Creating an ivew in nw 7.1 sp3

Hi there
i am facing a typical problem, i have created and portal application for km to create an folder and created an ear file using netweaver developer studio
form here i need to create an iview and then assign it to user my when i go to the portal content and repository and look for preview it displays exception id
xx-xxx-10006250
and what selection do i have to take to display it in the portal i have the following option in create i view
can any body explain the steps required to see the above created folder in the portal ..
its a bit urgent , quick reply will be appreciated
thanks in advance.
i have the following options
BEx Web Application iView
Col Room Navigation iView
Collaboration Configuration Template
Crystal Enterprise Report
JDBC Stored Procedure iView
KM Application Log iView
KM Cache Monitor iView
KM Classification Inbox
KM Configuration iView
KM Content Exchange Subscriber Syndicators List iView
KM Content Exchange Subscriber iView
KM Content Exchange Syndicator Offers iView
KM Content Exchange Syndicator Subcribers iView
KM Content Exchange Syndicator iView
KM Crawler Monitor iView
KM Crawler Monitor iView
KM Discussion Group Admin iView
KM Discussion Group Contributor iView
KM Discussions iView
KM Document iView
KM Document~ iView
KM Index Administration iView
KM Indexing Monitor iView
KM Navigation iView
KM Quickpoll Administration iView
KM Quickpoll iView
KM Recent Notifications iView
KM Search iView
KM Subscriptions iView
KM Taxonomy Query Builder iView
KM Taxonomy Trainer iView
KM Taxonomy Update Log iView
KM Transport Monitor iView
KM Transport Service Information iView
KM Trex Monitor iView
KM Upload iView
KM XML Forms Builder Check iView
KM XML Forms Builder iView
Proxy-to-Portlet iView(WSRP)
Related Services iView
SAP BSP iView
SAP IAC iView
SAP MiniApp iView
SAP RFC iView
SAP Transaction iView
SAP Web Dynpro for ABAP iView
Service Map iView
URL iView
Web Service iView
Workset Map iView
XML iView

Hi there,
i am not able to view the option portal application in the templetes
it displays the following optioins , so can you tell me which one do i need to select
i have the following options
BEx Web Application iView
Col Room Navigation iView
Collaboration Configuration Template
Crystal Enterprise Report
JDBC Stored Procedure iView
KM Application Log iView
KM Cache Monitor iView
KM Classification Inbox
KM Configuration iView
KM Content Exchange Subscriber Syndicators List iView
KM Content Exchange Subscriber iView
KM Content Exchange Syndicator Offers iView
KM Content Exchange Syndicator Subcribers iView
KM Content Exchange Syndicator iView
KM Crawler Monitor iView
KM Crawler Monitor iView
KM Discussion Group Admin iView
KM Discussion Group Contributor iView
KM Discussions iView
KM Document iView
KM Document~ iView
KM Index Administration iView
KM Indexing Monitor iView
KM Navigation iView
KM Quickpoll Administration iView
KM Quickpoll iView
KM Recent Notifications iView
KM Search iView
KM Subscriptions iView
KM Taxonomy Query Builder iView
KM Taxonomy Trainer iView
KM Taxonomy Update Log iView
KM Transport Monitor iView
KM Transport Service Information iView
KM Trex Monitor iView
KM Upload iView
KM XML Forms Builder Check iView
KM XML Forms Builder iView
Proxy-to-Portlet iView(WSRP)
Related Services iView
SAP BSP iView
SAP IAC iView
SAP MiniApp iView
SAP RFC iView
SAP Transaction iView
SAP Web Dynpro for ABAP iView
Service Map iView
URL iView
Web Service iView
Workset Map iView
XML iView
thanks in advance
regards

Similar Messages

What do I need to create Flex custom components for Xcelsius 2008 SP3?

