Creating a search help for a field in selection screen

Hi All,
There are 3 fields in the selection screen. They are
    WERKS
    DATE
    MATNR
Enter a value WERKS = 2465.
When I press the drop down menu for MATNR, it should only give the material number available for 2465.
I think, I should create a search help for it.
Kindly help me to create a search help for the material number based on the above condition.
Thanks in advance.

Hi
i am sending you a sample code where i had implemented a search help
for my req you can understand very easyly and write for ur req
<b>reward if usefull for ur req</b>
TYPES : BEGIN OF ST_OBJID_SH,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
        END OF ST_OBJID_SH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '
        RETFIELD               =  'OBJID'
             PVALKEY                = ' '
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0
             WINDOW_TITLE           =
             VALUE                  = ' '
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '
             DISPLAY                = ' '
             CALLBACK_PROGRAM       = ' '
             CALLBACK_FORM          = ' '
             MARK_TAB               =
           IMPORTING
             USER_RESET             =
      TABLES
        VALUE_TAB              =  IT_OBJID_SH
             FIELD_TAB              =
             RETURN_TAB             = RETURN_TAB
             DYNPFLD_MAPPING        =
           EXCEPTIONS
             PARAMETER_ERROR        = 1
             NO_VALUES_FOUND        = 2
             OTHERS                 = 3
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
  ENDIF.

Similar Messages

  • Search help for A field in select option which doesnt have search help in c

    u have table in QM which is QMFE in whihc field FECOD which doesnt have search help , but my requirement is that in select option in report to have users to see its search help, anyone there to help me

    Hi sridhar loganathan,
    For this goto SE11 and create a ZFECOD Search help for that field. In Defination Tab enter table name
    QMFE and Enter Z_F4_FECOD_EXIT in Search help Exit.
    Then create a FM in SE37 as Z_F4_FECOD_EXIT under a FG. And then write code as follows for example: 
    FUNCTION Z_F4_REG_EXIT.
    ""Local Interface:
    *"  TABLES
    *"      SHLP_TAB TYPE  SHLP_DESCR_TAB_T
    *"      RECORD_TAB STRUCTURE  SEAHLPRES
    *"  CHANGING
    *"     VALUE(SHLP) TYPE  SHLP_DESCR_T
    *"     VALUE(CALLCONTROL) LIKE  DDSHF4CTRL STRUCTURE  DDSHF4CTRL
      TYPES: begin of ty_code,
              dam_code type  QMFE-FECOD ,
            end of ty_code.
      DATA : tw_code type ty_code,
             ta_code type table of ty_code.
       IF  "callcontrol-step <> 'SELONE' AND
            callcontrol-step <> 'SELECT' AND
            callcontrol-step <> 'DISP'.
          EXIT.
        ENDIF.
       IF callcontrol-step = 'SELECT'.
          CALL FUNCTION 'F4UT_PARAMETER_ALLOCATE'
            EXPORTING
                 PARAMETER         = 'FECOD'
            TABLES
                 SHLP_TAB          = shlp_tab
                 RECORD_TAB        = record_tab
            CHANGING
                 SHLP              = shlp
                 CALLCONTROL       = callcontrol
            EXCEPTIONS
                 OTHERS            = 3.
       ENDIF.
       IF callcontrol-step = 'DISP'.
    Get the Region
          CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
             EXPORTING
                  PARAMETER         = 'FECOD'
                  FIELDNAME         = 'FECOD'
             TABLES
                  SHLP_TAB          = shlp_tab
                  RECORD_TAB        = record_tab
                  RESULTS_TAB       = ta_code
             CHANGING
                  SHLP              = shlp
                  CALLCONTROL       = callcontrol
             EXCEPTIONS
                  PARAMETER_UNKNOWN = 1
                  OTHERS            = 2.
           IF SY-SUBRC = 0.
              SORT TA_CODE BY DAM_CODE.
    Deleting duplicate damage codes in Internal Table ta_code
              DELETE ADJACENT DUPLICATES FROM TA_CODE COMPARING DAM_CODE.
    Passing changed Internal table to FM
              CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
              EXPORTING
                 PARAMETER         = 'REGION'
                 FIELDNAME         = 'REGION'
              TABLES
                 SHLP_TAB          = shlp_tab
                 RECORD_TAB        = record_tab
                 SOURCE_TAB        = ta_code
              CHANGING
                 SHLP              = shlp
                 CALLCONTROL       = callcontrol
              EXCEPTIONS
                 PARAMETER_UNKNOWN = 1
                 OTHERS            = 2.
           ENDIF.
       ENDIF.
    ENDFUNCTION.
    Revert me for any clarifications.
    Regards,
    Suneel G.

