Creating a transformation for delivered datasource 0TCTPRCSVAR_TEXT

Hi,
I am trying to set up my delivered technical content for the BI Administrator cockpit  (all the 0TCT... objects).  Everything is working well except for 4 datasources:
0TCTBWOBJCT_ATTR
0TCTBWOBJCT_TEXT
0TCTPRCSVAR_ATTR
0TCTPRCSVAR_TEXT
While all other datasources have installed as version 3.x with associated transfer rules, these datasources have installed as version 7.0 with no transformations.
I tried to create my own transformations, but for 0TCTPRCSVAR_TEXT there is no available field in the delivered data source to map to characteristic 0TCTPRCSTYP which is a compound of 0TCTPRCSVAR. 
If I can't load the text for this object then in the BI Administrator cockpit all my DTPs, Infopackages etc display the technical name rather than the text description.
I am running BW 7 patch 20 with BI_CONT 703 patch 13.
Has anybody else met this?  Can anyone recommend how I can fill the 0TCTPRCSTYP value in a transformation from 0TCTPRCSVAR_TEXT?
Thanks,
Sue

Hi,
All the above mentioned 4 datasources have 3.x flow shipped as a part of content.
go to tx: RSDS , enter the datasource name and from datasource tab at the top choose 'restore 3.x datasource'.
This will now make them contain 3.x dataflows .
and would therefore be loaded after scheduling them through process chains.
Rgds,
Chithra.

Similar Messages

  • Weblogic datasource - Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.

    I am performing some transactions with java application deployed on weblogic. I faced some issue of getting the transaction response with some delay. I found these below mention messages logged into the managed server logs. 
    Following is my datasource settings
    Initial Capacity: 2
    Maximum Capacity: 100
    Capacity Increment: 20
    Anyone have idea why these following errors coming.
    ####<Nov 26, 2013 2:25:41 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6BE1217D118A188C49> <> <1385457941513> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 2:25:42 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6EE1217D118A188C49> <> <1385457942413> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 2:25:43 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B71E1217D118A188C49> <> <1385457943792> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748434> <BEA-001128> <Connection for pool "DataSource" closed.>

    i know this,
    The cause of the problem is: owing to the client's operations staff to modify the datasource ,and reployed
    thinks

  • Creating Simple transformation for an XML data having deep structure

    Hi
    I have the following XML structure..
    <REQUESTS>
      <REQUESTNAME>REQ123</REQUESTNAME>
      <REQUESTID>1234</REQUESTID>
      <CITY>NEWYORK</CITY>
      <ZIPCODE>123456</ZIPCODE>
    <COMPETENCIES>
       <LANGUAGES>
         <COMPETENCY>
            <SKILL>SAP</SKILL>
            <PROFICIENCY>TEST</PROFICIENCY>
            <SKILL>JAVA</SKILL>
            <PROFICIENCY>TEST123</PROFICIENCY>
    (here we may have any number of records for SKILL&PROFICIENCY...)*
    </COMPETENCIES>
       </LANGUAGES>
         </COMPETENCY>
    </REQUESTS>
    My requirement is to read the above data from an URL and push it into an internal table.
    For this I'm trying to use Simple transformations but I'm facing difficulty in doing this.
    Can you pl. guide me how to create the transformation and the corresponding code for this.
    Best Regards
    Anil

