Creating "A" record in Cisco 1841

Hello All,
We are using Cisco 1841 router. Our requirement is to configure "A" record in the router i.e. we wanted this router to act as a Primary DNS server.
I can bit explain the scenario.
We have connected Internet Lease line ILL to this router with a static ip assigned to it. We have a domain name registered say e.g. www.xyz.com at www.namecheap.com. We wanted to host the web server inside our office network for our website. We did the necessary changes at www.namecheap.com to the domain www.xyz.com pointing it to our static ip. But we are not able to ping or browse the domain www.xyz.com and we contacted www.namecheap.com technical support and they informed us that we need to create a "A" record where ever the web server is hosted.
I tried to search the internet and i couldn't able to find the necessary online resources for creating "A" record in the router for the domain name. But i could find the below link for creating soa record http://blog.ipspace.net/2006/09/use-your-cisco-router-as-primary-dns.html and created a namesever entries like ns1.xyz.com
But this doesn't create "A" record
Any assistance would be really helpful.
Thanks
Sundar

Dear Daniele,
Thanks for your reply.
You solution worked great for me.
We are able to ping the domain name.
Now we are facing another problem in reaching our web server. I will explain it below.
1. When i type the domain name in the browser we are getting a authentication popup asking for username & password, the popup says "a username and password are being requested by says level_15_access ..."
2. I provided the router username & password it redirect to the following link http://www.sitename.com/archive/flash:home/html/home_aux.shtml. and load the SDM (Cisco router and security device manager) page.
NOTE: we have installed Cisco SDM.
What i wanted is, the site should reach our website hosted in our IIS server inside the network. The IIS server has an local IP address 192.168.1.x and the router gateway has a IP address 192.168.1.y
Any assistance would be really helpful.
Thanks
Sundar

Similar Messages

Cannot establish multiple simultaneous PPTP connections with the CISCO 1841.

Hello everyone;
I have recently tested a PPTP connection with a CISCO 1841 router and got success. I have configured a windows 7 client and successfully connected to the router and was able to access the documents in the server PC that I have mentioned in the attached diagram. I have created number of different users  in the CISCO 1841 too. While some one is having a connection, another user cannot connect to it, which means multiple simultaneous connections aren't possible. Do I have to create a ACL for the PPTP and if yes, How ?
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.100.1/25
Broadcast address is 255.255.255.255
Address determined by non-volatile memory
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is 100
Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP CEF switching is enabled
IP CEF Feature Fast switching turbo vector
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Policy routing is disabled
Network address translation is enabled, interface in domain inside
BGP Policy Mapping is disabled
WCCP Redirect outbound is disabled
WCCP Redirect inbound is disabled
WCCP Redirect exclude is disabled
Inbound inspection rule is SDM_LOW
--------------------------------------------------------------------------------------------ACL 100-----------------------------
deny icmp any any echo-reply
deny ip host 255.255.255.255 any
deny ip 127.0.0.0 0.255.255.255 any
deny ip host 66.163.169.186 any
permit ip any any (122467027 matches)

As long as you have the inspection engine enabled on the ASA, it shouldn't freak out of the different IP as it will inspect the call signalling and will NAT it accordingly, BUT, for simplicity, I agree with you, it would cause a lot of troubleshooting headache if there is problem as well as reconfiguration of IP on the host ends.
Here is the NAT FYI:
object network obj-10.10.96.0
   subnet 10.10.96.0 255.255.255.0
object network obj-192.168.96.0
   subnet 192.168.96.0 255.255.255.0
object network obj-10.10.14.0
   subnet 10.10.14.0 255.255.255.0
object network obj-10.1.0.0
   subnet 10.1.0.0 255.255.255.0
object network obj-192.168.1.0
   subnet 192.168.1.0 255.255.255.0
object network obj-10.10.11.0
   subnet 10.10.11.0 255.255.255.0
object network obj-192.168.11.0
   subnet 192.168.11.0 255.255.255.0
nat (inside,outside) source static obj-10.10.96.0 obj-192.168.96.0 destination static obj-10.10.14.0 obj-10.10.14.0
nat (inside,outside) source static obj-10.1.0.0 obj-192.168.1.0 destination static obj-10.10.14.0 obj-10.10.14.0
nat (inside,outside) source static obj-10.10.11.0 obj-192.168.11.0 destination static obj-10.10.14.0 obj-10.10.14.0