  • Search help for input fields in a screen

    Hi,
    Pls help me
    how to set search help property for the I/O fields in screen in se80?
    1. do we want to add any property for search help in the property window?
    2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
    PLS tell me how to set search for the I/O field in se80?pls tell me the process?
    i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
    can i create a single search for all these fields and use that for all the I/O fields ?
    elementary search help or collective search help?
    thanks & regards in advance,
    vsnl.

    Hi,
    Input Help on the Screen
    Within the Screen Painter, you can define two types of input help:
    1. The FIELD statement with one of the additions VALUES or SELECT.
    2. Linking a search help directly to a screen field.
    If you link a search help directly to a screen field, it overrides the additions of the FIELD
    statement. However, the input check [Page 581] functions of the FIELD statement remain
    unaffected.
    Input Help in Flow Logic
    The following input help methods are obsolete and should not be used. They are still supported
    for compatibility reasons.
    In the screen flow logic, you can specify a value list for a screen field <f> as follows:
    FIELD <f> VALUES (<val1>, <val2>,...).
    The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
    input check [Page 581] are not appropriate for input help.
    You can also create a value list by accessing a database table as follows:
    FIELD <f> SELECT *
    FROM <dbtab>
    WHERE <k1> = <f1> AND <k2> = <f2> AND...
    In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
    checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
    581], is not necessary for input help.
    If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
    may be affected by any check table attached to the field.
    Attaching a Search Help
    Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
    the name of the search help in the corresponding field in the attributes of the screen field in the
    Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
    possible to place a value from the hit list onto the screen.
    Input help on a screen.
    REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
    DATA: CARRIER(3) TYPE C,
    CONNECTION(4) TYPE C.
    CALL SCREEN 100.
    MODULE CANCEL INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    The next screen (statically defined) for screen 100 is itself. It has the following layout:
    602 April 2001
    Cancel
    Airline
    Flight number
    Screen field with search help
    Input help in the flow logic
    The input fields have been adopted from the program fields CARRIER and
    CONNECTION. The function code of the pushbutton is CANCEL, with function type
    E. The search help DEMO_F4_DE with the search help parameter CARRID is
    assigned to the screen field CARRIER. The search help uses the database table
    SCARR.
    The screen flow logic is as follows:
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    FIELD CARRIER VALUES ('AA', 'LH').
    FIELD CONNECTION SELECT *
    FROM SPFLI
    WHERE CARRID = CARRIER
    AND CONNID = CONNECTION.
    When the user chooses the input help for the individual fields, the following input
    help is displayed:
      For the Airline field, the search help displays the names of the airlines and places the airline
    code in the input field for the chosen line. If the airline code is not one of those listed in the
    VALUES list of the screen flow logic, the input check triggers an error message in the PAI
    event. So the search help overrides the VALUES addition for the input help, but not for the
    input checks. This is therefore not an appropriate place to use the VALUE addition.
      For the Flight number field, the flow logic displays the selected entries from the database
    table SPFLI and places the selected line in the input field.
    Regards,
    Bhaskar

