkNe8S8ufr
following screenshots:
rendering with PSE V10 and CR 6.4.1 with the “Adobe Standard” Camera Profile” – looks OK
rendering with PSE V10 and CR 6.4.1 with the “Camera Faithful” Profile – looks ugly.
I did not create screenshots of the ugly rendering by CR 6.4.1 with other Camera Formats..
rendering with PSE V13 and CR 8.6 with the “Adobe Standard” Camera Profile – looks OK
rendering with PSE V13 and CR 8.6 with the “Camera Faithful” Profile – looks OK
screenshot of the unedited jpg. File created by the camera - looks OKThank You very much to all of You: in alphanumerical sequence to 99jon, to R Kelly and to ssprengel. You spoiled me with the Information in your answers. Thank You very much for it.
Based on your answers I will first try the probably simplest solution: the download of ACR 6.7.
If that will not work for me, I will try/investigate something else, that, if I interpret your suggestions correctly is the following: create with the combination of PSE 13 and ACR 8.6 profiles that I will try to use with the combination of PSE 10 and ACR 6.7 or 6.4. That is an idea that I was not at all aware of and that I owe to you.
All that is quite new to me, and I can therefore imagine that I will come back to you and ask for detailed suggestions or directions.
A Detail: it is on the same machine / same Windows-occurence that I have installed the combination of "PSE V10 + ACR 6.4" and the combination of "PSE V13 and ACR 8.6".
1) The main reason why I can not use for my main real-life "productive" PSE Catalog the combination of "PSE V13 and ACR 8.6" is the lack of Support of/by the 32-bit mode "KODAK Digital ROC Professional" Filter/Plug-in in a PSE V13 Environment. I need and will need that filter for a couple of years for the retouching/restoration of thousands scanned Versions of my old slides that have a strong color-cast. I am also using the 32-bit mode "Kodak Digital GEM Professional" Filter for a strong noise reduction in the scanned Versions of my old slides (but I can imagine, that I could find good 64-bit mode alternatives to the GEM Filter).
2) In addition I have with the V12 and V13 PSE Editors, for a lot of my photos files, problems with the wrong Dates/Times assigned by the V12/V13 PSE Editors to new file containing a new/edited version of my Foto files.....
But these 2 previous items are other stories/problems that I would like and shoud keep separate.
Thank You again for your wonderfull help.
Robert -
Using iMovie '08 on an iMac G5 with the new Canon and Panasonic cameras???
Once you get an HD component, you want to rapidly upgrade the rest of your system to HD. My question- which of the recently announced Panasonic and Canon cameras with 1080i or 1080p(24) can I use with iMovie 08 on an iMacG5? Do these new flash-based cameras have any ability to support nonAVCHD which isn't good for sports.
I have had good results recording football games in AVCHD, but you may not consider it acceptable.
A G5 is on the lower borderline of acceptable hardware for iMovie 08, so you should expect long importing and processing times.
AVCHD in iMovie requires an intel processor for importing. There may be a workaround by using third party software called "Voltaic". Do a search on these forums to find posts from people who use this.
Here is a sample of a AVCHD movie of a football game recorded on a Panasonic HDC-SD5 using 1920x1080. This version is in the medium setting for WebGallery.
http://gallery.mac.com/htimjohnson#100343 -
Can I export Quicktime movies with the same quality/compression as DVD
I would like to export iMovie HD 6 projects as quicktime movies of about the same size, compresson level and quality as I get with iDVD. I would like to watch them on my macbook, but don't want the dvd interface. My attempts have tended to produce something close to full quality that requires too much disk space (10 to 12 G per hour) or tiny, overly compressed videos that only an ipod could love. Does anyone know how to set the custom settings to get this?
if your projects are Standard (=not HiDef), the iPhone preset in the export options work good for my standards..
or..
Export with Quicktime/Options... h264, original res of your project.. ='small' and good looking.. -
HT2948 Will Final Cut Express 4 work with the new Canon XA10 AVCHD ??
I'm in the process of shopping for new cameras for my students. We edit on Final Cut Express 4 HD. I want to buy the Canon XA10camwras which record to SD cards. I keep reading AVCHD video and am new to the technology. The B&H website says this camera :
Product Highlights
1/3" CMOS Sensor
Native 1920 x 1080
24Mbps AVCHD Recording
60i, PF30, PF24, Native 24p
64GB Internal Flash Drive
Flash Memory
The XA10 Professional Camcorder allows users to record up to 24 hours of clear high definition video to a 64GB internal flash drive or to two SDXC-compatible memory cards. With Relay Recording, the camcorder automatically switches video recording from the internal drive to the SD memory cards when the memory becomes full.