    Hi
    Here is the actual XML structure..
    - <REQUEST>
      <COUNTRY />
      <ADDRESS />
      <CITY />
      <ASSIGNTYPE>IP</ASSIGNTYPE>
      <CHARGETYPE>CH</CHARGETYPE>
      <REMOTEALLOWED>Y</REMOTEALLOWED>
      <SALESRATE>EUR</SALESRATE>
      <SECURITY>NO</SECURITY>
      <TRAVELEXP>Y</TRAVELEXP>
      <MAXDAILYRATE />
      <CREDENTIALS />
      <EXPENDDATE />
      <NEWENDDATE />
      <NEWEXPENDDATE />
      <REPLYBEFORE>2010-11-30</REPLYBEFORE>
      <STARTDATE>2010-01-01</STARTDATE>
      <ENDDATE>2010-12-31</ENDDATE>
      <GCMTYPE>PM</GCMTYPE>
      <GCMLEVELFROM>02</GCMLEVELFROM>
      <GCMLEVELTO>08</GCMLEVELTO>
      <LOCATION>FR43</LOCATION>
      <MOBILITY>04</MOBILITY>
      <ZIPCODE />
    - <COMPETENCIES>
    - <LANGUAGES>
    - <COMPETENCY>
      <SKILL>01106034</SKILL>
      <PROFICIENCY>005103</PROFICIENCY>
      </COMPETENCY>
      </LANGUAGES>
    - <ACTIVITIES>
    - <COMPETENCY>
      <SKILL>01105500</SKILL>                            
      <PROFICIENCY>004507</PROFICIENCY>
      </COMPETENCY>
      </ACTIVITIES>
    - <BUSINESS>
    - <COMPETENCY>
      <SKILL>01105729</SKILL>
      <PROFICIENCY>004605</PROFICIENCY>
      </COMPETENCY>
      </BUSINESS>
    - <INDUSTRIES>
    - <COMPETENCY>
      <SKILL>01105491</SKILL>
      <PROFICIENCY>004901</PROFICIENCY>
      </COMPETENCY>
      </INDUSTRIES>
    - <METHODS>
    - <COMPETENCY>
      <SKILL>01105591</SKILL>
      <PROFICIENCY>004805</PROFICIENCY>
      </COMPETENCY>
      </METHODS>
    - <OFFERINGS>
    - <COMPETENCY>
      <SKILL>01105840</SKILL>
      <PROFICIENCY>005002</PROFICIENCY>
      </COMPETENCY>
      </OFFERINGS>
    - <PRODUCTS>
    - <COMPETENCY>
      <SKILL>01107304</SKILL>
      <PROFICIENCY>004703</PROFICIENCY>
      </COMPETENCY>
      </PRODUCTS>
      </COMPETENCIES>
      <CANDIDATES />
      </REQUEST>
    Here..... <SKILL></SKILL>   <PROFICIENCY></PROFICIENCY>  can be more than 1 entry...
    For this I have created a simple transformation like below..
    I have used the tcode 'XSLT_TOOL '..
    In SE11 I have created a Table type 'ZCOMPETENCIES' which is having  a line type 'ZLANGS'.
    ZLANGS is a structure which has another structure called 'ZCOMPETENCY' and this 'ZCOMPETENCY' is having fields
    SKILL & PROFICIENCY.
    I have used the wizard button which u can find  'XSLT_TOOL '.. and provided the table type ZCOMPETENCIES'  and it has automatically created the following transformation...
    <?sap.transform simple?>
    <tt:transform xmlns:tt="http://www.sap.com/transformation-templates" xmlns:ddic="http://www.sap.com/abapxml/types/dictionary" xmlns:def="http://www.sap.com/abapxml/types/defined">
      <tt:root name="ROOT" type="?"/>
      <tt:root name="COMPETENCIES" type="ddic:ZCOMPETENCIES"/>
      <tt:template>
        <COMPETENCIES>
          <tt:loop ref=".COMPETENCIES">
            <ZLANGS>
              <COMPETENCY>
                <SKILL tt:value-ref="COMPETENCY.SKILL"/>
                <PROF tt:value-ref="COMPETENCY.PROF"/>
              </COMPETENCY>
            </ZLANGS>
          </tt:loop>
        </COMPETENCIES>
      </tt:template>
    </tt:transform>
    I have written following code to get the data
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename                = gs_file
      CHANGING
        data_tab                = gt_itab
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        not_supported_by_gui    = 17
        error_no_gui            = 18
        OTHERS                  = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    GET REFERENCE OF gt_person INTO gs_result_xml-value.
    gs_result_xml-name = 'COMPETENCIES'.
    APPEND gs_result_xml TO gt_result_xml.
    TRY.
        CALL TRANSFORMATION ZTEST_TRAN
        SOURCE XML gt_itab
        RESULT (gt_result_xml).
      CATCH cx_root INTO gs_rif_ex.
        gs_var_text = gs_rif_ex->get_text( ).
        MESSAGE gs_var_text TYPE 'E'.
    ENDTRY.
    Please let me know if you need any further details..
    Best Regards
    Anil

  • Exception in creating XSLT transform for ESB Routing Service

    Hi,
    I am trying to create a Routing service in an ESB project. When I try to create the XSLT in a routing rule I get this error "Error while reading wsdl file esb:///ESB_projects/...../ship.wsdl ... Failed to read WSDL file at location esb:///ESB_projects/...../ship.wsdl . java.net.Socket Exception.
    I am able to create and register other adapter/soap services on the ESB server but not able to create this transform.Could anybody guide me as to how to resolve this?
    Regards,
    Sri

    The file doesn't physically exist on the server. If you explore the subfolders of the %OH%\integration\esb\oraesb folder, you'll see how ESB projects are deployed.

