Creating an embedded Konsole in KDE, need help with "Window Rules"

Hey guys! I hate that my first post on here is asking for help, but here goes nothing:
I've been working on creating an embedded konsole that sits on your desktop, without installing any 3rd party software. The konsole will have certain properties set so that it has no title bar, no border, no task bar entry, completely transparent, etc, so that only the konsole text itself is seen.
I was able to set up the konsole profile and window settings successfully using this link as a guide. The only problem is that using the aforementioned link's method creates a persistent profile that affects all future konsoles.
My goal is to auto start a single konsole that uses a specified konsole profile and a specified window rule, but doesn't affect any other konsoles I open after startup. I've recently learned that a konsole profile can be specified with the "-profile" option which solves the first half, but I still can't figure out a way to have my window rule apply to only the startup konsole and no others.
I'm new to Arch and KDE, so any suggestions would be greatly appreciated.
Thanks!
-Grey

Look at http://userbase.kde.org/KWin_Rules and particularly 'Window Matching'.
Maybe (I didn't test it) using:
Window title - restrict the match to the title of the window.
and
KDE options:
--caption <caption> Use 'caption' as name in the titlebar
Or finding some specific matching rule which applies only to that window...

Similar Messages

Need help with Windows on Bootcamp vs. Parallels

Hello,
I installed windows 7 on a boot camp partition of my hard drive. I also installed windows 7 on Parallels with the same activation key (afterwards).
The activation key is legit, or at least should be, I bought it online.
The issue I'm having after 30 days of use is this: The parallels version of windows is telling me my version of windows isn't 'genuine', I get a black background, but can still use windows and parallels fine.
The boot camp version of windows... (the version I installed first) is running fine, no 'not genuine' messages.
Here are my questions:
1. Am I getting the error because I have 2 versions installed with the same key?
2. The software I need to run is running better on parallels than on boot camp (the interface and resolution look more appropriate and it's just easier to use). I'd like to just delete the entire boot camp partition. Will doing so solve my issue with windows, or should I deactivate windows on that side first?
3. If I should deactivate windows 7 on my boot camp partition, how do I do that?
Thanks for any help.

Thanks for the reply.
I'm not running bootcamp through paralells so I have installed two copies.
Can you tell me what the M$ IVR line is, do you just mean customer service?
Something interesting is that when I checked my code with Microsoft it said that "The product ID number that you entered is not supported in the country that you have selected." Does this ring bells or mean anything to anyone? Does it mean the key was pirated, or just intended for sale in a different country? I bought it from a software retailer online, and I'm assuming it's legit because it runs fine on the bootcamp side. So I'm wondering if this error message could be related to the double install or what?
Can someone provide me a link instructing how to delete the bootcamp partition? Is that a pretty straight forward process?
Thanks

I need help with windows

i know this is the wrong place (being mainly mac and ipod help) but i really need help. i have windows xp. my computer does not allow me to change my desktop background. it won't let me scroll down to different images. when i click on something nothing happens. and certain things like the browse button are not highlighted. what do i do?
Dell Windows XP 5th Generation 30gb ipod (Black)
Dell Windows XP 5th Generation 30gb ipod (Black)

I know this is the iPod forum... but i'll help. Are you the administrator? if you're not then that is probably the reason why. Many corporations do this, or are you a home user?

Need HELP with Windows on my iMac. Thanks.

I'm an experienced Windows user. I bought the iMac 20" Duo Core 2 (2.16ghz) because of the hardware and the design. I want to use Windows XP Pro (then Vista) almost exclusively.
PROBLEM: Windows installed and worked PERFECTLY (without the Mac OS or Boot Camp. I also installed the Mac drivers for Windows. Everything went beautifully UNTIL I started installing the Windows drivers for my external firewire sound equipment. Then the computer wouldn't fully boot. Every manufacturer I spoke with concerning my external equipment said that they did NOT plan to update their drivers to use Windows on a Mac. They said that there are problems and issues with the new Duo Core 2 processor in a Mac running Windows. These are DRIVER issues that may never be addressed by individual equipment manufacturers.
QUESTION: Do I need to reinstall the Mac OS and keep it updated in order to avoid conflicts with Windows' use of the Mac hardware? Or can I simply install Windows only, and try for workarounds?
Thank you very much for your replies.