  • Search help for custom entries in selection screen

    Hi Gurus,
    I have a requirement of adding four entries as a search help to a selection screen field P_TABLE.I tried using the function module F4IF_INT_ TABLE_VALUE_REQUEST as below.I want to add four entries Revenue,Cost,RIH and Summarised WBS Actual Data for the selection screen field P_TABLE but the problem is the function module is not getting triggered.
    See the code below.
    REPORT  Z_DEL_OHTABLE.
    DATA: V_RESPONSES(6),
          V_TEXTS LIKE ALDBOUT,
          V_PROG TYPE SY-REPID,
          V_DYNNR TYPE SY-DYNNR.
    DATA: begin of it_openhubs occurs 0,
          v_tabname type c length 30,
          end of it_openhubs.
    DATA:
           it_return type STANDARD TABLE OF DDSHRETVAL,
           wa_return like line of it_return,
          l_i_field_tab TYPE STANDARD TABLE OF dfies INITIAL SIZE 0,
          l_i_dynpfld_mapping TYPE STANDARD TABLE OF dselc INITIAL SIZE 0.
    SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE title.
      parameters:P_TABLE(30) type c.  " USER-COMMAND UPD,
    SELECTION-SCREEN END OF BLOCK B0.
    V_PROG = SY-REPID.
    V_DYNNR = SY-DYNNR.
      it_openhubs-v_tabname = 'Cost and Expense'.
          append it_openhubs.
      it_openhubs-v_tabname = 'Revenue'.
      append it_openhubs.
       it_openhubs-v_tabname = 'Revenue in Hand'.
       append it_openhubs.
        it_openhubs-v_tabname = 'Summarised WBS Actual Data'.
        append it_openhubs.
        CLEAR IT_OPENHUBS.
    INITIALIZATION.
      title = 'OH TABLE DELETION- DELETE CAREFULLY'.
    START-OF-SELECTION.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_TABLE.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
        DDIC_STRUCTURE         = ' '
          RETFIELD               = 'v_tabname'
        PVALKEY                = ' '
         DYNPPROG               = V_PROG
         DYNPNR                 = V_DYNNR
         DYNPROFIELD            = 'P_TABLE'
        STEPL                  = 0
        WINDOW_TITLE           =
        VALUE                  = ' '
         VALUE_ORG              = 'S'
        MULTIPLE_CHOICE        = ' '
        DISPLAY                = ' '
        CALLBACK_PROGRAM       = ' '
        CALLBACK_FORM          = ' '
        MARK_TAB               =
      IMPORTING
        USER_RESET             =
        TABLES
          VALUE_TAB              = it_openhubs
        FIELD_TAB              = l_i_field_tab
        RETURN_TAB             = it_return
        DYNPFLD_MAPPING        = l_i_dynpfld_mapping
      EXCEPTIONS
        PARAMETER_ERROR        = 1
        NO_VALUES_FOUND        = 2
        OTHERS                 = 3
      IF SY-SUBRC <> 0.
        READ TABLE it_return INTO wa_return INDEX 1.
         IF sy-subrc EQ 0.     
    p_table = wa_return-fieldval.
         endif.
    Please help me out.
    Thanks,
    Srini.
    Edited by: Srinivasan Ganapathy on Jan 28, 2010 6:05 AM

    Hi ,
    Change your code as below:
    1. Fill the internal table it_openhubs inside the event "at selection screen on value request".
    2.  Always follow the below sequence:
        Initialisation
       At selection screen
       Start of selection.
    3. The declaration of variable v_tabname is changed from type c length 30 to type char30.
    I tried the below code , its working fine.
    DATA: V_RESPONSES(6),
          V_TEXTS LIKE ALDBOUT,
          V_PROG TYPE SY-REPID,
          V_DYNNR TYPE SY-DYNNR.
    DATA: begin of it_openhubs occurs 0,
          v_tabname type char30,  " length 30,
          end of it_openhubs.
    DATA:
           it_return type STANDARD TABLE OF DDSHRETVAL,
           wa_return like line of it_return,
          l_i_field_tab TYPE STANDARD TABLE OF dfies INITIAL SIZE 0,
          l_i_dynpfld_mapping TYPE STANDARD TABLE OF dselc INITIAL SIZE 0.
    SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE title.
      parameters:P_TABLE(30) type c.  " USER-COMMAND UPD,
    SELECTION-SCREEN END OF BLOCK B0.
    INITIALIZATION.
      title = 'OH TABLE DELETION- DELETE CAREFULLY'.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_TABLE.
      V_PROG = SY-REPID.
    V_DYNNR = SY-DYNNR.
    clear  IT_OPENHUBS.
      it_openhubs-v_tabname = 'Cost and Expense'.
          append it_openhubs.
      it_openhubs-v_tabname = 'Revenue'.
      append it_openhubs.
       it_openhubs-v_tabname = 'Revenue in Hand'.
       append it_openhubs.
        it_openhubs-v_tabname = 'Summarised WBS Actual Data'.
        append it_openhubs.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'v_tabname'
          dynpprog        = v_prog
          dynpnr          = v_dynnr
          dynprofield     = 'P_TABLE'
          value_org       = 'S'
        TABLES
          value_tab       = it_openhubs
          return_tab      = it_return
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc <> 0.
        READ TABLE it_return INTO wa_return INDEX 1.
        IF sy-subrc EQ 0.
          p_table = wa_return-fieldval.
        ENDIF.
      ENDIF

