Creating a Standby Database with the Same Directory Structure

Hello gurus,
I am self-learning the feature Oracle Data Guard, so I am testing it on Oracle 10g R2.
At Oracle documentation there is a section F.4.: Creating a Standby Database with the Same Directory Structure*, that explains how to create a standby database with RMAN but there is something that I don´t understand:
In the standby server, I created a database with the SID equal to production database* with the objetive to have the same directory structure, but when I try to startup nomount the standby database with pfile appear this expected error:
ORA-16187: LOG_ARCHIVE_CONFIG contains duplicate, conflicting or invalid attributes
So my question is: Is possible have the Same Directory Structure on both: Production and StandBy server?
Thanks in advanced.

Uwe and mseberg: thanks for your quick answers
I have a doubt: How can you have the same directory structure if you have differents SIDs?, for example if you follow the OFA suggestions you would must have:
On Production server: */u01/app/oracle/oradata/PRIMARY/system.dbf*
On StandBy server: */u01/app/oracle/oradata/STANDBY/system.dbf*
Or you created the directory structure manually on StandBy server? For example replacing the string STANDBY* to PRIMARY* before create the database using dbca.
Do you understand my doubt? Excuse me for my english.
Thanks.

Similar Messages

Is it possible to create a Clone database with the same name of source db ?

Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Can I create a database with the same name and DBID that one is dropped?

Hello,
I need to restore a backup database, made with Oracle Enterprise Manager, in a new one, because the original is dropped. I've tried it with the recovery tools but fails, i suppose because the dbid's are not the same.
Then, Is it possible create a new database with the same old database dbid to restore de backup?
Thank you very much.
P.D.: I've too THE OLD spfile---.ora y el pwd---.ora

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

How to create a US account with the same apple ID as my current account

I received a US itunes card given as a gift and it will not redeem in the itunes store since it says I need to have a US itunes account which I do not. Mine is from another country.
I emailed support and they said I could not use the itunes card nor can I transfer the credit to my itunes account for my country(even if it is still in US$). Though they did say that It was possible to create a US account with the same apple ID. I tried it but when I try to register a US account, in the end it says that the apple ID is taken.
Can anyone help?
Thanks.

You can't use the same ID because it is possible to change countries on accounts. The other person using your ID is you! However, technically you can only use the store in a country if you are actually present in the country, and you have to have a credit card billed to an address in the country as proof.
I guess the person at Apple isn't familiar with hte details of thir own legal documents, and you would either have to try to change country on your account (which may run into issues) or start a second account in hte other country (which again may not be easy, nor legal).
The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE
Find somebody you know in the USA and give them a nice present.

I forgot my digital signature password. How do I create a new one with the same email.

I can not remember my digital signature password. I've attempted to create a new one with the same email address. The message I receive is that i already have a digital signature with that email. I would like to use the same email address.

You probably mean that you forgot your digital certificate password and I presume that this is a self-signed certificate that you yourself created, not a certificate that you received from a Certificate Authority (CA). If this is true then you can create a new self-signed digital certificate (Digital ID in Acrobat-speak) the same way you created the first one: In Acrobat XI it is Edit->Preferences->Signatures->Identities&Trusted Certificates->More. Then click on "Add ID" button and follow the prompts. You can create as many self-signed certificates with the same credentials (name, email, etc.) as you wish. You'd have to figure out how to distinguish them, though.

If i cancel an account can I create a new one with the same e-mail address?

I made an account with Game Center and I wanted to use it to get some free apps on the iTunes Store. When I tried to sign in on iTunes (for Windows) it said I had to review my details. I didn't have a credit card so I couldn't complete it and there wasn't any option for no credit card.
I wondered if I could cancel my account and create a new one with the same e-mail address. There was a discussion that you could create a new account on the iTunes Store and have the choice to not have a credit card.
Any help will help!
SuperHoops

No, it does not, not if the creation of the Apple ID was completed, which unless you are referring to a different Apple ID I presume it did since you are posting here. And once created, you can't get apps without providing a payment method; setting up for just free apps requires a very specific procedure or a payment method is necessary. Creating an account via Game Center does not work.
If you can create a new email address (Gmail or Yahoo mail will work), take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.

I want to create a second library with the same account on a separate hard drive....

Hi,
I am running out of room on my iMac to store all of my iTunes music and video. I want to create a second library with the same account on a separate hard drive. Will iTunes Match match both libraries ? Will I be able to acess both libraries from all my devices? Can iTunes Match merge them together so I can have easy access to everything?
Thanks for any advice.
christos

Unfortunately, you can't. The primary address for your iCloud account must be a non-Apple email account. The only exception to this is for former MobileMe subscribers who migrated to iCloud when MobileMe closed, which was 18 months ago.