Thank you, Eric, for your VERY helpful reply.
I've reinstalled Windows XP Pro S2, and got the system up and running again.
The problem I initially had was with the M-Audio Firewire Solo external soundcard. Once the driver was installed, the computer locked during booting. The M-Audio tech I spoke with was exceptionally knowledgeable, and he said they were working on updated drivers for both the Mac and the PC, but not for Windows on a Mac.
The problem could be that the firewire port uses the same IRQ as the hard drive. Although there isn't technically a conflict, the firewire port could be interfering with the boot when it's connected to a phantom-powered unit. And this unit cannot be hot-wired. However, the computer locked simply upon installing the driver with no unit connected.
I've decided to change over to a external soundcard that uses USB instead. I'm hoping this will solve the problem.
I purchased this computer for digital audio recording in Windows. If there are more conflicts that I cannot workaround, I'm going to have to return it and get a PC-based Intel desktop system. I don't want to do that however. I really, REALLY like this machine. But I need it to work with my equipment.
BTW, I've searched the other forums here on Apple.com. Several people have written in about the problems they've had with both the firewire and USB ports - using the MAC OS. So it's not just a conflict with Windows.
I really appreciate your reply. Thanks again.

Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system

My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?

Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

I need help with Windows 10 Technical Preview. No sound. Korean files. Screen Flashes

I installed Windows 10 Technical Preview Yesterday. Took TEN hours!
Now, I have NO SOUND. There are Korean files on my desktop. My screen flashes from blue to my desktop. It is SLOW.
I had Windows 8 before this. I bought this laptop brand new from a store in January of this year.
Can someone help me either fix the issues or help me get back to Windows 8?

it came with windows 8.1 then, the windows 10 preview is still kinda early in the curve so it may have a few problems with your machine
probably be best to wait till the summer when its ready
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Created the following in iShowU and need help for Windows User

I know a Windows XP user who only sees green static type screen when viewing this short tutorial: http://www.abbcfellowship.com/Downloads/registration.mov
The clip was generated using iShowU. Does anyone know why and if I can fix it? I could offer a Flash Version as well, but QuickTime is supposed to be cross-platform. Thanks for any help! The video was captured at 30 fps, h.264 codec, audio at 20 Kz stereo.

I think its been answered:
Help!! How to Link users informations to user page???

Need help with Windows Migration Assistant, as a window pops up and I don't know what to do?

Hiya, so I just purchased a macbook pro and I want to transfer files using Windows Migration assistant.
However whenever I go to do it, the mac connects to the computer and the computer always stays on 'trying to connect to mac'
and sometimes this windows pops up where it says:
'Email
There is no email program associated to perform the requested action. Please install an email program, or, if one is already installed, create an association in the Default Programs control panel.'
I'm confused as I have an email program on the pc ( Windows Live Mail)
However I don't know what it means to create an 'association' and I have gone into default programs control panel to try find this associations and have however I don't know how to make this association as I've searched for the program Windows Migration Assistant, however it isn't there and I'm not sure what to do.
Please help?

OS X 10.9 Mavericks/ 10.10 Yosemite
1. Repair Disk http://support.apple.com/kb/PH5836
2. Reset PRAM: http://support.apple.com/kb/PH14222
Best.

Need help with window sizing in unix

hi all,
i am building an application that will run on a silicon graphics machine with unix. my application has a jframe with a jtabbedpane attached to it. when the application is launched the jframe is the size of the monitors resolution but the jtabbedpane is not. this is not the case on a windows machine. i am using toolkit to get the window size from the machine for the jframe. do i need to use this for the jtabbedpane as well. can anyone help me with this problem.
thanks,

The difference is sizes between platforms may be due to Font-size differences of the components in the tabbed pane which results in the overall size of tabbed pane being different on the two platforms.
To get the tabbed pane to appear the same relative to the frame, you should explicitely 'setBounds' on the tabbed pane as well as size the frame.
Joe Maia

Need help with Windows 7 kernel power issues

Computer: Hp Pavilion p6-2120t/A5T85AV
Windows 7 Home Premium 64 bit
Windows recovered from unexpected shutdown
Ok so I got this computer about 7 months ago, about a month or so after I got it I sent it in for this exact issue and when I got it back it was still happening. So I called, changed some settings and that seemed to work for a while but now it's doing all this again. Whenever I leave my computer idle to go into sleep mode some times it just shuts down, doesn't restart it just shuts off. No blue screen or anything like that. My event viewer lists these as happening 3 times last month and 7 times this month. I'm not sure how to post log files but here's what the event viewer says: I hope someone can help me out it's driving me nuts.
- System
- Provider [ Name] Microsoft-Windows-Kernel-Power [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID 41 Version 2 Level 1 Task 63 Opcode 0 Keywords 0x8000000000000002 - TimeCreated [ SystemTime] 2012-09-21T15:23:38.482419300Z EventRecordID 20843 Correlation - Execution [ ProcessID] 4 [ ThreadID] 8 Channel System Computer AWESOME-AS-**bleep** - Security [ UserID] S-1-5-18
- EventData
BugcheckCode 10 BugcheckParameter1 0x0 BugcheckParameter2 0x2 BugcheckParameter3 0x1 BugcheckParameter4 0xfffff80002c87f2c SleepInProgress true PowerButtonTimestamp0

