Creating A Sub-Mix?

Hello Everyone,
I am pretty much a novice in Logic 7.I know that it is possible to create a submix(the same tracks in the song with a different master effect) of the current track that I am working on. This is my objective:
I have 4 vocal audio tracks and 8 Midi Instr. Tracks. I want my tracks in an 8 bar long low pass/next door sound type effect with Reason Flatblaster as the into and I want it to fade/or transition the same tracks into the original sound for the rest of the track. Is it possible to create a sub mix and not have to bus each track into the effect and automate the level of effect to transition. Also if i can create a sub mix, do i have to copy my original tracks and if so how do i do it?
Any advice would help greatly. thank you for your time. Also if you have you feel I need to make my objective more clear....I can explain more if you let me know. Thanks Again
-Adam Bartolomeo
Dual 1.8Ghz Power Mac G5 Mac OS X (10.3.7) Logic 7

Unless I need to save screen space or processing power, I will build a sub mix using the busses.
So I want to filter the drums, and automate the filter over time:
- Send the output of the drumtracks to stereo bus 1
- Add the filter plugin to the bus
- Add the bus to the arrange window
- Automate the plugin
Or
I want to get a better perspective on my mix, it's all too much and I'm confused.
- Create 4 to 8 busses
- Assign the outputs of my various elements to stereo bus outputs
- - bus 1: drums
- - bus 2: bass
- - bus 3: atmosphere
- - bus 4: keyboad
- - bus 5: backing vocals
- - bus 6: lead vocals
- Mix the buses to get better imaging, and leveling.
Hope that makes sense, and helps at all...

Similar Messages

I am trying to group instruments together and send that to a sub mix. I can group them and attach a bus and it says that they are at sub mix 1 but the volume slider for the sub mix does not affect the recorded tracks.

I am trying to create a sub mix of several vocal tracks. I have highlighted the tracks and have assigned them to bus 1 (sub mix 1) but the sub mix slider does alter the loudness or softness of the track. I can move it up and down but nothing happens.

Make sure that the input for the Sub Mix track says Bus 1.

How can I create a sub-iTunes account for a teen?

how can I create a sub-iTunes account for a teen?
I need to separate our music libraries but still keep it under control from the main account (mine).

iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

How can I create a sub-folder within my "Documents" folder?

How can I create a sub-folder within my "Documents" folder? I have many similar documents that I want to group together. This will also un-clutter my Documents folder.

Also, you can add a New Folder button to the Finder's toolbar by opening Finder, going to the View menu in the menubar, selecting Customize Toolbar..., and dragging the New Folder icon to the toolbar in the Finder window. Then it's just one-click for new folders wherever you want them.

Page not found Error while creating new sub folder in the Sharepoint Document Library

Hi All,
I am a site collection administrator when i creating new sub folder under the folder in document library, am getting below error
"Page not found The
page you're looking for doesn't exist."
please help me, Thanks in advance!!
Srinivas

Hi Srinivas,
Please check ULS log for more useful information when this error occurs.
Please also check if this issue could be reprodued in other libraries, if not, you can use the new library instead.
Thanks
Daniel Yang
TechNet Community Support

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

I need a tool which i can create 3d subs

i need a tool which i can create 3d subs.
Does anyone know anything about this

Maybe this?
http://tritonsubs.com

Creating a Sub Cost Centre

Hello
Does anybody know how to create a sub cost centre. As in a cost centre which is part of/under another main cost centre.
I would be really greatfull if anybody can help.
Thank you
Regards
Bindi

You could use a statistical Internal Order for lower level analysis of a Cost Centre.
We use these for our Schools.
Each School has one Cost Centre eg: E10030
And then many Internal Orders which represent the departments eg:-
ECAT10030   Catering
EENG10030   English Dept
EMAT10030   Maths Dept
Some Schools have over 100 Internal Orders.
Validations ensure an Internal Order is always used with a School Cost Centre. No posting can take place against the Cost Centre alone.
Substituions enter the related Cost Centre for an Internal Order when creating a document.
The Cost Centre is held against the Internal Order in its Master Record.
Edited by: Amanda Byrne on Jul 26, 2010 1:26 PM

How to create a sub total and grand total using my query.

