Creating a scenario

Hello all,
I want to set up the following situation in SAP.
There are several businesses  - each with no more than 30 employees.
Each of these employees must be tracked (HR). Time information would be collected for each employee.
The thought was to go to OM, create an organization for each business. Underneath each organization there would be list of employees (again no more than 30).
The idea was to track the actions of the busines itself in FI (with account numbers).
Can SAP suport this?
TIA
Edited by: Casey Harris on Dec 26, 2008 6:09 PM

HI Harris,
Its right to create different Organization but you have to map your Enterprise Structure and personnel structure. For  tracking  the actions of the busines itself in FI  you have to map the cost centers and controlling areas.If you are implemention the payroll Symbolic account mapping to the GL account is required to have a proper matching of wage types to their GL account according to their nature.
Regards,
Kapil Kaushal

Similar Messages

  • Steps to create a Scenario in XI.

    Hi All,
    Can someone send me Step by step procedure to create a Scenario in XI. What all steps are involved in Repository and Directory.
    Thanks,
    Shridhar.

    Hi,
    Here is some of scenarios link, hope this will help.
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    Thanks,
    Prateek

  • How to create a scenarios for duplicate entries

    Hi friends,
    Please help me how to create a scenarios for duplicate entries, we are using stock transfer orders from there we need to create scenarios for duplicate entries, please guide me on the same.

    Hi,
    F-01 can be used to create a sample document.
    Regards
    Aditya

  • Problem when creating configuration Scenario

    hi all
    when i Create configuration Scenario use sap XI then it warning that "Error initializing key service (COULD_NOT_GET_KEYSERVICE)" and "The log file for database 'N4S' is full. Back up the transaction  log for the database to free up some log space."
    is it means so many people to use the system?
    and how can i clear this problem?
    thanks!
    marx

    Hi
    User query below to backup and shrink the trasactional logs
    db_name in your case is "N4S"
    db_name_log is the trasctional log file name:Chek this in your case must be like N4S_log
    backup log db_name with truncate_only
    go
    dbcc shrinkfile (db_name_log,0)
    go
    run this query and restart the database
    Ps: If helful pleae reward points

  • Steps to create a Scenario for VC Demo purpose

    Hello Guru's,
    Will anyone guide me the steps by step procedure  to create a scenario on VC  in a system to show the client.  will guide me to create a simple scenario.  It will be of great help.
    Full points to the scenario steps.

    Is your question pertaining to Variant configuration
    If yes, please go through this link
    http://www.slideshare.net/arun_bala1/variant-configuration-overview/

  • Steps to create a Scenario for VC Demo purpose in a System

    Hello Guru's,
    Will anyone guide me the steps by step procedure  to create a scenario on VC  in a system to show the client.  will guide me to create a simple scenario.  It will be of great help.
    Full points to the scenario steps.

    Hi
    Can you please check the link below should help to a great extent.
    Thanks
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf

  • Creating Configration Scenario: Transfering Intergration Scenario from IR

    Hi ALL
    I was in the process of Creating Configruation Scenario by using the Option of transfer Integration Process from IR.
    However, I hit a roadblock at the following step:
    1. Assign Service: The application component in my intergation scenario needs to be assigned to a business service and I am unable to assign it to bussines service(without a party); as it only lists and allows Business Systems to be selected.
    Please, advive how I can assign a business service to my application component of Integration Scenario.
    Thank you,
    Ritu

    Hi Ritu,
    We can assign Business Systems only, because they reside in SLD.
    Business Service is scenario specific. You need to recreate it new environment e.g. dev,quality,prodn. After business service creation, you create communication channel under it.
    So if you want you use the Business Service then create the configuration scenario without using Integration Scenario.
    You can use a Business Service if you have Party Communication. Define party and add Business service to it and you can use it while transferring integration scenario from IR.Help Links..
    Integration Scenario
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0395154950DB00487743182702389990End?blog=/pub/wlg/3157
    Regards,
    Srinivas

  • Abap to mass create business scenarios, business process, and process steps

    HI,
    Really struggling to figure out how to mass create "folders" in the business blue print structure.      Periodically we will need to add in a new business scenario with everythign associated with it.  the business has already written up all the information in excel sheets and we would like to avoid having to manually enter this data every time..   These scenarios and process etc are project specifc.
    Has anyone done this before? I have been playing with SOLAR_STRUCTURE_CREATE and while i can see the lines being added into table, i can't get anything to appear after wards in SOLAR01.
    Any and all help greatly appreciated
    Sara

    Hello.
    I was searching how to use the program RS_SOLAR_IMPORT_STRUCTURE for mass create business scenarios in Solar01.
    I saw you was in the forums about this. Do you got to do?
    Can give me this development?
    Thank you for your help.