Hello, and thanks for your time.
I have recently been roped into creating some custom components in Flex 3 for use in Xcelsius 2008 SP3. I can create custom components in Flex, but I have no idea how to get them into Xcelsius.
I have begun my own research into everything I am going to need, but I am hoping someone out there who has done this can provide a user-friendly itemized list of all the parts that are needed to accomplish this task. I want to make sure I do not miss anything.
Thanks for any insight you may be able to provide.
What I have so far:
Flex Builder 3
Xcelsius Engage Server 5.3 (2008)
What I think I need:
Xcelsius 2008 component SDK
Cheers!
Edited by: midasxl on May 5, 2011 6:11 PM

Hi Manisha,
Even we have a requirement to create doughnut chart in flex and need to add it in xcelisus.I can bulid that in flex and it is working with static data.Please provide me the sample code of how to pass dynamic data from xcelsius excel to this chart and how to create properties file for this chart.I have looked at horizantal slider example but that doesn't help much.
Thanks in Advance.
Regards,
Karthik

"Could not create Java virtual machine" for several XP SP3 clients

Hi,
In this last year I got the message "could not create java virtual machine",
(suddenly, after several mounths without any kind of problem),
on 10-15 XP SP3 clients in our lan, lan in which all the 200 clients (90% XP SP3)
have this application installed.
Every time the solution seems to be different:
sometimes the cause is a virus, sometimes i have to disinstall all Java components
and reinstall only the Java RE 6.0_23 (used by the application),
sometimes I have to make also a system registry cleaning for Java components,
only few times was enough to clear the Java cash, change the kind of Java network connection,
delete the temporary files...
In two situations the problem was solved changing UltraVnc with RealVnc
and only once the user solved himself restarting the computer...
I'd like to know which is the meaning of this message and which steps is better
to follow in order to solve the problem in the shortest time.
Thank You

Thank you
for anwering my question !
Anyway, in all the 10-15 cases I solved this problem, I hadn't to change the amount of RAM...
never... and, once solved, the computer client is ok and the application works without subsequent problems...
So, as I said, i can solve the problem without Knowing the real reason, and often after several
hours... (you can read in my previous comment about a lot of differences solutions...)
The matter is... that I can't understand "how and why" I solve the problem...
Bye

Doubt in creating a variable in Crystal Report 2008 SP3

Hi,
I am new to Crystal Reports, I need to create a variable with the below logic.
No of Subscriptions Pending: COUNT(SUBSCRIPTION_ID) WHERE FCT_SUBSCRIPTION_ACTION.SUBSCRIPTION_ACTION_STATUS IN
(SELECT SUBSCRIPTION_ACTION_STATUS_CODE FROM LKM_SUBSCRIPTION_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'T')
My data source is an universe where I have SUBSCRIPTION_ID, SUBSCRIPTION_ACTION_STATUS, SUBSCRIPTION_ACTION_STATUS_CODE & FINAL_STATUS_FLAG objects.
I have pulled all the required objects from the universe into the Crystal Query.
As we don't have the option to use Where condition in CR (As per my knowledge), I want to know how to write the above logic using "If" or some other function.
Thanks in Advance,
Mitch.

Hi Jamie,
Thanks for your reply & sorry for the late reply, I was away for Christmas.
I tried your formula but it is not working properly.
If I use "IF FINAL_STATUS_FLAG = 'T' THEN SUBSCRIPTION_ID" then it is giving all the subscriptions count instead of pending ones.
We need count the Subscription_ID's based on the Flag Status & the Action_Status & Action_Status_Code as per the formula.
No of Pending Subscriptions: COUNT(SUBSCRIPTION_ID) WHERE FCT_SUBSCRIPTION_ACTION.SUBSCRIPTION_ACTION_STATUS IN
(SELECT SUBSCRIPTION_ACTION_STATUS_CODE FROM LKM_SUBSCRIPTION_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'T')
But your method is not taking Status Codes into consideration (correct me, if I am wrong)
While checking against the Database I found the following results
1) SELECT DISTINCT SUBSCRIPTION_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS
     Result: AM, BA, CA, DC, DE, DO, FI, FU, IN, NE, NO, OH, RE, TC
2) SELECT DISTINCT SUBSCRIPTION_ACTION_STATUS FROM FACT.FCT_ORDER_ACTION
      Result: DC, TC, AM, IN, DE, NE, CO, DO, NO, BA, CA
Values in SUBSCRIPTION_ACTION_STATUS & SUBSCRIPTION_ACTION_STATUS_CODE differ. &
3) SELECT ORDER_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'T'
      Result: CA, DC, DO
4) SELECT ORDER_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS WHERE
FINAL_STATUS_FLAG = 'F'
      Result: AM, BA, DE, FI, FU, IN, NE, NO, OH, RE, TC
Any other way of doing this.
Thanks,
Mitch.

