Creating a Vdisk and getting an error.
Hi, I'm trying to study for a test on Windows 7 and I'm trying to install a Virtual disk and I keep getting the same error. The drive has been "cleaned" using the diskpart utility and is a 300 gb drive. here is the code that I used and the error
as copied from the command prompt. Any help would be great Thanks!!!!!!
DISKPART> create vdisk file="C:\test\disk1.vhd" maximum=24000
DiskPart has encountered an error: The system cannot find the path specified.
See the System Event Log for more information.
If I am understanding you correctly.
You are attempting to configure a VHD on a clean hard disk.
If that is the case,
First you need to create a primary partition because the vhd has to live in a partition.
Once created you will need to format the partition then assign it a letter.
diskpart:
select disk *number*
create partition primary
format fs=ntfs label=VHD quick
assign letter=s
I always recommend anytime you are working with partitions that are not actually housing the OS files that you label them a different letter so you don't get confused.
Thanks
Sean
MCTS: Windows 7
MCITP: Windows 7 Enterprise Administration
MCSA: Windows 7
Similar Messages
-
I reinstalled X pro on my newish computer and get appcrash error message - how do i fix? bill
I reinstalled my acrobat X pro in my new computer and when I try to open it I get the APPRASH error message. I cannot print documents from word 7 to acrobat either and the acrobat printer doesn't show on my printer selection. I downloaded Acrobat reader 11 and it will not read pdf documents. How do I fix? Bill
here's the error message i get in reader 11
Problem signature:
Problem Event Name: BEX
Application Name: AcroRd32.exe
Application Version: 11.0.7.79
Application Timestamp: 536b80b0
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0050005c
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e7
my word program is officei home and business 2010
In a message dated 5/20/2014 12:48:18 P.M. Eastern Daylight Time,
[email protected] writes:
i reinstalled X pro on my newish computer and get appcrash error message -
how do i fix? bill
created by Test Screen Name
(https://forums.adobe.com/people/TestScreenName) in Acrobat Installation & Update Issues - _View the full
discussion_ (https://forums.adobe.com/message/6394814#6394814) -
When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened." I don't want to lose hours of work; has anyone else encountered this?
A few general trouble shooting tips that may apply here:
1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
Restart Pages and attempt to open one of the files.
If all is well, Trash the plist file and empty the Trash.
If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
Regards,
Barry -
Slow processing and getting opening errors/warnings
I've modified the PDF Binder sample to get a plugin that would open PDF's and Tif files, and save them as PDF/A-1b (code below).
It's working. The problem: it's processing too slow (compared with the Actions batch processing)... and I've been getting warnings/and errors about "The imput file is corrupt or of an unknown/unsupported type" type. This is stopping my batch process until I click OK, and the it continues.
I am trying to process a few thousand of tif files now. I tried first to use the Batch processing capability built in the Acrobat X... an it works, but only with the first 255 documents in the folder... then gives an "insufficient disk space" message for the rest of the files in the directory.
So, 2 questions: Does anyone knows why it is so slow processing the tiff files and... how I can make my code "silent" so it does not wait for the OK after the message??
Thanks in advance.
The code:
ADOBE SYSTEMS INCORPORATED
Copyright (C) 1998-2006 Adobe Systems Incorporated
All rights reserved.
NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source other
than Adobe, then your use, modification, or distribution of it
requires the prior written permission of Adobe.
\file PDFBinder.cpp
- Implements a method to convert multiple files into PDFs and bind the PDFs
into one PDF file. The code shows how to use AVConversionToPDFHandler to
convert files to PDF and how to use PDDocInsertPages() to combind PDF files.
// Headers.
#include <stdio.h>
#include <ctype.h>
#ifndef MAC_PLATFORM
#include <direct.h>
#include "PIHeaders.h"
#endif
// Defines ----------
// Define this flag to show AVConversionToPDFEnumHandler info. in log file.
#define SHOW_TOPDF_HANDLER_TYPES
// define this flag to use file type filter
#define USE_FILE_FILTER
Constants/Declarations
// Message display control. Ture: display
ASBool bEcho = true;
// File location. User can change the following filenames.
