Creating a transaction code for variant type in se93

hai all,
i created transaction's for dialogue type and report type,now i am trying to create transaction for variant type. in that what we have to provide in transaction text box where the f4 functionality is provided for that text box.
could any one plz help me out.
Thanks in Advance.

Hi,
U need to create transaction variant in SHD0 transaction before creation transaction by variant.
Go thru the following link carefully.
Certainly it will be helpful to you.
http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
Regards
Vadi

Similar Messages

  • How to create a transaction code for a function group with screen 100 as st

    Hello ,
    I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
    Customer asked me to create a transaction with the screen 100 as the starting screen.
    Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
    [ It is not a module pool program ].
    Thanks
    Prashanth.
    Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
    Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

    Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
    Name of screen field:                               Value
    D_SREPOVARI-REPORTTYPE                RW
    D_SREPOVARI-REPORT                        ZPCA
    Save and transport accordingly.

  • Create a Transaction code for a Report

    Hi
    I have created a report through report painter. How can i create a transaction code for the report.
    Thanks
    J

    Hi,
    T.Code: SE93 - Maintain Transaction
    Transaction Code = Zxxxxxx
    Click on Create.
    Short Text = Name of Report
    Click on the radio button for 'Transaction with Parameters'
    Press Enter.
    Transaction = GR55
    Parameters Window...
    Screen Field : Screen field can be viewed in technical information screen of the report group to which report belongs for which t.code is to created.
    Value: Report Group
    Click on Save.
    Now you have a custom transaction for the report(s) in a report group.
    Hope this helps.
    Please assign points to say thanks.

  • Creating a transaction code for Report Painter

    Hi all,
    I made a report using Report Painter and I need to create a transaction code for the report. Is there a way to create it in Report Painter or I have to do it with transaction SE93?
    Thanks is advance,
    Susanna
    Edited by: Susanna Gill on Sep 10, 2008 10:08 PM

    Simple,
    Go To Se93
    Give the Ztcode and press create
    select the last option (Transaction With parameters)
    In the next screen give transaction as START_REPORT
    Check the three GUI check boxes
    In the default values below give the following
    D_SREPOVARI-REPORTTYPE  :RW
    D_SREPOVARI-REPORT           :(Your Report Group)
    and you are done.

  • How to create a Transaction code for a Report Painter Report

    Hi All,
    Can any one let me know the procedure as to how to create a t-code for a user defined PCA report. I have created a PCA report (copied the existing report (8a26-001) and named it as zpca and assigned the same in a new Report Group ZPCA (the group is created by copying 8a26 group) and assigned it under the library 8a2. We have added few fields required by the user to the Z report.
    Now i need to create a transaction code for that zpca report. can anyone suggest how to go about it.
    Useful answers will be appropirately rewarded.
    regards,
    radhika

    Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
    Name of screen field:                               Value
    D_SREPOVARI-REPORTTYPE                RW
    D_SREPOVARI-REPORT                        ZPCA
    Save and transport accordingly.

  • Problems trying create a transaction code for TRM0 reports

    Hi all,
    I am trying to create a transaction code for reports created in TRM0 tool.
    I have selected parameters transaction and I have filled as following:
    Defaults values for transaction: TRM0
    Defaults values:
    Name of screen fields                      Value
    RKB1D-TABNAME                          VTVBARW_CFM
    RKB1D-REPID                                 ZTRMINT00001
    RKB1X-ASPET                                001
    And when execute my transaction code it show TRM0 transaction instead initial screen of ZTRMINT00001 report.
    Please could anybody have idea about this?
    Thanks in advance,
    Best Regards.
    Cristina Merino

    Thanks all of you for your help, finally I could find the solution:
    I have created a parameter transaction code as below:
    Tranx; START_REPORT
    Skip initial screen
    D_SREPOVARI-REPORTTYPE     RE
    D_SREPOVARI-EXTDREPORT     TRM 01VTVBARW_CFM                   ZTRMINT00001
    Best Regards.
    Cristina Merino.

  • How to create 2 transaction codes for same report program with diff title

    Hi All -
      I have created report program and create 2 transaction codes with different short description. I want to display the Tcodes decriptions instead of program attributes title.
    Can anyone pls tell me how to do this?
    Thanks,
    Kannan

    Hi Kannan,
    define 2 titlebars t1 and t2 for the report. In report initialization,
    IF sy-tcode = 't1'
      SET TITLE t1.
    ELSE.
      SET TITLE t2.
    ENDIF.
    Regards,
    Clemens

  • How to create Transaction code for Table Maintanance generator.?

