Creating a website which is not viewable outside the office

Hi there,
I'm not overly experienced with website hosting so bear with me on this one!
We have a 10.5.5 server up and running in house providing diary and file sharing. Our company website is hosted outside along with the mail. Now, I have tested a (different) website with mail domain and they seem to work fine.
Basically, I want to take a copy of our website and make sure it all works internally before I change the DNS etc so the rest of the world can see it. I can't seem to see a way to host a website on an OS X Server that isn't viewable to the outside world. Obviously, the website needs to continue to exist before I transfer so I can't just run a copy of the website here and not update DNS as the nameservers will just take me to the site where it already exists.
Any thoughts?
Thanks
Ben

How is your Xserve connected to the internet? You can just start up the Web service (Apache) in Server Admin and move a copy of your site into /Libary/WebServer/Documents. It will be hosted on the internal LAN only as long as port 80 isn't accessible from the outside.

Similar Messages

  • How do we create a promotion which is not out of the box?

    hello,
    how do we create a promotion which is not out of the box?

    Hi,
    You can create a new item item descriptor in /atg/commerce/pricing/pricingModels.xml.
    ~ Praveer

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • Am using short keyboard.  Don't know how to create plus sign which is not on the keyboard. Advice would be much appreciated.

    Am using short keyboard.  Don't know how to create plus sign which is not on the keyboard. There is no number pad. Advice would be much appreciated.

    nicholasmitaka-shi wrote:
    This is a Japanese kana input keyboard, A1242, whioch looks quite as usual except that a few functions have no space on the board and have been ommitted. 
    Is the plus sign really not available on your keyboard at the place indicated on this graphic (to the right of the L key)? You might need to use shift or alt/option or shift+alt/option.
    http://en.wikipedia.org/wiki/File:KB_Japanese.svg

  • When I type in a website address I get another website which is not the correct website

    When I type in a website address, I get another website which is not the correct website. I have never had this happen before

    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Outlook 2013 will not connect to specific networks outside the office

    Outlook 2013.  I can connect to any Wi-Fi network I have attempted...but Outlook 2013 will not connect to my home network.  I have tried clearing the dns cache as well as re-creating the account.  Outlook works fine at the office, fine at
    hotels, fine at restaurants, but won't connect at my house using either a wired or Wi-Fi connection.
    Any suggestions?

    Hi
    As per the information and details provided by you, to connect the Outlook 2013 from outside the office, please follow these steps: -
    This is usually the result of authentication issues. In order to prevent strangers from using their
    SMTP server to send spam, many ISPs require users to authenticate when they try to send email while accessing the server from outside the network. In many cases, users will also need to use a different
    port number and may need to use SSL.
    To check or change the outgoing server authentication, you need to open the
    Account setting dialog. In Outlook 2013, this is on the
    File tab.
    Click on the email account, then click the
    More Settings dialog and select the Outgoing server tab to check the authentication settings.
    Enable
    My outgoing server (SMTP) requires authentication and select
    Use the same settings as my incoming mail server. These settings will often work both at home and when travelling.
    You will also want to check the port and
    SSL settings on the Advanced tab. Commonly used port number are
    587, 465, and 1025 but if these don’t work, you will need to check your mail providers support pages for the correct port number. You may also need to select
    SSL or Auto for encrypted connections, again, this information should be on your mail providers support website.
    Note: - Once you make these changes, you should be able to send email from home.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • I want to load Firefox on my computer at home, which is not connected to the internet. I want to download Firefox to my flashdrive and then add it to my computer at home. When I try to download Firefox, it won't let me change the path of where it download

    I want to download Firefox on a flashdrive so I can then download it to my home computer which is not connected to the internet. When I download Firefox, it won't let me change the path and so tries to download on a public computer, which isn't allowed. The reason I want it on my home computer is because I'm creating web pages and I want to view my html pages using a variety of browsers, including Firefox.

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

    I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    Can anyone please help?

    yellowmledbetter wrote:
    Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
    The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
    The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
    But, here goes:
    Your cameras are newer than your raw converter, so it won't understand them.
    CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
    Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
    All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
    DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
    If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
    All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
    I really should be in bed.

  • I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.

    I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.
    I guess what I have experienced might be a special case of 'Restore previous sessions'. The actual situation was that after I rebooted my laptop, Adobe update jumped out indicating an update being finished successfully. After I clicked on the 'close' button of the Adobe window, it automatically started firefox and linked to its website. But I did not find the 'Restore previous sessions' page this time. Then I restarted firefox, this time there was a start page with 'Restore previous sessions'. However, sadly enough, it is only restored my pinned pages plus the Adobe website. Actually, I am using 'bookmark all tabs' from time to time to secure opened tabs, but this time I did not expect such an incident. I would suggest to improve the 'Restore previous sessions' with multiple time tags and appear in all cases including my reported case here, after updating firefox, crashes etc. I like firefox in most occasions, therefore believe and hope it becomes better and more robust. Thank you very much!