How can I create a sub total for each section and grand total for using my query like this. your help is appreciated. I am working with 9g
WITH BidItemsInformation AS
( SELECT DISTINCT q.iplineno "Line Number", q.section "Section Number",
         i.item "Item Number",
         initcap(i.idescr) "Description" ,
         i.iunits "Unit",
         q.qty "Quantity" ,q.price "Engineers Unit Price",
       (q.price * q.qty) "Engineers Estimate"
     FROM letprop l,
        proposal p,
        propitem q,
        bidlet b,
        bidtabs c,
        itemlist i,
        vendor v,
        bidders d
     WHERE(l.letting = b.letting
            And b.letting = c.letting
            And p.cspecyr = i.ispecyr)
            AND q.prpitem = i.item
            AND p.contid = l.lcontid
            AND q.contid = p.contid
            AND c.vendor = l.avendor
            AND l.CALL = c.CALL
            AND q.lineflag = c.lineflag
            AND q.iplineno = c.iplineno
            AND l.letting = d.letting
            AND c.letting = l.letting
            AND c.CALL = d.CALL
            AND v.vendor = d.vendor
            -- AND AND l.letstat = 'A'
            AND c.lineflag = 'L'
            AND l.letting ='&letting'
            AND l.CALL = '&call'
), BiddersInformation AS
-- This is where you make your changes for vendor name and vendor number Do not touch the above code
-- It is always the same for any call number and letting date
( SELECT IPLINENO "BLine Number",
        MAX(CASE WHEN VENDOR='K020' THEN bidprice ELSE NULL END) "K020:: Unit Price",
        MAX(CASE WHEN VENDOR='K020' THEN bidprice ELSE NULL END) K,
        MAX(CASE WHEN VENDOR='H438' THEN bidprice ELSE NULL END) "H438:: Unit Price",
        MAX(CASE WHEN VENDOR='H438' THEN bidprice ELSE NULL END) H,
        MAX(CASE WHEN VENDOR='U010' THEN bidprice ELSE NULL END) "U010:: Unit Price",
        MAX(CASE WHEN VENDOR='U010' THEN bidprice ELSE NULL END) U,
        MAX(CASE WHEN VENDOR='G110' THEN bidprice ELSE NULL END) "G110:: Unit Price",
        MAX(CASE WHEN VENDOR='G110' THEN bidprice ELSE NULL END) G,
        MAX(CASE WHEN VENDOR='H530' THEN bidprice ELSE NULL END) "H530:: Unit Price",
        MAX(CASE WHEN VENDOR='H530' THEN bidprice ELSE NULL END) H1
    FROM BIDTABS
    WHERE LETTING='&letting'
          AND CALL='&call'
          AND BIDPRICE <> 0
    GROUP BY IPLINENO
SELECT BidItemsInformation."Line Number",
       BidItemsInformation."Section Number",
       BidItemsInformation."Item Number",
       BidItemsInformation."Description",
       BidItemsInformation."Unit",
       BidItemsInformation."Quantity",
       BidItemsInformation."Engineers Unit Price",
       BidItemsInformation."Engineers Estimate",
       BiddersInformation."K020:: Unit Price",
        (BidItemsInformation."Quantity" * K) "KGM CONTRACTORS INC",
       BiddersInformation."H438:: Unit Price",
        (BidItemsInformation."Quantity" * H) "HOFFMAN CONSTRUCTION COMPAN",
       BiddersInformation."U010:: Unit Price",
        (BidItemsInformation."Quantity" * U) "ULLAND BROTHERS INC",
       BiddersInformation."G110:: Unit Price",
        (BidItemsInformation."Quantity" * G) "GLADEN CONSTRUCTION INC",
       BiddersInformation."H530:: Unit Price",
        (BidItemsInformation."Quantity" * H1) "HOOVER CONSTRUCTION CO"
FROM   BidItemsInformation,BiddersInformation
WHERE BidItemsInformation."Line Number" = BiddersInformation."BLine Number";
Line Number     Section Number     Item Number     Description     Unit     Quantity     Engineers Unit Price     Engineers Estimate     K020:: Unit Price
0010     0001     2011601/00003     Construction Surveying     LS      1     143,000     143,000     75,000     75,000     67,080     67,080
0013     0001     2013601/00010     Survey Equipment     LS      1     25,000     25,000     25,000     25,000     30,000     30,000
0020     0001     2015601/00030     Blast Monitor/Survey     LS      1     50,000     50,000     30,000     30,000     35,000     35,000
0030     0001     2021501/00010     Mobilization     LS      1     382,250     382,250     809,000     809,000     704,000     704,000
0040     0001     2021602/00010     Well Survey     EACH     60     500     30,000     2,150     129,000     1,600     96,000
0050     0001     2031501/00040     Field Office Type D     EACH     1     6,367     6,367     4,000     4,000     25,000     25,000
sub total:
1610     0002     2401501/01143     Structural Concrete (1a43)     C Y      46     350     16,100     408     18,768     400     18,400
1620     0002     2401501/01362     Structural Concrete (1c62)     C Y      68     200     13,600     204     13,872     200     13,600
1630     0002     2401501/03643     Structural Concrete (3y43)     C Y      60     600     36,000     592     35,520     580     34,800
1640     0002     2401512/03633     Bridge Slab Concrete (3y33)     S F      1,876     24     45,024     28     51,778     27     50,652
1650     0002     2401521/00030     Structure Excavation Class R     C Y      17     125     2,125     1,000     17,000     500     8,500
1660     0002     2401541/00010     Reinforcement Bars     LB      2,490     2     3,735     1     3,312     1     3,237
1670     0002     2401541/00011     Reinforcement Bars (Epoxy Coated)     LB      12,380     2     18,570     1     17,703     1     17,332
1680     0002     2401601/00010     Structure Excavation     LS      1     2,500     2,500     2,000     2,000     5,000     5,000
1690     0002     2402583/00020     Ornamental Metal Railing Type Special     L F      284     150     42,600     194     55,096     190     53,960
sub total
1820     0003     2401513/00346     Type Curb Railing Concrete (3y46)     L F      135     25     3,375     16     2,093     15     2,025
1830     0003     2401513/07447     Type Mod P-4 (Tl-4) Railing Conc (3y46)     L F      302     85     25,670     72     21,593     70     21,140
1840     0003     2401541/00010     Reinforcement Bars     LB      14,780     1     18,475     1     13,598     1     13,302
1850     0003     2401541/00011     Reinforcement Bars (Epoxy Coated)     LB      76,720     1     103,572     1     85,926     1     84,392
1860     0003     2401601/00010     Structure Excavation     LS      1     10,000     10,000     116,000     116,000     115,000     115,000
1870     0003     2402583/00020     Ornamental Metal Railing Type Special     L F      132     150     19,800     184     24,288     180     23,760
sub total
total

