Creating a Storage Handling Unit With The Same # As A Storage Unit

Hello dear WM and MM experts,
I'm beginning to use Handling Units and Storage Units. From what I've been reading, it seems like you can have a HU enter the warehouse in the form of a SU with the same ID#. Is that correct? If that's the case, what transaction(s) is used to create the SU using the same ID# as the HU.]
Basically, I have a pallet with product on it and I'd like to know how to have a SU and a HU with the same ID# to be able to handle this pallet in both WM and MM.
Your input is greatly appreciated.

Hi Oscar,
In the shared thread reply from Sushant wanjari talks about both the scenario when HU management is active and when HU management is not active
Basically i am summarizing the response provided by Sushant  "In the case where HU management is active and you want to carry HU number as SU number. No need to define the SU number range in the system. SAP recommends only activating length conversion for storage unit numbers. Note, that this setting is made at client level, and is therefore valid for other warehouse numbers in the same client.
Inbound delivery for which Putaway TO needs to be created
HU in the inbound delivery
During TO creation system propose the same HU number as SU number
Hope this helps. Please let us know if you need any further input on this

Similar Messages

  • I created my Apple ID in Ireland, but would now like to switch to a German Apple ID, keeping the same email address. How do I delete my old Irish Apple ID, so I can create a new German one with the same email?

    I created my Apple ID in Ireland, but would now like to switch to a German Apple ID, keeping the same email address. How do I delete my old Irish Apple ID, so I can create a new German one with the same email?

    Welcome to the Apple Community.
    Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
    In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
    You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support.

  • Can I create a lot of instance with the same name?

    I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
    choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?

    You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
    // array
    int numCreatures = randomGeneratedCreatureQuantity();
    Creature[] monsters = new Creature[numCreatures];
    for (int j = 0; j < numCreatures; j++) {
        monsters[j] = new Creature();
    // Or a list
    int numCreatures = randomGeneratedCreatureQuantity();
    ArrayList monsters = new ArrayList();
    for (int j = 0; j < numCreatures; j++) {
        monsters.add(new Creature());
    }Good luck
    Lee

  • I need create a lof of files with the same password with Acrobat Standard 9

    Good Morning:
    I need create a lot of pdf files with password. After I put all files in a directory and with the Acrobat Writer Version 4 selected this directory and the program Acrobat automaticly put the same password in all the files. After as well, I could select files with the same password and changed the password automaticly of this files.
    Now with the Acrobat Standard 9, I don't know make this taskes. My cuestion is "Can I make this things with acrobat Standard 9 or I need other version?"
    Thank you

    Thank you for your help
    Your solution is different from the other members' opinion. ¿Is This option  available in the Adobe Standard ? Because I have not found it in Adobe Standard.
    Your option is with   Edit > Preferences > Batch Processing Security Method "Password Security" and the option of the other members is with Advance > Batch Process.
    I have tried to change some pdf files that had password with Adobe Pro, so I tried to remove the security password from the pdf files, with Advance > Batch Process.
    I created a new secuence with security through  the Option "Whithout Password" but when I executed the secuence, the program showed me a window with this message "OPERATION NO AVAILABLE".
    ¿Can you help me? I don't kown how I can remove the password of this pdfs, yet.
    Thank you in advance.

  • Creating multiple entries in ztable with the same name

    Dear sir / madam,
    iam new in sap-abap , i have created ztable in se11, table name zrajesh
    and fields i have created zemp_name and zempid which has data element and domain also. and zprice.
    when iam creating entries in table mataince generator
    eg: zemp_name     zempid       zprice
          rajesh              001             100
          raj                     002            110
          rajesh              001             200  
          rajesh             001              300
         rajesh              001              250
    i am looking forward to create multiple entries of the same employ name .. as shown in example . iam able to create numbers of entries with the help of different names. is it possible to create numbers of entries with same name..
    and it will show all the entries in the list when display.
    please help me..
    regards,
    rajesh swami

    hi,
    have a look at these tables
    VBAK -  Header table
    VBAP -  Item table
    here in table VBAK we have a key field VBELN(document no.)
    Whereas for the same document no. we can have many entries in the the table VBAP where the key is VBELN(document no.)
    and POSNR (line item no.).
    You have to do something of this type i suppose ............
    Hope it helps you,
    Regards,
    Abhijit G. Borkar

  • Garageband: How can I listen to a loop I created while recording over it with the same external instrument?

    I basically just want to create a new loop using a live instrument. Then record over it while listening so I can lay several complimentary tracks over my own playing,
    I own a Steinberg CL1 USB audio interface and a decent condenser microphone.
    I am a newbie to GB
    thnx
    ian

    Ian Wenig wrote:
    record over it while listening
    create new tracks on which to record each part, GB always plays back all other tracks unless you mute them

  • Can 2 invoice number be created with the same Purchase Order number

    HI,
    I have created one invoice number with a Purchase order number 4500020000. Now is it possible to create a another invoice number with the Same PO