Connection issue between Cisco 515 Pix and Cisco 1841 router

Hi,
I am having a problem getting a Cisco Pix 515 communicating to a Cisco 1841. I am currently studying for CCNA so forgive me if it's obvious to the rest of you where the problem lies.
The client currently has an ISDN service which is being moved over to a 2MB E1 connection.
I have configured the 1841 router with G.703 WIC according to the information given to me by the ISP. I have configured the 1841 to have the same internal IP as the ISDN Cisco 800 series router, hoping for a simple swap over. The Pix 515 sits behind the ISDN at present and will be behind the 1841 when it is active.
Once I unplug the 800 series ISDN router and plug the 1841 into the pix, I cannot get any response what so ever. I have tried changing the ethernet connection speeds between the pix and 1841 hoping it would be as simple as that without success. Can't get ping responses from either end but I can when the ISDN service is plugged in. Both ISDN and E1 link are supplied by the same ISP, Telstra Australia and the fixed IP's are able to move over to the E1 service.
I have not touched the pix in any way. A seperate company configured the router a couple of years ago.
I have included the configurations of the existing ISDN, Pix and the 1841 for you to review. Any advise/solutions would be greatly appreciated.
Thanks in Advance,

Hi,
The outside interface on your PIX is configured as 10BaseT which would be fine when using the original 800 series ISDN router.
Now with your new 1841, the interface that the PIX connects to is Fast Ethernet so you need to change your outside interface on the PIX to the same
If you want to use auto negotiation between the PIX and router then the command to do this on the PIX is
interface ethernet0 auto
I recommend using hard coded settings between the PIX and router and the command to do this on this PIX is
interface ethernet0 100full
You will also need to change your router as:
interface FastEthernet0/0
speed 100
duplex full
If you can't configure the PIX as you mentioned an external company did it, then i guess you could change your Fast Ethernet interface to "speed 10", "duplex half".
This won't create a bottleneck as you only have a 2 MB connection to your ISP
Everything else looks good, don't worry about asking questions on the forum, this is what its for.
HTH
Paddy

Getting "java.lang.NullPointerException" error message when trying to run an OATS OpenScript file from Eclipse to Create a record in Oracle EBS

Hello,
I'm trying to run a simple OpenScript script in Eclipse that creates a record (a Supplier in this case) in Oracle E-Business Suite. So I copied the the script file from OpenScript and created it as a Class in Eclipse. Then I created a main class to call the methods within the script class but no matter what method I call (initialize, run or finalize) I'm getting the java.lang.NullPointerException message. The error doesn't seem to be related with any specific line in the script but with the way that I'm calling it.
Should I call the OpenScript class from my main class in a different way? (see my examples below)
BTW, all external .jar files coming with OATS have been added to my project in Eclipse.
1) Here's the main class I created to call the OpenScript method (Eclipse auto-corrected my main class adding a Try and Catch around the method call):
public class Test {
    public static void main(String[] args) {
        nvscript nvs = new nvscript();
        try {
            nvs.initialize();
        } catch (Exception e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
2) Here's the script from OpenScript (the actual script has more steps but I'm just using the first one for a proof of concept):
import oracle.oats.scripting.modules.basic.api.*;
import oracle.oats.scripting.modules.browser.api.*;
import oracle.oats.scripting.modules.functionalTest.api.*;
import oracle.oats.scripting.modules.utilities.api.*;
import oracle.oats.scripting.modules.utilities.api.sql.*;
import oracle.oats.scripting.modules.utilities.api.xml.*;
import oracle.oats.scripting.modules.utilities.api.file.*;
import oracle.oats.scripting.modules.webdom.api.*;
import oracle.oats.scripting.modules.formsFT.api.*;
import oracle.oats.scripting.modules.applet.api.*;
public class nvscript extends IteratingVUserScript {
    @ScriptService oracle.oats.scripting.modules.utilities.api.UtilitiesService utilities;
    @ScriptService oracle.oats.scripting.modules.browser.api.BrowserService browser;
    @ScriptService oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService ft;
    @ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
    @ScriptService oracle.oats.scripting.modules.applet.api.AppletService applet;
    @ScriptService oracle.oats.scripting.modules.formsFT.api.FormsService forms;
    public void initialize() throws Exception {
        this.getSettings().set("formsft.useformsonly",true);
        browser.launch();
    public void run() throws Exception {
        beginStep(
                "[1] E-Business Suite Home Page Redirect (/ebs12cloud.winshuttle.com:8000/)",
                0);
            web.window(2, "/web:window[@index='0' or @title='about:blank']")
                    .navigate("http://ebs12.xxxxxxx.com:8000/");
            web.window(4, "/web:window[@index='0' or @title='Login']")
                    .waitForPage(null);
                think(4.969);
            web.textBox(
                    7,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_text[@id='usernameField' or @name='usernameField' or @index='0']")
                    .setText("winshuttle_user");
                think(2.0);
            web.textBox(
                    8,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
                    .click();
                think(1.109);
            web.textBox(
                    9,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
                    .setPassword(deobfuscate("kjhkjhkj=="));
                think(1.516);
            web.button(
                    10,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:button[@id='SubmitButton' or @value='Login' or @index='0']")
                    .click();
        endStep();
    public void finish() throws Exception {
3) Here's the error messages I'm getting based on the method I call from my main class:
3.a) when calling Initialize():
java.lang.NullPointerException
    at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getSettings(IteratingVUserScript.java:723)
    at nvscript.initialize(nvscript.java:22)
    at Test.main(Test.java:9)
3 b) when calling Run():
java.lang.NullPointerException
    at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.beginStep(IteratingVUserScript.java:260)
    at nvscript.run(nvscript.java:30)
    at Test.main(Test.java:9)
Any help and/or constructive comment will be appreciated it.
Thanks.
Federico.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How can i create a record with a qualified or a hierarchy look up field