#if WIN_PLATFORM
const char* STRING_PDFBinderFolder = "C:\\Fairfax\\Adobe\\in";
const char* STRING_PDFOutputFolder = "C:\\Fairfax\\Adobe\\PDFA";
const char* FOLDERSYMBOL="\\";
#endif
#if MAC_PLATFORM
const char* STRING_PDFBinderFolder = "/PDFBinder";
const char* FOLDERSYMBOL="/";
#endif
char* OutputPdfFileName = "PDFBinderOutput.pdf";
char* LogFileName = "PDFProcessLog.txt";
static ASInt32 gNumToPDFExt;
static ASInt32 gNumFromPDFExt;
static AVConversionFromPDFHandler RightHandler;
const int MAX_FILENAME_LENGTH = 256;
char sLogFileName[MAX_FILENAME_LENGTH];
// Filter -----------
// Filter is a list of file types which can be converted to PDF in this program.
// Use a filter may fit user's specific needs and ensure a smooth automation process.
// Of course, the user can turn off the filter in two ways:
// (1) gPDFBinderFileFilter = "";
// (2) comment out //USE_FILE_FILTER
// The filter should be consistent with the Acrobat viewer's menu capability:
// Create PDF from multiple files ...
// Here we put the types which have been tested, but user can expand it.
const char* gPDFBinderFileFilter = "pdf,tif,tiff,PDF,TIF,TIFF";
const int MAX_STRING_LENGTH = 2048;
AVConversionToPDFHandler gHandler;
// functions in this file.
int ConvertAndInsertFileToPDF(ASPathName aspItem, char* aFileName, PDDoc PDFfile);
void BindingFileToPDF(ASPathName aPathName, char* aFilename, ASFileSysItemPropsRec nFileAttrb, PDDoc targetPDdDoc, ASPathName outputPathName, int *ipTotal, int *ipConverted);
ASBool PassPDFBinderFileFilter(char* filename);
int ConvertAndSavePDFInTargetFolder(ASPathName aPathName, char* aFileName, PDDoc PDFfile, ASPathName outputPathName);
char* NewFileName(char *& aFileName);
// callbacks
ACCB1 ASBool ACCB2 MyAVConversionToPDFEnumProc(AVConversionToPDFHandler handler, AVConversionEnumProcData data);
ACCB1 ASBool ACCB2 AVConversionToPDFEnumFindHandler(AVConversionToPDFHandler handler, AVConversionEnumProcData data);
static ACCB1 ASBool ACCB2 myAVConversionFromPDFEnumProc(AVConversionFromPDFHandler handler, AVConversionEnumProcData data);
Implementation
/** This sample implements a method to convert multiple files into PDF
and bind the PDFs into one PDF file .
This sample shows developers how to grammatically implement To-PDF file
converson functionality. Basically, the code uses AVConversionToPDFHandler
to convert files to PDF and PDDocInsertPages()to combine PDF files.
This plug-in is designed to run from a menu item, and by setting bEcho = false
it may be run without any graphics user interface on the screen. Therefore, it
can be executed from other programs such as C IAC, VB IAC, and JavaScript
to meet enterprise workflow needs.
How to run it :
- This sample adds a menu item "PDF Binder" under the Acrobat SDK submenu. Two ways to
execute it: 1) click the menu item to run the program using a fixed file location
hard coded; 2) press the shift key and click the menu item to choose a folder where
files to be converted are located.
- Without folder selection, this original code is to convert and bind files in a
directory C\test\PDFBinder for Win, or a folder MacHD:test:PDFBinder for Mac.
You can copy the test files in the project's testfiles folder to the appropriate location
for testing. You may locate files to be converted in another directory/folder, and
specify the location in the string variable PDFBinderFolder in the code.
- When you have the files to be converted ready in the specified location,
run Acrobat 6 menu Advanced->AcrobatSDK->PDF Binder to start the operation. There are
echo messages informing you of the operation start and end, but you can change and
rebuild the code to turn off the display on screen.
- An output file PDFBinderOutput.pdf in the same location is created
when the program succeeds. A text log file PDFBinderLog.txt in the same
location records the process and results.
- You can set bEch = false in the code to turn off any display on the screen.
This is necessary when you call the menu function from within other programs
of C IAC, VB IAC, JavaScript.
- An optional file filter is used to pre-process the files. The filter only allows
the files with predefined types to be processed. You can change the file type list
as you wish. Using a filter may ensure a smooth automation process, since you can put
only well-tested file types in the filter. To turn off the filter, you can set
gPDFBinderFileFilter = "" or not to define USE_FILE_FILTER
- Note this is a sample only, developers need to make further improvement for
their actual use. For example, you can set up a list of files to use the method for
the conversion and binding. And you can add code to handle special file types.