Hello Whatsername,
BugCheckCode 10 is the decimal version of this error 0x0000000A.
Please start by trying to apply the hotfix that is listed on this Microsoft kb article
Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "S...
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Need Help with Windows 7 Certifications Manager - Can't log on easily

I have to do a complete restore of my 7 Windows Home Premium OS. I downloaded all of the drivers, got everything up and running, but now whenever I use Firefox, the only browser I utilize, I always get the pop-up caution box that states "Do you want to allow the following program to make changes to this computer?" I looked at where the default was set for that message, and it is set according to Windows' recommendations. Even though I have good virus protection (the complete Avast version), I am not comfortable with the thought of disabling the feature completely.
I have no experience with certificates, but with the use of Windows Help, I was able to get to the program, but I found NO program with mozilla in the string.
I think the problem is with a certification, but I have never had this problem before and would very much appreciate any assistance!
Thank you,
Belle

Hello Whatsername,
BugCheckCode 10 is the decimal version of this error 0x0000000A.
Please start by trying to apply the hotfix that is listed on this Microsoft kb article
Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "S...
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

I need help with windows 8 on my pc, PLEASE!

HI, i have windows 8 on my pc. I've been playing games on my computer for 8 months since I bought it. I woke up the other day got on Big Fish to play my games as always, and ever time I push play it starts up then immediately goes back to the play. What
is going on? The game won't stay on the screen, I've tried everything to fix it, please help me.

Hi,
I guess you're referrring to a game named "Big Fish" which is installed in your system, and it stops working, right?
Here're solutions I found on the Big Fish forum:
Check error message.
Update your video card driver.
Kill the game via Task Manager, restart the game.
Run the game as Administrator.
Reinstall the game.
It's recommended to post this issue in Big Fish Forum for they're more familiar with this product.
http://forums.bigfishgames.com/forums/list.page
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Need help with windows install

I am trying to install windows 7 64 bit on my macbook pro 2006 running a leopard OS and it keeps saying select cd rom boot type. what do I do?

You don't need a Windows machine to burn the iso to a DVD, if you use "Disk Utility" just burn it at the slowest speed possible and it should work. (unless your doing the work around to get it to work)
Just make sure you use a program that will make it a bootable image tho, you can't just drag the files over to it and let it burn, it has to end up being bootable in order to boot into the installer.
Apple (Boot Camp) will only support NTFS so as part of installing Windows 7 just chose NTFS as the format while booted from the Windows installer.
Basically, start Boot Camp Assistant, download the drivers, make the partition size you want, (doesn't matter what you format it as now, Windows will do it again with the one you need) it will then boot into the Windows installer and you will eventually get to the part where you can format it to NTFS, it will do it's thing and reboot into the new Windows 7 desktop and you will then install the drivers.
Good luck.....

Newb needs help with windows / g4 network

Hi, I'm brand new to all this so please be patient.
I have an xp machine with an adsl internet connection which is connected to a belkin ethernet wireless bridge. I'd like to connect it wirelessly to my G4 but I can't get my head around all this new lingo.
What do I need to connect them? I have an AirPort Express Base Station and a Power PC G4 (with an ethernet card but no wireless card). My friend told me that all I'd need is the wireless bridge at the pc and the Airport Express Base Station at the G4. I've connected them (G4 and Airport base station) with an ethernet cable but when I try to configure it, it says "No new airport networks were found". Am I completely off track?
Thanks in advance,
Paul
G4 Mac OS X (10.4.2)

Paul
There is very likely an issue with the configuration of the Belkin device.
Check all the settings or reset and reconfigure.
It is very difficult (if nigh impossible) to troubleshoot a device you can't see or see the configuration for.
Things you can try:
• if using any for of wireless security, switch it off and see if that makes a difference
• check the IP address of the Belkin device to ensure it is getting an IP address from the Airport base station.
Or
Purchase a wireless adapter for the G4 which will work such as an Airport card or an ethernet wireless bridge such as the Linksys WET54G.
iFelix

