Creating a Wireless Access Point

Hey guys,
My wireless router just died, my linux server has a wireless card in it and I've read that you can use this as a router - is there any documentation on how to do this? I have no clue where to start..

I have always wanted to try this....
just some links may help
http://www.wifi.com.ar/english/cdrouter/
http://www.networknewz.com/networknewz- … outer.html
http://www.easylivecd.com/
I hope that helps please let us know how you get on :-)
MrG

Similar Messages

Creating a wireless access point on a wired ethernet

I am spending a month in Italy and will have a wired internet connection in my apartment. I would like to connect my Airport Express to it so that I can use my iPhone in the wi-fi mode to save on AT&T data charges. I know that this configuration is possible, but there is little documentation to instruct me how to set it up. Any guidance is appreciated.

Hi bob
i have the same problem, i am living in a uni room and connect to uni ethernet.
i have a switch link to uni socket, a wired port to my windows machine, a wired port to airport.
i set my airport express as bridge. i can make my mscbook and ipad share the wireless internet for about 40 minutes (or less) then all my internet is down
even the windows machine can not connect to internet. i have to unplug the wire to the uni socket, disconnect airport and reconnect to the uni socket without the airport, then i will get internet again in my windows....... i could set up airport again but after a certain time, it is in that loop again
do you have any ideas?

How do i set up a wireless access point with ny time capsule

I am using a new Airport Extreme and want to utilize my older TC to create a wireless access point or maybe an aditional router using the same newtwork. What are the steps to set this up?
Thanks
Alamo

You will first need to perform a Factory Default Reset on the Time Capsule.
Resetting an AirPort Base Station or Time Capsule FAQ
Then, temporarily locate it in close proximity (same room or nearby) to the AirPort Extreme.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the tab in the upper left hand corner of the AirPort Utility window that reads Other AirPort Base Stations (1), then click the Time Capsule
AirPort Utility will take a moment or two to analyze your network, then announce that the TC will be configured to extend your wireless network.
Enter a name for the TC (you can use the same device name that you used before if you wish) and click Next.
AirPort Utility will take a another minute or two to configure the TC and then tell you that the setup is complete. Click Done
At this point, power down the TC and move it to a location that is approximately half the distance from the AirPort Extreme and the area that needs more wireless coverage.....to give the TC a good strong signal to "extend"
Power up the TC and wait for the green light and then you are all set.

An Error Occurred while trying to join "my wireless access point"

Hi,
I've been using wireless access for a year and never had a problem connecting.
But starting yesterday I get a +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
I have 2 Mac's and have no problem connecting with the other one. It’s just the IMac.
I tried everything including resetting router, changing password, adding a $ to the password, accessing without password, deleting the whole air port and create a new one, but still getting the same message.
I might need to add, while I was working with the IMac I didn’t use wireless for a few hours, but when I got back to my browser I noticed that I was connected to a different wireless service. (FONFREEINTERNET if it matters) I have no idea why, since I didn’t change it.
Anyways, I tried to switch back to my access point, but it wouldn’t let me. It’ll just give me the +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
Funny is when I use the FONFREEINTERNET access point the internet seems to work fine.
I could look up Google without a problem, but when I tried to connect to Facebook for example it won’t let me. Instead a FONFREEINTERNET page will pop up with some options on how to pay! (by minute/or day/or week…)
I get the strange feeling that they planted some kind of bug/virus!!!
I don’t know what else to do.
Anyone knows that problem? What can I do?
Any help is greatly appreciated!
I researched on FONFREEINTERNET, there’s a spot close to my house/guess that’s the one I used…
http://maps.fon.com/ ZIP CODE 904-0113 and you’ll see a coffee pod, which is about 2 minutes walk from my house.

Hello Tesserax,
I get the same error message again...
I tried the 3 suggested steps again, but unfortunately it did not work.
After a Restart, Sleep or just the awaking from Screensaver mode I’m disconnected from my wireless Network anymore.
Even if the Computer was asleep for just a second!
I am able to fix the problem temporarily with Network Preferences → Assist me → Diagnostics
Choose Airport → Choose network → Enter Password (Even if I check safe password it’ll ask me every time) → and than usually all lights on the left menu switch from red to green and I get the popup message “A Network Change has been detected. Your Internet seems to work fine.” (similar - I’m at work and don’t remember exactly)
And it works fine…until the screensaver comes on or it sleeps again
I have the Problem with my IMac and Mini but the IMac at least remembers my password…
Any Ideas
I’m connected through a Buffalo WZR2-G300N wireless router

Apple TV 2G (Airplay and Homesharing) can only stream from devices on the same wireless access point range??