@see AVConversionConvertToPDFWithHandler
@see AVConversionEnumToPDFConverters
@see ASFileSysDestroyFolderIterator
@see PDDocOpen
@see PDDocClose
@see PDDocInsertPages
@see PDDocCreatePage
@see PDDocDeletePages
@see PDPageRelease
@see ASFileSysCreatePathName
@see ASFileSysFirstFolderItem
@see ASFileSysNextFolderItem
@see ASFileSysGetNameFromPath
@see ASFileSysReleasePath
ACCB1 void ACCB2 PDFBinderCommand(void*)
// if the menu item clicked with Shift key pressed down, go to interactive mode.
// let the user to choose a folder and process all the file in the folder.
ASText dispText = ASTextNew();
char PDFBinderFolder[MAX_STRING_LENGTH];
ASBool shiftKeyIsDown = ((AVSysGetModifiers() & AV_SHIFT) != 0);
if(shiftKeyIsDown) {
AVOpenSaveDialogParamsRec dialogParams;
// Configure the dialog box parameters.
memset (&dialogParams, 0, sizeof (AVOpenSaveDialogParamsRec));
dialogParams.size = sizeof(AVOpenSaveDialogParamsRec);
dialogParams.windowTitle = ASTextFromScriptText("Choose folder with files to bind",kASRomanScript);
dialogParams.flags |= kAVOpenSaveAllowForeignFileSystems;
dialogParams.initialFileSys = ASGetDefaultUnicodeFileSys();
ASPathName thePath;
ASFileSys fileSys;
AVAppBeginModal(NULL);
if(ASBoolToBool(AVAppChooseFolderDialog(&dialogParams, &fileSys, &thePath)) != true){
AVAppEndModal();
//AVAlertNote("Failed to select the folder");
return;
AVAppEndModal();
#ifdef WIN_PLATFORM
ASFileSysDisplayASTextFromPath(ASGetDefaultUnicodeFileSys(), thePath, dispText);
ASHostEncoding bestEnc = ASTextGetBestEncoding(dispText, (ASHostEncoding)PDGetHostEncoding());
strncpy(PDFBinderFolder, ASTextGetEncoded(dispText, bestEnc), MAX_STRING_LENGTH - 1);
#else
ASPlatformPath aspPath;
ASFileSysAcquirePlatformPath(fileSys, thePath, ASAtomFromString("POSIXPath"), &aspPath);
strncpy(PDFBinderFolder, (char *)ASPlatformPathGetPOSIXPathPtr(aspPath), MAX_STRING_LENGTH - 1);
ASFileSysReleasePlatformPath(fileSys, aspPath);
// remove extra path separator
char e = PDFBinderFolder[strlen(PDFBinderFolder)-1];
if(e == ':' || e == '/')
PDFBinderFolder[strlen(PDFBinderFolder)-1]='\0';
dispText = ASTextFromScriptText(PDFBinderFolder, kASEUnicodeScript);
#endif
ASFileSysReleasePath(fileSys, thePath);
// Otherwise, the hard coded file path will be used.
else {
strcpy(PDFBinderFolder, STRING_PDFBinderFolder);
dispText = ASTextFromScriptText(PDFBinderFolder, kASRomanScript);
// instruction message
char strMsg[MAX_STRING_LENGTH] = "";
sprintf(strMsg, "This function will convert and process Tiff and PDF files in the selected directory. ");
strcat(strMsg, " You need to copy your files in C:\\Fairfax\\Adobe\\in directory." );
strcat(strMsg, " Files will be processed into C:\\Fairfax\\Adobe\\PDFA directory." );
strcat(strMsg, " If you are ready, click OK to continue, or click Cancel to quit. " );
strcat(strMsg, " \nNote you can press down Shift key and click the menu item to have a folder selection. " );
strcat(strMsg, " \nNote you can turn off the echo message by setting bEcho = false and rebuild the code. " );
if(ASBoolToBool(bEcho)==true){
ASInt32 choice = AVAlert(ALERT_CAUTION, strMsg, "OK", "Cancel", NULL, true);
if(choice==2) {
return;
// create a new target pdf file with one empty page
PDDoc TargetPDF = PDDocCreate();
ASFixedRect mediaBox = { fixedZero, ASInt32ToFixed(792), ASInt32ToFixed(612), fixedZero };
PDPage emptyPage = PDDocCreatePage (TargetPDF, PDBeforeFirstPage, mediaBox);
PDPageRelease (emptyPage);
// get available headlers and set our file filter
char ValidExt[MAX_STRING_LENGTH];
memset(ValidExt, 0, MAX_STRING_LENGTH);
#ifdef SHOW_TOPDF_HANDLER_TYPES
// enumerate AVConversioToPDF handlers to get all available file
// types which can be converted to PDF.
