Creating a warning banner at the login screen in solaris 10 GNOME

Does anyone know how to create a a warning banner at the login screen in solaris 10 GNOME so users have to hit OK or Enter before typing in their username?
A million thanks,
Johnny Mac

I have had problems after the 10.5.2 update. I ended up with a frozen computer - unable to restart or shut down etc. Also ended up at one stage with Set Up Assistant screen. With the help of a computer savvy friend, at least I am able to use my computer again.
It appears the actual download did happen but it did not install and the computer tells me I need to "re-start". When I did this, window appeared on plain blue screen saying it was installing software but absolutely nothing happened - no blue scrolling bar etc.
My iMac computer is still under Apple Care Plan and technician told me they are many problems surfacing across the various machines with this upgrade. He has asked me to delay updating the software and to ring back in a couple of days because their technicians are currently working on the problem and he hopes for an answer soon.

Similar Messages

I've created a new user but don't see it in the login screen

I've created a new user but don't see it in the login screen. Can somebody help?

Hi,
Before going further, I’d like to recommend you check if the address list is visible in OWA.
If yes, this issue occurs when the AddressBookRoots attribute of the Microsoft Exchange object does not have the same distinguished name value that is set in the All Address Lists attribute.
For more detail resolution, you can refer to the following article:
http://support.microsoft.com/kb/982351
Thanks,
Angela Shi
TechNet Community Support

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

My MacBook Pro is now asking for a login. When I enter my passcode, it goes to a blue screen and back to the login screen. I saw several older posts, but nothing recently. I am running Snow Leopard.

My MacBook is now asking for a password. When I login, it loops to a blue screen, and back to the login. Incorrect logins create a shaking of the login screen. I tried restarting with the shift key depressed, with no luck.

I performed a hard shutdown, and upon start I could access my system without logging on. I'm not sure what caused the issue, but I have not booted up in almost a week.

To add a check box in the login screen

Hi,
I need to put a check box in the login screen of CRM below the LOGON button with a message :'I agree with the terms and condition of the System'.
Please help.

See: Improve PDFs: Create interactive PDF checklists

On the login screen on my mac says a property name, the laptop changed hands and I'd like to change the property line name to my own, how do I do that?

On the login screen on my mac says a property name, the laptop changed hands and I'd like to change the property line name to my own, how do I do that?

Open Accounts preferences. Create a new user account with the name and username of your choosing as well as your own password. Be sure to give the new account Admin status. Log out of the old account and log into your new account. Now, delete the old account.

How suppress the 'login screen'

Am looking to find some code to suppress the login screen?
Could use some code suggestions?
Thanks...

Just create the page that you want to be your main page. View the page and then copy the URL like:
http://servername.com/servlet/page?_pageid=54&_dad=portal30&_schema=PORTAL30
Then open the httpd.conf file and do a find for Redirect.
Put the following:
Redirect /demo http://servername.com/servlet/page?_pageid=54&_dad=portal30&_schema=PORTAL30
Save httpd.conf and then restart the HTTPServer.
The page is now accessible with the following URL:
http://servername.com/demo
I would set the redirect using this type of format.
/demo http://severname.com/pls/portal30/url/page/main_page
As I have found the pages do not display portlets correctly, when the format you indicated is used.

Unable to access the login screen using web browser

Hi!
I have recently downloaded the peoplesoft HCM template from edelivery.oracle.com and created two virtual machines namely HCM-DB and PIA-APP. Now both the virtual machines are able to ping to each other but are unable to ping to the Oracle virtual server nor to the base machine on which the Oracle virtual manager is installed. Both the viirtual machine, the oracle vm server and oracle vm manager are in the same network 192.168.1.0.
Secondly if I am starting the database then the PIA server. Still I am unable to access the login screen using the following url:- http://nsoln.com:8000/ps/signon.html.
As, I am new to this field, any help would be a great asset for me to resolve the above issue.
Thanking you..
Yours Sincerely
Santosh

Check the server name in your httpd.conf file
(ORACLEHOME\Apache\Apache\conf\httpd.conf) and look to see if it is in capital letters. If it is edit it to lower case. Reboot.

Trying to work in iCloud on my PC....but iCloud keeps resetting to the login screen.

Trying to work in iCloud on my PC (Calendar, Notes, Email etc...) ....but iCloud keeps resetting to the login screen.
Anyone seeing similar behaviour?

To use iCloud, you must first set it up on an iOS device or a Mac.
Creating an iCloud account FAQ:
http://support.apple.com/kb/HT4436

When I boot up it hangs on the login screen for awhile, why?