connection:
40 Mbps Fiber Broadband connection using:
Devices:
1. Main Modem/router (AP1): Huawei HG8245 (provided by ISP) - Wireless enabled.
2. Remote Access point (AP2): Linksys/Cisco E3200 Wireless gigabyte router flashed with DD-WRT v24-sp2 (06/14/11) mini (Cascaded -wired- LAN to LAN from main modem).
3. Wireless Repeater to cover a dead spot (AP3): Linksys/Cisco E1000 wireless repeater.
4. Apple Tv (AT2G) with home sharing/airplay enabled.
5.( Ipad) with home sharing on itunes enabled.
6. Win7 (PC) using iTunes with Home sharing enabled.
all devices are updated to their latest firmware.
In order to cover a large 3 story house with Wifi. I had (AP1) is located on the first floor, while (AP2) is located in the basement floor directly wired by LAN to LAN with (AP1). (AP3) is located on the Ground floor away from the living room to repeat wireless network into the back yard. While (AT2G) is located in the living room on the ground floor right in the middle of both (AP1) + (AP2) while connected via Wifi.
Network SSID, security, passphrase and wireless settings of (AP2) are identical to (AP1) to create a single big LAN/WLAN roaming network where all devices connected to both wireless access points can find/share the others. As understood, it's refered to as bridging.
I have noticed that my iphone/ipad does not show the airplay button anywhere within the wireless network. it seems that the apple TV randomly choses to connect to the AP with stronger signal, or switch to the other in case of a reboot to one of them.
to elaborate further, if i was sitting in the living room (groundfloor), trying to airplay some you tube contents via Wifi to my Apple TV, i may not find the airplay button available all the time, i found out the reason is while i'm wirelessly connected to AP1, the Apple TV was connected to AP2 and both deviced cannot detect each others to enable my purpose. that goes the same for Home Sharing. only if my Ipad/PC and Apple Tv are on the same wireless AP. they would detect each others immediately.
although, the second AP (AP2) is suppose to extend my wireless network of the same subnet in which any device connected can be found.
After all sorts of trial and error tweaking my router/access point, I thought the problem would be due to the Linksys 3200 capability of bridging WLAN and lacks few protocols that enables my purpose. i have flashed the firmware to a DD-WRT, but again, problem was not solved.
I have not tried having my Apple Tv wired to either router/AP, but i assume it may work well if i do so. i still need to solve this wireless connection issue though.
Am i the only one with this problem, would there be something wrong with my setup?
Your feedback is highly appreciated.

You may or may not already have your network set up correctly, it's just that I can't tell from what you have said.
I have a main router provided by my ISP, I have several other Airport Extremes and Airport expresses connected by Ethernet, all set up to bridge the network created by the main router.
Each maker has their own settings, but bridging should be reasonably obvious. In simple terms my main router distributes IP addresses to all devices, the Airports bridge that network by passing these addresses to the devices from the main router. A base station that isn't in bridging mode will distribute its own addresses to the devices connected to it.
I don't really follow your next point.
instruction for configuration vary from manufacturer to manufacturer, the best course of action here is to refer to the manual. If everything is set up properly the addresses of everything on your network will have identical sets of numbers for the first 3 of 4 groups of numbers that make up an address, the last set must always be different. I think the part you are referring to with your DD-WRT is the option to have Ethernet and wifi bridged or not.
Some routers may be easier to configure than others, but generally speaking they should all work with the Apple TV. 5Ghz is less likely to suffer interference but it is much more likely to be blocked by solid objects, it may or may not be an advantage.

IOS 6.0.1 - Problems with certificate based authentication on wireless access point

Hi all
We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure. The numbers of affected devices increased until all iOS 6.0.1 were affected.
Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
"Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
In the analysis of the issue, it turned out that the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
A comprehensive update to iOS 6.1.3 is currently excluded.
Does anyone knows this issue? What else can be done (except from updating)?

I will answer my own question in case it helps anyone else.
It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
To Fix I did the following:
Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW.
I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway. I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
Created some rues on the firewall to allow...
- IMAP-SSL (port993) outbound
- SMTPS (port 465) to yahoo servers outbound
- tcp port 587 to yahoo servers outbound
- https to akamai servers
Most http and https goes through the proxy as it should, BUT...
It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway. I suspect there is a bug in the icloud app?
Hope this helps someone else.
-Bo

Can an iMac serve as a wireless access point server?

