Creating a Sampler bassline that can be triggered by one key?

Hi all
I've just found the video on the Apple website that shows you how to convert, say, a beat to a sampler instrument using transient markers. A Sampler instrument is created with ascending MIDI notes that can then be altered.
I would like to do a similar thing, but put each chopped up bit of what would be a bassline on the same note. I have an electric drumkit, and I would like to be able to trigger the bassline using one of my drum pads. When I hit the pad, I would like the Sampler instrument to advance to the next note in the bassline, so I can essentially play a bassline whilst drumming.
Any ideas on how I could do this?
Cheers
Jonny

jonathan.townend wrote:
I have an electric drumkit, and I would like to be able to trigger the bassline using one of my drum pads. When I hit the pad, I would like the Sampler instrument to advance to the next note in the bassline, so I can essentially play a bassline whilst drumming.
Hi,
Sorry for the latency... I just created the Environment tool you need.
It is some kind of step sequencer Macro tool, where you can assign the Drumset triggering note and the LO/HI range target notes. The Macro sequencer steps are determined by the LO/HI range notes.
Here are the Macro Elements short description:
1. Trig.Note box - here you set you drum pad triggering note.
2. *Out Ch.* box - here you set the output midi channel for the bassline software instrument. It is supposed that you use two software instrument instances (one for drums and one for the bassline).
Example: If you switch Logic to "Live Play Mode" from the Settings>Recording>"Autodemix by midi channel if multitrack recording", then you can assign your original input Drumset to say EXS midi ch.1 Instrument and the Bassline newly converted instrument to EXS midi ch2... In this scenario assign the "Trig Note Out.Ch" (2) to midi ch.2 so the "Trig.Note" drum pad will operate as a keyswitcher and recall the midi Key Range Notes of the bass line channel ( i.e instrument ).
3. *LO Key Range* box - here you set the low key range of the Bassline Instrument.
4. *HI Key Range* box - here you set the high key range of the Bassline Instrument.
5. *Reset Button* - use it to reset the Step sequencer to the "First/LO" key range note.
6. *Play Triggering Note Button* - switch it ON if want to play/add the original drum triggering drum pad keyswitcher note. Cause it is a keyswitcher by default this button is set to "OFF"! The Trigg. Note is added to its Input Midi channel i.e to the Drum patch software instrument !
*Note to Keyrange Triggering Tool v1.0* - [DOWNLOAD|http://audiogrocery.com/files/notekeyrange_triggv1.0.zip]
!http://img7.imageshack.us/img7/783/noteregtrig.gif!
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Similar Messages

  • I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). It should be done in the S domain.The user should be allowed to put poles and zeroes, with frequency

    I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). The user should be allowed to put poles and zeroes, with frequency. DONE IN S DOMAIN.

    I have created a VI (LabVIEW 6.1) that does what you want. Note that the poles and zeros have to be entered correctly that is in Rad/s and typically with negative real part. The VI offers you all options for lin/log frequency axis, magnitude in dB or not, phase in Radians or Degrees etc...
    The VI is written with "academic" in mind, so it is not optimized for performances but (hopefully) for clarity. I hope this will work for you.
    Attachments:
    S-Domain_Transfer_Function_from_Poles-Zeros.vi ‏167 KB

  • How do i create an itunes account that can only download free apps

    how do i create an itunes account that can only download free apps

    Follow the instructions here > Create an iTunes App Store account without a credit card

  • Is there a way to create standard text messages that can be reused easily

    is there a way to create standard text messages that can be reused easily

    if you meant phrases, then Yes
    Setteings> general>keyboard> add new shortcut

  • Can I create a PDF document that can be commented on by others using READER

    I have dozens (hundreds?) of PDF Books that I've purchased. Whoever created them made them so anyone using Adobe Reader 5 or better can make highlights and comments on the text.  I use the feature to correct typos and send them back to the publisher. I know it can be done because I've been doing it for a few years before I ever got Adobe Standard.
    So . . . My question is . . . How can I create documents like this that can be commented on using Adobe Reader? I have Adobe Standard 8 and I don't see this as a separate feature of Adobe Pro. and I'm hoping that I'm just missing the instructions on how it's done. I do not have any problem doing what I want using Adobe Standard 8 but I need to be able to make it doable in Reader so others can make comments in my documents.
    Thanks for taking the time . . .
    thehapster