  • How to create an  search help for standard Screen

    Hi,
    Can any one help me out ... How to create a search help for standard screen field.......
    thanks & regards,
    Naveen...

    Hi Naveen.
    I would like to suggest a couple of references,
    [SDN - Standard Reference for create a search help for own fields in selection screen |How to create a search help for my own fields in selection screen;
    [SDN - Standard Reference for Attaching search help to standard screen|Attach search help to standard screen;
    [SDN - Reference for want to add a field in standard search help screen|want to add a field in standard search help screen;
    [SDN - Reference for Attaching a search help to a standard screen - Case 2 |attaching a search help to a standard screen;
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • Search help for a field in a web dynpro app

    Hi All,
    I have a web dybpro application where I need to add a field on the selection screen, the field that I need to add is USR02-BNAME. I have added the required field on the screen but now I need to have a F4 help for the same but when I looked US02 the search help is not defined, can you please tell me how can get this.
    Thanks

    Raja,
    If your attribute( selection field)  is of type any dataelement and if corresponding domain has values then those values will appear in F4 help.
    Or in se11 create one search help for that field.automatically it will reflect in apps.
    Or Use OVS( Object value selector) , its a kind of advance search help...
    Regards
    Srinivas

  • Search help for a field in ztable

    Good day everyone!
    I want to create a search help for a field. I have a field 'country' in my Ztable. Now I want to create a search help for that field so that they appear in the SM30 transaction while entering the data into the table. How can I do that?
    thanks.

    First of all if the field is country and you want to display all the countries avaiable in SAP in the search help then yuo dont need to create search help for that. For that field put the data element LAND1. The F4 help will automatically appear in SM30 and when you press F4 all the countries will be displayed in the hit list.
    Now suppose there is a case where you want to display selected values only  and not all the countries in your search help then one way is to create a z-table of countries and put all the countries you want in that table then create z-data element and z-domain for that country field and in domain give the table as a value table.
    Another way is to create a view for T005  and T005T table and give the selection conditions as per your requirement and then create the search help with this view and attache the search help to your country field.

  • Hi search help for my field?

    Hi friends,
                   I have got a input field in screen painter with name FORMNo.
    Formnos are stored in Zform table.
    I want to create search help for this field please can anyone share me the procedure for createing the search help for my field. Its veru veru urgent please help me with answer.
    points will awarded for helpful answer.
    THks

    hi,
    PARAMETERS: p_filnam TYPE ibipparms-path.
    For value request use the below function
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_filnam. 
    And
    you have to call one functio nmodule
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
       program_name        = syst-cprog
       dynpro_number       = syst-dynnr
      FIELD_NAME          = ' '
    IMPORTING
       file_name           = p_filnam-----pass the p_filnam here
    Reward Points if usefull
    Regards
    Fareedas

  • How to create Search Help for a field in Table control !!