I have a current iMac with standard built in wireless capability but I'm on the net with wires (RJ45 twisted pair ethernet CAT5 cables). Can my iMac serve as a wireless access point for a new device in the house (Nintendo Wii)? Is there a setting I can turn on, or software that can be downloaded to have the iMac act as a server instead of just a client on a wireless network? I know that it's best to have dedicated hardware do this, but I'm looking for a software solution to use while I decide what to buy.
Currently I have a DSL connection and a star style home network. The DSL modem has an ethernet cable to a hub, and our 2 macs connect with wires to the hub. (I have an older DSL modem that has no wireless capability, I know that upgrading the DSL connection involves a new modem that includes wireless, but the phone company makes no guarantees about supporting Macs, so I have to do some research first.)
-Ken

If your iMac connects to internet from ethernet cable, you can use airport to share the connection wirelessly by creating a network from airport, then go to system preference > sharing > internet and enable internet sharing. But if you already have a wireless router, Mac should be compatible, there is nothing inherently different between iMac's airport and PC's wireless card.
For Wii, I have no experience myself but there are plenty of posts on this forum, like this one: http://discussions.apple.com/thread.jspa?messageID=4528652&#4528652
(linked to http://www.virtualmatt.com/?p=7)

Can I use iMac as wireless access point?

My network equipment: ADSL modem (which has no integrated wireless) with Buffalo AirStation (802.11b) wireless access point
I have had a reasonably stable broadband situation for a long time (hence the ancient equipment!) and have been able to access the internet via my ADSL modem/ethernet router using ethernet wires from my iMac G5, and two desktop PCs running Linux and Windows. I have also been able to access via the wireless Buffalo Airstation on various laptops over the years. My wife's brand new MacBook has been connecting wirelessly for a couple of weeks.
Until last night...
Then the AirPort signal dropped to zero and a neighbour's network was suggested as the network I need. I looked at the Buffalo Airstation and there was a flashing red light (and flashing green ones as well). Being an experienced chap I turned it off and turned it back on! For about five minutes the Airport signal was back. Then it disappeared with flashing lights as before. Repeated a few times with no change...
I don't know if the problem is related to the neighbour's wireless signal or not but I decided that it could be the AirStation getting flaky so I tried creating a network on the iMac with a view to sharing its wired connection.
I can log on to this iMac network from the MacBook and I have changed the Systems Preferences to share the connection on the iMac but the MacBook says it is not connected to the internet. Anyone got any ideas what I might be doing wrong? Should I be entering the ADSL modem router in the internet connection details (which is what I have done) or should I be entering something else?
Is what I am trying to do even possible? I haven't found any exact parallels in the documentation or the forums...
Any help greatly appreciated!

Does the Buffalo AirStation allow you to change the channel being used?
You can share an Internet connection over Ethernet to other computers using Airport. You set it up in System Preferences Sharing pane Internet tab (if using Tiger). On the MacBook, you should just use the default +Configure Using DHCP+ setting. Be sure you clicked to Start the sharing on the iMac. On the MacBook, be sure you select the wireless network that is the iMac's name.

Make a Powerbook a wireless access point

Is it possible to make my Powerbook G4 act as if it were a wireless access point? I can see where I can create my own network, which I've done, I have a wireless PC laptop which will connect to my mac as it see's the wireless broadcast. However, the PC is unable to go out to the internet on the connection it has made to my Powerbook.
Why do you ask would I want to do that? Sometimes I'm at a location which has one ethernet port and I would like to share that connection with others so I plug in my Mac and want my Mac to act as if it were an access point. I'm not sure of the parameters of what to setup on the PC side as far as gateway and so on and it doesn't automatically configure I assume because my MAC isn't a DHCP server so it isn't serving up what the PC needs.
Any ideas?

Hi Steve,
Thanks for the prompt reply, this is the correct answer but I was aware of the WPA2/AES requirement to enable the higher rates that 802.11n supports. The question was really around whether the 3602 + 802.11ac module was capable of bridging as I found the passage stipulating that the models that supoport bridging are the 1040, 1140 and 1250 series. The problem is I do not have access to this device I was asked the question directly and wanted to find a definitive response.
Hi Richard,
Thanks to you too for the reply, I'm aware the ac module is modular (no external connections) again I have no information around its location or distance. as you have correctly stated usually you'd use some kind of external antenna: patch, yagi, directional of some kind!
I seem to remember that the IOS for the 3600 was a skinny version purely for site surveying but this may have changed. I have been sent the 'show tech' and as Steve has pointed out it had only been configured for wpa tkip, I think the guys installing it must have just tried the express set up via the GUI!!!!
I'll update this post when I get the final results back, the distance it is spanning and the speed that it states it is connected at
Kind regards
Rockford

Can I use my Macbook as a wireless access point?