Unable to create mail database

okay, I had 4 hard drives fail at once on my Storage Server,
Lost the VHD for my Exchange VM
Created a new VM, recovered Exchange 2010 SP3 using setup /m:recoverserver
Didn't appear to have any errors until it was time to mount the database, database wouldn't mount.
Tried to create a new database, getting Error 5000.
When I looked under Exchange\V14\mailbox, I can't actually find a copy of my mail database, so, I am not able to mount because I can't actually create a good mail database.
When I try to create a mail database, I get these errors
From EMC
AcmeMail2
Failed
Error:
Couldn't set the System Attendant for database "AcmeMail2".
The requested search root 'Acmenet.local/Configuration/Services/Microsoft Exchange/Acme/Administrative Groups/Exchange Administrative Group (FYDIBOHF23SPDLT)/Servers/Acme/Microsoft System Attendant' is not within the scope of this operation. Cannot perform
searches outside the scope 'Acmenet.local/MyBusiness'.
Warning:
An error occurred while trying to prepopulate newly created mailbox "/o=Acme/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=SystemMailbox{22655608-c412-4e60-baa3-4d716ab38f20}" in database "AcmeMail2" on server "Acme".
"/o=Acme/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=SystemMailbox{22655608-c412-4e60-baa3-4d716ab38f20}" may not immediately be available for certain cmdlets and operations until it has replicated. If you need to run the
cmdlet again, and you want more information about the error, please add the -Verbose parameter. Error: 0x8004010F.
Exchange Management Shell command attempted:
new-mailboxdatabase -Server 'Acme' -Name 'AcmeMail2' -EdbFilePath 'C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2\AcmeMail2.edb' -LogFolderPath 'C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2'
From the Application Log
Event ID 5000
Failed to save admin audit log for this cmdlet invocation.
Organization:
Log content:
Subject: Acmenet.local/Users/Administrator : New-MailboxDatabase
Body:
Cmdlet Name: New-MailboxDatabase
Object Modified: AcmeMail2
Parameter: Server = Acme
Parameter: Name = AcmeMail2
Parameter: EdbFilePath = C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2\AcmeMail2.edb
Parameter: LogFolderPath = C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2
Property Modified: OrganizationId =
Property Modified: Id = AcmeMail2
Property Modified: DataMoveReplicationConstraint = None
Property Modified: RawName = AcmeMail2
Property Modified: RpcClientAccessServerExchangeLegacyDN = /o=Acme/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Acme
Property Modified: Server = Acme
Property Modified: LogFilePrefix = E01
Property Modified: LogFolderPath = C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2
Property Modified: SystemFolderPath = C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2
Property Modified: AdminDisplayName = AcmeMail2
Property Modified: ExchangeLegacyDN = /o=Acme/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Acme/cn=Microsoft Private MDB
Property Modified: EdbFilePath = C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\AcmeMail2\AcmeMail2.edb
Property Modified: DisplayName = AcmeMail2
Property Modified: MasterServerOrAvailabilityGroup = Acme
Property Original: OrganizationId =
Property Original: Id =
Property Original: DataMoveReplicationConstraint = SecondCopy
Property Original: RawName =
Property Original: RpcClientAccessServerExchangeLegacyDN =
Property Original: Server =
Property Original: LogFilePrefix =
Property Original: LogFolderPath =
Property Original: SystemFolderPath =
Property Original: AdminDisplayName =
Property Original: ExchangeLegacyDN =
Property Original: EdbFilePath =
Property Original: DisplayName =
Property Original: MasterServerOrAvailabilityGroup =
Caller: Acmenet.local/Users/Administrator
Succeeded: False
Error: System.InvalidOperationException: Couldn\'t set the System Attendant for database \"AcmeMail2\". ---> Microsoft.Exchange.Data.Directory.ADOperationException: The requested search root \'Acmenet.local/Configuration/Services/Microsoft Exchange/Acme/Administrative
Groups/Exchange Administrative Group (FYDIBOHF23SPDLT)/Servers/Acme/Microsoft System Attendant\' is not within the scope of this operation. Cannot perform searches outside the scope \'Acmenet.local/MyBusiness\'.\r\n at Microsoft.Exchange.Data.Directory.ADSession.GetConnection(String
preferredServer, Boolean isWriteOperation, Boolean isNotifyOperation, String optionalBaseDN, ADObjectId& rootId, ADScope scope)\r\n at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request,
ADObjectId originalId, Boolean emptyObjectSessionOnException)\r\n at Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)\r\n at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession.Microsoft.Exchange.Data.IConfigDataProvider.Save(IConfigurable
instance)\r\n at Microsoft.Exchange.Management.SystemConfigurationTasks.NewMailboxDatabase.SetSystemAttendantObject(MailboxDatabase database)\r\n --- End of inner exception stack trace ---
Run Date: 2014-04-04T19:48:39
OriginatingServer: Acme (14.03.0123.002)
Error:
Exception thrown during AdminLogProvisioningHandler.Validate: Microsoft.Exchange.Data.Storage.ObjectNotFoundException: The discovery mailbox, a hidden default mailbox that is required to search mailboxes, can't be found. It may have been inadvertently deleted.
This mailbox must be re-created before you can search mailboxes.
at Microsoft.Exchange.Data.Storage.Infoworker.MailboxSearch.MailboxDataProvider.GetDiscoveryMailbox(ADRecipientSession session)
at Microsoft.Exchange.Management.SystemConfigurationTasks.AdminAuditLogHelper.CheckArbitrationMailboxStatus(OrganizationId organizationId, ADUser& user, ExchangePrincipal& principal, String& errorMessage)
And Event ID 3154
Active Manager failed to mount database AcmeMail on server Acme.Acmenet.local. Error: An Active Manager operation failed. Error The database was never mounted..
On the Domain Controller, I have run setup /prepareAD several times
Any suggestions?
Don Miller Network Administrator Teton Machine Company

