Creating a Staff without a midi part??

Hi,
I'm trying to score something in Logic. If look at scoring in the manual, it tells me "a staff must exist" before you can score (well obviously!).
Is it possible for me to create a score before a midi part exists. So can I create a new project, go to score editor and start scoring? If so, how to I create a new staff/stave to work with. When I bring up the score window, it says nothing to display.
Any help would be really useful.
Regards
T.

Hi
you just need to create an Empty Region for first in the Arrange..
after that, select the emty region and open the score page.
you can use Pencil tools to create an Empty region
G

Similar Messages

Creating and Saving My Own Midi Loops/Instrument

I know how to create a new instrument in GB but can I also create and save midi loops that are attached to the instrument and save them in the loop browser? The same way other midi parts work so when you drag the midi out of the loop browser and into your session it loads both the part and the instrument at the same time?

spidernook wrote:
can I also create and save midi loops that are attached to the instrument
select your loop and use the Add To Loop Library menuItem

How do you create an array without using a shell on the FP?

I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
do not want to go that route.)

Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
If I seem a tad green... well I am.
I hope you understand the LabVIEW environment and icons are still very new to me.
Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
"I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
Attachments:
Initialize_Settings.vi ‏55 KB
Save_Settings.vi ‏52 KB

Create a pdf without showing it in the UI?

Hello!
I'm trying out Interactive Forms for Java for the first time, so please bear with me if this is obvious.
Is there a way to create a pdf and not display it in the ui? If I for example just want to download or email it.
I've tried setting visibility to None and Blank but that prevents the PDF from being generated at all.
It sort of works if I use FireFox and choose DisplayType activeX since FireFox can't display ActiveX. Our customer runs IE so that is not an option however.
Thank you for any input!
Kind regards,
Richard Linnander
Edited by: Richard Linnander on Jun 18, 2010 1:49 PM
Edited by: Richard Linnander on Jun 18, 2010 1:52 PM

Hi Richard,
You can create a pdf without displying it in UI.
Follow the below steps :
1. Copy your xdp file under mimes folder.
2. create a pdfsource context and DataSource node for pdf.
3. Create a File Download UI element in Ui and bind the data property with pdf source context.
4. Now copy the below code in wdDoInit() which is genrating the pdf from xdp.
wdContext.getNodeInfo().getAttribute("pdfSource").getModifiableSimpleType();
ByteArrayInputStream pdfInputStream = null;
     String templateUrl = null;
     try {
          templateUrl = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(),"Name of XDP with extension");
     } catch (WDAliasResolvingException e1) {
          // TODO Auto-generated catch block
          e1.printStackTrace();
     try {
          IWDPDFDocumentHandler pdfDocumentHandler = WDPDFDocumentFactory.getDocumentHandler();
          IWDPDFDocumentCreationContext pdfDocumentCreationContext = pdfDocumentHandler.getDocumentCreationContext();
          pdfDocumentCreationContext.setData(WDInteractiveFormHelper.getContextDataAsStream(wdContext.nodeDataSource()));
          pdfDocumentCreationContext.setTemplate(getByteArrayFromResourcePath(templateUrl));
          //pdfDocumentCreationContext.setDynamic(true);
          IWDPDFDocument pdfDocument = pdfDocumentCreationContext.execute();
          pdfInputStream = (ByteArrayInputStream)pdfDocument.getPDFAsStream();
          wdContext.currentContextElement().setPdfSource(pdfDocument.getPDF());
     } catch (WDPDFDocumentRenderException e) {
          wdComponentAPI.getMessageManager().reportException("An error occured: "+e.toString(), true);
     }catch(Exception e){
          wdComponentAPI.getMessageManager().reportException("An error occured: "+e.toString(),true);
5. create a another method in global section
private byte[] getByteArrayFromResourcePath(String resourcePath)
     throws FileNotFoundException, IOException {
     FileInputStream in = new FileInputStream(new File(resourcePath));
     ByteArrayOutputStream out = new ByteArrayOutputStream();
     int length;
     byte[] part = new byte[10 * 1024];
     while ((length = in.read(part)) != -1) {
     out.write(part, 0, length);
     in.close();
     return out.toByteArray();

How to create new view without interlinking with gantt chart or resource views

ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource views

Hi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Create aspx page without masterpage and add visual webpart into it

Hi
I have to create aspx page programatically and add it to the site pages library of team site.
Requirements for this page are
1) Page should not use masterpage
2) Add a visual web part to this page
3) on feature activation add this page with webpart should be added to site and set this page as welcom page
We are using TeamSite template in our project
Please provide me solutions with examples if possible
Thanks
Bhavin

Hey,
is the visual webpart a custom webpart which is created by yourself or is it a standard webpart such as content editor?
Not to use the masterpage is quite difficult because the masterpage is necessary for several things. As far as I know there is no way to create a page without a masterpage. As a workaround I would recommend to try the "isDlg=1" parameter in the
url. This flag hides most of the elements in the masterpage. As an example it is used by the modal dialog framework. Every page which pops up as a modal dialog (such as the forms of lists and libraries) is a ordinary page (including the masterpage) but it
has the flag in its url. So only the actual content of the page is displayed while the elements of the masterpage are hidden.
Try to set the welcome page like this: http://[webUrl]/SitePages/YourCustomPage.aspx?isDlg=1

Creating a catalog without ecommerce

Is is possible to just create a catalog without eCommerce function?
Do I have to hide the "add to cart" in CSS?
Thanks

Hi there, Vivien,
The add to cart is part of a product. You can set up catalogs and products then customise the layouts. You do not have to add to add to cart tag if you just want people to view the products.