  • Create Integration Scenario - Step by Step

    Hi All,
    Can anyone guide me the step by step procedure for creating integration scenario in IR. Thanks
    Deno

    Hi Deno,
        I think you have got enough idea hw to create a Integration scenaion in the IR itself..any way let me explain my self point ways so you might get atleats one point would give you more advantage.
       First you have to finish the Data types,Message Types,Message Interface and Message Mapping and Interface Mapping after you done with all the above things you will be starting of the below steps for start creating the IntegarationScenario.
    1) Click on Integration Scenarios & Integaraton Process in your name space and you will be able to see the three objects..among three select the actions and right click and select new.So enter your action name,here one imoportant point is you need to select two actions one is for sender actiona and another one is receiver action.
    2)Give name to the sender action
      For sender:select the outbound interface and select the object type as Message Interface if it is the idoc select the idoc correspondingly,and select the Message Interface for the corresponding sender action (outbound) and same do the for the  receiver action also whre you need to select the Inbound interface.
    3) After you done with your actions go to the Integration Scenationand and give name to your Integation Scenation,you will be able to see the one white screen and place the cursor over the white screen and right click and select the Insert Aoppplication Component and select your sender action,select the product  and give name for the role and save it...the process is for sender action and also do the same for the receiver action.
    4) After you done with both sender actiona and receiver actions save it and activate.
    5)once you activated your integration scenatio go to ID and select the  Tools drop down list and select teh Transfer Integration Scenatio from IR and select the your Integration Scenatio which you have created and click and finish after you done this you will be abel to see your integation scenario in you ID.
    Please feel free to ask any doubts when you are doing the same above..
    I will be waiting for your queries..
    Thanks in Advance.
    Chandu

  • Can we able to create a scenario in XI like, RFC to JDBC

    Hello,
    I want to know whether  there is any way to create a scenarion like RFC to JDBC.
    RFC sends a rfc call with some parameters on sender side.
    JDBC stores the data in the receiver side.
    Thanks ,
    Prakash

    Hi Prakash,
    Step-by-step RFC to JDBC scenario:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step%2bby%2bstep%2brfc%2bto%2bjdbc%2bscenario
    XI: How-to on JDBC receiver response:
    /people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
    -Pinkle

  • How to create a scenario using RFCsender adapter

    Hi,
    I'd like to create an RFC to RFC scenario. Just for a test. I can use receiver RFC adapter, but I don't know, how the sender one works. I even can't understand how to call it. Using the receiver side - I import RFC's metadata and call the FM. No problem with this. But what about the sender side? Should I create an empty FM, and int's importing parameters will be my Outbound interface, and exporting parameters my inbound interface (in case of a sync scenario)? If yes, when I call this FM, how does it know, that it should not run the (empty body?) of the function, but send the request to XI using RFC connection?
    Thank you for clarification,
    Olian

    Hi,
    How to Trigger BAPI From R3 ToXI
    /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
    RFC Sender
    /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
    How to test the RFC to Flat File scenario
    Regards
    Seshagiri

  • Create Elster scenario inside Integration Builder

    Hello together
    I'm new in this forum and may ask the community if there is somewhere an e-learning guide to create the elster scenario inside Integration Builder of SAP-PI. SAP note 1279464 decribes creation of the elster scenario in chapter 4.) Integration Directory, but this is a bit of confusion for me.
    Thank you very much for your help in advance!
    Juerg Dreier

    Hi Juerg,
    From my knowledge, i didnt find any e-learning for Elster module till now. But you can get info in bits and pieces. Long back i was involved in creating SAP Elster module in PI, if you have specific queries then i could help you in this case.
    To put briefly:
    Elster module is like any other adapter module in PI which is provided by SAP for german tax filing. which involves RFC and SOAP adapter. let me know if you have specific queries.
    Thanks,
    RK