    Hello Friends,
                  I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
    Thanks,
    Senthil

    Check the sample code:
    *&  Include           ZSRO_MPRN_SEARCH                                 *
    MODULE PSTLZ_F4 INPUT
    MODULE pstlz_f4 INPUT.
    reading post code
      DATA: stepl TYPE systepl,
            stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode  = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s005(zspa) WITH ws_postcode .
      ENDIF.
    ENDMODULE.                    "PSTLZ_F4 INPUT
    MODULE MPRN_F4 INPUT
    MODULE mprn_f4 INPUT.
    reading post code
    DATA: stepl TYPE systepl,
           stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         ws_dynpfld-stepl  = mprn-current_line.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         break gblap0.
         ws_dynpfld-stepl  = mprn-current_line.
         LOOP AT i_mprn.
           MOVE i_mprn1-mprn TO i_mprn-mprn.
           MOVE ws_postcode TO i_mprn-post_code.
           MODIFY i_mprn INDEX
                    mprn-current_line." transporting MPRN POST_CODE.
         ENDLOOP.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s006(zspa) WITH i_mprn1-mprn .
      ENDIF.
    ENDMODULE.                    "MPRN_F4 INPUT
    MODULE GNTC_F4 INPUT
    MODULE gntc_f4 INPUT.
      DATA: BEGIN OF lt_gntc OCCURS 0,
              gntc LIKE iflot-zzgntc,
            END OF lt_gntc.
      CLEAR:   lt_returntab, lt_gntc.
      REFRESH: lt_returntab, lt_gntc.
      lt_gntc-gntc = 'DM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      lt_gntc-gntc = 'NDM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZZGNTC'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select Gas Nomination Type Code'
          value_org       = 'S'
        TABLES
          value_tab       = lt_gntc
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        i_mprn-dm_ndm = lt_returntab-fieldval.
      ENDIF.
    ENDMODULE.                    "GNTC_F4 INPUT
    *&      Module  mprn1_f4  INPUT
          text
    MODULE mprn1_f4 INPUT.
      DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_returntab1  LIKE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
            lt_dnpfields1  LIKE dynpread OCCURS 0 WITH HEADER LINE.
      DATA: stepl1 TYPE systepl,
            stepl_index1 TYPE systepl.
      DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
             ws_dyname1     LIKE d020s-prog,
             ws_dynumb1     LIKE d020s-dnum,
             ws_dynpfld1    LIKE dynpread.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
             lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
             stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-MPRN'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " mprn1_f4  INPUT
    *&      Module  pstlz1_f4  INPUT
          text
    MODULE pstlz1_f4 INPUT.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
              lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
              stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-POST_CODE'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " pstlz1_f4  INPUT
    Regards,
    Prakash.

  • How to create Search Help For Ztable fields

    Hi all,
    Please let me know How to create Search Help in SE11(what are the parameter i should pass)
    and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

    hello .
    there are two types of search helps .
    1. elementary search help .
    2. collective serch help
    Below are the steps to create elementary search helps :
    1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose  Create.
    2.then youget a option elementary or collective search as per you r need .
    3.select Elementary search help and choose
    4.write explanatory text in the field Short text.
    5. in the selection method give the name of the table or  a view .
    6 . Select the fields that should be used for value selection  or in a hit list .
    7. then define the attributes of the search help .
    8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
    9 .define the  dialog type of the search help.
    The dialog type tells  how the hit list will be displayed in the input help.
    10 . save and activate .
    plz reward if usefull
    Thanks ,
    Abhishek .

  • How to create Search help for the field /SAPSLL/PRGEN-ATTR20V

    Hi ,
    I need to add a search help for the field /SAPSLL/PRGEN-ATTR20V and their is a chk table used for this field is /SAPSLL/TCOATV20.
    In this table /SAPSLL/TCOATV20-ATTRV20V is a Primary key field.
    How can I add search help for this field?
    Any suggestions will be appreciated!
    Regards,
    Kittu

    HI,
    Fixed on my own..
    I am closing this thread!
    Thank you!
    Kittu

  • Search help for a field in table control based on another field value

    Hi,
    I want to attach the Search help for a field in table control based on another field value.
    Please help me asap.
    Will be highly rewarded