if have the api to create a this record by one time or must to create lookup then create main record???

Hi,
The process is to first populate the values in the lookup(can be a part of main table or qualified table) and hierarchy tables. Once done, create the main table record and then fill the details in the qualified table for that particular main table record. Since the details of the qualified table are stored in the link established between main table record and qualified table record hence you cannot first create a qualified table record before creating main table record.
Also when you first create a main table record containing set of lookup & hierarchy fields then you wont find the values in the drop down since you have not filled the lookup tables, hence we always fill the lookup table data first.
Regards,
Jitesh Talreja

How to create Child record at the time of master record creation.

Hi,
I have MasterVO and ChildVO. And association between both are 1 to *. I have a requirement like, I need to create row in ChildVO at the time of MasterVO row creation.
I have used entity based association to create view link. This view link created ChildVO accessor in MasterRowImpl as type RowIterator.
Actually my idea is to override create method in MasterVORowImpl and call ChildVO ViewObject and call .createRow() method on it. But I don't have access to ViewObject, instead it gave access to RowIterator.
Could you please provide any pointer to achieve above functionality?
Many thanks in advance.
Jdev version - 11.1.1.7.0
Regards,
Dileep.

Hi Tim,
Now it is creating child record at the time of master row creation. But it is working only through BC tester. But when I drag the child VO instance in the jsff page, only master is get created as editable only, child is displayed as read only without populating any default values like child VO surrogate key and other default attributes. But through BC tester it is working fine.
Am I missing anything here while implementing in UI?
Thanks,
Dileep.

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

Error while creating condition record

Hi
Am using 4.7 and creating condition record while saving condition record am getting error NO UPDATE SERVER FOUND FOR CONTEXT E, So am stuck up and do not know whom to contact is it error for BASIS? or related with SD kindly help.
Thanx

Hi Mukesh
As you are getting error NO UPDATE SERVER FOUND FOR CONTEXT E, while saving the condition record, kindly consult your BASIS consultants and ask them to check wheather the pricing related tables and structures have been copied and uploaded properly or not.
Regards
Srinath

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Dynamically creating a Record Group based on Previously entered Record Grou

Forms [32 Bit] Version 10.1.2.3.0 (Production)
Hi,
I know how to dynamically create a record group based on a query and putting the code in When new form instance.
My query is. I have a form which has multiple Record Groups and the user wants to dynamically create subsequent groups based on previous groups.
For example
I have a record group with selects a Location,
when the user selects the Location from a list of values
the 2nd record group called 'Cost Centres' will have to filter out only those with the locations selected above.
How can I populate the 2nd record group at run-time when I do not know what site the user will select?
If I simply populate in when new form instance as in location and just select everything, the list of values populates.
CC field is a LIST ITEM and the list style is a POP LIST, it is not required.
I have put the code in the Location field in the when-list-changed trigger.
I am getting this error:
frm-41337: cannot populate the list from the record group
here is the code:
DECLARE
v_recsql Varchar2(1000); -- The SQL for creating the Record Group.
v_recgrp RecordGroup; -- Record Group
v_status Number; -- Return Value of Populate_Group function.
c_where VARCHAR2(1000);
BEGIN
     IF :location = '1' THEN
          c_where := ' substr(cost_centre,1,2) in (''01'',''02'')';
     ELSIF :location = '2' THEN
          c_where := ' substr(cost_centre,1,2) in (''02'',''03'')';
     ELSIF :location   = '3' THEN
          c_where := ' substr(cost_centre,1,2) in (''01'',''11'',''07'')';
               ELSE
          c_where := ' 1=1'; --EVERYTHING
     END IF;
v_recsql := 'SELECT cost_centre, description FROM   cost_centres where '||c_where;
-- Create the Record Group
v_recgrp := CREATE_GROUP_FROM_QUERY('v_recgrp', v_recsql);
IF NOT ID_NULL(v_recgrp)
THEN -- No Error, record group has been successfully created.
-- Populate Record Group
v_status := POPULATE_GROUP('v_recgrp');
IF v_status = 0
THEN -- No Error. Record Group has been Populated.
POPULATE_LIST('block.CC', 'v_recgrp');
END IF; -- IF v_status = 0
-- Delete the Record Group as it is no longer needed.
DELETE_GROUP('v_recgrp');
END IF; -- IF NOT ID_NULL(v_recgrp)
END;thanks for your assistance.