AVConversionEnumToPDFConverters(MyAVConversionToPDFEnumProc, (AVConversionEnumProcData) ValidExt);
//AVAlertNote("Converters Defined");
//AVAlertNote(ValidExt);
//AVAlertNote(gPDFBinderFileFilter);
#endif
#ifdef USE_FILE_FILTER
// set File filter
strcpy(ValidExt, gPDFBinderFileFilter);
//AVAlertNote(ValidExt);
#endif
// process all files in the directory
int iNumFiles = 0;
int iNumFilesConverted = 0;
char* Done = "Converted";
char* NotDone = " - ";
char fileName[MAX_FILENAME_LENGTH+1];
ASFileSysItemPropsRec props;
ASFolderIterator iter;
ASPathName aspItem = NULL;
memset(&props, 0, sizeof(props));
props.size = sizeof(props);
//AVAlertNote("Props Defined");
ASPathName theFolder = NULL;
ASFileSys fileSys = NULL;
DURING
#ifdef WIN_PLATFORM
fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), dispText);
theFolder = ASFileSysCreatePathName (fileSys, ASAtomFromString("ASTextPath"), dispText, 0);
//AVAlertNote("FileSys and Folder Defined");
#else
fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("POSIXPath"), PDFBinderFolder);
theFolder = ASFileSysCreatePathName (fileSys,
ASAtomFromString("POSIXPath"), PDFBinderFolder, 0);
#endif
if (theFolder==NULL) {
//AVAlertNote("Fail to create ASPathName for the selected folder.");
E_RTRN_VOID
// Find first file in current directory
if((iter = ASFileSysFirstFolderItem(fileSys, theFolder, &props, &aspItem))==FALSE) {
//AVAlertNote("This is either an invalid folder or the folder contains no files.");
E_RTRN_VOID
ASFileSysReleasePath(fileSys, theFolder);
//AVAlertNote("Folder Released");
// get filename only
if(ASFileSysGetNameFromPath(fileSys, aspItem, fileName, sizeof(fileName))) {
E_RTRN_VOID
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(aspItem!=NULL) ASFileSysReleasePath(fileSys, aspItem);
if(theFolder!=NULL) ASFileSysReleasePath(fileSys, theFolder);
// display an error message.
if(ASBoolToBool(bEcho)==true) {
AVAlertNote (errorMsg);
return;
END_HANDLER
//AVAlertNote(fileName);
// go to binding if it's a valid type of file
if(props.type == kASFileSysFile && PassPDFBinderFileFilter(fileName)) {
char outFileName[] = "";
//strcat(outFileName, STRING_PDFOutputFolder);
//strcat(outFileName, FOLDERSYMBOL);
//strcat(outFileName, fileName);
strcat(outFileName, STRING_PDFOutputFolder);
strcat(outFileName, FOLDERSYMBOL);
strcat(outFileName, fileName);
//AVAlertNote(outFileName);
ASPathName outputFileName = ASFileSysCreatePathName (ASGetDefaultFileSys(), ASAtomFromString("Cstring"), outFileName, 0);
BindingFileToPDF(aspItem, fileName, props, TargetPDF, outputFileName ,&iNumFiles, &iNumFilesConverted);
//AVAlertNote("File Processed");
ASFileSysReleasePath(fileSys, aspItem);
// process all other files
while(ASFileSysNextFolderItem(fileSys, iter, &props, &aspItem)) {
// get filename only
if(ASFileSysGetNameFromPath(fileSys, aspItem, fileName, sizeof(fileName))) {
return;
// go to binding if it's a valid type of file
if(props.type == kASFileSysFile && PassPDFBinderFileFilter(fileName)) {
char outFileName[] = "";
//strcat(outFileName, STRING_PDFOutputFolder);
//strcat(outFileName, FOLDERSYMBOL);
//strcat(outFileName, fileName);
strcat(outFileName, STRING_PDFOutputFolder);
strcat(outFileName, FOLDERSYMBOL);
strcat(outFileName, fileName);