    "Enable Usage Rights in Adobe Reader" or "Extend Features in Adobe Reader"
    are available with Acrobat 8 Professional / 3D version 8 or Acrobat Professional / Pro Extended respectively.
    Additionally, Adobe provides a server based service (LiveCycle ES) that "enables/extends" a PDF such that Adobe Reader can  be used for Comment, Review, Digital Signature, etc.
    That you can use Adobe Reader to comment on PDFs means one of the above applications were used.
    Because you have mentioned the PDFs are purchased PDF Books I suspect that LiveCycle ES was used.
    This server based application (which has a myriad of "modules" available) is expensive so, typically, it is licensed by enterprises that need its functionality. Examples: the large publishing houses or governmental agencies (e.g., IRS).
    If you move up to Acrobat Professional you will be able to "Extend Features in Adobe Reader" such that others can perform Comment & Review on your PDF documents.
    As Acrobat 9.x is the current, marketed release the Professional version would be available to you via an upgrade (not to be confused with the free "updates").
    Be well...

  • How to create an OS command that can be used in the process chains

    I need to create a command that can copy files from one location to another for a unix machine.
    I have the commands for the unix machine, but need to create a Z customer command so it can be executed in a process chain in SAP

    Hi Again,
    You can use ABAP program in the process chain.
    I guess there are some OS level commands in ABAP which will allow you to open, close, read , write and move files.
    Serach in ABAP help or on net.
    Bes regards,
    Sunmit.

  • I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
    If that solution is not flexible enough, consider using the very affordable (12$)  Elements+ add-on which offers a 'meta stamp' script :
    http://elementsplus.net/v5/en/meta-stamp.htm
    Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

  • Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached an email back to the sender and a preset admin password would open it

    Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached to an email back to the sender and a preset admin password would open it?

    Hello Graphicsguy123,
    You would need to first create the form ( or Widget in EchoSign) first to generate a url which you can paste it in the email being sent to customers. You would need to make sure you have a Document Cloud Enterprise Premium account in order to create a Widget. If you don't have the account, you can use the trial version to test it. Here is the link:
    Global Trial Registration | eSign services from Adobe
    -Rijul

  • With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

    with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

    Hey Paul,
    Please let me know what version of Acrobat Standard are you using.
    Regards,
    Anubha

  • Create a user that can only access to one schema - please help!!

    Hi all,
    I want to create one user in a Oracle DB that can only access to one schema. I did the following:
    CREATE USER "TEST" PROFILE "DEFAULT"
    IDENTIFIED BY "test" DEFAULT TABLESPACE "USERS"
    TEMPORARY TABLESPACE "TEMP"
    ACCOUNT UNLOCK;
    GRANT SELECT ON "TESTDTA"."F0007" TO "TEST"
    GRANT "CONNECT" TO "TEST";
    I have done a test and the user TEST can access all schemas, when I only gave explicit permissions to the schema TESTDTA.
    Any suggestion/clarification???
    Many thanks in advance.
    Víctor.

    Hello Andreas and Pavan,
    I have launched the query:
    select * from dba_tab_privs
    where grantee = 'PUBLIC'
    and owner = 'PRODDTA'
    and table_name= 'F0009';
    And the result:
    GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE GRA HIE
    PUBLIC PRODDTA F0009 PRODDTA ALTER NO NO
    PUBLIC PRODDTA F0009 PRODDTA DELETE NO NO
    PUBLIC PRODDTA F0009 PRODDTA INDEX NO NO
    PUBLIC PRODDTA F0009 PRODDTA INSERT NO NO
    PUBLIC PRODDTA F0009 PRODDTA SELECT NO NO
    PUBLIC PRODDTA F0009 PRODDTA UPDATE NO NO
    PUBLIC PRODDTA F0009 PRODDTA REFERENCES NO NO
    PUBLIC PRODDTA F0009 PRODDTA ON COMMIT REFRESH NO NO
    PUBLIC PRODDTA F0009 PRODDTA QUERY REWRITE NO NO
    PUBLIC PRODDTA F0009 PRODDTA DEBUG NO NO
    PUBLIC PRODDTA F0009 PRODDTA FLASHBACK NO NO
    11 rows selected.
    Then I supose that I have to change the value on column GARANTEE. How can I do that?
    Thanks a lot for your help!!
    Víctor.

  • I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles)

    I need a sample vi that can plot a transfer function given zeroes and poles (It should allow the user to input zeroes and poles). The user should be allowed to put poles and zeroes, with frequency.