In the case,
the VM is hosted on the Host machine's local drive, the VHD is too.
I created this database about an hour ago (there still isn't a database or log file that has been created), but when I try to mount it manually, I am getting this error
Microsoft Exchange Error
Failed to mount database 'acme'.
acme
Failed
Error:
Couldn't mount the database that you specified. Specified database: acme; Error code: An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred
during a database operation. Error: An error occurred while preparing to mount database 'acme'. Error: An I/O error occurred while attempting to enumerate log files. Error 0x3 (The system cannot find the path specified) from Windows API 'FindFirstFile'. [Database:
acme, Server: acme.acmenet.local].
An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: An error occurred while preparing to mount database
'acme'. Error: An I/O error occurred while attempting to enumerate log files. Error 0x3 (The system cannot find the path specified) from Windows API 'FindFirstFile'. [Database: acme, Server: acme.acmenet.local]
An Active Manager operation failed with a transient error. Please retry the operation. Error: An error occurred while preparing to mount database 'acme'. Error: An I/O error occurred while attempting to enumerate log files. Error 0x3 (The system cannot find
the path specified) from Windows API 'FindFirstFile'. [Server: acme.acmenet.local]
An error occurred while preparing to mount database 'acme'. Error: An I/O error occurred while attempting to enumerate log files. Error 0x3 (The system cannot find the path specified) from Windows API 'FindFirstFile'.
An I/O error occurred while attempting to enumerate log files. Error 0x3 (The system cannot find the path specified) from Windows API 'FindFirstFile'
Don Miller Network Administrator Teton Machine Company

How do I reinstall SP3 for Exchange 2010?