//AVAlertNote(outFileName);
ASPathName outputFileName = ASFileSysCreatePathName (ASGetDefaultFileSys(), ASAtomFromString("Cstring"), outFileName, 0);
BindingFileToPDF(aspItem, fileName, props, TargetPDF, outputFileName, &iNumFiles, &iNumFilesConverted);
//AVAlertNote("File Processed");
ASFileSysReleasePath(fileSys, aspItem);
ASPathName pdfPathName = NULL;
DURING
// close the findfile
ASFileSysDestroyFolderIterator(fileSys, iter);
// save and close the output pdf file
// create path
ASText pathText = ASTextNew();
ASTextCatMany(
pathText,
dispText,
ASTextFromScriptText(FOLDERSYMBOL, kASRomanScript),
ASTextFromScriptText(OutputPdfFileName, kASRomanScript),
NULL);
#ifdef WIN_PLATFORM
ASFileSys fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), pathText);
pdfPathName = ASFileSysCreatePathName (fileSys,
ASAtomFromString("ASTextPath"), pathText, 0);
#else
char path[MAX_STRING_LENGTH];
strncpy(path, ASTextGetEncoded(pathText,
ASTextGetBestEncoding(pathText, (ASHostEncoding)PDGetHostEncoding())), MAX_STRING_LENGTH - 1);
ASFileSys fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("POSIXPath"), path);
pdfPathName = ASFileSysCreatePathName (fileSys,
ASAtomFromString("POSIXPath"), path, 0);
#endif
if(pdfPathName==NULL) {
E_RTRN_VOID
// delete the empty page
if(PDDocGetNumPages(TargetPDF)>1) {
PDDocDeletePages (TargetPDF, 0,0,NULL, NULL);
// save
//PDDocSave (TargetPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized,
// pdfPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
PDDocClose (TargetPDF);
//ASFileSysReleasePath(fileSys, pdfPathName);
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(pdfPathName!=NULL) ASFileSysReleasePath(fileSys, pdfPathName);
// display an error message.
if(ASBoolToBool(bEcho)==true) {
AVAlertNote (errorMsg);
return;
END_HANDLER
// use this line to show the massage on screen if you need
//if(ASBoolToBool(bEcho)==true) {
AVAlertNote ("Folder Completed. PDF/A Output files generated.");
return;
/* ConvertAndInsertFileToPDF
/** Internal function \n
** Convert a file to PDF, then insert it to target PDF file.
** @param aFileName IN char string, filename.
** @param PDFfile IN/OUT PDDoc of the target PDF file.
** @return 0 if OK, 1 if failed.
int ConvertAndInsertFileToPDF(ASPathName aPathName, char* aFileName, PDDoc PDFfile)
PDDoc tempPDF;
char* Ext;
DURING
// get file extention
Ext = strrchr(aFileName,'.');
if(Ext) {
Ext++;
else {
E_RETURN (1);
// if the file is PDF, open PDDoc
if(strcmp(Ext,"PDF")==0 || strcmp(Ext,"pdf")==0) {
tempPDF = PDDocOpen (aPathName, ASGetDefaultFileSys(), NULL, true);
if(tempPDF==NULL) {
PDDocClose(tempPDF);
E_RETURN (1);
// else convert it to PDF
else
// let it automatically find right handler for the file and do the job.
AVConversionStatus stat = AVConversionConvertToPDF
(kAVConversionAsyncOkay, //kAVConversionNoFlags
aPathName, ASGetDefaultFileSys(), &tempPDF, NULL);
// check if successful
if(stat != kAVConversionSuccess) {
//AVAlertNote("Cannot convert the file.");
E_RETURN (1);
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
// display an error message.
if(ASBoolToBool(bEcho) == true) {
AVAlertNote (errorMsg);
return 1;
END_HANDLER
// insert new PDF into target PDF
DURING
// insert all pages of new pdfc to TargetPDFfile.
