Creating additional conditions using BAPI_CONTRACT_CHANGE

Hi Guru's,
I am using the BAPI 'BAPI_CONTRACT_CHANGE' to create some new conditions records for future validity periods.
But I am getting series of errors with the test data provided. Please let me know what are mandatory parameters to pass for successful creation of new condition record for a contract item.
Right now I am getting an error 'Unit of measure PC not a unit of mass'.
Regards,
Praveen.

I have used BDC method ( MEK1) to update the future prices for contract .
Thanks
Pavee

Similar Messages

When i use function module to create additive costs using KKPI_BDC_ADD_ON_C

Hi,
When i use function module KKPI_BDC_ADD_ON_COSTS_CREATE to create additive costs it shows an error. The error is 'THE OBJECT IS LOCKED BY THE USER SARKARD' the transaction it uses is CK74 for creating.
I have also read about KKP4_ADD_ON_COSTS_CREATE. But i dont know the usage of it..
I think it will be helpful if u can clarify with first FM.
Kindly suggest.
Thank you.
Harsha

Hi Harsha,
I have a similar requirement, but the issue that I am facing is that I can not find any parameter in the FM - KKPI_BDC_ADD_ON_COSTS_CREATE for Valuation Date which is a mandatory field in CK74. How did you overcome that issue, can you please share ?

Create Global Condition using SCCM 2012 SDK programmaticaly

Could someone please help me in creating some simple Global Condition in SCCM 2012 with SDK.
First, I thougth that it will be pretty easy just creating a SMS_GlobalCondition WMI objet instance, but then I found that there is no any information about rules in that object and it seems to be impossible to create just SMS_GlobalCondition instance. So
there should be some another object containing information about rule or expression assigned to global condition.
For now, I found that it seems to be possible to use DcmObjectWrapper, may be someone can give me a piece of advice on how that exactly can be done.
Appreciate any help.

Juke,
Thanks for your reply.
Actually for now I'm trying to do what you recommended.
I found an
article describing the way to retrieve all Global Conditions as a part of assigning them to an application. This part works for me, I'm just checking objects which they use and looking for properties I should specify, but I still was not able to successfully
create Global Condition.
Seems that I still miss some parameters.
When I save wrapper object which is of type DcmObjectWrapper like
((IResultObject)wrapper).Put();
after specifying necessary parameter I got an error:
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Access denied when attempting to retreive configuration item.";
ErrorCode = 1078266380;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspconfigurationitem.cpp";
Line = 2130;
ObjectInfo = "";
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
That would be great if someone could provide me with working example or give some advice on what parameters are required for that objects. Or maybe I'm using wrong way to do that in general.

Create pricing condition using BAPI_CUSTOMERQUOTATION_CHANGE

Hi ,
I have a requirement to update quotation pricing data is condition exists i.e if pricing is already exists , if pricing is not exists it has to create a new pricing condition with the given information .
I am able to update the information using BAPI_CUSTOMERQUOTATION_CHANGE if pricing condition exists ,if pricing condition not existing its not working as expected.
Please guide me..
code i have written
*Conditions
      lt_conditions_in-itm_number = it_quot-posnr.
      lt_conditions_in-cond_type = c_zill.
      lt_conditions_in-cond_value = it_quot-kbetr.
      lt_conditions_inx-cond_count = 1.
      APPEND lt_conditions_in.
      lt_conditions_inx-itm_number = it_quot-posnr.
      lt_conditions_inx-cond_type = c_zill.
      lt_conditions_inx-updateflag = c_u.
      lt_conditions_inx-cond_value = c_x.
      APPEND lt_conditions_inx.
Thanks in advance,
Srinivas.

Hello Srinivas,
Use BAPI_QUOTATION_CREATEFROMDATA in the create scenario. Before calling the BAPI check if the quotation exists. If yes, use BAPI_CUSTOMERQUOTATION_CHANGE.
Regards,
Ajith

How to create additional flows using BAPI_FTR_ADDFLOW_CREATE

Hello gurus!
I am facing a big problem when using this BAPI. When I use this, passing the main parameters of the movement for a financial transaction, the BAPI is executed properly, but nothing is done, nor a message, nor the saving.
All the parameters for a movement area passed to the structure.
Can anyone send to me a mapping of fields or a script of how to use this BAPI?
Thank you very much,
Diogo Patriota.

Hi gurus,
My doubt was solved. It was only to use the BAPI_TRANSACTION_COMMIT after the BAPI call.
I was only testing in SE37, but this BAPI doesn't work like this.
Thanks,
Diogo.

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

Can i create additional apple id's using the same email address for using multiple products with iCloud?

can i create additional apple id's using the same email address for using multiple products with iCloud?

Hi Anne,
I'm pretty sure different eMail addies are needed for different Apple IDs.