Hello,
I am having some Exchange 2010 issues and am wanting to reinstall SP3, but when I try, I get an error:
Some controls aren't valid:
Please select at least one server role to install.
All of the roles have been installed and I cannot even uninstall a role (greyed out)
I have version 14.3.132.002 of the SP.
Please advise.
Have a great day,
Don

I had the same exact error when running "setup.com /mode:upgrade" to re-install Exchange 2010 SP3.
We never did have Unified Communications installed on our server - but when running the "setup.com /mode:upgrade" it will try to install UC - and fail with the error message that it could not find the file "UMLanguagePack.en-US.msi"
The answer to this is in the path, and here is the 2nd bug for re-installing Exchange 2010 SP3:
I had extracted my Exchange SP3 files to C:\Temp\Exchange2010SP3, I browsed to the \en folder and sure enough, there was the file "UMLanguagePack.en-US.msi" the full path to the file was
C:\Temp\Exchange2010SP3\en\UMLanguagePack.en-US.msi - however, the path in the error message stated it was looking for the file in a completely different path:
C:\Users\administrator.IMA\Desktop\SP3\en\UMLanguagePack.en-US.msi
The solution was to create a folder on the desktop called SP3, copy the contents of C:\temp\Exchange2010SP3 to the SP3 folder on the desktop, and then the installer will find the UMLanguagePack.en-US.msi file that it is looking for.
In your specific case - your installer was looking for the file in 'D:\Tools\Exchange 2010\SP3\en\UMLanguagePack.en-US.msi' - which I'll bet was not the file path you were using to reinstall Exchange 2010 SP3.
My exact error message:
Unified Messaging Role: Failed
Error:
The following error was generated when "$error.Clear();
install-MsiPackage -PackagePath $RolePackagePath -LogFile $RoleLogFilePath -UpdatesDir $RoleUpdatesDir -PropertyValues ("INSTALLDIR=`"" + $RoleInstallPath + "`" ESE=1");
" was run: "Couldn't open package 'C:\Users\administrator.IMA\Desktop\SP3\en\UMLanguagePack.en-US.msi'. This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.".
Couldn't open package 'C:\Users\administrator.IMA\Desktop\SP3\en\UMLanguagePack.en-US.msi'. This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Error code is 1619.
Give a man fire, you keep him warm for a day. Set a man on fire and you'll keep him warm for the rest of his life.

Transction ivew for crm

Hi Experts,
I have to create one transaction iview in portal for crm.
Please give me some details about the steps which i should complete before creating this ivew.
What is the role of SSO in this and what type of system should create for this.
Portal user and crm user r having different userids.So can i use SSO with logon tickets.
Plz give me some details with steps..
Thanks in advance,
John

Hi John,
First of all you should get the CRM system integrated with your portal system so that when you try to run your transaction iview pointing to the back-end CRM system it is able to run the required transaction in the system & execute it properly.
You can use SSO while integrating the CRM system with portals. If the user ids are different in the portal and crm system, just try to use user mapping so that when the portal user tries to logon to the crm system in the back-end it finds a mapped id in there and executes the transaction as required.
While creating the CRM system in the portal landscape you can use SAP CRM system while creating it as the system type. You will also be required to configure the WAS, ITS, connectors, user management and few others.
And creating the transaction iview is as similar as any other iview. Just mention the transaction code which you want to run and refer to the correct crm system in system parameter of the iview.
Award points if found helpful.Hope it helps.
Regards,
Gourav.

Usage of Stored Procedure - BO3.1 SP3

How to use Stored procedure for creating Universe Objects in BO 3.1 SP3?

Hi Christian,
Thanks for your reply.
I think the best thing you can do to reproduce it is replacing the
select pp_tws_seq.nextval
into l_tws_id
from dual
return l_tws_id;
with a simple "return 1;" statement in the function definition and create this package in the database.
By dragging and dropping the function and the procedure within the package in the dataset designer you can reproduce my findings.
The code I've given you is a part of the code generated by the Oracle Developer Tools!. The complete code is quite lengthy, so I didn't include it.
Regards,
Matthieu

Creating a iview for XML Form builder Edit Form

Dear Experts
I have created an XML Form builder application which has Edit from,Renderlist and Show form. I able to create a datafile in by going to content manager. My requirement is to create an iview for Edit form so that i can assignt he ivew to end user to fill this form. I dont want to give content admin to end user.
I need to create an ivew to XML Form builder Edit Form
Regards
Noel