I have a mid 2011 Macbook Air 13". It came with Lion but I recently updated to Mountain Lion. When I wake the laptop from sleep everything is fine. If it's been awhile since it slept (a couple of hours), the login screen hangs. What happens is that it boots like normal and looks like everything is correct, but it won't let me type in my password. After 10 seconds or so I can see a cursor come up but it won't let me type (but anything I do type at this point will later fill in the field after another 2-3 seconds or so). One other thing that's weird is that when the screen first comes up it shows the battery percentage from when I put it back on the charger, then after everything catches up, it changes to show 100%.
I hope I explained the problem well enough. Basicly a "wake from sleep" is fine if it hasn't been long since the laptop slept, but if it's been awhile it takes about 15-20 seconds to boot up.
Ideas?

Here are some suggestions based on my recent issue with unable to get Mavericks up after upgrade - The Apple geniuses just simply couldnt figure this one out...despite it being in their shop for 3 days (They probably did not look at it...and asked if they can just wipe out everything and install fresh...i had said NO):
Restart computer and hold Cmd+V when you hear chime. This will start the computer in Verbose mode.
See the messages and see where the system boot fails. In my case, it was some backtrace IOStorageFamily issue with com.paragon-software.
Google may be able to solve your Apple issues - just type the error message in and see if you get any useful suggestions. in most cases - this would be some faulty 3rd party drivers.....
In my case, it was something stupid i had probably installed....I had to boot to safe mode (Hold Shift at boot chime) - open Terminal, delete the folder com.paragon-software.kext from System/Library/Extensions....that fixed the problem. Mavericks is working great now....
Let me know if your debugging thing works...

My Mac starts up fine in safe mode, but freezes before the login screen in normal mode.

I have the 2012 MBP, 4 GB of RAM, 500GB HD, 2.5GHz Intel i5 processor. Everything worked fine, until one day it freezes all of a sudden. I shut down and restarted. The Apple logo appears with the loading animation underneath. A few moments later, the animation disappears, and the mouse cursor appears. This is normal. What's not normal is that it stays on this screen forever. I can't get to the login screen even after waiting sooo long. Even restarting 5 times only repeats this problem. I finally boot into safe mode. I am able to login and get to the desktop in safe mode, but not normal mode. Clearing every startup item in System Prefs, and in the startupitems folders does not solve the problem. Disk utility says no problems. Resetting PRAM does nothing. Can anyone please tell me what I should do next?

Do you hear the startup chimes?
If so, then the startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important files first before using OS X Recovery.
OS X Recovery does require a broadband high speed internet connection.

Imac 2008 Snow Leopard installed, Wont go past the login screen

Hello Everyone,
I am new to this so please bear with me.
I had been using my Imac lately just to run the sims 3 with extension packs which I played for about 10 minutes.
Today we had our internet connected as we have moved to a new house.
The Internet service provider has said the connection should be up and running today.
I went onto safari and checked two or three emails after that my mouse and keyboard could not do anything.
No force quit, No command based force quit, no relaunching of the finder, no being able to restart or shut it down at all.
I remember an echo back up mac thingy jumping up and down too in the dock if that helps
So I turned it off using the back button and left it off for 5 minutes. The mouse and Keyboard are wireless and run fine at the moment, no flat battery.
First attempt
The screen turned on right up until the galaxy looking screen before te login box, the login box did not appear. There was no other way to turn it off other than from the back again.
Second attempt
I had left it off for another 5 minutes and turned it back on again, The login screen has appeared, I can type in the password,
but this time when I pushed enter, the rainbow wheel appears and has stayed on there for the past half an hour.
Third attempt
I will switch off the modem, leave the computer off for another 5 minutes and then try anf log back in. Since I will be disconnected to the internet I will update you with the progress and whether this has worked or not.
This begun to happen as soon as I entered the password for the internet connection. This macbook (late 2008 not pro) detected the connection from the imac (another computer is trying to access your internet connection-sort of thing) and I pressed ok on the macbook. The model of the modem router is D-Link Wireless N300 ADSL2 Modem router if that helps.
The mac desktop has had an install of snow leopard (so I can not do a restall/reinstall thingy of the current operating system) and all I can find at the moment is the original disks from the box. The mac was originally on 10.5.8.
Please help me to fnd a way in which I can get back into my computer this would be much appreciated.
I am not familliar with any technical terms so please keep it simple as I am a noob :3

Third attempt
I will switch off the modem, leave the computer off for another 5 minutes and then try anf log back in. Since I will be disconnected to the internet I will update you with the progress and whether this has worked or not.
Update:
This time I switched the computer off from the back as there seemed to be no progress made from the rainbow spinning wheel.
I left it for 5 minutes (the computer) switched off the jack and pulled the plug out.
I turned off the modem for 5 minutes.
I turned on the computer without turning on the modem and was able to log in.
I managed to get into the computer and am currently trying out safari to see if the same problem occurs.
5 minutes into hotmail, trade sites and you tube it seems to be going OK.
I guess the computer paicked abit from the new connection perhaps.

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Creating a warning banner at the login screen in solaris 10 GNOME

Similar Messages

Maybe you are looking for