Another site already exists at . Delete this site before attempting to create a new site with the same URL

Hi Everyone,
It would be great if you can help me with the below.
Few days ago one of our content db went into suspect mode. Our DB team had resolved the issue. But one of the sites that was created probably around the same time is no more available. When I try to create a site on the same URL, I get the following
error.
Another site already exists at <URL>. Delete this site before attempting to create a new site with the same URL
When I try to delete the site or if I try to view the details of the site using Central Administration, I can find the site, but it doesn't display any details like Title, DB Name etc.
If I use stsad -o enumsites command to list ll the site, for the given site I get the following error:
<nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named <URL>.
I am not even able to delete it using Powershell.
Please suggest.
Thanks,
Uttkarsh

You might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
Amit

Two database with the same sid but different ORACLE_HOME on one host

two database with the same sid but different
ORACLE_HOME on one host,and if configure them with
two differnt lisnter staticaclly,this abosultely work
because in the lisnter.ora we must provice
ORACLE_HOME variable,with this ORACLE_HOME the client
can differentiate which database to connect,but if
use dynamically register feature,how can the client
tell which database to connect?

Also note that this type of configurtion may not be supported.
Just because a given configuration works in certain given conditions does not mean that it would be supported.
If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

HT2486 how do I copy an existing Group in Contacts to create a new group with the same contacts in it?

How do I copy an existing group in Contacts to create a new group with the same contacts in it?

Hi there,
Unfortunately the use case you describe hasn't been implemented in Firefox. It's not possible to move a tab group out to its own window at this point. Generally the tab groups feature hasn't been worked on much recently, not sure why.
As to TabMixPlus, that's a third-party add-on which Mozilla doesn't directly support. You can find support links from the add-on page: https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus/
Hope this helps.
Cheers,
David

Problem creating physical Standby database with RMAN

Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.

Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again

How do I create a target table with the same PK as the source table?

I am trying to create a target table in a mapping that will end up with the same primary key as the source table.
It is a simple map that simply uses a subset of the columns of the source table in the target table. I was wanting to create and bind a new table by dragging the columns I want from the source to the initially blank target table operator, change the column names and create a primary key to match the source table.
I can't seem to be able to create a constraint on the table in the mapping. I can create the constraint after the table is created and boound to the database object but the PK doesn't carry back into the mapping.
I need it in the mapping so I can use the UPDATE/INSERT operation and use the 'All Constraints' implementation. The mapping won't let me validate the object without the PK on it in the map.
Believe it or not folks, I am getting better at this.
Thanks very much for the guidance.
Gary

Hi Gary
You are close, you are really close... :-))
You need to do exactly as you propose plus one extra step. Build the map as you describe, binding the new table to the target. Then you edit the table definition to add the primary key and any other constraints you need. After this is the step that you are missing.
You need to do the following:
1. Go back and re-edit the map
2. Right click on the table
3. From the pop up menu, select Reconcile Inbound
4. Set any operators that you need for the UPDATE/INSERT
5. Save the map
6. Commit your changes
The first three steps above make the map read in the indexes and constraints that you set on the table. Finally, you need to deploy the table and then deploy the map.
Hope this helps
Regards
Michael

Creating physical standby databases with DG Broker & OEM

Hi guys,
I manage 8i, 9i & 10g databases through OEM 10.2.0.2.
Today, I would like to create physical standby db for the most important applications. Because I'm a lazy guy, I'd like to do it the easiest way, with GUI and wizzards provided by OEM.
1. Do you know any tutorial on the Internet that would help to do it easily ? My only source up to now is the official DB broker documentation (http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/toc.htm), which is 300 pages long like every Oracle doc. I'd appreciate any tutorial that could lead me straight to the essential. I've heard that is not so tricky to create a physical standby db
2. Is the procedure really different to create (and then manage) a physical standby database on Oracle 8i, 9i and 10g ? Is it possible to do it through DB Broker and OEM for every version ?
thank you for your help
Antoine

Antionio,
Oracle Documentation is the best source of configuring any Oracle component.
But, If you do not want to read the entire doc, and want to configure Dataguard Broker (without OEM), then here is the Link.
http://www.oracledba.org/10g/dr/10gR2_dataguard_RAC_to_RAC.html#Configure_Dataguard_Broker:

Creating DSn connecting database in the same drive)

Hi I am creating a DSn by Java prograame
I have a Java file DSN.java where a fynction is written
createDSN(String driverType, String dsnName, String filePath)
I have all my .java files in D: Drive
and when i am giving filePath as
String fP = "\\folder1\\NameOfMyAccessfile.mdb"
it is trying to create DSN( name as dsnName ) by mapping it to file in C Drive but normally it should try to create DSN connecting the database in the root directory.(in my case it is D drive)
My JDk is in C drive
Please help me how to create DSN when the database is in the root directory?
Thanks

salam,
je voulais te demander si tu peux:
*comment tu fais pour creer un DSN en java directement.
*comment tu fais pour avoir la liste de tes DSN sur ta machine,
*comment tu fais pour te connecter via une DSN.
--- je te remercie d'avance de ta collaboration;

Unable create a target file with the same name

Hi,
I have to pick an attachment from a web service and place the attachment in
a folder, with the same name (Attached File Name). I tried this using SOAP to file
scenario. Using SOAP, I'm able to get the attachment inside PI with the same
name, but not able to generate the file in the receiver end.
Please let me know if this is possible or else is there any other way to do
it.
Regards,
Deepak Ravi

Check also:
Combining three different aspects of PI (ASMA, AF Module and variable substitution) in one shot
Dynamic Configuration vs Variable Substitution - The Ultimate Battle for the File Name
Regards

Creating a Standby Database with the Same Directory Structure

Similar Messages

Maybe you are looking for