  • Creating a view for a datasource

    Hi experts,
    I'm kinda new in BW and ABAP, but I have a requirement to get a datasource that contains data between SAP Tables. The scenario should be like this :
    1. Get all Personal Number from PA9038 (Customized Infotype) within a period ( ENDDA & BEGDA as the parameters )
    2. Get only the last Cost Center each person has from PA0001-KOSTL
    3. Get only the last Assessment Value from PA9040 (Customized Infotype)
    Is there any way to create a view based on that scenario? I've tried using the create view via SE11 and I was confused about joining the tables to get only the last data from PA0001 and PA9040.
    Or is there any method to build a Fact Table that contains the data I need?
    PS:
    Actually if I used ABAP Commands, I can generate this data in Internal tables and joining them into one internal tables.
    Probably the ABAP Codes are like this :
    SELECT pernr endda begda
       FROM pa9038
       INTO   CORRESPONDING FIELDS OF TABLE itab1.
    IF NOT itab1[] is initial.
       SELECT pernr endda begda kostl
           FROM pa0001
              FOR ALL ENTRIES IN itab1
           INTO   CORRESPONDING FIELDS OF TABLE itab2.
    *For getting the last record I can manipulate the data in itab2 like this
    SORT itab2 BY pernr ASCENDING endda DESCENDING begda DESCENDING.
    DELETE ADJACENT DUPLICATES FROM itab2 COMPARING pernr.
    ENDIF.
    LOOP AT itab1.
        READ TABLE itab2.
    ...... and so on.
    ENDLOOP.
    Thanks for the help...

    Hi Febrain,
    Identify the base tables from where you can fetch the data from. Then Using those tables you create a VIEW. Using the view you create a generic Datasouce.
    Please use this url for more info..
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Regards

  • Creating a view for a datasource with KONP

    Hi.
    I have the many times discussed problem with the reference field in datasources are not possible. Most provided solution was to create a view on KONP and e.g. RV13A. But if I want do this I run into an error:  Table RV13A is not transparent
    Could someone give me a hind how to solve this? I found no article about that.
    Thanks in advance,
    Nils

    Hi.
    I ever done that with FM, but a view would be much easier sometime.
    Thanks for your replies, perhaps I will try to use an InfoSet, but to do it by FM would not be much complicated.
    THX Nils

  • Error while creating transformation for DSO in SAP BI

    While creating a transformation for DSO in SAP BI, I got an error "Data source xxx (FS_xxx) does not exist in version A". I would like to know what this error is all about and how to resolve this issue.
    Thanks.
    Bhusan

    Hi Bhusan,
    You have to activate your datasoure to make it as an ACTIVE version.
    SO in RSA1>Modelling>Datasouces--> find your datasource name and activate it first.
    Then create your transformation and continue with other steps.
    Hop it helps
    Regards,
    Arun.M.D

  • Error with "Creating Transformation for Master Data"

    Hi!
    I have the following error, when I try to create a transformation in SAP Solution Manager.
    Error analysis
    Short text of error message:
    Network could not be launched due to control error
    Long text of error message:
    Diagnosis
    Network control cannot be started either because is is not  installed on the front-end computer, or because the control  framework is inconsistent when the function is called up.  To be able to start the network graphic, you need two OCX files   that are delivered with the BW Frontend.
    System Response
    Processing has been terminated.
    Procedure
    Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
    installed on your computer. You can find notes on installing and
    checking the BW Frontend by searching for SAP Notes with the
    following key words:
      Version, sapservX, Setup, Patch, Installation, Frontend, BW,
      sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
       If the front end is installed correctly but the error still occurs,  contact SAP.
    Procedure for System Administration
    Technical information about the message:
    Message class....... "RSNG"
    Number.............. 001
    Variable 1.......... " "
    Thank you very much!
    regards
    Thom

    It seems like probably the installation is not proper.
    Or
    you don't have the SAP BW Data Flow Control for Administration Workbench installed in your system
    This is what i found
    wdbdadpt.ocx (SAP BW Data Flow Control for Administration Workbench) is a component from the software SAP BW Data Flow Control for Administration Workbench version 3020.6.21 by SAP AG, Walldorf. wdbdadpt.ocx version 3020.6.21 has a file size of 99,216 bytes, and is most commonly found under the directory "Controls" with a creation date of January 14, 2006
    Seems like some one else also got this issue
    Getting short dump in BI system, transaction RSA1
    Regards,
    Zaheer