Video can be copied from the XA10's internal drive to removable SD memory cards. That makes it easy to insert the card into your computer or HDTV's card reader and view your recorded footage immediately. Double Slot Recording allows recording to two SD cards simultaneously, providing an automatic backup while shooting.
AVCHD Codec
The XA10 features the AVCHD codec. AVCHD (Advanced Video Coding High Definition) was announced in 2006 and is quickly becoming the standard for professional camcorders. AVCHD utilizes MPEG-4 AVC/H.264 compression technology similar to the technology used in Canon's HD DSLRs. In addition to professional grade camcorders, AVCHD is very popular in the consumer market and as a result most nonlinear editing software, both professional and consumer, have full support for the codec; this makes for easy compatibility with the XA10 no matter what system you choose.
Will I be able to take out the SD cards, put them in a card reader, and simply log and transfer into Final Cut Express? Again, I'm a novice and don't know what a lot of this means.
Thanks!!!!FCE should work with the 60i (interlaced) footage this camera produces.
Also you should be able to load the SD and capture.
I do not have one or used one with FCE, the specs indicate it should.
Maybe a current owner can chip in their experiences.
Al -
No sound and meters do not move with the new Motu Traveler
I recorded four channel of audio with the built in sound on my power book G4 1.6 until I got a Motu Traveler fire wire audio interface. I got to preference/Audio in Logic and switch to Motu. Then when I play the song, there is no sound and the channel meters do not move. I have Logic Pro 7 version 1.0.1. I updated the OSX Tiger to 10.4.2 and the Motu fire wire to 1.2.5.2.
I can here audio throe head phones on the Motu if I plug a mic in to it but it will not show up in Logic.
Yes the fire wire cable is connected. It reacts to logic start up (click,click etc,.)
What am I doing wrong.
I'm an ex Cubase user whom switched to Logic and thought it would be easy.I dont use logic but I have had some similar audio routing issues with my mac and my traveler. if you can hear audio out your phones see if the default stereo output for the traveler is set to phones, that could cause this problem. click on the motu fire wire icon (not the cue mix dsp) and make sure you default outs are set to whatever you have speakers plugged in, also go into your audio midi set up for OSX and make sure every thing is for the traveler to be the default output. you might have to re-launch logic to make it see the changes, not sure though i dont use it.
-
I want to continue to use my CS4 created projects while upgrading the Creative Cloud. I have an Imac, Ipad, Iphone 6 and Macbook Pro. Am I going to lose or not be able to bring those .ai files from CS4 into the new software?@
Please refer to:
Can You Save/Open CS6 Files on CS5, CS4 or CS3 – and Vice Versa? | ProDesignTools
Can You Open/Use/Export/Save Adobe CC Files on CS6 – and Back? | ProDesignTools
It has important information.
Regards
Rajshree -
How to create a QuickTime Movie with expiration date?
I´m looking for a solution to protect QuickTime files with a pwd that one have to enter after a specific time. Is it possible?
Thanks for your help
BjoernI´m looking for a solution to protect QuickTime files with a pwd that one have to enter after a specific time. Is it possible?
No.
(52272)
Maybe you are looking for
-
Unable to unzip oralce 11g files in windows(32 bit) xp sp2
Database Installation i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too... WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPE
-
Dear All When i try to create a query for the BSAS table, i get error BSAS-PRODPER not defined in ABAP dictionary BSAS-PROPMANO not defined in ABAP dictionary. Document 1500000000 was posted in company code 1000 lease help me resolve this issue. rega
-
Seems like previous versions of LR (2. and lower) would display the total numer of photos in the the entire file structure beneath the file highlighted. LR 3.0 and up appears to only display the number of photos in the highest level of the file stru
-
No option to "Put Back" files that were trashed?
In Snow Leopard, I thought we were giving the feature of right clicking a file and choosing "put back" to put the file back where it was before being trashed. However, I don't have this option. I am running 10.6.1 Example:
-
How to check dpi in adobe acrobat
Hi, Can u please guide the way of checking DIP setting in PDF file Thanks, Keyur