    In me23n transaction go to Invoice tab(In items), there will be a check box for <b>Final Invoice</b>. If it is checked, full amount is invoiced.
    The same can be checked in table EKPO.
    Field EREKZ = 'X' means final invoice done.
    another method is:
    foe each item:
    go to table EKPO and see the quantity.
    then go to table ekbe and get all the invoiced quantity by passing VGABE = '2'. for the PO item.
    add all the records with SHKZG = 'H' and subtract the total of all SHKZG = 'S' records.
    If this quantity is equal to the ekpo quantity, then there is no more quantity to be invoiced.
    Get the PO Item quantities
      SELECT EBELN
             EBELP
             MENGE
        FROM EKPO
        INTO TABLE IT_EKPO
       WHERE EBELN IN R_EBELN.
    Get the Invoice Receipt Documents for the POs
        SELECT EBELN
               EBELP
               BEWTP
               MENGE
               GJAHR
               BELNR
               BUZEI
               SHKZG
          FROM EKBE
          INTO TABLE IT_EKBE
          FOR ALL ENTRIES IN IT_EKPO
         WHERE EBELN = IT_EKPO-EBELN
           AND EBELP = IT_EKPO-EBELP
           AND VGABE = C_VGABE_2.
    logic to check if the IR Quantity equals the PO Quantity for each Item
      LOOP AT IT_EKPO.
        CLEAR V_BPMNG.
    For each line item, calculate the total Invoiced Quanity
        LOOP AT IT_EKBE WHERE EBELN = IT_EKPO-EBELN
                          AND EBELP = IT_EKPO-EBELP.
    Change the sign of the quantity for debit
          IF IT_EKBE-SHKZG = C_SHKZG_H.
            IT_EKBE-MENGE = -1 * IT_EKBE-MENGE.
          ENDIF.
          V_BPMNG = V_BPMNG + IT_EKBE-MENGE.
        ENDLOOP.
    If the PO Item Quantity is equal to IR Quantity
        IF IT_EKPO-MENGE = V_BPMNG.   "ARAO
    write:/ 'No more quantity to be invoiced'.
        ENDIF.
      ENDLOOP.
    Regards,
    ravi
    Message was edited by: Ravi Kanth Talagana

  • How do you stop your phone from creating two albums with the same photos after syncing?

    When I first bought my phone I was able to sync my photos by checking the folder I wanted synced under iTunes. This put all those photos on photo library on my phone. I recently added more photos to that folder and tried to sync them it now put them in the photo library album and also created another album with my folder name. So I have two albums with the same photos. I tried in checking that folder in iTunes and of course they're not in my photo library. Please help. I don't want two albums with the same pics

    This is how Apple has always handled photos.  nothing has changed at all.
    Just as your music is in your library and you can access those exact same songs from a playlist, all of your synced pics are in the Photo Library and those exact same photos (NOT duplicates) can be accessed from the album name that you chose to sync.

  • How to create a US account with the same apple ID as my current account

    I received a US itunes card given as a gift and it will not redeem in the itunes store since it says I need to have a US itunes account which I do not. Mine is from another country.
    I emailed support and they said I could not use the itunes card nor can I transfer the credit to my itunes account for my country(even if it is still in US$). Though they did say that It was possible to create a US account with the same apple ID. I tried it but when I try to register a US account, in the end it says that the apple ID is taken.
    Can anyone help?
    Thanks.

    You can't use the same ID because it is possible to change countries on accounts.  The other person using your ID is you!  However, technically you can only use the store in a country if you are actually present in the country, and you have to have a credit card billed to an address in the country as proof.
    I guess the person at Apple isn't familiar with hte details of thir own legal documents, and you would either have to try to change country on your account (which may run into issues) or start a second account in hte other country (which again may not be easy, nor legal).
    The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store.  You are also restricted to waiting 90 days between country changes.
    E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE
    Find somebody you know in the USA and give them a nice present.

  • Is it possible to create a Clone database with the same name of source db ?

    Is it possible to create a Clone database with the same name of source db using RMAN ...
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

    user11919409 wrote:
    Is it possible to create a Clone database with the same name of source db using RMAN ...
    yes
    >
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
    Handle:     user11919409
    Status Level:     Newbie (10)
    Registered:     Dec 7, 2009
    Total Posts:     102
    Total Questions:     28 (22 unresolved)
    why do you waste time here when you rarely get any answers to your questions?

  • Create a dir if there exists a file with the same name

    Hi..
    I want to create a directory with file.mkdir(). But I recognize a problem when there is allready a File with the same name.
    Is there any solution to handle a dir and a file with the same name?
    eg: Dir "C:\Windows" and File "C:\Windows"
    wami

    This explains it... use "java Test2 asdsfd" for example. While this example doesn't show it,
    if you try to create a dir with another slash on it c:\blah\ , it still can't be done.
    import java.io.*;
    public class Test2
    public static void main (String args[]) throws Exception
         if (args.length < 1){
         System.out.println("Test2 [name]");
         System.out.println("creating bogus file " +args[0]);
         FileOutputStream fo = new FileOutputStream(args[0]);
         fo.write(55);
         fo.write(55);
         fo.write(55);
         fo.close();
         File x = new File(args[0]);
         if (x.mkdir()) System.out.println("made dir " + args[0]);
         else System.out.println("failed to make dir " + args[0]);
         System.out.println("deleting file " + args[0]);
         x.delete();
         if (x.mkdir()) System.out.println("made dir " + args[0]);
         else System.out.println("failed to make dir " + args[0] + " again !");
    }

  • I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

    I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

    I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

  • How to create reports servers with the same name in two nodes in Reports

    Greetings
    We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
    Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
    Thanks
    Ramiro Ortiz.

    Hello.
    I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
    When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
    osfind: Found 2 agents at port 14000
    HOST: SNMVBOGOAS10.sena.red
    HOST: SNMVBOGOAS09.sena.red
    osfind: There are no OADs running on in your domain.
    osfind: There are no Object Implementations registered with OADs.
    osfind: Following are the list of Implementations started manually.
    HOST: SNMVBOGOAS10.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep2
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep2
    HOST: SNMVBOGOAS09.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep
    Any Ideas?

  • I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

  • Newbie :  How can i create 2 users with the same name on diff domain name ?

    I have two domains on my server
    exemple1.com
    exemple2.com
    and i want to create one user for each domain with the same name
    [email protected] and [email protected]
    curently i can create one user, and it's the same user for both domains :-/
    how ?
    thanks
    Hète

    I must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?

Maybe you are looking for