I have an odd question.
I was wondering if it is possible to use my MacBook as a wireless access point. I am traveling to my parents house for Christmas with my Nintendo Wii, and they do not have wireless internet. Here is what I would like to do:
Attach my MacBook to my parents wired internet hub.
Create a wireless network with my MacBook.
Connect to that wireless network on my Wii.
I know this is an odd question, but it seems fairly feasbible in my head, I'm just not sure how to go about doing it.
Any help would be GREATLY appreciated. Thanks!
Macbook Mac OS X (10.4.8)

Actually, it's quite simple... like Robert said, go to System Preferences > Sharing > Internet and choose to share your connection from built in ethernet with computers using AirPort. Click on Airport options and then specify the wireless "network" name you wish to use and whether or not you want security. If you are only playing games with the Wii, I would suggest not enabling security... It would only make things more difficult... plus when sharing the connection like this, you only have the option of using WEP which isn't really that secure anyway in the right hands. Also, when you specify a network name, choose one with no spaces; this will also make things easier for your Wii to connect. That should do it! Good luck!!
Hope this was a help!

Wireless Access Points - Time Capsule and Netgear

Ok...Netgear support site was completely useless so I am hoping that someone over here can help me out. I think what I am trying to do is relatively simple but for 3 days now I have gotten no-joy.
Here is my current configuration: Westell DSL Modem (wireless disabled) --wired-- Netgear WNR834B (SSID 1, operating b/g mode) --wired-- Time Capsule (SSID 2, operating n mode, connection sharing Off Bridge mode). All other devices are hanging off wirelessly to one of the two routers.
What I am trying to do is add a wireless Access Point (Netgear WN802T) to the picture. I need better coverage on the other side of the house and don't want to run wires. The WNR834B is WDS compatible but I can't figure out how to put it into repeater mode or bridge mode. So I thought my next best bet (before going out and buying even more hardware) would be to try and extend the TIme Capsule network. I have been unsuccessful so far (SSIDs are the same, channels are the same, WEP set because I read somewhere that WPA was not supported in repeater/bridge mode). Is it even possible to use a Netgear Access Point with the Time Capsule (I would think it would work, but I just can't get it to).
I can get the WN802T to be seen in my network, but I can not get it to carry the internet connection.
Any advice or steps would be GREATLY appreciated.
Thanks in advance for any/all help

friars, welcome to the discussions!
Sorry, but the possibility of extending the wireless network created by the Time Capsule with a device from another manufacturer is almost zero. Based on information from other top users, the only Netgear model that is shown as WDS compatible with an Apple base station is a model WGR614 v6.
Take a look at an Apple AirPort Express to "extend" the network created by the Time Capsule. While the Express will also do WDS, the bandwidth on your network will be cut by 50% with the addition of just one WDS device. The "extend" feature on the Express does not impose this type of penalty and it is fully WPA/WPA2 capable as well, much more secure than WEP.
For about the same money as an Express, you might also consider ethernet power line adapters. Almost as good as having a direct ethernet connection. Available from Netgear, Linksys, and others.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Is it possible to remove the iphone history of wireless access points to which you've connected?

So.... I work in a place where there is a lot of security and snooping. There are folks specifically assigned to track down phones in unauthorized places. Their enthusiasm is sometimes annoying.
I leave my phone in a locker outside of the restricted area. However, I recently overheard some of the "snoops" discussing a phone that they had found. They were discussing a specific wireless access point that was in that phone's history, that caused some discussion. Although the phone was located in the locker area, they had apparently discovered it and examined it.
It was my phone.
One obvious course of action is to make sure the phone is always turned off (which I will do), but they have now identified my phone by the APs to which I connect, and I'd like to erase that history.
Is it possible?
Thank you.

Settings > General > Reset > Reset Network Settings.

Wireless access point no longer working with ios7

Upgraded to ios7 and did not change anything. Wireless access point still recognised in settings however no internet connection possible. What's wrong or different with iOS 7?

1. Turn router or access point off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.

N800 no longer detecting any wireless access point

The device is working fine couple days ago, then today when I turn it on, the "connection manager" can no longer see any wireless access point. Not only my home network, also
my neighbor's wlan. My laptop can detect 10 networks
around my house. I try upgrad my os to the latest version and it is still not working. Is anyone has similar experience ? Is it a hardware problem ? Any advice will be
welcome.

It happened to my N800 too just a couple of days ago after I installed a number of applications. I have already removed those applications but the N800 still would not detect the access points that it usually detects with no problem.
It could not detect the WLAN inside our house even if the N800 was physically sitting on top of the router. It would intermittently detect my neighbor's WLAN (the one which I usually use) but it would not log on to it.
I tried removing the battery hoping to reset it but nothing changed.
It also would not connect to my PC via USB. The computer could not detect it. This one happened even before I installed those applications.
Help!!!!

Creating a Wireless Access Point

Similar Messages

Maybe you are looking for