PDDocInsertPages(PDFfile, PDLastPage, tempPDF, 0,
PDAllPages, PDInsertAll, NULL, NULL, NULL, NULL);
PDDocClose(tempPDF);
HANDLER
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(ASBoolToBool(bEcho)==true) {
AVAlertNote(errorMsg);
END_HANDLER
if(strcmp(Ext,"doc")==0) {
char fname[40];
sprintf(fname,"%s.pdf",aFileName);
remove(fname);
return 0;
/* MyAVConversionToPDFEnumProc
/** Internal callback function \n
** called for every AVConversionToPDFHandler.
** get the valid type (file extention) for the conversion.
** @return true.
ACCB1 ASBool ACCB2 MyAVConversionToPDFEnumProc(AVConversionToPDFHandler handler,
AVConversionEnumProcData data)
ASUns16 numFileExt = handler->convFilter.numFileDescs;
for (int i = 0; i < numFileExt; i++) {
char* ext = handler->convFilter.fileDescs[i].extension;
if(strlen(ext)>0) {
strcat((char*) data, ext);
strcat((char*) data, ",");
return true;
/* this is alternative code to get right conversion handler for a specific file
to be converted. It works with function AVConversionConvertToPDFWithHandler.
It's not used now, but kept for user's reference.
ACCB1 ASBool ACCB2 AVConversionToPDFEnumFindHandler(AVConversionToPDFHandler handler,
AVConversionEnumProcData data)
ASUns16 numFileExt = handler->convFilter.numFileDescs;
for ( int i = 0; i < numFileExt; i++)
char* ext = handler->convFilter.fileDescs[i].extension;
if(strlen(ext)) {
if(!strcmp((char*) data, ext)) {
gHandler = handler;
return false;
return true;
/* BindingFileToPDF
/** Internal callback function for binding process \n
** IN: char* aFilename, ASFileSysItemPropsRec nFileAttrb \n
** PDDoc targetPDdDoc, int *ipTotal, \n
** int *ipConverted, FILE *logfile \n
** OUT: int *ipTotal, int *ipConverted. \n
void BindingFileToPDF(ASPathName aPathName, char* aFilename, ASFileSysItemPropsRec nFileAttrb, PDDoc targetPDdDoc, ASPathName outputPathName, int *ipTotal, int *ipConverted)
// ignore system, hidden files, and our target PDF and log file.
if( nFileAttrb.isHidden
|| (strcmp(aFilename,".")==0) || (strcmp(aFilename,".." )==0)
|| (strcmp(aFilename,OutputPdfFileName)==0) || (strcmp(aFilename,LogFileName)==0)) {
return;
(*ipTotal)++;
char msg[MAX_STRING_LENGTH] = "";
char* Done = "Converted";
char* NotDone = " - ";
// try to convert and insert it to target PDF file.
// rc would be 0 for success, otherwise 1.
int rc = ConvertAndSavePDFInTargetFolder(aPathName, aFilename, targetPDdDoc, outputPathName);
// if converted
if(rc==0) {
(*ipConverted)++;
/* PassPDFBinderFileFilter
/** Internal callback function for binding process
** @return true if the IN aFilename is a valid file for PDF conversion,
** otherwise false.
ASBool PassPDFBinderFileFilter(char* aFilename)
#ifdef USE_FILE_FILTER
// if the filter is empty, any file will pass.
if(strlen(gPDFBinderFileFilter)==0)
return true;
char* Ext = strrchr(aFilename,'.');
if(Ext!=NULL) {
Ext++;
if(strstr(gPDFBinderFileFilter, Ext)) {
return true;
return false;
#else
// not use filter, any file will pass.
return true;
#endif
/* ConvertAndInsertFileToPDF
/** Internal function \n
** Convert a file to PDF, then insert it to target PDF file.
** @param aFileName IN char string, filename.
** @param PDFfile IN/OUT PDDoc of the target PDF file.
** @return 0 if OK, 1 if failed.
int ConvertAndSavePDFInTargetFolder(ASPathName aPathName, char* aFileName, PDDoc PDFfile, ASPathName outputPathName)
PDDoc tempPDF;
char* Ext;
DURING
// get file extention
Ext = strrchr(aFileName,'.');
if(Ext) {
Ext++;
else {
E_RETURN (1);
// if the file is PDF, open PDDoc
if(strcmp(Ext,"PDF")==0 || strcmp(Ext,"pdf")==0) {
tempPDF = PDDocOpen (aPathName, ASGetDefaultFileSys(), NULL, true);
if(tempPDF==NULL) {
PDDocClose(tempPDF);
E_RETURN (1);
// else convert it to PDF
else
// let it automatically find right handler for the file and do the job.