You can accomplish that using decode with the grouping function. It returns 1 when that column passed as argument was grouped (or is in some total) and 0 otherwise.
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> with t as
2 (select 'New York' city, 'US' country, 1 num from dual
3 union all select 'Los Angeles' city, 'US' country, 2 num from dual
4 union all select 'London' city, 'GB' country, 2 num from dual
5 union all select 'London' city, 'GB' country, 2 num from dual
6 union all select 'London' city, 'GB' country, 7 num from dual)
7 select decode(grouping(country), 0, country, 'GRAND TOTAL') country,
8         decode(grouping(city), 0, city, decode(grouping(country), 0, 'SUBTOTAL')) city,
9         sum(num) num_total
10   from t
11 group by rollup(country, city)
12 /
COUNTRY     CITY         NUM_TOTAL
GB          London              11
GB          SUBTOTAL            11
US          New York             1
US          Los Angeles          2
US          SUBTOTAL             3
GRAND TOTAL                     14
6 linhas selecionadas.
SQL>

How to create a Sub case in Adaptive case management.

Hi,
Can you please provide an example or more info about creating a sub case in Adaptive case management.
Documentation says
"Sub cases are deployed as a separate composite from the parent case project. They are linked to the parent using the case link mechanism. The sub case composite version is always the active version of the parent composite". This is exactly what I want.
I created a Sub Case following the steps mention in the documentation. It created it under the case activities. I want to know how to link it to a process or composite. In the advance section it specifies a project name and case name. How do I link it? Please help me with an example on how to create sub case.
ref:- https://docs.oracle.com/middleware/1213/bpm/bpm-develop/case_mgmt_bpmpd.htm#BPMPD87407
Thanks
Anil

On the Case UI within BPM workspace there should be a place to link cases.
Also have you looked at the following API ICaseInstanceService (Oracle Fusion Middleware BPM-Services Java API Reference for Oracle BPM Suite)
oracle.bpm.casemgmt.ICaseInstanceService
addCaseLinkboolean addCaseLink(IBPMContext context, CaseLink caseLink) throws CaseServiceExceptionAdd a case link
Parameters:
context - an IBPMContext value
caseIdentifier - a CaseIdentifier value
caseLink - a CaseLink value
Returns:
a boolean value
Throws:
CaseServiceException - if an error occurs