  • How to create msi with transform for zfdagent

    As technicians in our organisation we are given the zfdagent.msi to
    install, each time we have to laboriously enter all the required
    organisation specific installation parameters........in short how can we
    create a transform/answer file package to make life easier :-)

    thanks for the reply, I had looked at that but as us mere technicians have
    no access to server-side info it was kinda confusing etc, I have however
    downloaded an evaluation copy of a software package that did this no
    problem :-), I knew that with MS Office etc creating transform files etc
    was relatively trivial and that surely this should be not a huge hassle
    with the agent. Many thanks for your reply , Ian

  • How to solve the problem "cannot create a datasink for **(datasource)"

    There is a forums that can send and receive RTP streams, and it can play on the client. Now I want to save it. I write the code according to the jmf2_0-guide, how ever it always throws the exception "cannot create a datasink for **(datasource)". The datasource is the RTP stream received from the server. Is there anything wrong with the data source or anything else?
    here is the code:
    public synchronized void update( ReceiveStreamEvent evt){
    if(evt instanceof NewReceiveStreamEvent){
    try{
    stream = ((NewReceiveStreamEvent)evt).getReceiveStream();
    DataSource ds = stream.getDataSource();
    MediaLocator f = new MediaLocator("file://foo.au");
    Manager.createDataSink(ds, f);
    RTPControl ctl = (RTPControl)ds.getControl("javax.media.rtp.RTPControl");
    if (ctl != null) {
         System.err.println(" - Recevied new RTP stream: " + ctl.getFormat());
         } else {
         System.err.println(" - Recevied new RTP stream");
         if (participant == null) {
         System.err.println(" The sender of this stream had yet to be identified.");
         } else {
         System.err.println(" The stream comes from: " + participant.getCNAME());
         // create a player by passing datasource to the Media Manager
         Player p = javax.media.Manager.createPlayer(ds);
         if (p == null) {
         return;
         p.addControllerListener(this);
         p.realize();
         PlayerWindow pw = new PlayerWindow(p, stream);
         playerWindows.addElement(pw);
         // Notify intialize() that a new stream had arrived.
         synchronized (dataSync) {
         dataReceived = true;
         dataSync.notifyAll();
         } catch (Exception e) {
         System.err.println("NewReceiveStreamEvent exception " + e.getMessage());
         return;
    Does any one know how to solve this problem? How to save or how to create a datasink? Please help! Thank you!!

    The complete error message:
    NewReceiveStreamEvent exception Cannot find a DataSink for: com.sun.media.protocol.rtp.DataSource@4741d6

  • Predefined transformations for drop/create index?

    Hi,
    I want to add pre/postmap transformations for dropping/recreating indexes in the target table, for performance reasons.
    I can't find any predefined transformations for this (such as WB_DISABLE/ENABLE_ALL_CONSTRAINTS for constraints). It seems I have to program this myself (dynamic PL/SQL for reuse with other tables seems the logical choice), but it seems such a dumb oversight - has Oracle really not supplied predefined transformations for this? It must be an extremely common need in ETL?
    Regards,
    Kai Quale
    University of Oslo

    On further thought, one needs more information than the table name to (re)create an index. (That's actually one of my pet peeves against Oracle - that you can't enable/disable indexes in the same way as constraints.)
    Offhand, the only solution I see is to store index metainformation in a separate table, write custom procedures for disabling FKs/dropping indexes and enabling FKs/creating indexes, using the metatable.
    It is a pretty common task in data warehousing - disable FK/drop index => run mapping => enable FK/create index. How do people do this in OWB?
    Regards,
    Kai

  • Error while activating transformation for a infocube.

    hi experts,
    This is Lalitha.I am new to BI7.
    I am trying to load data from flatfile into infocube.I have loaded master data successfully.while creating datasource for transactional data i am getting warning  :External length specification will be ignored.
    Even then I was able to load data into PSA.Now i am trying to create transformation for the infocube, but I am getting a error :Conversion type missing
    and Field /BIC/IO_PRC9 must be assigned to an InfoObject
    I have mentioned the infoObjects for datasource in the fields tab.
    Any suggestions will be appreciated.
    Thanks in advance.
    regards,
    Lalitha