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

Creation of folder in km using kmapi

Hi group,
i am new to the km topic, can any body send me links or tutorials on how to create a folder sturcture using nwds and km api, i tried to fined on sdn but was not able to get correct examples.
thanks

hi Bobu George,
i created a new portal application xyz.ear file(which creates a folder in the km directory) and deployed it on the portal till here it is fine after that i need to create a ivew to view the application in portal
for this i am not able to find the correct iview type in the create ivew option in the portal the following options are listed. which option do i need to selct to create an portal application iveiw as i dont find any options specific to portal application . i am using nwds 7.1 sp3 . any help at earliest would be helpfull
thanks in advance
BEx Web Application iView
Col Room Navigation iView
Collaboration Configuration Template
Crystal Enterprise Report
JDBC Stored Procedure iView
KM Application Log iView
KM Cache Monitor iView
KM Classification Inbox
KM Configuration iView
KM Content Exchange Subscriber Syndicators List iView
KM Content Exchange Subscriber iView
KM Content Exchange Syndicator Offers iView
KM Content Exchange Syndicator Subcribers iView
KM Content Exchange Syndicator iView
KM Crawler Monitor iView
KM Crawler Monitor iView
KM Discussion Group Admin iView
KM Discussion Group Contributor iView
KM Discussions iView
KM Document iView
KM Document~ iView
KM Index Administration iView
KM Indexing Monitor iView
KM Navigation iView
KM Quickpoll Administration iView
KM Quickpoll iView
KM Recent Notifications iView
KM Search iView
KM Subscriptions iView
KM Taxonomy Query Builder iView
KM Taxonomy Trainer iView
KM Taxonomy Update Log iView
KM Transport Monitor iView
KM Transport Service Information iView
KM Trex Monitor iView
KM Upload iView
KM XML Forms Builder Check iView
KM XML Forms Builder iView
Proxy-to-Portlet iView(WSRP)
Related Services iView
SAP BSP iView
SAP IAC iView
SAP MiniApp iView
SAP RFC iView
SAP Transaction iView
SAP Web Dynpro for ABAP iView
Service Map iView
URL iView
Web Service iView
Workset Map iView

How to recover a cold backup (Oracle 9i)

Hello,
We got the following situation, one of our clients wants to switch from Oracle 9i to Microsoft SQL Server 2008.
Our client is located in Singapore and we operate in Belgium, they have sent us an external HD with a media/cold backup of their database.
We also got both the database name and the passwords for the database.
In order to get this database available I have taken the following steps:
1)Created an Virtual Machine with Windows XP SP3,
2)Installed Oracle 9i on this VM,
3)Created a database using the database name and passwords given by the client.
Now I want to recover our clients database, how do I do this.
I know there texts about it, but I need a step for step guide to do this (that's the way I learn by seeing how its done and then reproduce it)
Thanks for any response

After some calls and putting pressure on our client IT I've been able to find out that there either using 11 or 10g.
Also found out that the name they gave me is not the name they use
So I followed the instructions on [http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/create.htm#1000691] , I did find some mistakes in the page
I got the following create database statement
CREATE DATABASE dbname
USER SYS IDENTIFIED BY pz6r58
USER SYSTEM IDENTIFIED BY y1tz5p
LOGFILE GROUP 1 ('D:\dbname\redo01.log') SIZE 100M,
GROUP 2 ('D:\dbname\redo02.log') SIZE 100M,
GROUP 3 ('D:\dbname\redo03.log') SIZE 100M
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXLOGHISTORY 1
MAXDATAFILES 100
MAXINSTANCES 1
CHARACTER SET US7ASCII
DATAFILE 'D:\dbname\system01.dbf' SIZE 700M REUSE
EXTENT MANAGEMENT LOCAL
DEFAULT TEMPORARY TABLESPACE tempts1
TEMPFILE D:\dbname\temp01.dbf' *(The documentation said datafile instead of tempfile)*
SIZE 270M REUSE
SYSAUX DATAFILE 'D:\dbname\sysaux01.dbf' size 700M reuse
UNDO TABLESPACE undotbs
DATAFILE 'D:\dbname\undotbs01.dbf'
SIZE 3984M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED;
after executing
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: 'D:\dbname\control01.ctl'
ORA-27038: file exists
OSD-04010: <create> option specified, file already exist
So what did I do wrong, altough I'm guessing I copied the original files to early
[code="sql"]DATAFILE 'D:\dbname\system01.dbf' SIZE 700M REUSE
Although I did use reuse
I shutdown the database and removed the files to and replaced them with the files from the client,
Mounted the database succesfully and tried to query the metadata
Mixing the information found on
Creating an Oracle Database,
Oracle Recovery Procedure
Got ORA-01219, which is logical since the databse isn't open yet.
I open the database using alter database open
ORA-01157: cannot identify data file 1 - file not found
ORA-01110: data file 1: '/home/oracle/product/10.1.0/oradata/orcl/system01.dbf'
So any ideas want went wrong this time
Edited by: Resender on 19-mei-2011 1:00