Proforma invoice is created for delivery without PGI in STO(Depot sales)

Dear Gurus,
I am facing a strange issue, user created Purchase order with some material X of 4 quantity, and he created the replenishment delivery for 1 quantity and without doing any Picking and PGI but system allowed to create proforma invoice with 4 quantity I checked the copy control config settings for Delivery and Proforma invoice all are maintained fine (viz., billing qty as D, copying req:311 and Data VBRK\VBRP:001)( Ichecked the change log for delivery but I didnt observed any chanes in delivery) .. strange to watch ........created the same scenario in quality but system doesnt allowed to create proforma invoice without PGI and picking(Just one month before quality is refreshed with Production).
If anyone faced the same problem let me konw the solution ate the earliest.
Best Regards,
Kishore.SGR

Hi
As already said, as per the standard the Performa Invoice do not check the Goods Issue status of a Delivery since it uses the Copying Requirement 009 in transaction VTFL.
If you want your performa invoice to be created only after the PGI of a delivery, then use the Requirement 003 in Copying Requirement field for the combination of your Delivery Doc. and Billing doc. in transaction VTFL at Header level.
Regards
Amitesh Anand

How to create a Region without Task Flow

I want to create a Region without creating bounded task flow.
I need to divide my page into some Regions, and I want to have Page Fragments under each region.
I created one Region but not able to understand what I need to give as value attribute
<af:region value="">
I am confused what is needed as value attribute, it is required as RegionModel, would you please help me regarding this?

Hi,
Instead of using region, try using <af:declarativeComponent> for this.
Refer below-
https://blogs.oracle.com/jheadstart/entry/avoid_use_of_jspinclude_where
Thanks,
Ansh

Creating Job Order without Assembly Routing

How can you prevent Users from Creating Job Order without creating routing to the Assembly used
Regards

Hi Laxmikant
Please note the steps
Create a BOM Application in OS30
Create a new BOM ID in OS31 with BOM Usage as Production
Assign this BOM ID in BOM Application
Ensure that ID is responsible for Production planning alone.
Then in that ID maintain a BOM alone without any items.
Assign this BOM Application in Order type dependent parameters in OPL8
Now u can create a production order w/o BOM
Rgds

I just bought a new Ipad mini a while ago, a created a new apple ID "***************" , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?

I just bought a new Ipad mini a while ago, and created a new apple ID *********** , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?
<Edited by Host>

Read this:
iTunes Store: Accepted forms of payment
It is the same for the app store. You are required to have some sort of payment method in the record.
Barry

How do I create a Snapshot without testing query?

I'm working in an environment where the connection to the database server is done through a VPN that is sometimes broken and I have to wait for some time until it is restored. Other times, the database server is just down and in maintenance.
In the meantime, I have to work with Director installed in a local virtual machine in my laptop.
So, now I'm trying to develop some EDQ processes when there is no connection to the database, I'm unable to save snapshots because they require a test to occur (clicking in the Test button) before saving them, even if I'm providing a full SQL query to snapshot. I think it's because Director needs to know stuff like the data types of the columns to initialize properly the fields in the process.
The problem is that I can't stop working just because there is no VPN. I should be able to create the processes and test them later when connection to the database is restored. I can do a lot of stuff (I can even copy-paste snapshots!) but I can't change nor create new ones, and that blocks me constantly.
How can I do a snapshot save without database connection and have Director asking me the datatypes instead of trying to guess them from a "Test"?

Hi,
You can't create a snapshot without a connection to the database. A connection is needed when a snapshot definition is created in order to retrieve the column names and data types. As a solution to your problem, why not use data interfaces? Create a data interface that is of the required shape and refer to this in your processes (instead of the snapshot). You can then create mappings to different sources of data, e.g. snapshots, reference data, etc. You can test your processes when you're offline using a reference data mapping.
regards,
Nick

Error while creating Production order without BOM

Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
Sid

Dear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria

How do I set up my Airport Extreme to create a LAN without being connected to the internet?

I'm trying to set up a POS(point of sale) for my small restaurant. ADSL internet is not available at the site. I have set up my system(finally)while hooked up to my router at home, however my system will not work when disconnected from my router. How can I configure the Airport to operate my printers without an internet connection?

First off- Thanks for taking the time to answer me.
I have 2 Star Micronic Ethernet connection printers that I hope to operate using a POS software interface called Ambur.
The program is pretty straight forward and while my Airport Extreme was WAN ethernet connected to my D-Link Router, I had the program and printers integrated and operating surprisingly easily.
My issue is that I don't have internet available at the restaurant, so I need to create a network without an internet connection.
I did the hard reset and the rest.
Now I have the same configuration, but not connected through the router, trying to acheive the same result, but its not connecting.
I've tried programming the software with every IP address, including the ones that worked while connected to the other router, to no avail.

Creating inbound delivery without reference to PO - from inbound idoc

Hi guys,
I have a scenario wherein I need to create inbound delivery from inbound Idoc from external system without reference of PO. There is no PO created in SAP and this inbound delivery will be used just to receive material (purely for logistic purpose).
I have identified DELVRY03 or 05 as Idoc type but I am not sure whether system will create inbound delivery without having reference PO. I have two questions here -
1. Can we create inbound delivery without reference to PO?
2. If yes, which Idoc type should I use to create such inbound delivery?
Please help.
Thanks,
Parimal.

Dear Parimal,
In standard, An inbound delivery can be created as follows:
With reference to a purchase order
With collective processing for several purchase orders
With reference to a stock transport order
With reference to a customer return

Creating a Staff without a midi part??

Similar Messages

Maybe you are looking for