Need help with window drawing thing

Hi all,
This program moves a circle around a screen. It used to work, even in the full screen mode that I have made it in. However, the contents of windowClass that set the attributes of the window (size, full screen, etc) used to be in the run() method of the main class. When I moved them to the windowClass class to tidy up the code, the program for some reason no longer paints the contents of the 'artwork' object to the screen. The KeyEvents still work, and everything. I can't figure out why, because this change was the only one I made between the program working and not working - I have not changed anything relating to the container or artwork at all.
In case you have not figured out yet this is an application, not an applet.
Sorry about the lack of programming notes, this program was just intended as a quick test and while I was writing it I did not see the need. (from the name you can see it started off as a test of KeyEvents but went a little further) If nobody can follow then I will put them in, but I would rather not because that takes time.
Thank you!
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TryEvents extends Thread implements KeyListener
    boolean left = false;
    boolean right = false;
    boolean up = false;
    boolean down = false;
    static Toolkit theKit = Toolkit.getDefaultToolkit();
    static Dimension screenSize = theKit.getScreenSize();
    public static int xWin = screenSize.width;
    public static int yWin = screenSize.height;
    private static TryEvents theApp;
    private static JFrame window;
    private static theArtwork artwork;
    private static Container content;
    private static GraphicsEnvironment environment =
        GraphicsEnvironment.getLocalGraphicsEnvironment();
    private static GraphicsDevice device = environment.getDefaultScreenDevice();
    public static void main(String[] args)
        Thread theApp = new TryEvents();
        theApp.start();
    public void run()
        window = new windowClass("Trying Events", device);
        content = window.getContentPane();
        artwork = new theArtwork();
        content.add(artwork);
        window.addKeyListener(this);
        while(true)
            if(left == true && right == false)
                artwork.moveLeft();
            if(right == true && left == false)
                artwork.moveRight();
            if(up == true && down == false)
                artwork.moveUp();
            if(up == false && down == true)
                artwork.moveDown();
            try
                Thread.sleep(15);
            catch(InterruptedException e) {}
    public void keyPressed(KeyEvent e)
        int key = e.getKeyCode();
        if(key == KeyEvent.VK_LEFT)
            left = true;
        if(key == KeyEvent.VK_RIGHT)
            right = true;
        if(key == KeyEvent.VK_UP)
            up = true;
        if(key == KeyEvent.VK_DOWN)
            down = true;
        if(key == KeyEvent.VK_ESCAPE)
            System.exit(0);
    public void keyReleased(KeyEvent e)
        int key = e.getKeyCode();
        if(key == KeyEvent.VK_LEFT)
            left = false;
        if(key == KeyEvent.VK_RIGHT)
            right = false;
        if(key == KeyEvent.VK_UP)
            up = false;
        if(key == KeyEvent.VK_DOWN)
            down = false;
    public void keyTyped(KeyEvent e) {}
class windowClass extends JFrame
    private static GraphicsDevice device;
    public windowClass(String title, GraphicsDevice device)
        this.device = device;
        setTitle(title);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setUndecorated(true);
        setResizable(false);
        device.setFullScreenWindow(this);
class theArtwork extends JPanel
    int xPoint = 0;
    int yPoint = 0;
    int xcircleSize = 30;
    int ycircleSize = 30;
    int movement = 7;
    public void paintComponent(Graphics g)
        super.paintComponent(g);
        g.setColor(Color.white);
        g.fillRect(0,0,TryEvents.xWin, TryEvents.yWin);
        g.setColor(Color.blue);
        g.fillOval(xPoint, yPoint, xcircleSize, ycircleSize);
    public void update(Graphics g)
        paint(g);
    public boolean canMove()
        boolean canMove = true;
        if(xPoint < 0 | yPoint < 0)
            canMove = false;
        if(xPoint + xcircleSize > TryEvents.xWin)
            canMove = false;
        if(yPoint + ycircleSize > TryEvents.yWin)
            canMove = false;
        return canMove;
    public void moveRight()
        xPoint += movement;
        if(canMove())
            repaint();
        else
            xPoint -= movement;
    public void moveLeft()
        xPoint -= movement;
        if(canMove())
            repaint();
        else
            xPoint += movement;
    public void moveDown()
        yPoint += movement;
        if(canMove())
            repaint();
        else
            yPoint -= movement;
    public void moveUp()
        yPoint -= movement;
        if(canMove())
            repaint();
        else
            yPoint += movement;
}Thank you again!

Okay, just figured out why now, the call to method:
device.setFillScreenWindow(...)
makes the frame visible, so changes to the content pane are not updated automatically, you have to do a content.validate() to make sure that the changes are applied if it is already visible. By resetting the window's content pane content.validate() must be called...
So you could do several things:
1) do the window.setContentPane(content); like I did before,
2) do a content.validate(); after you add drawing to it...
3) move device.setFullScreenWindow(...) from the constructor to run
method after you set up the content pane...

Creating an embedded Konsole in KDE, need help with "Window Rules"

Similar Messages

Maybe you are looking for