How to create a sub head(code) in a catalog- for service notification

Hi everyone,
How to create a sub head(code) in a catalog- for service notification?
Please guide with your valuable comments.
Please guide its very urgent.
Thanks and Regards
Edited by: MPVash Vash on Oct 24, 2008 8:14 AM
Edited by: MPVash Vash on Oct 30, 2008 7:38 AM

Hi,
Go to T-code QS41, give the catalog and code group and enter.
U can click on the code after selecting the code group and create new codes.
In SPRO u should see which type of catalog is assigned to the notification type. This u can see in the overview of the notification type by selecting the notification type in SPRO.
Regards
Haricharan

Creating New Sub-Folders on Inbox when connected to Exchange 2007

I am trying to figure out how I can add/create a new sub folder to my main Inbox using Mail 4.2 (1078)in Snow Leopard.I was able to do this in Entourage 2008 but can not seem to be able to do the same with Mail 4.2. Any help or clarification here would be great! We are looking at moving away from Entourage and updating all our Mac users to 10.6.3 and are currently testing the functionality of Mail 4.2. We connect to an 2007 Exchange Server.

I'm not sure what you mean by "create a sub folder in your main Inbox". If you mean you want to create a folder (aka Mailbox) in your Exchange account, just click the "+" button at the lower-left corner of the Mail window, select New Mailbox, set "Location" to be your Exchange account, and name the mailbox as you wish and click "OK".
If that's not what you mean, please post back and clarify.
Regards.

How do i create a Genius Mix (not a playlist)?, how do i create a Genius Mix (not a playlist)?

How do I create a Genius Mix (not a Genius playlist)?

http://ipod.about.com/od/ipodfeatures/ht/iphone_genius.htm

Create new sub-menu item....how???

Hi,
I have a site created with Dreamweaver templates.
I can create a new page from a template but i want to make
the page a sub-menu page.
For instance i have an 'about us' page and from this 'about
us' page i want to create a sub page. None os these areas have been
locked but i can't find a way to do it.
Is it possible?
am i missing something?
Any tutorials anywhere?
Thanks for any help
J

You'll probably want to make any menu changes (since the menu
may be an element that is present on all your pages...hence the use
of a template) in the non-editable regions in Dreamweaver, then
uploade the template and do a template update in Contribute
(Edit-->Format-->Template
Properties-->Apply-->OK-->Publish).
As a rule, your menu/navigation should be laid out in the
template prior to using the template to create new pages (not
exactly sure what you mean by "sub pages"). In other words, your
template navigation/menu determines the main navigation you want
available on EVERY page you create with the template. If you then
create a new page in Contribute using the template, you're free to
create links (in the editable regions) to any page you want
(existing or new), including pages that are already linked-to in
the menu.
Hope this helps!

Pro grammatically create three sub-folders with specific name under each of root folders in site collection level??

Hi,
i have a document library Named "Digital" in a site collection. In that document library i have bunch of customer folders with different customer name. My requirement is i need to create three sub-folders (like Images, Processed, Status) each of
customer folders. so how can i automate to create sub-folders with specific name. can i use object model or power shell to achieve this one.
Thanks in advanced!

Hi Murugesa,
Thanks for your help. i was trying to create folder inside document library using your code. but unfortunately i cant debug code and cannot create folder inside customers folder. Following is the code, basically i am creating a SharePoint project and adding
an item as class file and deploying to share point site and then trying to debugging code, but break-point showing as yellow circle. i checked solution has been deployed to the server but still not creating any folder. It will be very helpful if you can describe
all the steps. should i create console application?
Appreciated !!
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint;
namespace Add_Sub_Folders
class Create_Folders
public void Sub_Folders()
var foldersList = new List<string>();
SPSecurity.RunWithElevatedPrivileges(delegate()
try
using (var site = new SPSite(SPContext.Current.Site.Url.ToString()))
using (var web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
foreach (SPFolder folder in web.GetFolder("http://nyc01d1sptmp01:8080/Shared%20Documents/").SubFolders)
if (folder.Url.ToString() != "Shared Documents/Forms" && folder.Url.ToString() != "Shared Documents")
foldersList.Add(folder.Url);
SPFolder subFolder = web.GetFolder(folder.Url);
subFolder.SubFolders.Add("Draft");
subFolder.SubFolders.Add("Status");
subFolder.SubFolders.Add("Final");
folder.Update();
web.AllowUnsafeUpdates = false;
catch (Exception ex)
ex.Message.ToString();

Creating A Sub-Mix?

Similar Messages

Maybe you are looking for