    Hi,
    Please see the following support request: http://forums.mozillazine.org/viewtopic.php?f=38&t=2628065
    I think the best option would be to leave feedback here to let the relevant development team know about the problem you have had: https://input.mozilla.org/en-GB/feedback
    Also you could try the [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] add-on which gives more control over how sessions are restored.
    I hope that helps

  • Web file not viewable on the Internet

    Hello,
    Folks, my web site that was designed with PHP language in Dreamweaver CS4 is not viewable on the Internet and I need help on how to fix this problem from any one that could help me resolve this issue. My web site hosts that I tried to use for hosting my web site, could not help me some claimed that they are not web designers. I need help from any one that could help. Please help me get this right.
    As of now, I have cancelled my web host for this reason. What am I doing wrong? Or, what do I need to do that could make it work?
    Thanks,
    Ody Ibekwe
    Brigma.com

    The next step for you to do is find another web hosting company. One that support PHP, on an Apache webserver. Since you are using the PHP lanuage for development, Apache is a good choice.
    You need to make sure that you define your site correctly in Dreamweaver once you have a new hosting company. Then you can use Dreamweaver for your FTP functions, it works well for this. Save a simple file as index.html and "put" it to your webserver and try to view it with your browser.
    Back to your original post above. It is nearly impossible for anyone to help with your question when you don't have a hosting company  for your website.
    Jim
    Edited: website is still there, it looks like your default document type is not set, or you not allowed to use PHP (contact the hosting company).. Save a simple html file as index.html and see if you can see it.

  • SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

    I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
    I am trying to install Acrobat XI Std silently by SCCM.
    I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
    I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
    Is there a way to check the language specified for ym serial number?
    Bryndon

    Update on a couple of details:
    @Sabian,
    Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
    @Sebastian
    I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
    The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

  • Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

    I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
    It does the same thing when using msi with the command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    Here is my setup.ini file
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.1
    RequireIE=7.0.0000.0
    Require64BitVC10RT=1
    CmdLine=/spb /rs /sl"1036"
    [Product]
    msi=AcroPro.msi
    vcrtMsi=vc_red.msi
    vcrtDir=VC10RT_x64
    Languages=1033;1036
    2052=Chinese Simplified
    1028=Chinese Traditional
    1029=Czech
    1030=Danish
    1043=Dutch (Netherlands)
    1033=English (United States)
    1035=Finnish
    1036=French (France)
    1031=German (Germany)
    1038=Hungarian
    1040=Italian (Italy)
    1041=Japanese
    1042=Korean
    1044=Norwegian (Bokmal)
    1045=Polish
    1046=Portuguese (Brazil)
    1049=Russian
    1051=Slovak
    1060=Slovenian
    1034=Spanish (Traditional Sort)
    1053=Swedish
    1055=Turkish
    1058=Ukrainian
    1025=English with Arabic support
    1037=English with Hebrew support
    6156=French (Morocco)
    CmdLine=TRANSFORMS="AcroPro.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=3
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
    Does it means that the serial number provided was invalid for deploying ?
    NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that.  For now it's only not working at the command line.
    Another important point is that the install works great without customization !  If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
    So what goes wrong ?

    Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
    I retried installing the initial package in French on a Windows 7 English and the software installed properly in French. 
    As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
    Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
    That gave me the cue I needed to know.  I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
    I ran again the same command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    And everything works fine.
    NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first.  Otherwise the installation failed without any error message.
    Thanks again to you for your good hint,
    Bob

  • I put a Favicon on my website, which can be seen in the adress line and the tab header. However, when I add this site to the bookmarks, it doesn't show it's favicon.

    I put a Favicon on my website, which can be seen in the adress line and the tab header. However, when I add this site to the bookmarks, it doesn't show it's favicon. I have tried deleting and creating a bookmark and also refreshing the webpage or clicking on the bookmark. I don't know what else to do. I use Firefox 4.0.1

    I'm getting favicons for most of my bookmarks, so there might be some issue with the coding or the image format.
    Do you use a tag like this in your page?
    <link rel="shortcut icon" href="/path/to/favicon.ico"/>

  • I want to block unknown numbers which is not stored in the contacts

    I want to block unknown numbers which is not stored in the contacts

    Contact your carrier to see if they offer call blocking services.
    If you just don't want to be bothered, you can set a custom ringtone for all of your contacts, then create or download a "silent" ringtone and set a custom vibration pattern of "none" and assign them as the default ringtone and vibration pattern. This won't actually block the calls, but you won't hear it ring and they will roll to voicemail.

  • When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Other than that, what version of iPhoto do you have? Assuming 09 or later try
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD
    P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

Maybe you are looking for