    Check the answer to your other posting
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000052A90000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0

  • SMARTFORM: how to create 3 copy (each copy can print more than one page)

    SMARTFORM: how to create 3 copy (each copy can print more than one page)
    Hello everyone.
    my user want to have form that print 3 copy.
    such as 1 copy description = master,  2 copy description = copy 1 ,3 copy description = copy 2.
    so i create 3 page . I copy from page 1.
    and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
    please help me.
    how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

    Hello Vinit.
    thank you very much for your help.
    could you help me more please.
    in below code
      DO NAST_ANZAL TIMES.
    l_counter = l_counter + 1.  " << pass this to FM and use for the TEXT to print
    CALL FUNCTION LF_FM_NAME
               EXPORTING
                         COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
    enddo.
    Now i out of office .so i cannot test.
    where do i set NAST_ANZAL for 3 ?
    can i input ?
    NAST_ANZAL = 3.
      DO NAST_ANZAL TIMES.
    l_counter = l_counter + 1.  " << pass this to FM and use for the TEXT to print
    CALL FUNCTION LF_FM_NAME
               EXPORTING
                         COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
    enddo.
    Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

  • Maximum file size that can be ulpoaded at one time

    Hi All,
    I have an issue in which user is uploading 200 MB file in to KM. But she is getting "IisProxy.dll: 502 Bad Gateway" error.
    I have tried uploading a document and was successfull in uploading 93 MB document and while uploading above this (93MB) i was getting Page cannot be found error.
    I have found in refrences of same as in SAP note 820028 and on
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
    Please advice  me what shoud be the maximum file size that can be uploaded at one time.
    Thanks in advance.
    Honey

    Hi,
    By default the maximum file size is 128 MB. You can configure that in visual administrator.
    http://help.sap.com/saphelp_nw04/helpdata/en/05/35e13d8ee48f5ee10000000a114084/frameset.htm
    If you as administrator need to upload a file with larger size, you can use km file repository like etc. and can upload file from OS.
    Regards
    Baby

  • How can you create a button master that can be unlocked but where edits to the master will affect all buttons?

    I'm creating a course calendar (January - December) for an organization and courses are repeated several times throughout the year. I've been asked to create this as an interactive pdf rather than as an interactive Indesign document that can be viewed via a browser, so I'm unable to use multi-state objects
    Anyway, I've created button masters for such buttons such as previous page/next page, course index and search on my master pages, so that's all fine and dandy as I don't need to move these elements. The way I have set up the calendar is that you click on the course name (a button) and a popup (also a button) shows up with a course description - I want to be able to move these popups so that they are the general vicinity of the course name button and not just floating about in the centre of the calendar.
    However, because course descriptions or what is offered in the course change frequently and I am expected to keep the calendar up to date, it doesn't seem efficient to have to manually change every description for a course popup that shows up several times throughout the year or even several times on a month. The issue is that even if I create the popups on the master page, as soon as I unlock them on my month pages and move them to where I want them to be...they'll no longer be affected by changes to the master.
    Is there some sort of function like in html/CSS where you can assign a class to a button or something? Or it is something that Indesign isn't capable of and I will just have to do it manually and try to be careful not to miss any courses when they are updated?
    Any help is appreciated!

    While you could create a different screen for each, a better way to do this is via some form of database.  The buttons cause functions to be executed and the functions utilize data resources based on the selections that are established.
    So if you pick a particular character, a variable is a assigned a value that indicates that.  That variable is then utilized to extract the data associated with the character and to build the screen elements related to the options for that character.

  • Create a PDF file that can be opened in PS

    Hello,
    I a cartographer that is creating a map with thousands of contour lines (among many other layers) in .ai.  Unfortunately, I can't open this map in PS.  PS will think for upwards of 10 hours trying to rasterize this file (and at that point it was about 1/100th converted).  If I turn the contour layer off, PS can open/rasterize the file in a matter of minutes.
    My goal is to open this .ai file in PS and then save it as a .tiff for printing. Does anyone know how to go about doing this?  FYI, I have opened this file in InD and exported it as a PDF, but PS can't open it either.
    Thanks,
    kru

    Hello Larry,
    I have an information plug-in that gets a little more specific.  In all I have 850,000 verticies (2 points and a connecting line segment) which equates to about 5,250 paths.  I can't simplify too much, however, I have simplified the paths 5 x at 99%.  If I try to simplify at just 95% my contour lines will not line up with my streams and valleys.
    Do you know the maximum amount of verticies that can be handled?
    Thanks,
    kru

Maybe you are looking for