AVConversionStatus stat = AVConversionConvertToPDF
(kAVConversionAsyncOkay, //kAVConversionNoFlags
aPathName, ASGetDefaultFileSys(), &tempPDF, NULL);
// check if successful
if(stat != kAVConversionSuccess) {
//AVAlertNote("Cannot convert the file.");
E_RETURN (1);
else {
//change Extension
ASText asTmp = ASTextNew();
ASFileSysDisplayASTextFromPath(ASGetDefaultUnicodeFileSys(), outputPathName, asTmp);
//AVAlertNote(ASTextGetScriptText(asTmp, kASRomanScript));
if(strcmp(Ext,"TIF")==0 || strcmp(Ext,"tif")==0){
ASTextReplace(asTmp, ASTextFromScriptText(".tif", kASRomanScript), ASTextFromScriptText(".pdf", kASRomanScript));
} else {
ASTextReplace(asTmp, ASTextFromScriptText(".tiff", kASRomanScript), ASTextFromScriptText(".pdf", kASRomanScript));
//AVAlertNote(ASTextGetScriptText(asTmp, kASRomanScript));
outputPathName = ASFileSysCreatePathName (ASGetDefaultUnicodeFileSys(), ASAtomFromString("ASTextPath"), asTmp, 0);
HANDLER
// exception handling
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
// display an error message.
if(ASBoolToBool(bEcho) == true) {
AVAlertNote (errorMsg);
return 1;
END_HANDLER
// Run OCR and Save new PDF into target PDF
DURING
// OCR
ASAtom cmdName;
AVCommand cmd;
cmdName=ASAtomFromString("PaperCapture");
cmd=AVCommandNew(cmdName);
ASCab config = ASCabNew();
ASCabPutInt (config, "UIPolicy", kAVCommandUISilent); //hide the interface
if (kAVCommandReady == AVCommandSetConfig (cmd, config)) {
//AVAlertNote("Config Ready");
ASCab inputs = ASCabNew();
ASCabPutPointer (inputs, kAVCommandKeyPDDoc, PDDoc, tempPDF, NULL);
if (kAVCommandReady == AVCommandSetInputs (cmd, inputs)) {
//AVAlertNote("Input Ready");
ASCabDestroy (inputs);
AVCommandStatus status = AVCommandExecute(cmd);
//switch (status) {
// case kAVCommandReady :
// AVAlertNote("Not working, but ready to work.");
// break;
// case kAVCommandWorking :
// AVAlertNote("Still working");
// break;
// case kAVCommandDone :
// AVAlertNote("Done working");
// break;
// case kAVCommandInError :
// AVAlertNote("In Error");
// break;
// case kAVCommandNotExecuted :
// AVAlertNote("Command not executed due to lack of objects on which the command to be executed");
// break;
AVCommandDestroy(cmd);
//Save
//PDDocSave (tempPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized, outputPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
//ClosePDF
//PDDocClose(tempPDF);
//Convert to PDF/A Compliance
//Select the right handler
AVConversionEnumFromPDFConverters(myAVConversionFromPDFEnumProc, NULL);
// do conversion
AVConversionStatus stat = AVConversionConvertFromPDFWithHandler(RightHandler, NULL, kAVConversionAsyncOkay, tempPDF, outputPathName, ASGetDefaultFileSys(), NULL);
// check the returned status and show message
//if (stat == kAVConversionSuccess)
// AVAlertNote( "The PDF/A file was saved in output folder." );
//else if (stat == kAVConversionFailed)
// AVAlertNote( "The PDF/A conversion failed." );
//else if (stat == kAVConversionSuccessAsync)
// AVAlertNote( "The conversion will continue asynchronously." );
//else if (stat == kAVConversionCancelled)
// AVAlertNote( "The conversion was cancelled." );
//Save
//PDDocSave (tempPDF, PDSaveFull | PDSaveCollectGarbage | PDSaveLinearized, outputPathName, ASGetDefaultUnicodeFileSys(), NULL, NULL);
//ClosePDF
PDDocClose(tempPDF);
ASFileSysReleasePath(ASGetDefaultFileSys(), outputPathName);
HANDLER
char errorMsg[256];
ASGetErrorString (ASGetExceptionErrorCode(), errorMsg, 256);
if(ASBoolToBool(bEcho)==true) {
AVAlertNote(errorMsg);
END_HANDLER
if(strcmp(Ext,"doc")==0) {
char fname[40];
sprintf(fname,"%s.pdf",aFileName);
remove(fname);
return 0;
//Select the appropiate handler for the PDF/A conversion
static ACCB1 ASBool ACCB2 myAVConversionFromPDFEnumProc(AVConversionFromPDFHandler handler, AVConversionEnumProcData data)
AVFileFilterRec filter = handler->convFilter;
ASUns16 numFileExt = filter.numFileDescs;
char *kUniqueID = handler->uniqueID;
// go through the conversion handlers to find a handler for PDF extension files and the unique key matches the PDF/A one.