    HI,..
      Check these links
    search help in table control
    Re: How to create Search Help for a field in Table control !!
    How to create Search Help for a field in Table control !!
    F4 Help In Table Control
    Control table F4 help
    Problem in F4 help in screen field
    check this code
    DATA: BEGIN OF it_value4 OCCURS 0,
             TEXTCODE  LIKE  ZXX-TEXTCODE,
             TEXTDESC  LIKE  ZXX-TEXTDESC,
           END OF it_value4.
      progname = sy-repid.
      dynnum   = sy-dynnr.
             SELECT TEXTCODE TEXTDESC
               FROM  xxxx
               INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
              WHERE  LOSS_CODE =<b> IT_VALUE1 .</b>
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield    = 'TEXTCODE'
          dynpprog    = progname
          dynpnr      = dynnum
          dynprofield = 'ITVALUE-TEXTCODE'  "-->UR  4 th filed value in screen
          value_org   = 'S'
        TABLES
          value_tab   = it_value4.
    endmodule.
    Message was edited by:
            veereshbabu ponnada

  • How to change search help for standard field in me51n.

    hi frnds,
              I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
    best regards,
    sudip biswas

    Hi Abhi,
    Try using any one option:
    Create a Search Help in SE11.
    Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
    OR
    Create a Zdata element in SE11.
    In Data Element, under Further Characteristics tab, enter Name  Parameters of Search Help.
    Assign this data element to that field in ur Ztable.
    OR
    Create a Zdomain and maintain a Value Table or Fixed Values for it.
    Assign this domain to that field in ur Ztable.

  • Search help for a field using a selection method which has a text table.

    Hello all,
    I am trying to create a search help for one of the fields in a structure say RFCDEST. Now for this i am giving the selection method as the DB table where all the RFCDEST are maintained. However there is a text table which is also comes up for this selection method and the description of the filed RFCDEST is in that text table and the description is not stored in the main table which i specified as the selection method.
    My query is that on F4 now all the rfc destinations are being shown however the description i am not able to show them because there is no field in the table specified in the selectionmethod which hold s the description but instead it is there in the text table, how can i fetch the description from there and display in the search help.
    Warm Regards,
    Naveen M

    look at search help FC_RFCDEST. that problem has already been solved with this search help.

  • How to add a search help for a field in Screen Personas?

       I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
       I found a property in the help document named "IsLookupSupported". Is it the key?  But I saw it was gray in the field I created, and its value is "false". I could not change it.

    Hi, Tamas,
    I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    The correct code is like:
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
    Xin

Maybe you are looking for

  • Playing video from MacBook Pro to TV (Like iPod)

    Hi, I have an iPod Video, with the cables that I can plug from the 3.5mm jack to the a/v ports on my tv and play video on my iPod... I'm just wondering if there's anyway to just use this cable to plug from my MacBook Pro straight to my TV a/v ports a

  • MSI, please stop using non-standard keyboard layouts.

    God dam it MSI, why do you insist on messing with layout of the bottom row of the keyboard? You get everything else right, but for some reason when it comes to the bottom row of keys you want to say "Industry standards? 20 years of tradition? Fack th

  • Is the ipod nano 7th generation currently available for purchase?

    Hello! I was recently reading some reviews online and read that Apple has launched it's 7th generation of it's ipod nano; however, when I do a search for it to purchase all I get is the 6th generation nano. Has Apple launched it's 7th generation nano

  • XML parsing failed

    SELECT UPDATEXML(Document(doc).ReformedContent, Variables(i).nodepath||'/text()', 'Jaunaa veertiiiba', 'xmlns:text="urn:oasis:names:tc:opendocument:xmlns:text:1.0"')               INTO Document(doc).ReformedContent               FROM DUAL            

  • Flexdoc tool tip

    Hi, I can't see the the java-doc like comments appearing in tool tip when I place the cursor over a declared or core type, like ArrayCollection. The problem is same in Flex Builder professional 3 or eclipse plugin. Do I need third party plugin for th