  • Nakisa Org Modeler: Unable to create a Scenario

    Hi all,
    i'm configuring Nakisa OrgModeler 4.1
    I have configured the Idoc receiver and i have done:
    - initial load
    - start check tables data extraction
    I'm not able to create a New scenario, when i click the buttons ("Default root", "Choose Root", "Empty Scenario" or "Custom") nothing happens.
    The db is SQL 2008
    Here attached the log file
    Any suggestion will be appreciated
    many thanks,
    Barbara

    Barbara.
    The cds.log suggests that some of the tables and columns do not exist in your database.  you could take a look using a SQL client for yourself at the following.
    Column ScenarioName in table Scenario.
    HRPAD31.
    HRP1008.
    HRP1011.
    HRP1013.
    HRP1014.
    HRP1018.
    HRP1028.
    If they aren't there or are malformed in some way then I'd suggest rolling the cds.log via the log manager in AdminConsole, and then running the activities Stephen listed previously.  Once complete, recheck the database and review the cds.log contents if there are still issues.
    Regards,
    Stephen.

  • Help Creating a "Scenario Clock"

    Hi!
    I'm not new to Java, but I am having a big issue trying to find a specific clock that I'm looking for. I want a clock that displays the current time (Including day, month, and year), but I want to be able to set the clock to a time and date of my choosing. I am able to create a clock that displays the current time, but nothing more. I'm sure I need to use the Calendar class, but I'm not sure how. Any help would be greatly appreciated.
    Also, for ease of adding this clock to my existing GUI, I would like the clock to display in a JTextField.

    1. Determine the long timestamp of the original setting (January 1, 1999 12:01:13 in your example) -- call it "original"
    2. Note the starting long timestamp (System.currentTimeMillis) -- call it "start"
    3. Start a javax.swing.Timer
    4. Whenever the timer goes off, get the current timestamp -- call it "now". Create a Date with original + (now - start). Format the date.

  • How to create a scenario in Oracle OLAP

    Hi,
    I am new to Oracle OLAP.
    I have a requirement where in we need two values 'Vs LY' and 'Vs Plan' which are scenarios to be placed in a dimension.
    According to the scenario selected measure values should change.
    For example:
    Vs LY and Vs Plan are values in scenario dimension and measure should have fomrula
    case when Scenario.Member='Vs Plan' then Sales - Planned Sales
    when  Scenario.Member='Vs LY' the Sales - LY Sales
    else
    Sales
    end
    Could you please let me know how to achieve this scenario dimension.
    Thanks

    Thank you all for your inputs.
    If we need to have Foriegn Key for scenario dimension in the measure we will have to duplicate the measure data for each scenario.
    If the number of scenarios increase the data increases in the fact table.
    Is there any way we can avoid this duplication.

Maybe you are looking for

  • Print insert result to a printer in TSQL trigger after insert - Need help.

    Hi, I am trying to print a record to a printer whenever a new record is inserted into a table called PrintTickets, using TSQL trigger for insert.  Is it possible to print a new inserted record to a printer? Here is the trigger tsql statement:  ALTER

  • Missing Firewire - for video output

    Am trying to run out a tape of a timeline, or else, run out via firewire to my standalone Sony DVD recorder. Confronting the "MISSING APPLE FIREWIRE 720 ...". Noticed a lot of posts concerning this. And yes, I have upgraded from 4.5 to 5.1. So I just

  • Org management (integration with SAP ECC 6) and shopping cart approval

    Background: We currently use EBP 3.0 - Classic Scenario. Our current Organisational plan was manually created in EBP, and is not the same as the HR hierarchy in SAP ECC 6 Shopping cart approvals use the workflow WS10000276 u2013 Approval Single Level

  • Lock a Report layout

    Hi, how can I lock a report layout (not a variant) so that user cannot modify ? Regards

  • Finally left BT... now what happens??

    Today I managed to get my Virginmedia services installed at my home. I now have an ultra speedy 50meg connection and am now more than happy. I have had my number ported to VM and now the BT phone line will not make calls (although i have a dial tone)