for (ASInt32 i = 0; i < numFileExt; i++)
if (strlen(handler->convFilter.fileDescs[i].extension)>0)
// found it, fill in the handler and return false to stop going on.
if (!strcmp(handler->convFilter.fileDescs[i].extension, "pdf") && !strcmp(kUniqueID,"com.callas.preflight.pdfa")) {
RightHandler = handler;
return false ;
return true;There are some options for various APIs to run "kinda silent" - but again, Acrobat is designed for INTERACTIVE use…so "completely silent" isn't really an option.
As for speed – you'd need to be MUCH MORE specific about where your slow downs are. Have you profiled?
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 12 Dec 2011 07:39:08 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Slow processing and getting opening errors/warnings
Re: Slow processing and getting opening errors/warnings
created by FFX-ER<http://forums.adobe.com/people/FFX-ER> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4079175#4079175 -
When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459. Help!
but I tried that earlier and the same thing happened.
Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
Regards
TD -
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.
Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again. -
Hello,
I'm moving my library to an external hard drive.
I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
Any tips?
Thank you,
Greg H
iTunes 10.6.3OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks. -
Using Site Content and Structure unable to move documents,pages and getting weird error message
Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn| -
i just downloaded iTunes for my Windows 8 laptop and get an error message when i try to connect to the iTunes store (-3212)
Hello Steve,
Thank you for the details of the issue you are experiencing with the iTunes Store. I recommend the following steps for error (-3212):
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Find the full article at the following link:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thank you for using Apple Support Communities.
Best,
Sheila M. -
having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?
Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha -
I am trying to upgrade to iTunes 11.4 on my Windows7 PC and get an error message that says " iTunes has an invalid signature. It will not be installed" How do I fix that?
Hi curliejo,
Welcome to the Apple Support Communities!
In your situation I would recommend the steps in the following article for troubleshooting iTunes. It may be necessary to completely remove and reinstall iTunes in this situation. Be sure to remove all of the components with iTunes in the correct order as outlined in the article before installing fresh.
Issues installing iTunes or QuickTime for Windows
Have a great day,
Joe -
I have moved from the UK to the USA and have a new phone, I try to change my country location on the store and get an error message saying I have to cancel my itunes match and also that I have a pass incomplete, any ideas how to fix and change the store. It is becoming a problem with getting some USA aps and content
Thank you
TomiTunes match is a subscription that you have in when you were still in the UK. According to the terms & conditions you'll need to wait for the susbcription to end before you can change your country to iTunes Store USA.
-
I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on a link. HELP!! What's going on? This happened after I downloaded Chrome and then decided to delete it.
I have Lion and I just came across this link and it took care of the problem.
Jose Antonio Solis
Re: Lion: Delete google chrome completely include user profile?
Try deleting:
~Library/Application Support/Google
and
~Library/Caches/Google/Chrome -
Trying to download I tunes and get this error message Service " Apple Mobile Device" ( Apples Mobile Device) failed to start. Verify that you have sufficent privileges to start system services
See Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
All Open Applications Quitting Unexpectedly and Randomly
It started last night after I finally allowed App Store to install a bunch of OS X updates that it had wanted to install for quite some time. I'm not 100% sure but I believe one of those updates was for OS X 10.8.4 from 10.8.3 but I may be mistaken a
-
I recently purchased a MAc Book Pro and a Min-dvi to VGA to connect to an external monitor only to find it doesn't fit, am I correct in assuming I need a Mini display to VGA?
-
I removed Garageband for a time ago by draging the app from the applications folder to the trash. But now I want to install it again, and the setup says I allready got a version in the application folder, but its not there. Does anyone know how I can
-
BC4J : How do I move a jpx file?
I am experiencing great frustration trying to move a jpx file. It is currently being stored in the directory with the BC4J objects, I am trying to move it into a separate directory in order to keep it with the .jpr file. How do I move it? I have trie
-
Virtualbox no longer detects system theme
Hi. I just upgraded all the virtualbox packages. I replaced virtualbox-additions with virtualbox-iso-additions, and virtualbox-modules with virtualbox-host-modules <-- I think those were the replacements. There were two that pacman asked me about