UTL_DBWS

After a clean 11.2 install and following the instructions when i use the loadjava for sys I get
loading : class com/sun/jmx/interceptor/DefaultMBeanServerInterceptor$1
Error while creating class com/sun/jmx/interceptor/DefaultMBeanServerInterceptor
$1
ORA-01031: insufficient privileges
ORA-06512: at line 1
genmissing: com/sun/jmx/interceptor/DefaultMBeanServerInterceptor$ListenerWrappe
r
creating : class com/sun/jmx/interceptor/DefaultMBeanServerInterceptor$ListenerW
rapper
loading : class com/sun/jmx/interceptor/DefaultMBeanServerInterceptor$ListenerW
rapper
Error while creating class com/sun/jmx/interceptor/DefaultMBeanServerInterceptor
$ListenerWrapper
ORA-01031: insufficient privileges
ORA-06512: at line 1
why would i have insufficient privileges?
also is there any method to grant to jmx or is it a case I need to add a lib/jar file

to create this issue, i used windows xp sp3. Installed oracle 11g 11.2.0, i then followed the dbws callout example for 11g, however installed the client admin type to %ORACLE_HOME%\dbhome_1.
Following the example used loadjava for the 2 wsclient file. This was the first error seen on the loadjava response
home this is enough info, i also have the oracle weblogic loaded on the same box.

Unable to find par file in the list in EP 7.0 when i export form NWDS

Hi All,
Can any one help me regarding that.
i upload one par file through NWDS by using export.after that when i going to create one iview from par.in the PAR list my par file is not display.
but the par file is avilable is the PCD.
can any one suggest me regarding this issue.
thanks & regards
chitta ranjan bej
portal devloper
EDS-Gems

Hi,
go to System Administration -->Support --> Browse Deployment and browse to the directory ROOT/WEB-INF/deployment/temp
locate the corresponding par file and Download it to your local system. If you observe the file extension, it is "bak", because SAP Portal renames the archives after it deployes the par so that it will not deploy it again. Remove the file extension .bak and rename according to the naming standards of your organization. I would recommend you to use the same naming of the file, remove "sap" and use your own company name, like com.mycompany.portal.navigation.masthead.par.
After this, you can import this par file in NWDS (Netweaver Developer Studio) by selecting File --> Import.
A word of caution, the importing does not import the jar files in the private/lib folder of the project structure. So, copy them manually to the new project you have created.
When you see the project structure, you can find the related file in dist --> PORTAL-INF -->jsp -->
You can change this file according to your needs and deploy it back to the portal.
create the ivew from par
hope it works for you
gunjan

Why does my Acrobat Pro 9 PDF print driver either lock up or become confused as to where it should store a file when printing a document from within the Firefox browser?