    Hi,
    Some times we have to assign manually as system does not create automatically 1:1 rule in some cases which i don't know.
    Click on = at transformation and you will get the window, Under assign objects you can assign required fields to target field. this will clear your second error.
    For first error -
    If conversion type is missed for Price object. - Did you create the Price KF with Fixed currency or 0currency. if it is 0currency, in source system you should have one extra field with the units for Price field. As per iam concerned, If it is fixed currency it should activate - delete that particular transformation and recreate it.
    Thats what i used to do. i got the result.
    Have a fun
    Cheers,
    Shrinu

  • Attempt to create a transformation results in error "transf. does not exist

    Hello,
    We're using BI 7.0 in my dept. I have a Data Store Object that I want to connect with a transformation to my DataSource. All objects are BI 7.0 objects, not 3.x. I right click my DataSource and select "create transformation" - as described in the BI documentation. I enter my DSO object as destination in the pop-up. As soon as I click on "execute" to confirm all entries in the pop-up, I get the error message "transformation does not exist, see long text". In the long text I find "The transformation specified by transformation ID , source  and target , does not exist.". Well - of course my transformation doesn't exist yet, I wanted to create it! Does anyone share my unfortunate experience and found a way out?
    Thanks for any tips you can give me! Annette

    hi annette,
    this is 1 of the possibility. i replicated the issue in my system and this is what i found out...
    when you or whoever replicated the system (r/3 system connected with bw) he/she must have replicated the datasource as a 3x version and NOT as a 7x version. if that's the case, then you must have infosource inbetween (as 3x object you can't connect directly with datasource) and update rules (no transformation works). if that's what happened... then system will not allow you to create a transformation and will give you that error message. so please check if the datasource from r/3 got replicated properly (you have 2 options... replicate as 3x object OR replicate as datasource object 7x)
    hope this helps...
    regards,
    sameer

  • Error when creating a Transformation

    Hi BI pros,
    I want to create a transformation between an InfoObject (ZVO_MAT) and DataSource (Z_VO_MAT_ATTR).
    So, II tried to create the transformation by the following below:-
    > Right clicking the DataSource (Z_VO_MAT_ATTR)
    > select Create Transformation
    > a 'Create Transformation - Pop-up window'
    In the 'Create Transformation Pop-up window', below are what I select and entered::-
    Target of the Transformation
    Object Type: InfoObject
    Subtype of Object: Attribute
    Name: ZVO_MAT
    Source of the Transformation
    Object Type: DataSource
    DataSource: Z_VO_MAT_ATTR
    Source System: ER1CLNT100
    However, when I click on the 'green tick', it display error message: InfoObject ZVO_MAT not assigned to an InfoArea
    I have checked InfoObject: ZVO_MAT and I am sure it's under an InfoArea (Z_VI_IA).
    I don't know what is the reason for the error message to display.
    Please help.
    Many Thanks,
    Vince
    I found out how to fix it, thanks anyway!
    Edited by: Vincent Ong on Jun 10, 2010 9:35 AM

    Hi,
    Open the info object and check if you have marked "Characteristic is info provider" and assign the info provider below it .
    Save and activate it and try.It should work.
    - Jaimin

  • Transformations for 0IC_C03

    Hi Guys,
    We are doing a new BI 7.0 implementation and we are on Support pak 13.
    In BW3.5,for the 0IC_C03(2lis_03_bf/um) cube we have lot of complicated update rules.
    As in BI 7.0 we are using transformations instead of Transfer/Update rules, how do i get all those complex update rules.
    Please do advise me from the below three options or do advise.
    1.Do i need to copy the code from some other system and paste them manually into my transformations
    2.Is it better to go with Transfer / Update rules instead of Transformations
    3.First do Transfer / update rules and then migrate to Transformations.
    Please do advise.
    Thank you,
    PVK

    Hi PVK,
    What we are following in my project
    Before...migrating Datasource  and starting development.
    1) First activate business content of 0IC_C03 (Update Rule and IS and Transfer Rule).
    2) Make a doc which will work as backup for Update Rule and Transfer Rule Mapping.
    (Take a Backup of BW 3.5)
    3) Then Migrate your DS, with Export, and storing that in one Transport request.
    4) Then Create a Transformation from DS to Infosource(Z* template as 2lis_02_BF) and write all transfer rule Routines manually and convert them into OO Objects refering to code(back from Doc) .
    5) The Create a Transformation from Infosource to Cube 0IC_C03 and write all update rule Routines manually and convert them into OO Objects refering to code(back from Doc) .
    6) Then Create a DTP to Load from DS to 0IC_C03.
    Making a Doc(step2) is very tedious, but we have to do it.
    Regards,
    San!

Maybe you are looking for