Hi,
Once record status gets change for block you can not populate/repopulate the list item. Keep those list items as non-database item with different names and create different items as database orignal items. Than assign the values in WHEN-LIST-CHANGE trigger to the actual database items.
-Ammad

Issue while Creating the records in OAF by disabling one field.

Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.

or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna

How create a record type and a pl/sql table of that record type in database

Hi
I want to create a record type and then I want to create a PL/SQL table in the oracle 9i database.
I have done it in PL/SQL block.
But when I am trying to do it in database it is throwing me some error.
Could you please tell me how can I do that?
Regards

user576726 wrote:
Hi
I want to create a record type and then I want to create a PL/SQL table in the oracle 9i database.
I have done it in PL/SQL block.
But when I am trying to do it in database it is throwing me some error.
Could you please tell me how can I do that?
RegardsRECORD type is supported only in PL/SQL for SQL you need to use OBJECT type.

Data loader : Import -- creating duplicate records ?

Hi all,
does anyone have also encountered the behaviour with Oracle Data Loader that duplicate records are created (also if i set the option: duplicatecheckoption=externalid) When i am checking the "import request queue - view" the request parameters of the job looks fine! ->
Duplicate Checking Method == External Unique ID
Action Taken if Duplicate Found == Overwrite Existing Records
but data loader have created new records where the "External Unique ID" is already existent..
Very strange is that when i create the import manually (by using Import Wizard) exactly the same import does work correct! Here the duplicate checking method works correct and the record is updated....
I know the data loader has 2 methods, one for update and the other for import, however i do not expect that the import creates duplicates if the record is already existing, rather doing nothing!
Anyone else experiencing the same ?? I hope that this is not expected behaviour!! - by the way method - "Update" works fine.
thanks in advance, Juergen
Edited by: 791265 on 27.08.2010 07:25
Edited by: 791265 on 27.08.2010 07:26

Sorry to hear about your duplicate records, Juergen. Hopefully you performed a small test load first, before a full load, which is a best practice for data import that we recommend in our documentation and courses.
Sorry also to inform you that this is expected behavior --- Data Loader does not check for duplicates when inserting (aka importing). It only checks for duplicates when updating (aka overwriting). This is extensively documented in the Data Loader User Guide, the Data Loader FAQ, and in the Data Import Options Overview document.
You should review all documentation on Oracle Data Loader On Demand before using it.
These resources (and a recommended learning path for Data Loader) can all be found on the Data Import Resources page of the Training and Support Center. At the top right of the CRM On Demand application, click Training and Support, and search for "*data import resources*". This should bring you to the page.
Pete

Creating new records while querying existing record

Hi,
I have one master - detail form.
First i created 1 record. Request ID is the primary key. Now request id generated. For ex.: 10
Request Id, date, requestor , location, status fields are in header block.
In lines block, i hv some other fields.. and one field called 'Activity'.
While creating first record, the activity will be 'New'.
Then i'll query the record '10'.
when i'm changing the activity 'New' into 'Upgrade', it should create new record with new request ID.
How to do this?
I hv written procedure that, i'm taking field values to local variables. Then assigning the local variable values to field values.
It is not creating as new record. It overwriting the existing record with new values. Existing record is missing.
Pl. give steps.
Thanks
Kavi

Hi,
Okk, you will have to do two things. Create two trigger on block level on which you want to do your changes.
1. First trigger. (PRE-UPDATE)
In pre-update trigger u will have to write the complete insert statement into the same table with new req id. like
DECLARE
vReqNo DATA_TYPE;
BEGIN
SELECT MAX(REQ_ID)
INTO vReqNo
FROM your_table;
INSERT INTO your_table
(req_no, fields....)
VALUES
(vReqNo, :forms_values);
END;
2. Create 2nd trigger on block level (ON-UPDATE)
write in this trigger
NULL;
for viewing the inserted record. What u have to do is in ON-UPDATE after null; create one timer NO_REAPEAT.
and in timer u will have to set the block property to req_id = generated_req_id_from_pre_update_trigger and
execute_query;
hope it will work...
-Ammad

Creating "A" record in Cisco 1841

Similar Messages

Maybe you are looking for