I use Adobe Acrobat Pro 9.4.5 for creating .pdf files on a Windows XP SP3 platform. Firefox 6.0.2 is my browser of choice. This question only applies to the .pdf printing process. All other printer drivers work fine with this version of Firefox.
In attempt to save paper, I choose to print most documents in an electronic .pdf format using the PDF print driver and save them to my USB drive. Before upgrading my Firefox version to 6.0.2 this process seemed to work fine but after upgrading the .pdf print process seems to be experiencing problems. This particular printing process will cause Firefox to lock up when the distiller tries to print the file to what I believe is a temporary folder under the Adobe folder. When it does this I am sometimes able to force it to complete the process but frequently it will only produce a log not a .pdf file. On other occasions the distiller will just lock up mid print without producing any kind of error message. In both cases I will frequently have to use Windows Task Manager to break out of the process which then shuts down the Firefox browser. I don't seem to have any problems when I use Internet Explorer to perform the same function. As far as I am aware I am running the most current drivers as Adobe automatically pushes down updates to me as they become available. Any ideas how I can overcome this issue or is it inherent to the new version of Firefox?

The PDF file itself does not control the "print as image" preference, which should always be turned OFF unless there's a specific need to rasterize the entire page, and is turned off by default in all Acrobat and Adobe Reader installations.
What's the filetype for the ultralight font and what export setting* are you using in ID? If you're exporting to earlier than PDF1.7, OpenType fonts will be converted and may experience some small changes in shape if their hint definitions aren't done right.
*As a side note, bear in mind that InDesign does not use any part of Acrobat when exporting PDFs, so questions specific to that stage in the process should be posted to the InDesign forums.

S10-2 is truly a royally disappointing piece of kit.

I have a formidable background covering PC architecture, software and hardware (but Im not here to blow my trumpet). Ever since I received bought my Netbook two weeks ago, after a few days had kicked in I rather wised that I had not....in fact I still have 2 weeks left in which I can return it for a full refund.
Im not going to talk about the legalities of whether it is fit for purpuse, but I do know that any sane person or judge (in the UK) would expect that if you have a computer that it is reasonable that you can upgrade it..... and that's where the fun starts !!!
PROS:
..Lovely gimmicks such as Veriface, but can be fooled by a photo.
..Splashtop quick boot is nice, but Im still trying to figure out why you wouldnt want to boot in the operating system property.
..One Key Recovery. Personally I think it's a great idea, however I still like to perform a Ghost image of the whole hard drive
CONS:
Too many to mention. Where do I start. Well, from a security perspective it would be nice to have granularity of file permissions (which is something the El Cheapo version of XP HOME and Windows 7 Starter do not offer). Me, I would have done some end user testing to see if the Netbook worked well with the market first, rather than engineering something then hoping the market would buy it.
Anyway, firstly the S10-2 came with XP Home SP3, which means it would not intsall XP PRO. So I created a slip streamed XP PRO and SP3 to create a bootable XP PRO SP3 CD that would boot on any machine other than the Lenovo S10-2 (why, not the S10-2, God only knows).
Being a Microsoft Partner and having access to all the software for evaluation purposes, I decided to install Windows 7 Professional. This installed perfectly although it took nearly an hour, but then some minor issues....veriface 3 doesn't work on Windows 7 !! Now, whilst Veriface is not a show stopper,I fail to understand why Lenovo would release some Windows 7 drivers/software, but not all of them. It''s kinda like me selling you a car without the engine.
Anyway, enough ranting and raving for now, I have bigger fish to fry.
However, will say that BARTPE got me out of some hairy issues especially with it's great support for Symantec Ghost.
Although, I said you cant set granular access to files within XP Home (natively), you can run SHRPUBW which will allow you to set shares.
QUESTIONS for Lenovo (or anyone that knows).
When will all the drivers/software be made available so that a user can use Windows 7 with all the software that they would have used in XP Home ????

Humpty,
I noted the S10-2 was missing from the main navigation link on our support site, but could be found once on the consumer support site. I've noted this for the support team and expect the page to be updated soon. In the meantime,   Here is the link to Win 7 32 bit drivers.
Your thread title and commentary seem to reflect an overall level of disappointment.. Aside from your understandable desire to install Win 7, how has the system functioned based on the XP preload?   How is the base hardware? The design, weight, battery life, keyboard feel, etc?
What do you like best about it? What would be highest on your list of things to improve?
Given the price point, how do you feel about the overall value of the system?
Thanks for your feedback,
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Creating an ivew in nw 7.1 sp3

Similar Messages

Maybe you are looking for