    Hi,
    I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
    Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
    Thanks in advance.
    Best Regards,
    Paddu,

    Hi,
         Check the below steps......
    1. Go to Tcode u2018se93u2019.
    2. Select ' Transaction with parameters'.
    3. Then Transaction 'SM30' with click on skip initial screen
          VIEWNAME : XXX9tABLE NAME)
          UPDATE   : X
    4. Maintain the  Table maintenance generator
      Authorization group : &NC&
      Authorization object :
      Function group : name(xxx)
    Maintenance Screens :
    Maintenance type : One step
    Maint Screen No : Overview screen (2)
    If still u have problem I will send u steps with Screen shot ...send me Yr id.
    Regards,
    Biswanath

  • Create Transaction code for Area Menu with specific namesapce(/arba/ond_proc)

    Hi Friends,
    As I have created one Transaction Code For Area Menu with the namespace like (/arba/ond_proc).
    It is working fine when I run this with /n/atba/ond_proc.
    But When I ran this independently it's not working like:( /arba/ond_proc not working independently.)
    Please suggest me some solution.
    Thanks And regards
    Rahul Singh

    Hello
    when you excecute the query in right han side corner  you can get the program name
    go to se80 select program & type this name and then you can create a tcode for that prog in SE80
    reward points if helpful.
    the prog name will be something like : AQZZ/SAPQUERY/* " ur query name
    you can search for the name also in this manner

  • Create transaction code for WDA

    Hi experts,
    I am on SRM 5 and I need to create a transaction code for my custom webdynpro application so that this can be displayed on the SRM EBP.
    As there is no portal, I do not have the option to create an iview.
    Could someone please let me know if there is a way to do it.
    Thank you,
    Manish

    Manish,
    who ask you to create IVIEW for creating tcode ? First create TCODE for your component using my previous link( in this link , no need of creating iview). after that you can directly use that tcode on your srm system.
    After creating TCODE you can dispaly Tcode in normal browser , for this check this.
    http://www.****************/Tutorials/WebDynproABAP/TransactionCode/Index.htm
    from the above link you will get url, you can use that url directly in normal browser.
    Regards
    Srinivas

  • Transaction Code for Cost Center Report

    Hi everyone,
    using report painter I have created a cost center report which is a copy of a standard report. Now I would like to create a transaction code for this report which can be run from the menu.
    Can anyone explain step-by-step how to do this? I have already tried creating a TC for GR55 but this seems not to be what I want. I want the TC to start the report directly.
    Thanks in advance for your help!
    Regards,
    Martin

    Hi,
    Go to SE93 (create a new transaction), choose 'Transaction with parameters'. In the Transaction field put 'START_REPORT' and tick 'Skip Initial screen' flag. Tick all flags for GUI support and in the parameters section (below) type four parameters:
    D_SREPOVARI-REPORTTYPE = RW
    D_SREPOVARI-REPORT = (library of reports)
    D_SREPOVARI-VARIANT
    D_SREPOVARI-NOSELSCRN
    Regards,
    Eli

  • Transaction code for maintenance view

    Hi all
          I created a maintenance view and I also generated the table maintenance dailog for the view.Now I am changing the values using the transaction code SM30.But I have to create a transaction code for this maintenance view to access it and update the table instead of using sm30 for this purpose.Please help me.
    Thank You.
    Regards
    Giri.

    Hi
    create transaction using 'se93'
    select parameter transaction and give below attributes
    Transaction code ZTX1
    Transaction text Maintain View ZSDCZTVIEW
    Transaction SM30 Screen 0
    From module pool
    Name of screen field Value
    VIEWNAME = ZSDCZTVIEW
    UPDATE = X
    Thanks

  • Transaction code for custom table

    Hi there,
    I created one custom table. I created Tbale Maintenance Generator for this. I have to create transaction code for this table so that user can directly open this custom table in SM30. Can anybody suggest on this. is there any other way to do this so that user can directly open this custom table in SM30 mode?
    Regards,
    Zakir.

    Hi
    Check this link for creating a transaction code for a TM
    http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
    Please go throught below link ..... it was given with screen shots of the T.code Creating for the table after the maintaince view had been created ......
    http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    Regards
    Anji

  • Can we create the T-Code for a maintenace view

    Hi All,
    I have a table for which i create a maintence view . Now we want to create the Transaction code for that.Can it possible..?  if yes Plz help me .its very urgent .
    Thanks!
    Vipin Kumar

    Use TC SE93.
    Select option Create TC with Parameter.
    Enter TCode.
    In it maintain TC as SM30
    Click on Skip first screen
    Maintain Default Values as
    VIEWNAME = <View name>
    UPDATE = 'X'

  • What is TRANSACTION CODE for TRANSACTION VARIANTS?

    what is TRANSACTION CODE for TRANSACTION VARIANTS?
    please explain

    Hi..
    Goto Tcode: SHD0.
    Create a Transaction Variant :
      Name : ZTVAR1.
      Tcode: MK01
    Save the Settings of Screens as Screen Variants.
    Finally Save the Transaction variant.
    Goto Tcode: SE93.
    Create a Transaction code (Eg: Zmk01) of type Variant transaction.
    Assign ur Transaction variant here.
    Now Save and Execute ZMK01.
    <b>Reward if Helpful.</b>

Maybe you are looking for