New-CMGlobalCondition unable to create New script Condition using Power Shell

I am using config Manger 2012 and trying to use power shell cmdlet to create a new Global Condition using PowerShell but its not working for me using this
Do not understand how to use that command any idea.
New-CMGlobalCondition -DataType Boolean -DeviceType Windows -FilePath file.ps1 -Name test -ScriptLanguage PowerShell
Error comes as
New-CMGlobalCondition : No object corresponds to the specified parameters.
At line:1 char:1
+ New-CMGlobalCondition -DataType Boolean -DeviceType Windows -FilePath file.ps1 - ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.Confi...onditionCommand:NewGlobalConditionCommand) [New-CMGlobalCondition], I
temNotFoundException
+ FullyQualifiedErrorId : ItemNotFound,Microsoft.ConfigurationManagement.Cmdlets.AppModel.Commands.NewGlobalConditionCommand

Hi,
What's your version of SCCM? I ran this command line on SCCM 2012 R2 CU2.
It seems SCCM 2012 R2 CU2 fixed New-CMGlobalCondition cmdlet issue.
"The New-CMGlobalCondition cmdlet incorrectly requires use of the
-WhereClause parameter."
Description of Windows PowerShell changes in Cumulative Update 2 for System Center 2012 R2 Configuration Manager
Best Regards,
Joyce

How can I create additional "Sent Mail" folders so that I can organize my sent mail along the same lines as the inbox? I use Mail v 4.5

How can I create additional or sub "Sent Mail" folders so that I can organize my sent mail along the same lines as the inbox? I use Mail v 4.5.

Thank you for your reply Don, but I had already gone through that procedure and it will only create new mailboxes for received mail. I want to create new mailboxes for sent mail, i.e. the first column being "to" not "from". Under the Mailbox menus there is an option "Use This Mailbox For" but all the options under that (including Sent) are greyed out. Unfortunately the View/Columns option to change from "From" to "To" changes all mailboxes not just the active one.

If I already created additional Apple IDs for use on my kids devices, how can I convert them to "kids" Apple IDs?

If I already created additional Apple IDs for use on my kids devices, how can I convert them to "kids" Apple IDs?

You can't
Family Sharing and Apple IDs for kids
http://support.apple.com/en-us/HT201084
The Apple ID has it's right already set and can not be changed

Additional condition check in using Substitution method...

Hi All,
We are using Substitution method to replace offsetting entry FRE with custom transaction key ZFR for all Finished goods for Purchase account active company codes.
But our requirement is to replace FRE only when it is an off setting entry for FR1 (Freight cost). Could somebody help me in including this additional condition in the Substitution method?
Thanks,
Vamshi

Hi
can you let us know how you managed to replace FER with ZFR... This will help us in replying back to you
br, Ajay M

Creating additional folders on iphone 3Gs when using a pop3 account

I want to add additional folders in my pop3 mail account. The default only gives me inbox, drafts, sent and trash. Can anyone advise how to create additional folders???

Not possible with a POP account. Only supported for IMAP or MS Exchange accounts, and even then the other folders need to be created elsewhere (on a computer or web-based mail client), but they can be used on the phone.

Trying to create a condition on a BW Universe

Hi experts,
I'm trying to create a condition on a BW-Query Universe just like below:
<EXPRESSION> IIF([0HALFYEAR1].[LEVEL01].[[20HALFYEAR1]].[Value] = 1 , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7] , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7]) </EXPRESSION>
i've searched a lot till get this code, but it still giving me an error when I try to execute.
Does anyone can please help me?
Thanks,
Gui Boscolo from BRZ.

Hi David,
Thanks for your answer, I've made the ajustments you have mention, but I'm still getting erros when i'm running a report with an object that contain this 'code':
<EXPRESSION> IIF(@Select(SemestreL01 Semestre Chave) = "1" , @Select(Variáveis de CálculoMontante Projetado Sem1) - @Select(ÍndicesSaldo Aplicado) , @Select(Variáveis de CálculoMontante Projetado Sem2) - @Select(ÍndicesSaldo Aplicado)) </EXPRESSION>
As you notice, now I'm using the @select function, the quotes are in the value of HALFYEAR01 ((@Select(SemestreL01 Semestre Chave) = "1") and removing the IFF function, the expression works.
The problem, is We need to have this IFF function at BO, because we're trying to complement a expression on BW that cannot be changed!! That's my problem at all!
Thanks again!

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
 <CUSTOMER_ORDER_CONF_REP>
 <ORDER_NO>D555809</ORDER_NO>
 <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
 <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
 <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
 <CUST_NAME>Mr.Johan Matts</CUST_NAME>
 <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
 <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
 <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
 <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
 <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
 <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
 <BILL_ADDR_3>Watthala</BILL_ADDR_3>
 <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
 <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
 <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
 <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
 <ORDER_LINES>
 <ORDER_LINE>
 <LINE_NO>1</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1200</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID xsi:nil="1"/>
 <CHARACTERISTIC_VALUE xsi:nil="1"/>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>2</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1500</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>3</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>3</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1000</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>4</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1350</PRICE_TOTAL>
 <DISCOUNT>10</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>5</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
 <PRICE_TOTAL>400</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>2</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 </ORDER_LINES>
 </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1. New Report
2. From Create New Connection-> XML
3. Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4. Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
 CUSTOMER_ORDER_CONF_REP_REQUEST
 CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
 CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1 Billing Address 1
Shipping address 2 Billing Address 2
Shipping address 3 Billing Address 3
Shipping address 4 Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026 LINE_NO CUSTOMER_PART_NO CUSTOMER_PART_DESC SALE_UNIT_PRICE PRICE_QTY DISCOUNT PRICE_TOTAL
Characteristic details belonging to Order line 1 CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
 CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
 CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

Creating additional conditions using BAPI_CONTRACT_CHANGE

Similar Messages

Maybe you are looking for